IWS 6.0 SP1 and SP2 throwing startup messages on to console

iWS 6.0 SP1 and SP2 on HP-UX 11.0 are throwing the following messages on to the console constantly
iPlanet-WebServer-Enterprise/6.0SP1 B08/20/2001 01:46
[LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
startup: server started successfully
# [LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
startup: server started successfully[LS ls1] http://cdbmsw2.cdbms_rbi.com, port
80 ready to accept requests
startup: server started successfully
[LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
[LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
startup: server started successfully
can anybody tell the reasons
thanks in advance
regards
Ananda Rao

Ananda,
If you're starting the server from the command line, this is normal behavior. All these messages will output to the console and logs. If you start this from the GUI interface, the output will go to the logs.

Similar Messages

Exchange 2010 SP1 and SP2 are no longer supported.

Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Safari doenst want to open a Website (allocine.fr) and i have a message on the console "kernel: need filter" ???

Hello hello,
I am a french user and i have a big problem with safari.
Safari doenst want to open certains websites ( such as Allocine.fr) and i have a message on the console:
09/05/2014 11:12:18,000 kernel[0]: need filter
09/05/2014 11:12:18,000 kernel[0]: need filter
09/05/2014 11:12:18,000 kernel[0]: need filter
I have already disabled all the plug-ins but the problem is still here!!
Thank you for helping me

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

CR runtime SP1 and SP2 on WS 2003 and IIS 6 report is blank in reportviewer

Hi All,
Could you please help me, No image problem in following scenarios,
Using asp.net 3.5
WS 2003, IIS6, CR runtime 2008 with SP1 = > No images
WS 2003, IIS6, CRruntime 2008 with SP2 => No images
WS 2003, IIS6, CRruntime 2008(No SP) => Works allright.
Of-course I can downgrade but is there any workaround, to combination with SP2 or SP1.
Thank you.
Regards,
Sandeep Sharma
EDIT: Its not like no image but first page is empty, only toolbar is shown. when I export all data is shown in PDF.
Edited by: SSharma on Nov 2, 2009 3:30 PM
Edited by: SSharma on Nov 2, 2009 3:31 PM

Well, I'll go along with something wrong. If you can give me precise steps in how to duplicate the issue. I would like you to also try one of our web samples from here;
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
I recommend vbnet_web_simplepreview and see if you can duplicate the issue with the sample app.
Remember that more than likely, you are not the only one running SP 1 and / or SP 2 and I do not see other reports of the issue you describe in these forums...
Ludek

Sp1 and sp2 integration

I like using WLW 8.1 sp2 but i've to deploy my EJBs to a WLS 8.1 sp1 server. Anyone
knows how can i tell the IDE to use different versions of ejbc or ejbgen?
Thanks.
Antonio.

Seb,
I have a look at the document: http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
I can see where to schedule the Crystal Reprot to run in the background and send out via email option.
However, I dont see how the report can be sent out from BOE server. Is there any setting need to be done so that BOE Server can send out the crystal report?
Please help, thank you.

Is Zen7 SP1 Agent Backwards compatible with Zen6.5 SP1 and SP2?

Looking at deploying the Zen7 SP1 agent, but I'm not certain of any
caveats involved in doing so.
Netware 6.5 SP5 CPR, Zen6.5 SP2 on one server, SP1 on the other.
Thank you for your time,
Troy

I think you need Zen7 on the servers if you're gonna use the Zen7 agent,
there is a compability matrix in the Zen7 docs on the Novell website. You
can use the Zen65 agent with Zen7 on the server.
"Troy H" <[email protected]> wrote in message
news:m9WPg.92$[email protected]..
> Looking at deploying the Zen7 SP1 agent, but I'm not certain of any
> caveats involved in doing so.
>
> Netware 6.5 SP5 CPR, Zen6.5 SP2 on one server, SP1 on the other.
>
> Thank you for your time,
> Troy

Report Server URL field no longer visible in Dashboard Designer after applying SP1 and the October 2011 CU

Environment: 1 WFE on W2K8Ent x64 SP2 | 1 App Server on W2K8 Standard x64 SP2 | 1 Dedicated SQL Server 2008 R2
SharePoint 2010 Enterprise Edition
I recently applied SP1 and the October 2011 CU (Server updates, not foundation) on both the WFE and the App server and now I'm experiencing an issue with PerformancePoint Dashboard Designer in that when I want to deploy a new SSRS report, I no longer have
the ability to indicate the report server url under the report settings section because it's missing. I also do not have the ability to preview the report nor can I modify any of the settings like Zoom or Format as they're greyed out.
I've been researching for several days now and cannot find anything to remedy my issue. I have reviewed the upgrade logs on both the WFE and App server ... I ran the product config wizard after applying the SP and the update ... Sharepoint is configured
to use Windows Integrated Mode for the reporting services configuration via Central Admin.
I noticed that the web config for my app was updated and compared that against a backup of the old web config and I mainly see diffs in version references for reporting services, etc. (Ex. version 10 in the old, 11 in the new/updated config file).
Anyone else out there have this same issue? Any suggestions would be greatly appreciated!
Thanks,
Chad

