Ix4-300D Issues on Sleep and Fan Speed - Possible Feature Request

Hi,
Can I find out why when the drives go to sleep, why cant the display panel turn off and the fan slow down?
My NAS is only used at a certain time of day, which I can use the power off/power on schedule, but there are times during the week when I want to access it. So, I can use the power switch to turn it on but then it stays on until the next scheduled off time. Cant Wake-On_Lan be programmed to wake up the unit in the Power Off state (If it should, then mine is not working).
It would be good to have a sleep mode like a "normal PC" where sleep is where everything is turnd off on the Nas except the ability to Wake On Lan.
Failing that, at least an option to turn off the display an leave it off. I dont need to see the front panel and the information it displays.
Also, my fan runs at a constant 1660 RPM and never varies, even when the drives are ON or OFF. It is pumping out cold air, so the unit is not warm and is obviously noisy for no reason at all. I have migrated from and ix2 and the fan ran average 800rpm, even when the drives were heavily utilised.
Why is the fan running so fast when not needed to? Is this another bug in the firmware?
I am running the latest firmware.
Thanks.

Thanks for the reply.
Yes, the drives enter sleep mode, but to me, the display should turn off, or there should be a way of turning the display off. I dont need the display on 99.9% of the time. Also, the fan is a 92mm fan with ample cooling power even when the drives are constantly being hit hard, so I dont see why it needs to run at ~1600 rpm when the drives are asleep. Even when the drives are hit hard, it still runs ~1600, never vaires. The system it self is cold (Cpu heatsink, etc) so that led to the question on whether it was actually working 100% (as in varying speed) or is it just fixed at a noisy 1600 rpm for no need.
I worked out on using the magic packet to wake the unit up from OFF mode, which is fine (but annoying as it means some command/software has to initate the wake up)
However, the system should re-shut itself down, if it is still in the Power OFF/ON Time schedule and no activity has occurred. Now, that would be a great feature.
These are very simple additions/features to put into the firmware. Other makes have/do it. They all run some form of Linux. Hopefully, someone listens and the features get added.
Thanks, Rob

Similar Messages

T430 Thermal Limit and Fan speed

Hello, I have a T430 with the i7-3520 and NVS 5400 1GB.
I'm a little concerned with the high temperatures my system shows. At idle and most of the time the temperature on the cpu is reported in the low/mid 40C range. (fan is very quiet or nearly silent)
However, I tried playing Age of Empires 3 to see how the laptop does. Performance was great, fan speed kicked up a little but I thought it was still VERY quiet (all my other laptops have much louder fans when they kick in). Initially I thought that was great, until after an extended play (1hr or so) I seem to have hit a thermal barrier of some sort. Frame rates droped massively, everything was choppy. Uppon exiting the game, I loaded HwMonitor and the cpu temp was reported to be 75C, nvidia temp 68C.
I read some other threads here, and I saw HIRO mention speedfan, so I installed that, but what puzzles me is neither software detect any fans, All I see is thermal sensors.
I did replace the HDD that came with the laptop with a Samsung 830 SSD. I used the Recovery disks to install the new O/S, so all drivers came through just fine.
Anyways, I like the fans being quiet, but once I'm over 50C or 55C I'd like this thing to start moving some serious dust. Is there a way to control their profile? The only option I saw was both in Bios and in Power Manager under "System Settings" there's an option "Optimize fan control to" and I have it set to Maximum Performance.
Thanks in advance,
-Phil

Hey PhilZJ,
Hey so Other people have an issue with speedfan not showing the fans and just temps you can use TPFancontrol if you want. On my T430 TPFancontrol shows temp of 53c and fan speed during start up but without pushing my temp past 55c the fan never kicks in or so TPF says being at RPMS stay at 0. Could I suggest you download TPFcontrol and run your game? See what temp and the RPMS your fan kicks up to? I would but playing games at work is frowned upon.
Best Regards,
Hiro
P.S. So if you set TPFancontrol to manual at setting 1 you get RPMS of 3434 RPMS, at 7 you get 5000+ RPMS.
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

Heat/overheat and fan speed: worry?

