Ix2-200 VERY slow accessing files via osx 10.10

ix2-200 running fine. Drives are good. Using latest firmware 2.1.46.30093.
Can manage via browser just fine.
Connect to server using smb ipaddr and it mounts up just fine.
I can open the directory (using osx 10.10.1) with finder just fine, but when I try to access the files within the directory, nothing shows up (I know the files are there) and can hear/see drive activity (blue light flashes). If I wait an hour or so, I can start seeing files. Since this is a laptop, it's not possible to always leave it connected and waiting at least an hour after connecting to it is not acceptable.
How can this issue be resolved?
Thanks
Bill

Hello morber
Try connecting to the ix2-200 via AFP instead of SMB/windows file sharing on your Mac.
Finder> Go> Connect to Server, there enter the ip address of the unit and proceed. It should ask which share folders to access and if secured, enter the NAS user account credentials.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

Updated to firefox 4.0. since then my computer is very slow accessing the internet, websites and getting information from within a website.

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

Very slow upload speed via infinity 2 (business) u...

Very slow upload speed via infinity 2 (business) unlimited after phone line fix (street cabinet) ?
Had my line fixed today by engineer (no dial tone).
Download rate near normal but upload = 0.73Mbps!?
I reset modem and router after he left and appreciate my profile is probably in need of some TLC after a weeks line fault, but is this normal in this situation? I heard it can take some time to reprofile my line and before it was fixed it was even worse at 0.10Mbps
Just seems very low considered the line is now operational again.

48Hrs+ on from residential line reconnection my business infinity 2 broadband upload speed is now approaching normal speed levels.
What a 10 days that was all because some ass disturbed the cabling in the street cabinet!
Yes I'm aware I have business broadband and am talking about it in a residential based forum, but my actual phone line is still residential that it is supplied over and the business broadband product is much the same animal as that supplied to residential customers i.e. Infinity 2 Unlimited. Only the mail and option of static i.p. appear different - that is all.
Jeez.

Link aggregated between NAS and a switch: the Mac as a very slow access...

Hello,
in my Office we're working with Macs and PCs and all the data is on a NAS.
Here is our configuration:
NAS <-link1->Switch<-Link2->Macs or PC.
Macs are connected with AFP protocol (because SMB is very slow).
We want to use Link Aggregation between the NAS and the switch (with 802.3ad procotol) but when we do that all the Macs have a very slow access to the NAS. But all is OK with the PCs.
What can we do? Is there a problem with macOS X and link aggregation?
Thank you for your help.
Nicolas

Sorry, not sure what the question is exactly.
You must have an Xserve, or Ethernet cards capable of Jumbo Frames for one, I assume the Switch & NAS are capable?
Possible clues...
http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c3ha3.html
http://discussions.apple.com/thread.jspa?threadID=1715388&tstart=0
http://www.macnn.com/articles/04/06/21/link.aggregation.for.macs/
http://www.smallnetbuilder.com/content/view/30556/53/
http://www.afp548.com/forum/viewtopic.php?showtopic=8309

OSX 10.6.7 copy photo to network drive very slow preparing file

I want copy photo to folder ID Photo Server 2011 on NAS ***(folder ID Photo Server 2011 have photo about 3000 pic.) When I drag file to ID Photo Server 2011 it preparing file very slow.

I am having the same problem. It just started a week ago. I'm a photographer. I would take a data card full of photos and copy them to a folder on my desktop. I always make sure the file volumes match after the transfer is complete. Then after I eject the compact flash drive, I check the file volume again on the desktop folder before I reformat the flash drive.
In this case when I went back 24 hours later the folders were emissing files or totally empty. I just lost two days of event shooting and I'm going to have some really ****** off customers if I can't retrieve the files. There are roughly 700 digital photo files that are just gone. I don't even know the exact file names because I delete some images as I shoot.
Is there any way to see if these files are still on the drive and just missing their file names?