Ultimately, I ended up installing SharePoint 2010 RTM on a separate system and then copied the folder with the PerformancePoint Dashboard Designer and put that on my PC at work. If you open a PerformancePoint report inside SharePoint, it
will default to the version of the update so be sure to open up the designer from wherever you store it on your PC. You'll know if it's the right one anyways if the URL is missing.
Also, once you've opened the RTM version, this will be the one that opens from the SharePoint shortcut via the Windows Start->All Programs->SharePoint Folder.
Chad Barrett

VPN Plug-in issue with BM 3.9 SP1 and iManager 2.7

Hi,
We have a Netware v6.5 SP7 server with iManager 2.7 . We have just installed
BorderManager v3.9 SP1 and have configured in iManager and have running
ACL's/Proxy. This is working as designed.
We now wish to setup VPN for the first time but each time we select VPN
Services in iManager we get returned "System Error - unknown error" and when
we look in details the following is displayed:
java.lang.IncompatibleClassChangeError\r\n at
com.novell.imanage.vpn.VpnMemberTask.execute(VpnMe mberTask.java:215)\r\n at
com.novell.emframe.dev.Task.execute(Task.java:505) \r\n at
com.novell.nps.gadgetManager.BaseGadgetInstance.pr ocessRequest(BaseGadgetIns
tance.java:849)\r\n at
com.novell.nps.gadgetManager.GadgetManager.delegat eToGadget(GadgetManager.ja
va:4253)\r\n at
com.novell.nps.gadgetManager.LaunchService.onDeleg ateAction(LaunchService.ja
va:86)\r\n at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e
Method)\r\n at
sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39
)\r\n at
sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl
..java:25)\r\n at java.lang.reflect.Method.invoke(Method.java:324)\r \n at
com.novell.nps.gadgetManager.BaseGadgetInstance.ha ndleAction(BaseGadgetInsta
nce.java:2362)\r\n at
com.novell.nps.gadgetManager.GadgetManager.process InstanceRequest(GadgetMana
ger.java:1606)\r\n at
com.novell.nps.gadgetManager.GadgetManager.process ServiceRequest(GadgetManag
er.java:1062)\r\n at
com.novell.nps.PortalServlet.handleFrameService(Po rtalServlet.java:505)\r\n
at com.novell.nps.PortalServlet.processRequest(Portal Servlet.java:373)\r\n
at com.novell.nps.PortalServlet.doPost(PortalServlet. java:279)\r\n at
com.novell.nps.PortalServlet.doGet(PortalServlet.j ava:262)\r\n at
javax.servlet.http.HttpServlet.service(HttpServlet .java:689)\r\n at
com.novell.emframe.fw.servlet.AuthenticatorServlet .service(AuthenticatorServ
let.java:322)\r\n at
javax.servlet.http.HttpServlet.service(HttpServlet .java:802)\r\n at
org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(Application
FilterChain.java:252)\r\n at
org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterCh
ain.java:173)\r\n at
org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.ja
va:214)\r\n at
org.apache.catalina.core.StandardValveContext.invo keNext(StandardValveContex
t.java:104)\r\n at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:520)\
r\n at
org.apache.catalina.core.StandardContextValve.invo keInternal(StandardContext
Valve.java:198)\r\n at
org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.ja
va:152)\r\n at
org.apache.catalina.core.StandardValveContext.invo keNext(StandardValveContex
t.java:104)\r\n at
org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase
..java:540)\r\n at
org.apache.catalina.core.StandardValveContext.invo keNext(StandardValveContex
t.java:102)\r\n at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:520)\
r\n at
org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:137
)\r\n at
org.apache.catalina.core.StandardValveContext.invo keNext(StandardValveContex
t.java:104)\r\n at
org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:118
)\r\n at
org.apache.catalina.core.StandardValveContext.invo keNext(StandardValveContex
t.java:102)\r\n at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:520)\
r\n at
org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java
:109)\r\n at
org.apache.catalina.core.StandardValveContext.invo keNext(StandardValveContex
t.java:104)\r\n at
org.apache.catalina.core.StandardPipeline.invoke(S tandardPipeline.java:520)\
r\n at
org.apache.catalina.core.ContainerBase.invoke(Cont ainerBase.java:929)\r\n at
org.apache.coyote.tomcat5.CoyoteAdapter.service(Co yoteAdapter.java:160)\r\n
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyo teHandler.java:300)\r\n
at org.apache.jk.common.HandlerRequest.invoke(Handler Request.java:374)\r\n
at org.apache.jk.common.ChannelSocket.invoke(ChannelS ocket.java:743)\r\n at
org.apache.jk.common.ChannelSocket.processConnecti on(ChannelSocket.java:675)
\r\n at
org.apache.jk.common.SocketConnection.runIt(Channe lSocket.java:866)\r\n at
org.apache.tomcat.util.threads.ThreadPool$ControlR unnable.run(ThreadPool.jav
a:684)\r\n at java.lang.Thread.run(Thread.java:534)\r\n
Upon looking on the logger screen of the server the following is displayed
when VPN Services is selected in iManager: Task 514 ....
java.lang.incompatibleclasschangeerror
I reapplied the VPN schema extensions also uninstalled and installed the
VPN.NPM from BroderManager v3.9 SP1 plus restarted Tomcat - same error
occurs. Nothing shows up in the forums or the Novell site regarding this
error.
Does anyone know what might cause this and how it can be rectified. Until we
correct this we cannot configure VPN Services at all.
Cheers,
Dale.
Kind Regards,
Dale Bentley
Network Help

