Iwould like to fax documents and receive on my Imac

Iwould like to fax documents and receive on my Imac. On my earlier Imac, had program called Pagesender, and worked great. It no longer is supported, and does not work on V 10.7.5. Would love to go back to old ways it was great for me

There are many Internet Fax services available, do a search and compare them, any can be used with your iMac.

Similar Messages

  • Is there a way of opening up old PSD documents and photos on the iMac please?

    Is there a way of opening up old PSD documents and photos on the iMac please?

    .psd (photoshop) files should open in preview to view them and make some simple adjustments. 
    If you want to edit them but don't want the expense of buying Photoshop (or Elements) for your Mac, consider downloading Gimp - it's free.
    http://www.gimp.org/downloads/

  • FAX Print and receive half page

    we are experienced a problem with receiving fax, sometimes we receive half page, the fax call come from PRI to FAX connected to FXS port.
    the following if for the incoming Fax calls
    voice-port 0/0/0
    station-id name FAX-001
    station-id number 046993199
    caller-id enable
    dial-peer voice 2001 pots
    destination-pattern 199
    fax rate disable
    port 0/0/0
    Note : The problem was also with ATA 186 , I replaced it with FXS port but still the same.

    Thanks steven;
    I have one gateway only , it is connceted to the PSTN by the E1 controller here is the show controller e1 and the FXS ports connected to the same gateway.
    'sh controller e1'
    E1 0/3/0 is up.
      Applique type is Channelized E1 - balanced
      Cablelength is Unknown
        No alarms detected.
      alarm-trigger is not set
      Version info Firmware: 20071011, FPGA: 13, spm_count = 0
      Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
      Data in current interval (271 seconds elapsed):
         0 Line Code Violations, 0 Path Code Violations
         68 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         68 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
      Total Data (last 24 hours)
         16330 Line Code Violations, 16 Path Code Violations,
         20848 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins,
         20847 Errored Secs, 0 Bursty Err Secs, 3 Severely Err Secs, 2712 Unavail Secs
    sh call history voice br | i lost
    IP : rtt:ms pl:/ms lost://
    IP 192.168.10.250:0 SRTP: off rtt:0ms pl:171795/0ms lost:0/1/0 delay:60/60/65ms g711ulaw TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    IP 192.168.10.13:31652 SRTP: off rtt:0ms pl:69840/0ms lost:0/0/0 delay:60/60/65ms g711ulaw TextRelay: off
    IP 192.168.10.36:26528 SRTP: off rtt:0ms pl:44640/0ms lost:0/1/0 delay:60/60/70ms g711ulaw TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    IP 192.168.10.27:27628 SRTP: off rtt:0ms pl:37940/0ms lost:0/0/0 delay:60/60/65ms g711ulaw TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    IP 192.168.10.30:24908 SRTP: off rtt:0ms pl:52395/0ms lost:0/1/0 delay:60/60/65ms g711ulaw TextRelay: off
    sh call active voice br | i lost
    IP : rtt:ms pl:/ms lost://
    IP 192.168.10.13:28664 SRTP: off rtt:0ms pl:151925/0ms lost:0/1/0 delay:60/60/65ms g711ulaw TextRelay: off
    IP 192.168.10.53:17166 SRTP: off rtt:0ms pl:45095/0ms lost:0/2/0 delay:65/60/70ms g711ulaw TextRelay: off
    IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
    I already attached the configuration file.
    Thanks a again

  • How can I synchronise my document and email between my iMac and MacbookAir?

    How

    You can use icloud.com for email and document (and photo too).
    Just open System Preferences and add your iCloud account to iCloud settings.
    More information: http://www.apple.com/icloud/

  • My Downloads Folder disappeared and when I found it in my user folder and tried to put it back in the Dock, it looks like a PDF Document and when I close its window it all disappears again. Help!

    I need to know how to get my Download Folder's correct icon back.The folder disappeared and when I found it in my users folder, I dragged it down to the Dock and it turned into a PDF folder icon with a Vise X icon behind it. The icon looks correct in m user folder. I hope someone can help.
    Thanks,             GreyCle

    Hi Barbara
    I'm too slow again, but I have just woken up... where's the coffee

  • TS3992 Is it possible to backup documents and photos from my imac to iCloud?