InDesign CS 5.5 very slow open file

Hi,
I've a problem with inDesign. When i shift from a file to another, it is very slow.
I 've to work with a lot of file ( 8 or 9) open concurrently.
Every file is about 200 Mb.
this not happen using inDesign CS4 (on the same MAC, before upgrading to CS 5.5)
Here my MAC configuration
Imac Intel core i5 2.5 Ghz
8 Gb RAM 1333Mhz DDR3
MAC OSx 10.7.4 updated
Indesign CS 5.5 update to 7.5.3
Anyone can explain me ????
Thanks in advance

Look in the upper left corner of your screen. I’ve seen instance where the program opens with nothing but a tiny window there.
If that doesn’t do it, then restart Windows.
Bob

Windows 7 + Office 2007 & 2010 VERY slow saving files to on 2008 R2 files shares

OK I have litterally tried everthing in every forum there is to resolve this. It is only happening on our Win 7 workstations that are running Office 2007 or 2010. Our file shares are on a 2008 R2 server. Opening and saving files on the shares using
Office is very slow. I have tried updates and server and workstations are 100% up to date. The server is only running as a file share server. Nothing else on it. We have completely set up new PC's to test with clean Win 7 installs and nothing else except Office.
Nothing else on the network is slow at all. I have tried all the hotfixes in the world that could relate to this from many hours of research into possible causes. I have done the EnableShellDataCaching fix, the SMB 2 disable fix, the windows search/indexer
fix, the pdfmaker fix, the lookup wizard add-in fix, the go to the newest firmware on the cisco switch fix, update workstation nic driver fix, the Trusted Locations in Excel fix, and about a dozen other fixes. NOTHING WORKS! This has brought our Win 7
and Office 2007/2010 users to a halt in their ability to do their jobs. Our company is suffering badly. And did I mention that our IT dept is getting a lot of heat and criticism about it. FYI we are running an IBM E5450 with dual multi-thread
multi-core(8) 3 Mhz Intel Xeon processors with 2008 R2 64-bit, 12 GB ram, and the server is using litterally no resources. Network connected is Gigabit. This has to be a Microsoft issue with 2008/Win 7/Office 2007&2010. This has become a nightmare for
out IT dept and has consumed weeks of our time when we need to be working on other projects. Can anyone solve this. Microsoft: Please release a REAL fix for this that we can run on the server or push via GPO to the workstations.

Hi,
Take a look at this and see if it helps:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
also
Office 2010 components, such as Word 2010?
At this time, I suggest trying to start Excel in safe mode. Then, open the Excel file or create a new Excel file, and save the file to the network again.
Start the Excel program in safe mode
1.       Click Start, point to All Programs, and then point to Microsoft Office.
2.        Press and hold the CTRL key, and then click the Microsoft Excel.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Excel program, we can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Excel program:
Disable add-ins
Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
Check if there are any add-ins, clear the checkbox to disable them.
Close the Office program and restart it.
Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please feel free to let me know.
====
Is the performance also slow when you trying to save the Excel file to other network path?
At this time, we can also try to test this issue in the clean boot mode.
Test in Clean boot Mode
===============
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.        Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3.       Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This should not affect the system or other programs. We may still manually run these programs later.
What’s the result now?
How to return from the Clean Boot state
After the troubleshooting, we can return from the clean boot state:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.       On the "General" tab, click "Normal Startup - load all device drivers and services".
3.       Click OK. Click Restart when you are prompted to restart your computer.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Why is InDesign CS6 so slow accessing files on NAS?

Using InDesign CS6 on Mac OSX 10.6, accessing files on an Apple Airport Time Capsule.
Here is my workflow:
- Access indd files on Time Capsule.
- Package file with links and fonts.
- Move Packages to other computer (for image processing).
- Move Packages back to Time Capsule.
Problem:
- When working on the files initially, everything is fine.
- Once packaged, everything works fine on either computer, before and after image processing.
- Once the packages are moved back to Time Capsule, there are long delays & beach balls any time you move the view, zoom in/out, etc.
Things I have already tried:
- turning off Preflight (no effect)
- changing view to fast display (no effect)
- live screen redraw is delayed.
- happens on multiple computers, all with adequate RAM
Any ideas on what this could be, or where to start troubleshooting?