Craig,
Thanks for the feedback ... much appreciated.
Yes the standalone version works fine and we can configure VPN. However that server version we would like to run still throws that error - not sure what I can do to fix that one.
Regards,
Dale.
Kind Regards,
Dale Bentley
Network Help
>>> Craig Johnson<[email protected]> 29/08/2008 4:03 pm >>>
In article <[email protected]>, Dale wrote:
> Does anyone know what might cause this and how it can be rectified. Until we
> correct this we cannot configure VPN Services at all.
>
I hate those sorts of errors.... Gonzalo told me java errors are easy to
figure out, but not for me. I usually find the clue in the first line or two,
while the rest of the error message is just a reaction to the first problem.
That said, what I THINK is happening is that you are either missing a needed
java bit, or are using an incorrect version. (When you track down the fix,
they usually end up being simple, like copying a file to some location, or a
subdirectory of files).
I would try downloading and setting up iManager 2.7 mobile on a PC, and
installing the BM 3.9sp1 iMan 2.7 plugins. Bypass any tomcat issues on the
server that way. If it still fails, then there may be some NDS issue, but
let's start with a different iManager installation.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Upgrade App-V 5.0 sp1 to SP2 Hotfix4

long time reader first time poster
we currently have a App-V 5.0 SP1 native environment, we deploy the App-V client via SCCM and use the MSI in the command line ( msiexec
/i "appv_client_MSI_x86.msi" /q /norestart ACCEPTEULA=1 /l "C:\<log directory>" )
I would like to upgrade our environment to SP2 HF4 ( in a test lab first and then schedule to live )
Now is it better to create 2 new SCCM packages one for SP2 and one for the HF4? or is there a way to combine them?
also would you put the ClientUI install in the same package?
any advice or web URL either way would be very much appreciated

just to add, I am unable to get Hotfix 4 installed successfully either via a command line ( Msiexec /p mspfile ) or right clicking the MSP and selecting Apply
The HF installs and once you reboot you are no longer able to use App-V 5.0 Client UI or any of the App-V delivered apps.
The client has SP1 and was then upgraded to SP2 using the command line in my top post without the hotfix installed works as expected.
Does anyone have a guide to how to use the MSP file?
Update - it appears that the Hotfix removes the SP2 client

Patch Plumtree Foundation 6.0 SP1 to SP2

Hi,
we would at like to patch our installation of 6.0 SP1 to SP2 which is available since April 2008 (we cannot upgrade to 6.5 or even 10gR3 yet).
I think I have downloaded everything related to Foundation 6.0 and searched all possible plumtree, bea and oracle sites now but I didn't find any instructions how to apply the service pack.
The only document which was updated in 2008 are the Release Notes (http://one.bea.com/portal/server.pt?open=18&objID=2795854&mode=2&in_hi_userid=2&cached=true). The installation plan which was part of the 460MB download has a section for SP1 installation only and that's it.
So are we supposed to install the whole thing AGAIN to get SP2? Did anybody ever patch 6.0 SP1 to SP2?