    I thought it was possible to backup data to the icloud services previously but I can't see how to do this. Is it really only designed for backup of iOS devices and not from a mac? Thanks

    It will only back up data on iOS devices, not computers.  If you want a cloud-based service to back up files and photos you might consider a service like Dropbox, Google Drive, Skydrive, etc.

  • Esignature option in echosign not available after uploading faxed document

    One of my staff members is unable to esign an Echosign document after she uploaded the faxed document. Typically, in the Echosign console, you can upload a faxed document and, after uploading, you are able to esign but lately, this option has disappeared. Did something change with all of the Echosign updates?

    The audit trail also says this (see below). It looks peculiar. I'm not sure why a signed copy was sent out after it was uploaded.
    Document created by RC ([email protected])
    Mar 16 1:42 pm 
    Sent out for signature to [email protected] Mar 16 1:42 pm 
    Viewed by [email protected]
    Mar 16 2:49 pm 
    A signed copy was uploaded by RC ([email protected]) 
    Apr 07 11:21 am 
    Sent out for signature to RC ([email protected])
    Apr 07 11:21 am 
    Viewed by RC ([email protected]) 
    Apr 07 11:22 am 
       Waiting to be signed
    by RC ([email protected])

  • Attempts at installing Lightroom and Cs5 on new iMac

    I just purchased and received a new iMac.  I have used one for a few years and had purchased Lightroom 3 and Cs5 for it.  Now that I have a new computer, I would like to use both programs with it.  But when I insert the cd's to install, nothing happens.  Usually, an installation window appears to step me through the process.  I tried a Mac software (iWork) that I had used with my other computer and did not have any problems so it's not the computer.  I am hoping that I can use these two programs with the new computer, especially since I have several hundred dollars invested in both.  Can anyone tell me how to solve this issue?  Thanks!

    Does your DVD for the installation of the Adobe software works on the Different computer ?
    We need what exactly happen when you insert the DVD in your iMac, does it eject out , stays there but you can hear it reading.

  • Sending and receiving fax documents

    I am wondering if there is a way to send and receive fax documents through my iMac. My internet connection is through a cable modem and have only found a way to fax using a modem. Any ideas would be great. Thanks

    Unless your iMac has a built-in modem port, you will have to use an external fax modem for direct faxing. Otherwise, you can use an internet fax service such as eFax or FaxZero (US/Can only.)
    Matt

  • I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of

    I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.

    Welcome to Apple Support Communities
    When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
    To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
    Respecting to the second question, you will get better answers in the Numbers for OS X forum

  • Sending and receiving faxes from HP3150

    I have an HP3150 connected to my home WiFi network. How can I use it to send and receive faxes?
    Thank you,
    Pete

    Hello @abinrml4,
    Welcome to the HP Forums!
    I understand you would like to know how to send and receive faxes. I will do my best to assist you! What type of printer do you have? Click here to find out: Model Number.
    What type of added features do you have on your fax phone line? Please list this information on this post. I will be looking forward to hearing from you. Have a great day!
    I worked on behalf of HP.

  • 10.5.8, External USB Modem, and Receiving Faxes

    Hello,
    I bought a Zoom external usb modem today, and am attempting to set up my computer to receive faxes on it. I followed the instructions that came with the unit and was able to send faxes. But when a call comes in, the computer doesn't pick up the call. I have the software set to answer on the 2nd ring, but it goes through all 4 rings before the answering machine picks it up.
    Do you have any suggestions on how to get this to work? I'm working on the latest Mac Pro tower, running 10.5.8.
    When I was setting up this machine, I used the option to copy over all the files from my old G4 tower. That tower was running 10.2, had an internal modem, and I was working with FaxSTF. Is it possible an old file associated with that program is causing a conflict with the new software (in that the OS seems to have the ability to answer a call)? FaxSTF won't even detect the external modem on the new tower.