If ID needs to go back to the network to load something else into memory, that's going to slow things down. I'm not a network expert, nor do I really know what gets loaded into memory (the total amount of RAM is actually irrelvant once you get to the point where ID is using the adressable limit, just under 4 gb for CS6 which is still 32-bit) or how big your file is, so I don't know how much swapping is going on. The speed of the drive in the NAS is also going to be a factor.

Safari very slow downloading files

When I bought my MacBook Pro in 2009 I used Safari for few days then I switched to Firefox, and the reason for that is that downloading any kind of files goes very slow to around 5 KB/s while downloading the same file in any other browser is so fast. Now after the release of Safari 4 I thought this problem could be solved but here again the exact same problem and I really love the new safari except that this problem is really annoying me. By the way browsing is working perfectly fine.
I have a 2 Mpbs ADSL connection.
any idea?

Preference files retain information about the default and custom settings for a particular application. Also, they store information accumulated over time not directly related to a preference setting.
In Safari's case, this retained and accumulated information comes from a variety of sources within and outside of Safari. For example, 3rd party add-ons, such as Glims, store information in the preference file pertinent to their operation and settings.
Sometimes, corruption occurs if this information is incorrectly coded in the software. In that instance, as Safari accesses the preference file, it will crash due to a flaw in the data stream. Another example - updating Safari from one version to the next might trigger corruption if the 3rd party content within the preference file is not compatible with the new version's operation.

6230i very slow + lost files

just over night my 6230i has lost files from the MMC card and lost the ring tone that i set for it, also it has become very slow in accessing the menu's, which sometimes it reverts back to the wallpaper,and sometimes it doesn't respond to the buttons i press, does it need a firmware upgrade?, it's on v3.40Message Edited by bjproc on 07-Jan-2006
12:22 PM
6300

I think the problem could be the kingstomn memory not being Dual Voltage, just by reading other posts.
6300

Very slow attaching files to Yahoo Emails and Browser Plus will not set up.

Very slow uploading attachments to my Yahoo Emails. I tried their "Attach files more easily", but "Browser Plus" hangs at "Almost done...(You don't need to do anything) " screen. I have Windows XP, Firefox 3.6.6 and only use Yahoo for emails. Yahoo are no help, could it be browser settings?
== This happened ==
Every time Firefox opened
== About a week ago.

Walter2323, Sorry to learn that you are having this issue and welcome to the HP forums,
Have try using this tool to install the printer GO HERE give it a try please let me know if you encounter any errors.
Another Step that I will take is to disable all securtiy applications before installing the printer this will ensure that one of this application is not blocking a critical process needed to properly install the printer.
Are able to print from the computer via usb and/or wireless?
Hope this helps and let me know if I can assist you any further;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

WD MyCloud very slow access

Dear sirs When I bought the MyCloud device 3TB, I had already experience with different WD MyBook devices. The problem is, that we are not able to really work successfully with new MyCloud device. Once the transfer has started it is fast. For huge files up to 45MB/s which is amazing cool. But from click to start the copy until it really start it takes some times up to 20 seconds (for one single file).In case of this extreme slow access time, we switched off ALL services. Cloud service is off, Media streaming is off, backup is off, trash-service is off, ... One extreme performance impact is for example one Security camera folder filled with10 subfolders filled with 5'000 JPG pictures each. To simple access them to make a preview it takes 3 days. On local HDD it takes about 1 minute.We have tested now on Windows XP / Windows 7 / Windows 8.1 at about 6 different computers. The main problem is our daily "office file access" which went down extrem slow since we moved to the cloud. Here are my settings and CPU load in a short videohttp://youtu.be/aR6epWKnYT8 Please advice

The IP is already static set by Router. Additional I have tried with static IP. But WD Cloud has not fixed anything that way. CPU is still enormous at load without any reason too.