Hi
My imac is 27 inch mid 2011
after i use my imac for 30 min, the machine is getting really hot on top. It happens fast if i play game like Leauge og legends in windows bootcamp, but it also gets really warm when i just surf on safari/internet. So no matter what i do, as long as i use imac, it gets really warm. Can anyone tell me why it gets hot? and sometimes fan make really loud noise, like imac is going to explode or melt itself. But my imac have never shutted down caz overheat.
Here's info of my imac:
27 inch, mid of 2011
Processor: 3,1 GHz Intercore i5
Memory: 8 GB 1333 MHz DDR3
Graphic: AMD Radeon HD 6970M 2048 MB
Mac OS X Lion 10.7.5 (11G63)
And here's my result of istatspro:
CPU:
User 1%
System 1%
Nice 0%
Idle 98%
Memory:
Wired 793 MB
Active 0.98 GB
Inactive 129 MB
Free 6.12 GB
Disks
Macintosh HD
U: 58.18
F: 204.2 GB
Bootcamp:
U: 105.8 GB
F: 38.85 GB
Network:
In: 0 Kb/S
Out 0Kb/S
Temps: (This varies a bit from recently warm to after awhile - warm) Temps in celcius
HD Macintosh: 60 C
CPU 57 C
Ambient 40 C
GPU Diode 65-67 C
GPU Heatsink 59-61 C
Mem Controller 58 C
Optical drive: 53 C
Power supply 2 69 C
Fans:
Optical drive 2340 rpm (recently warm) and after a while : 1441 rpm
Hard Drive: 2400 rpm
CPU Fan: 3797 rpm recently warm… After a while: 4198 rpm
Whats the normal temperature and fan speed?
And whats the reason to this heat issue?
How can i solve this?

My imac is on the table in the livingroom. So its not very hot in this room. Only reason of heat is the summer… but this heat problem has been since before winter…
do u have any tips or suggestion what i should do to solve this?
I dont want my imac to burn or melt inside

Temperature and Fan speed? screen freeze

I Have 2011 MacBook Pro 13inch . I was having the screen freeze issue from a hot graphics card it cpu that so many others have with this year macbook. After a night of playing videos (not realizing it was in loop) connected to my hd tv using thunderbolt. After the first one it happened a few more time after playing any video for a few minutes. Screen freeze with little pixelated boxes, yellow or blue. After some research I reset SMC and seems sit of fixed it. I am not running SMC FAN AND Temperature Monitor apps and my fans run about 2000 all the time. When I get hit it speeds up but not to much, seems on point. Except when I play hd videos the system get gets to 75-80c . I still have not had the freeze but that's because I have temperature monitor to launch SMC fan set at max fan speed when it get a to 80 d
Degrees C. I'm wondering if anyone knows the safe temp the 2011 MacBook Pro should be running at When playing hd video. I know it gets hotter when playing hd video by without SMC it seems my fans don't kick on to max speed untill the MacBook reached about 85-90c. Once the fans max it cools it right away. I know the fans are working cause I hear them but should the fans kick on faster before it gets to that hot if a temp. And is it safe to play hd movies of its running at about 80-85c?
Thank you for any information you might have on safe and average temp and fan speeds. If anyone has a macbook pro please let me know when your playing hd video for about a half hour or more how hot your cpu is showing.

Macs have established a reputation for being inferior game machines. PC's dominate that area and if that is a high priority, I always recommend a PC.
Pauletronic wrote:
I'm happy to know that 85-90 is normal for video but my maCOBOL did almost fry my logic board from over Heating.
I doubt that you almost' fried' the logic board, but you may have approached thermal shutdown.
I also have a 2011 MBP and have run applications that are CPU/GPU intensive with no issues (the MBP certainly does heat up and gets very warm). I have never felt the need for a third party fan control.
If you wish to run games a lot, a cooling pad and a cool environment would help the situation.
Ciao.

Satellite P750-10R idle temp and fan speed

I have just received a P750-10R and I am wondering if the idle temp and fan speed is normal. I do not have it on eco mode and the processor is at around 50 on core 1 and 47on core 2. According to the Health Monitor the fan runs at 71% speed which is rather loud in my opinion.
The ambient temp here is not very high, maybe 21-23 celcius.
Does anyone have a similar model that behaves the same way?
Regards,
Danel

Small update on the issue.
Switching to eco mode will shut off the fan for a short time. Switching back from eco mode puts the fan immediately at approx. 67% speed, no matter what is running at the time. Fan doesn't seem to run at any speed under 67% but can go higher.
Could it possibly be the recent bios update? I didn't run the computer for very long on the bios it shipped with, so I haven't got a comparison base between the two versions.
Regards,
Danel

Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?