Hi guys,
AFAIK, BEA doesn't release standalone maintenance pack for 6.x basically. In other words, the only way to upgrade is to use the 6.0 SP2 or 6.1 MP2 installer on top of previous version.
The only patch I know is for 6.1 MP1, there is a patch. So after applying, it should be 6.1.1.1.
I've done a the following upgrade so far, using the new installer and they work:
6.1 -> 6.1 MP1 -> 6.1.1.1 -> 6.1 MP2
6.5 -> 6.5 MP1
I haven't done the 6.0sp1 to 6.0sp2 but I guess it is the same thing. Do remember to run the installer on to upgrade all related components, check your deployment architecture.
Hope this helps.
Terry

Upgrading from sp1 to sp2

Team Portal -
I just upgraded my application from Sp1 to Sp2 (basically right click on application
and select Install -> Update Portal Libraries).
Do I need to do anything to the domain, or just rebuild and redeploy the ear file?
Thanks
Regards,
Neeraj

I didn't do anything to the domain, but I did "install portal" and "install
weblibs" too.
I first did only the update too I think, work perfectly till I made a simple
jsr-168 portlet with the wlw wizard that didn't work.
Thank you for any and all help,
Geoffrey
"Neeraj Harlalka" <[email protected]> schreef in bericht
news:3fe72282$[email protected]..
>
Team Portal -
I just upgraded my application from Sp1 to Sp2 (basically right click onapplication
and select Install -> Update Portal Libraries).
Do I need to do anything to the domain, or just rebuild and redeploy theear file?
>
Thanks
Regards,
Neeraj

Exchange Server 2007 sp1 to sp2 upgrade error

Hello,
I am trying to upgrade exchange server 2007 to exchange server 2010 but my exchange server 2007 is running sp1 which cannot be directly upgraded to exchange 2010. To do this I need to first upgrade my exchange server 2007 sp1 to sp2, i am stuck because I
keep getting the error below:
Error:
The well-known object entry with GUID 6c01d2a7-f083-4503-8132-789eeb127b84 on the otherWellKnownObjects attribute on the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=mw refers to a non-USG CN=Exchange Servers,OU=Microsoft
Exchange Security Groups,DC=domain,DC=mw. Please either delete the well-known object entry or promote the target object to a universal security group.
Does anyone know how to resolve this error?? please assist

My recommendation to you is to upgrade it to Exchange 2007 SP3 with latest Rollup Updates.
Note: Before you start installing the SP3 make sure you upgrade the AD Schema for Exchange 2007 SP3.
For the error you are getting
https://social.technet.microsoft.com/Forums/exchange/en-US/a9d56cc7-dbf8-401c-b4ea-1bfd3c1f13fa/problems-installing-exchange-2007-sp1-ghost-guid?forum=exchangesvradminlegacy
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Where is System Center 2012 for download? I see Sp1 and R2

I have a DPM 2010 install that I am going to upgrade to 2012.
After doing a bunch of reading on here and other documentation,
a DPM 2010 -> 2012 in place upgrade is supported
but 2010 -> 2012 Sp1 or R2 is not supported.
Ok fine...Where the hell can i download the plain 2012?!?! i can't find for download on microsoft's site at all.
Can someone help me out with this?!?
Sp1 and R2 i can find all day long, i even find the 2010 eval version but the 2012 without sp1 is nowhere to be seen.

If you are planning to upgrade to 2012 R2, when doing the planning make sure your DPM Install is running on a atleast Server 2008 R2 with SP1, and that your SQL Server that is hosting the DPM Database is running atleast SQL Server 2008 R2
with SP2.
Also make note that if you bring DPM up to 2012 R2 you can for the time being not backup Server 2003 and Server 2008 operating systems.
Kind Regards,
Tobias

XP SP1 and Signed drivers

Ever since I downloaded XP SP1 and re-installed some of the same drivers I had from MSI (vga/lan/sound) for my 845G Max L board, the drivers are no longer digitally signed. I think it has to do with something about HCT 10.0 and HCT 11.0. Does any know what is going on? Is MSI going to re-certify their drivers for HCT 11.0?
?(

As of Firefox 13.0 one needs at minimum Windows XP SP2. The last to work on SP1 was Firefox 12.0
http://www.mozilla.org/en-US/firefox/12.0/system-requirements/
http://www.mozilla.org/en-US/firefox/13.0/system-requirements/
http://www.mozilla.org/en-US/firefox/27.0/system-requirements/
edit: The last security update for Fx 3.6 was 3.6.28 and not 3.6.22

XP Profession SP1 or SP2

Does anyone know of a way to check and see if my version of XP Professional is SP1 or SP2? I've had it for a while and had it loaded on an evil Windows based machine...since then that machine has passed away. I previously had it running through parallels and ran great. Had the random shut down issue and uninstalled it to be safe. Considering boot camp. Suggestions? Help? Anti-Windows? Input would be awesome. Thanks

It should be printed on the disk itself whether it has SP1 or SP2. If it is SP1, you can create an SP2 disk through a process called slipstreaming, but you do need a PC in order to do it.

IWS 6.0 SP1 and SP2 throwing startup messages on to console

Similar Messages

Maybe you are looking for