Ix4-3004 Date & Time Error

The time cannot be syncronised to the configured time server.
When I press Date & Time a page for Axis Communications open & says AVHS Disable click to enable,
Any solution please ??
Awaiting your reply,
Thanks in Advance

Hello DGcomsys
In regards to the firmware issue you are experiencing, please contact Europe support. Further troubleshooting will need to be done to find a resolution. 
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

  • Date & Time Error on Restart

    When I restart my macbook pro, I get a date and time error message and it sets my clock back to December 31, 2000.  It then doesn't remember my wi-fi settitngs and I have to manually correct the date and time.  Any suggestions on how to not receive this error message at each restart and startup?

    Reset the NVRAM.
    About NVRAM and PRAM

  • Invalid date/time error

    Hello everybody,
    I have a problem when doing a request to an OData Service and trying to show the results in a sap.m.Table.
    Sometimes I can get nullable results coming from this OData service, like:
    <d:ValueDate m:type="Edm.DateTime">0000-00-00T00:00:00.0000000</d:ValueDate>
    When this happens, I always get the error
    2014-04-10 14:44:16 The following problem occurred: Invalid date/time value200,OK,{"d":{"results":[{"__metadata": ...
    The definition of the EntityType is as follows:
    <Property Name="ValueDate" Type="Edm.DateTime"/>
    The property is defined like this, so I believe saying that can handle nullable values.
    I am clueless of what could be the problem for that.
    The error occurs in datajs.js, when executing the method invokeRequest.
    Does anybody know what could be the problem?
    Is this correct that I define a date as Edm.DateTime? Or should I use String instead?
    Thanks,
    Rafael

    Rafael,
    Yes, Date has to be Edm.DateTime.
    I am not sure if I understood your question though. You already get the result from oData service with all zeroes. So oData service delivers data without any problem. When do you face the problem?
    Thanks
    Krishna

  • Cannot Sync Date/Time Errors

    Trying to sync with Exchange email.  It worked fine until a few months ago.  I checked with ISP and they said all my settings are correct.  They said nothing has changed on their end and all the port settings and server are correct. 
    I have not made any changes to the OS within the time it worked and stopped working. 
    Error Message:
    There was a problem syncing messages. Problem verifying the SSL certificate. Please ensure device date and time are accurate.
    Error Details:
    AirSAMStateMachine.c 453 14724
    I checked the date/time on the palm and seems to be about 3-4 minutes fast.  I'm assuming this is the problem.  If I back the date and time up it ends up going back because it's syncing time with a server.  Using US Eastern Cleveland or Washington DC gets the same results. 
    I can POP with gmail fine, but the exchange account is what's getting the error. 
    Any suggestions?

    Thank you. I will follow up with Marriott's ATT rep. to get their input.

  • RT set date/time error

    Hi all,
    I have noticed that whe I use the "RT set date/time" vi to set the time on my cFP-2010 the result is 12 hours out. i.e. If it is 2:00PM, I write 14:00 to the vi, and when I read it back, it reads 2:00 AM.
    Can anyone please suggest why this is occurring, and a solution?
    Thanks
    David

    What time zone are you in and how are you reading back out the time?  I believe FieldPoint
    keeps GMT and if you read its time directly, i.e. view an indicator running on the controller,
    it will display GMT.  If you bring the timestamp back to the pc and display it there it should
    be tz adjusted according to the settings on the pc.
    Matt

  • Date & Time error 0271 with T-22

    I've had no problems with my T-22 which was upgraded to Windows XP and additional RAM was added about a year ago. It's been running fine and had no problems until about a week ago. When I went to turn it on I got an error 0271 "check date and time settings".  Since then I cannot get my computer to boot up. It will get to the point where it requires my password and when I type it in it says OK but won't go any further. I have tried everything but it won't let me into the BIOS setup utility to correct the date and time. I've downloaded diskettes and cds from the IBM website on my other computer and tried to boot up my T-22  (of course I didn't have the foresight to make a boot disk or cd) and tried the commercial softwarre such as Professional Mechanic, etc. but nothing works.  Does anyone have any ideas?

    Just removing the battery will do nothing to reset the systemboard remove the laptop battery and also the CMOS battery than with no power cord installed hold the power button for 30 seconds do this 3 times and the system is reset. EZ-Serv will tell you the same thing but for time and data error I stand by replacing the cmos

  • Date & Time Error

    Uhmm does anyone know how to disable time change when I connect my iPod Touch to iTunes? i mean everytime i connect to iTunes my iPod always changes its time like its giving me an 8 hour gap. My time in my pc is correct even my time zone.. so.. any advice? thanks.

    lol you'd be surprised how many people have it set for a country they've never been never mind lived it. ;D
    It could be something to do with the clock error on the iOS4 try and update to the 4.2 and see what happens then.