My desktop computer m9200T running Win7 Home Premium crashes often. It seems to be temperature related.
I had tried SpeedFan, but my computer crashed everytime I ran it. SpeedFan window scrolled 20 some lines of text than the computer crashed. Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?
This question was solved.
View Solution.

Hi,
Only have one temperature monitoring application running or you could end up with erroneous readings.
Try PC Wizzard. Depending on your hardware, you should see temperatures for CPU, GPU and disk. At the same site you can also try HW Monitor.
I am running a custom motherboard and it comes with its own software for this purpose. HW Monitor seems fairly complete.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

First Backup on Time Machine - CPU temperature and fan speed

I attached my external WD drive and started Time Machine. Works just fine however I watched the cpu and temp and fan speed as reported by iStat.
During the hour long "first backup" I reached an incredible 160 degrees cpu temp and 6000 rpm fan speed. Cpu was 70 percent or so. When this temp was reached it looked like some limiter took over to reduce cpu consumption and temp. CPU dropped to 30 percent and the temp came down. Fan rpms reduced as temp did.
I don't know if iStat reports the feeds on a MacBook Air properly or not but if so......interesting.

160F is not very high - 160C would be a different matter.
Under sustained 100% load, my Macbook CPU is at about 190F, with the fan at about 6200 rpm, in a room at about 68F.

Sun PCi II and Chip Temperature and Fan Speed

Dear All,
I have just installed a Sun PCi II card and am running it under Solaris 10 all seems to be working fine.
Looking at the environmental stuff in the BIOS revealed that the CPU Temperature is 94*C and the CPU Fan Speed is 0 RPM. Should I be worried ?
Do you think the fan has failed or is it just a bogus report. I would have thought if the chip got that hot the system would shutdown.
Thanks in advance,
Hugh

Dear All,
> I have just installed a Sun PCi II card and am
running it under Solaris 10 all seems to be working
fine.
>
> Looking at the environmental stuff in the BIOS
revealed that the CPU Temperature is 94*C and the CPU
Fan Speed is 0 RPM. Should I be worried ?
>
> Do you think the fan has failed or is it just a bogus
report. I would have thought if the chip got that
hot the system would shutdown.
>
> Thanks in advance,
> Hugh
Getting exactly the same CPU temperature and fan speed in a SunPCI II just installed in a Sun Blade 2000. Also noticed that the BIOS PC Health Status Page reports a Shutdown Temperature of 60 *C, i.e. the reported CPU Temperature is above the Shutdown Temperature but the system is still runing...
Not sure if the "micro cooler" device fitted over the CPU has a fan, or uses some other cooling technique.

Satellite C855 - Average CPU temperature and fan speed

Hello!
I've had this toshiba Satellite C855 since march this year. it's only recently that the CPU temp and Fan speeds have been worrying me.
When I'm not playing games or doing a livestream my CPU temp stays around 35-40% with the fanspeed at steady 50% or not on at all due to it been cool.
When I do play games however the fanspeed is going up to around 66-68% with the CPU been around 55-60%
I was wondering if this is normal? or do I need to clean it out by taking it apart. if it is the second option then I am worried since I do not want to damage anything inside. plus I am not that great with the inner workings of a computer.
Any help or information would be very appreciated thanks.

In my opinion there is no reason for panic. T is logic that under stress CPU activity is higher and CPU produces more heat. Notebook must be cooled down properly so sensors that control cooling fans register growing temperature and cooling fans will run on higher speed.
There is no reason for cleaning. And one day if that must be done please dont do it alone. You are not authorized for doing this.

Ultra 40 M2 core temperature and fan speed

Hi,
I'm using a Sun Ultra 40 M2 with two dual core AMD opterons 2218 running openSUSE 10.3. I have been trying to use lmsensors to monitor core temperature and fan speeds. It seems to be working and I have been able to use gkrellm as well.
At low load I get temperatures around 40C on all cores (as measured by k8temp-hwmon), and fan speeds of about 1500 (rpm?; as indicated by lm85-hwmon2/fan1 and lm85hwmon2/fan2; only two fans?). However, at full load all core temperatures go up to 70-75C (steady) and fan speeds increase up to 2500 (which does not seem to be the maximum speed of the fans, as they are much noisier at booting stages). I wonder if such an increase in temperature is normal and how can I setup the fans' speed, if at all possible.
Thanks,
Marcos.