    Hi megamom,
    with an OS after 10.5.5 much people have problems with sending or receiving faxes automatically.
    This solution is a "workaround" and will not affect in any problems, like I saw that they will happen after:
    1.) Removing and changing "IOSerialFamily.kext" : ("The system extension '/System/Library/Extensions/IOSerialFamily.kext' was installed improperly and cannot be used....")
    2.) or go back to OS 10.5.5... (latest security-updates not included)
    Go to your System-Prefs -> Printing and Faxing
    chose the Fax-Modem -> Options
    1.) to receive faxes: choose "receive faxes on this computer"
    2.) to send faxes: choose not to "receive faxes on this computer",
    plug your modem out, wait 5 seconds and plug it in.
    Now you can send faxes, but not receive,
    before you choose "receive faxes on this computer" again.
    To send, you have to start with 2.) again...
    It's strange for a mac, but better than 10.5.5 or a corrupted system...
    APPLE-STUFF: HERE AGAIN: FIX THAT FAX-PROBLEM FOR 10.5.8 QUICK PLEASE - IT'S IMPORTANT!!!
    trollius

  • Is there a Pages for MAC OS 10.7.x? If not, what is the alternative? Concrete issue is that I have received a .pages document and need to edit. Many thanks

    Is there a Pages for MAC OS 10.7.x?
    If not, what is the alternative?
    Concrete issue is that I have received a ".pages" document and need to edit. I am running Mac Pro with OS X 10.7.
    Many thanks

    It is important that you determine if the .pages document originated from Pages ’08, Pages ’09, Pages v1.7.2 (IOS 6), or was exported as Pages ’09 from Pages v5+ on OS X Mavericks. If it meets one of these criteria, then you can edit the .pages document on your Lion machine with Pages ’09 from the iWork ’09 DVD. Pages documents can not be opened with TextEdit, but can be viewed with Preview.
    On the otherhand, if the .pages document was created with Pages for iCloud beta, Pages v2.2.1 (IOS 7), or Pages v5+ on Mavericks, then your only recourse is to edit the document with Pages for iCloud beta. Since Fall 2013, Apple changed the .pages document format into something even more malevolently proprietary. Apple word processing products since this timeframe, are subsets of the Pages ’09 features/functionality, and will filter out content they do not support.
    A Pages ’09 document is usually a compressed (zip) folder archive that looks like a regular file to the Finder. The newer Pages family of products only write out a package that to the Finder, also appears to be a regular file, but in reality it is a folder. The newer Pages documents must be zipped before placed on non-Apple filesystems.

  • Send and receive a FAX without a phone line

    Is it possible to send and receive faxes without a phone line. Instead, can I use bluetooth and cell phone? Or, are there any other options?
    MacBook Pro 15"   Mac OS X (10.4.5)  

    Yes/No. There are internet options, companies/programs that like internet phone dialers allow you to send faxes over the internet that end up calling actual phones. Most (if not all) charge a fee for this.
    As for bluetooth/cellphone, you're better off sticking with internet options. You could use bluetooth if you had a bluetooth device setup to receive and convert but I'm not sure such advices exist and even if they did I'm not sure the value of them. It would be like sending from your laptop while standing next to a fax machine. Cell phones are possible if your phone allows connection via modem which only a handful do. Given a cellphone with modem support and an apple modem, its possible.
    Please remember to mark helpful/solved replies appropriately.

  • HT202879 I downloaded the new version of pages about a month ago.  Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version.  The app store shows the download.  HUH?!?

    I downloaded the new version of pages about a month ago.  Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version.  The app store shows the download.  HUH?!?

    I'm not sure what you mean by it making accessing files more complicated. I have both Pages 4.3 & Pages 5.1 icons in my Dock as well as Numbers 2.3 & Numbers 3.1. I continue to use the iWork '09 versions for my everyday needs. As long as the new versions are in your Applications folder & the '09 versions in the iWork '09 folder, Software Update will not have a problem updating them even if Apple should come out with a new update for the '09 versions.
    Because I have moved the new versions to an external drive & renamed the apps because I want '09 to be the default apps, I do have to remember to move them back to my applications folder & restore the original names before updating. But since you like the new versions this "complication" doesn't apply to you.

Maybe you are looking for