  • Date / Time Error on SPA3102 after upgrade to SW version: 5.1.7(GW)

    After upgrading the software of my SPA's date and time is stuck on:
     Current Time: 1/1/2003 12:10:11and can therfore not register. I tried changing to several NTP ie: time.nist.gov or ntp.sipgate.net but nothing gives.
    Anu suggestions how to solve this problem?
    Solved!
    Go to Solution.

    make sure that the device is on the internet or that it is getting DNS server addresses.
    also you can try to point it to a local computer IP address to use its time.

  • SRW2008 Date/Time error

    Everytime I reset my siwtch, the date and time change to: 17:00:00 Dec 31, 2099
    The firmware is 1.0.4
    I've tried using SNTP and system time, but neither seems to work. Whenever the switch loses power the time has to be reset!
    Solved!
    Go to Solution.

    I believe this should not happen. Try re-flashing the firmware of the switch and see if you still have the same problem. You can download the firmware on this link: 
    http://www.cisco.com/en/US/products/ps9971/index.html 
    Other than this, I suggest contacting CISCO tech support to further look into your problem. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support:  
    http://www.cisco.com/web/products/linksys/index.html

  • Email date/time error since .668 upgrade

    Is anyone else suffering the problem of their received email showing the time it was received as GMT/zulu time since the update to .668? The problem started for me 2 August, right afer updating to .668. Interestingly emailn sent from Google accounts display the correct timezone (PDT).

    make sure that the device is on the internet or that it is getting DNS server addresses.
    also you can try to point it to a local computer IP address to use its time.

  • "no data found" run-time error masking SQL/report mismatch

    Hi all,
    At last, figured out a vexing problem and wondering if anyone else either:
    a) has also hit the problem, and hopefully
    b) has figured out a clever way around it.
    Namely, in our AppEx apps, we rely on SQL query generation from PL/SQL packaged functions. This "best practice" promotes reuse, automated testing, etc. Great idea - works great.
    However, we've repeatedly come across a situation where we go to run a page with a report on it only to get a "report error: ORA-01403: no data found" message where the report should be. Not much to go on. After trial and error, it turns out that simply going to the Region Definition page (where the PL/SQL function call is defined) and clicking the "Apply Changes" button cleared the problem up.
    Mystifying because the actual SQL query generated by the PL/SQL is valid (we've got a nightly testing job that pulls the PL/SQL function calls out of the AppEx metadata tables, executes them to get back the SQL and then validates the SQL).
    Turns out this problem looks to be a result of columns changing in the actual SQL itself, and hence not matching up to the Region Attributes (column names, one assumes) that AppEx knows about. Simply clicking Apply Changes causes AppEx to validate the returned query and then it adjusts the column attributes (one assumes) so that things match up.
    So - the $64,000 question(s):
    1) Are there any cool AppEx APIs to be able to try and detect this situation? Given an app of middling complexity (50-100 pages, each with various queries/reports), this is not an attractive issue to deal with manually.
    2) Any cool AppEx APIs to fix, or auto-sync these situations? (Essentially programmatically calling the "Apply Changes" button if you will).
    At a minimum, it would be great if AppEx could be updated to put out some kind of more informative error message when this occurs - maybe something along the lines of "Region Attributes Do Not Match Data Returned from Query", or something like that at least.
    Thanks for any input/ideas,
    Jim C.