Ohs - autentication to access file via virtual directories

10gas rel2
What is required to get the user to authenticate when accessing static files via a virtual directory ? are there any mod_?? suitable for this?
I've got mod pl/sql working calling a custom authentication for all dynamic content but how do I deal with static files on the server?
Your advice is much appreciated
Thanks
Pete

JMApple wrote:
Thanks for your help so far.
I followed the 'path' you outlined, taking me to the "iTunes library". When I click on the iTunes library,
that's not how it's done. I thought you simply want to copy the entire library. if you only want a few songs then do the following. quit itunes. hold option and start itunes. it will offer to choose the library. choose the one on the macbook drive that you've now located. it will open the itunes library of the macbook in itunes. select the songs you want in itunes and drag them to the desktop (or better make a folder on the desktop and drag them there). quit itunes. then option-start itunes again and now choose the itunes library in your home directory on the imac. drop the songs from the folder on the desktop onto itunes in the dock and they will be imported into the library on the imac.

Slow Accessing Files Across a Windows 2003 Server Network

I posted this quite some time ago in the Os X Forum:
Hi,
We get the spinning ball when we access files across a Windows 2003 network with our Os 10.3.9 Macs.
It seems that the more files there are in the folder, the longer you see the ball, our Fonts folder can sometimes take up to 2 minutes before you can scroll to the bottom of the folder.
This happens after a computer restart or a program restart.
Does anyone know of a fix for this issue, as it is quite annoying?
Also note: This does not happen when accessing the same files through Os9 classic, even though the machines are running 10.3.9.
The network is all new cat 5 cables and this a relatively new Dell Power Connect 3324 switch connected to a very fast Dell Poweredge 2600 server.
Thanks in advance,
David

I'm also running several Macs on a Windows Small Business Server (Windows Server 2003) and the only way I am able to pull up the files was to join each one of my Macs to the Windows Server's network domain. You have to do this through the Directory Utility in the Utilities folder. There is one draw back from what I can tell, and it's something that I need some help with. It seems that once a Mac (running Leopard) is joined to a Windows domain, it takes the log in process forever to finish. Logging into a Leopard Mac alone is pretty quick, but after joining the domain, logging into any of the Macs on the Windows domain takes over a minute. If anyone knows the answer to this one, I'm all ears.

IMac is very slow after switching to OSX Mavericks

I'm still getting used to the philosophy of this site, so excuse me if I stray. I had posted in a different thread and was asked to start a new thread.
I have a 20-inch, Early 2008 iMac and I've been upgraded to 10.9.4 for a few weeks. I did have the fan problem, but sorted that out, forget what I did but may be able to retrace my steps.
But, the machine is so slow now - really not tolerable. Every program I launch just takes a lot of time. Even launching Textedit that used to just flash up is sow. Safari is now very slow to launch. Google, which I use all the time and was normally slow, is now excruciating. Logging on, I have to wait a long time to even put in the PW. Once open, most applications are tolerable. But, like others have mentioned, the machine is just slower at everything. I watch "Activity Monitor" to see what's using what for memory and CPU, and nothing new with that compared to 10.6.8 except it's not as good giving me the information I want in an quickly readable form.
Do I need to just go back to 10.6.8, or is this Mac's hardware is not compatible with 10.9.4? It seemed that the upgrade was recommended for this machine.
I'd appreciate any thoughts, recommendation, suggestions. Thanks!
PS: I was asked to send top 5 CPU and then the average User CPU....
Firefox                    6.7%
Activity Monitor     1.0 %
Window Server     0.8%
Firefox Plugin         1.1%
kernel_task          0.4%
User:                    4 - 11%
As you know, these constantly change, but I just jotted things down in the list above. Nothing was taking any serious time. Firefox will momentarily go up to 30%. I know when Time Machine is slowing things down because I can see it backing up with the icon on the menu bar, but that's not only when it's slow. It's just always slow starting applications or opening new windows in Firefox, opening a new window in Word or Excel. I always have Activity Monitor open to watch for anything unusual, like if Firefox is bogging me down.
The question is should I expect this OS to be bogging this machine down, in general? Thanks!

It would be nice to know how much RAM is installed. A report of this would help:
You should use Activity Monitor to check for:
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
Download and install EtreCheck 1.9.12. Run on your system and copy and post results here.

Ix2-200 VERY slow accessing files via osx 10.10

Similar Messages

Maybe you are looking for