I'm currently running dual 2222se chips, an fx3500, and a single samsung 15000 146gb with an idle temp of 40-42c. But, I've run into a problem. For some reason, when my system boots, the fans run through the BIOS checks, but after post, the fans stop entirely. I've gone into the BIOS and fiddled with a few of the settings, but haven't been able to rectify the problem. Is there a specific setting that I may need to change to get the fans to actually run after post?
I got this workstation used, so I was unable to get the tech support information I was looking for without paying an additional fee. So any help whatsoever would be MUCH appreciated.
ChinGimLeong, as far as your idle temp goes, that sounds about right for the setup that you're running. You may want to look into purchasing some thermal grease and cleaning your chips and totally reapplying the grease. Improper application can hinder the heat transfer, causing a bit of a high idle speed. But if you apply too much, you WILL fry your board and processors. Another thing that you may want to try would be adding an external ventilation source to help get a bit of faster airflow. I use an 8 inch desk fan, it adds a bit of extra noise, but noise is nothing when you're protecting your system.
Let me know what you think.

Normal woring temperature and fan speed?

Hi,
I have installed vista x64 bit on macbook pro and have some questinos.
FIrst, can someone help mi to find keyboard shortcuts for turning on/off wireless network and bluetooth... if is this possible.
Second, I have installed "input remaper" that allow me to reconfigure some keyboard shortcuts, and it automatic control fans and monitor CPU tempereature. It is between 60-70c and fan speed is set on 2000 rpm minimum... Is it this ok, mean this temperature because machine is sometimes really hot....
Regards,
BA

I too have been wondering the same things. My temps are very high as well 68-69C for the GPU and 65-67C for the CPU cores when under Vista. I do not believe that Vista has any method to control the fans at all for the new unibody macbook and macbook pro models, at least that is the conclusion that I have been coming to myself. I have tried speedfan, riva tuner, coretemp, input remaper, and ati tool, all to no avail. Nothing knows how to properly access and control the fans for the laptop under Vista, and on top of that, the 9600 GPU is the one in use when under Vista, which means even more heat at idle. This really needs to get fixed with an update of bootcamp or a full driver release for vista.

Optimum Temperature and Fan speed

What's the normal range of temp and fan speed for MacBook Air? At what temp should i worry about it?

Mine (13" i5) reaches 95C whilst watching hulu and browsing the web. Seems a tad high to me for what I am doing.
Hopefully you will get some more good answers.

NOrmal Temperature and Fan Speed of MacBook Pro 13

Hi,what`s the Normal Temperature and Fan speed of MBP 13 during idle and when browsing or something?...please help..

The notional idle speed for the fan is 2000 rpm. If you turn it on you'll get about that and a temp of about 36 degrees in a cool room if you don't do anything. Opening a browser over wireless and say streaming a TV programme from the BBC will push the fan up to over 3000 rpm and the temp up to 60 degrees or so. Fan will drop to about 2400 rpm and temp to 53 degrees with gentle browsing.
Or that's what I get with a 2.53GHz 4GB memory machine. I took the 250GB disk out as it was noisy and put in a 120GB one that came from a Mac Mini so that may use a bit less power. (And the 2GHz Mac Mini has a rock solid 1500 rpm fan and rarely gets hotter than about 65 degrees - this has similar components to the Macbook Pro and so shows what a slightly bigger air access can do I guess).
The fan is rather faster and more noticeable than I was expecting with the Macbook, but the most noise came from the Toshiba disk which has now been banished to an external enclosure.

Temperature and Fan Speed Terminal HELP

So, I've been browsing the interwebs looking for a solution to my problem of monitoring temperature and fan speed within the OSX Terminal, while I do have a functioning way of determining them, it does require third party software that I personally would like a different way. Does anyone know of a command that I'm able to locate either of them? I know ioreg previously was able to locate these, but currently I can no longer grep my way through to locate any mention of them. If anyone has any ideas, please let me know!

You might consider the Ruby gem iStats. Ruby was updated in 10.9.3 to v2.0.0p451, and iStats does work with this version. This information is newer than on his github site.

Temperature and Fan Speed for 13inch i5

What is the normal temperature and fan speed of the early 2011 13inch MBP while using for a normal use (surfing the net, play music via itunes, movie via quicktime etc?
What is the highest/hottest temperature and fan speed of this MBP while using heavy load like photoshop CS5, playing games etc?
Thanks in advance!

Mine (13" i5) reaches 95C whilst watching hulu and browsing the web. Seems a tad high to me for what I am doing.
Hopefully you will get some more good answers.

Ix4-300D Issues on Sleep and Fan Speed - Possible Feature Request

Similar Messages

Maybe you are looking for