    Thanks to all for your prompt responses.
    Vikas actually did me the favor of pretty much clarifying my info for me (tks Vikas). Yes, to all the above. It's PL/SQL code generating a SQL query, so 1 is (a); we want to use query-specific columns so it is (2a). And yes, the whole problem is that the something does change to cause the SELECT statement column list to change...nature of the beast, so "don't do that" doesn't really help here.
    Scott - sorry, should have been more explicit. Basically, we have a PL/SQL function behind a report that returns a SQL statement for the report. If that PL/SQL code changes to add a new column to the report (without going to the corresponding Report Attributes page and clicking the "Apply Changes" button to get AppEx to revalidate the query), then you wind up with this "no data found" error msg, which doesn't exactly point you to the root of the problem.
    It seems as though the "parse at compile-time" is really what's going on here. There must be some kind of "run-time" check going on as well, that is resulting in the "no data found" message. Seems as though it ought to be fairly straightforward to add some kind of check at run-time to handle that exception a little cleaner. Is there an official process to register a "Request for Process Enhancement" for AppEx to do this?
    In the meantime, thank you Vikas for the pointer to the APEX_APPLICATION_PAGE_RPT_COLS view - that looks like it will do the trick nicely. Given that, we can now add logic to our nightly "app tester" job that can compare what columns AppEx expects to find in a given report (for a given page) with the actual SQL (coming back from the PL/SQL function call) to essentially "validate" the AppEx meta data and at least let us know when these things get out of sync.
    BTW - if anyone would be interested in the actual contents of that "app tester" logic, I'd be happy to post it (someplace...here? Studio site?). It's basically just a PL/SQL block of code that currently runs in cron that just validates any SQL embedded in our app. (I suppose it is a little "hard-coded" since it does use our naming conventions for packages/functions to parse the PL/SQL calls from the Meta Data but it might still serve as a usefull starting point...) Since our AppEx app(s) sit on top of a database schema that is in fairly constant flux, we need the ability to know when somebody has changed something in the schema that needs to be accounted for in AppEx. The job primarily just parses the AppEx meta data to find PL/SQL function calls that return SQL, executes that PL/SQL to get the generated SQL, then just validates that SQL and reports back any invalid SQL calls. Perhaps we're in some unusual development environment (15-20 people working on a database schema with 700-800 tables/views) but it seems as though it would be fairly easy, for anybody using PL/SQL to generate SQL (which is a GREAT and powerful thing, by the way - thanks to whoever thought that up in AppEx land) to run into this issue.
    Jim C.

  • TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networ

    My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networkl.

    Can't connect to the iTunes Store
    Make sure that time zone is correct in addition to date and time

  • Run Time Error  while Transferring data to Application server

    Hello Abaper's,
    I have generated a XML data using the FM : "  SAP_CONVERT_TO_XML_FORMAT ".
    While transferring the data to a File on Application Server using the statement
    DATA : wa_xmltab TYPE truxs_xml_line,
                 it_xmltab TYPE truxs_xml_table.
    OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc EQ 0.
      LOOP AT it_xmltab INTO wa_xmltab.
        TRANSFER wa_xmltab TO FNAME.    <<<<<<<<<<<<<<  Getting Error here
      ENDLOOP.
    ELSE.
      MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
    ENDIF.
    CLOSE DATASET FNAME.
    The Run Time Error i am Facing is  
    Short text
        The current statement is only defined for character-type data objects.
    Error analysis
        For the statement
           "TRANSFER f TO ..."
        only character-type data objects are supported at the argument position
        "f".
        In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
        current program is a Unicode program. In the Unicode context, the type
        'X' or structures containing not only character-type components are
        regarded as non-character-type.
    Regards
    jv

    Hello  Volker Binder ,
    Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
    Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
    but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
    Actual  No. of Records  in Internal table :
    matnr            matkl          meins
    0-BUY1               012         PC
    0-BUY2               012         PC
    1                                EA
    2                    012         L
    3                    01          EA
    12                               EA
    23                   001         ST
    24                   015`        EA
    28                   010         EA
    29                   015`        AU
    XML Format for the above 10 fields is :
    <?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
    </MEINS>
    </TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
    PC </MEINS>
    </TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
    </TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
    This 4th record data in XML is also incomplete..
    The above XML format is generated only for 4 records  out of 10 Records.
    Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
    Regards
    Jv

  • Error in displaying date time value in Thai Windows OS browser.

    Hi,
    I have a problem displaying date time in the browser which is installed with Thai Windows OS. The time portion (the subset of datetime) does seemed to show correctly. Initially i am suspecting the virtual machine problem but i tried on bith java and microsoft vm, the result seemed the same. I tried to look in the source of the page and the character is just the same as the incorrect character displayed in the browser. The html source is -->
    <tr class="TableData">
         <td width="76">14/01/04 12:17:06 H-@5H"</td>
    the time is displaying incorrectly. I am not sure its due to any setting in the BEA weblogic server. FYI i am now using WLS6.1(SP2) version. Hope and appreaciate a prompt reply. Thanks a zillion in advance.
    Regards,
    Sunny

    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=noclassdeffounderrorIWDAbstractTableColumn&adv=false&sortby=cm_rnd_rankvalue
    java.lang.NoClassDefFoundError
    Error while binding node attribute to a  UI  element (table)
    Problem with NWDS 7
    class def error?

  • Error when converting time stamp in date time time zone CST  in IC

    Hi Experts,
    We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
    so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
    we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
    So please advice how to resolve this issue.
    Regards,
    Teja

    Hi Teja,
    I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
    Regards,
    Simon.

Maybe you are looking for