IX12- 300r data verification in the middle of the day and cant access shares.

The raid verification has kicked off in the middle of the business day and has degraded performance to almost unusable. This is a big volume at 18Tb so should send users home.
No way to turn this off once it has started and appears no way to schedule when it is going to run.
Anyone found a work-around for this... really have not hit this issue before with older firmware so not sure if its a new firmware issue or we have just been lucky. Currently on 4.0.4.146.
Any basic raid controller with raid and data verfication you can schedule, appears not to be the case with Lenova EMC solutions that makes them unusable in a corporate envirnment. 

It is unfortunate to hear that as well as the device should automatically detect the new disk and rebuild the RAID array. If the replacement hard drive is not a Lenovo approved drive or was not received from an authorized reseller, the device may not detect the hard drive.
For a list of approved drives: Which hard drive brands and models are approved for use with the StorCenter ix12-300r?
If the replacement is not from one of our resellers, it is recommended to clean the device before use: Cleaning a hard disk for use with an ix or px network storage device   
 Also, is this device in warranty? You may as well want to call in to technical support to make sure that the device is functioning properly and the firmware is not corrupted. 
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

  • Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month?  I can repeat on the date but not the day of the month.

    Is there a way to repeat an activity in the calendar monthly on the same day, i.e., the 2nd Wednesday of each month?  ( I can repeat on the date but not the day of the month.)

    Not with the stock calendars app.

  • TS2634 What if your iPod touch is reading that the date is in the 1800s and will no longer update the web and music that is "recent"?

    My iTouch is reading that the date is in the 1800s and will no longer update my "recently purchased" songs or update websites.

    Go to Settings>General>Date & Time and correct the times/date. Also, in Settings>General>International make sure the Calendar is set to Gregorian.

  • Test-OutlookConnectivity fails with '[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sites'.

    I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
    Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
    ...errors with the following output:
    An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
     Additional information:
     [Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
    es..
        + CategoryInfo          : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
       OutlookConnectivity], CasHealthStorageErrorException
        + FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
    I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG.  The command works well if run a CAS server in the active DB site.

    Hi,
    Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
    https://www.testexchangeconnectivity.com/
    Thanks,
    Simon Wu
    TechNet Community Support

  • How can I add the date at the top of the screen along with the day and time display?

    Hello,
    How can I add the date at the top of the screen along with the day and time display?
    Thanks so much!

    Open System Preferences>Date & Time:
    Ciao.

  • Position of the days and dates being on the right side of the day in the week calendar.

    I'm having a huge problem with the days and dates being on the right side of the day in the week calendar. Can I change that to the left upper side?
    it makes the whole schedule off balance you see.

    Thanks for stating that. So quickly. That *****. I also now see that more people have problems with this. Where can I complain?

  • Can I get the date to display along with the day and time

    can I get the date displayed with the day of week and time?

    Hi Mary, you can, but what version of OSX are you running on what Mac?
    See if this helps for starters...
    http://paulstamatiou.com/how-to-display-date-in-os-x-menu-bar

  • How to set the default value of an item type DATE PICKER to the day of yest

    Hi
    How to set the default value of an item type DATE PICKER to the day of yesterday ?
    Thank you very much !
    Christian.

    Hi Christian,
    Have a look at this thread Re: Default the Date Picker to Today
    It covers this issue in detail.
    Regards
    Paul

  • I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?

    I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?
    Many thanks for any advice.
    David

    You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

  • Invalid text value. A text field contains invalid data. Check the value and try again

    Hello,
    I am having a problem with the error mentioned in the title. I see alot of others have experienced the same problem, but I have quite a twist to it.
    I see the problem when I try to edit a list item, and then try to save the changes.
    Here what I see in the ULS log:
    System.Runtime.InteropServices.COMException: Invalid text value. A text field contains invalid data. Check the value and try again  
    at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId,
    Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter
    pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)   
    at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean
    bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback,
    ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
    I have 3 front end servers(fx wfe1, wfe2, wfe3).  And here is the twist.
    If I access the library directly through wfe1 and wfe2, I get the error. If I access the library via wfe3 if works just fine.
    So because of this, I think it is safe to assume that is has nothing to do with the character limit of 255. Nor does it have anything to do with the field type, since it is already set to mulitible lines of text.
    So. Any ideas?
    Regards,
    Michael
    mic

    Check if there is any change in web.config of these servers
    http://support.microsoft.com/kb/2880758
    To work around this issue, limit the length of the personal message in the invitation to 256 characters or less.
    This is a known issue. Microsoft is working to resolve this issue.
    http://social.msdn.microsoft.com/Forums/en-US/7bb16e51-e7cc-439e-a8b3-755683ccac1a/max-length-on-custom-field-types
    To solve the problem you may have to change the field's parent type to "note". To do that you have to open your fldtypes... file under Templates/xml and change the line to:
    "<Field Name="ParentType">Note</Field>" from "<Field Name="ParentType">Text</Field>"
    You might also have to add a sql type if your text needs to be longer than 255 characters
    <Field Name=”SQLType”>ntext</Field>
    and inherit from SPFieldMultiLineText instead of SPFieldText
    If this helped you resolve your issue, please mark it Answered

  • When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totaly invisible why So ?

    When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totally invisible why So ?

    Hi Ranendra,
    For basic understanding of Dashboards and Models you can use standard Templates or samples which ll come along with dashboard designer(Formly Xcelsius) installation.
    For path   File-->Templates(or Samples).
    Under Templates you ll have different categories and for each you ll find the dashboard Templates.
    Regards,
    Venkat P

  • Is there any way to spy the data communicating between the GPIB and the PC.

    HI
    I have a device communicating with my PC using IEEE 488 GPIB card. Do we have any way to spy the data exchanged by the device and the PC running a different application.
    I am trying to program an application that needs to gather data from a HP 54602A - 150 MHz - 4 Channel oscilloscope using a IEEE 488 add-on card. I am able to talk to the device and request the device number through MAX. I need to know the other commands to the oscilloscope. Can any one help me in this regard.
    With Regards
    S.Gopal

    Launch NI Spy (Start >> Programs >> National Instruments >> NI Spy). You may want to configure it to capture 64k of data instead of 64 bytes since the strings sent to the device may be larger than 64 bytes.
    Start capturing with NI Spy and then run the application. All of the calls made to the device will be captured in NI Spy. You can then look at the data buffers to determine what strings are being sent to your device.

  • How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm?  I have the app installed on my iPad and can't get it to play!

    How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm?  I have the app installed on my iPad and can't get it to play!

    I haven't received an answer. I hope someone can answer this because it's an ongoing problem that I can't play some CDs on my MacBook Air (see my original post for the details). Anyone? Please? Thanks in advance!

  • How to change the day and time seen on the calendar

    Hi.
    I am a bit confused as to how to restrict the day and time shown on a calendar.
    The ical help says this:
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
    Anybody got any ideas?
    Thanks
    David Tobin

    OK, but what did the help menu mean when it said..
    To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
    To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
    To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
    This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
    Have you any idea how to achieve this, as i don't see the popup menu suggested with...
    To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
    I am confused!!
    Any other ideas?
    David Tobin

  • Error 1053 when starting the Routing And Remote Access service

    Hi all,
    When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
    Could some one help me please.
    Than's.

    Hi MRAB,
    Please check if all dependences are enabled first.
    Then set the start type to Automatic.
    Does this issue still occur after a restart?
    Alex Zhao
    TechNet Community Support

Maybe you are looking for