IX4-300d rsync server don't work
Lenovo IX4 is not workin as rsync server. From other linux i want to synchronizes files, but there are no way to do this.
With Iomega IX2 works perfectly but with this model, in theory better, no works.
nova:~ # rsync -az -vv /etc rsync://192.168.253.145/Backups/
opening tcp connection to 192.168.253.145 port 873
opening connection using --server -vvlogDtprz . Backups/
@ERROR: Unknown module 'Backups'
rsync error: error starting client-server protocol (code 5) at main.c(1183)
nova:~ # nmap -p 873 192.168.253.145
Starting Nmap 5.21 ( http://nmap.org ) at 2013-12-12 10:08 ART
Nmap scan report for rsyncserver (192.168.253.145)
Host is up (0.00032s latency).
PORT STATE SERVICE
873/tcp open rsync
MAC Address: 000:B8:24:F6:51 (Iomega)
Nmap done: 1 IP address (1 host up) scanned in 0.19 seconds
Hi sergioszy,
Are you running rsync on a secured folder? Rsync will not work if the folder is secured. Also make sure you use the IP address of the Linux machine. You can look at the support page below for more information.
How to configure a Linux Host Backup using CIFS or Rsync
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page
Similar Messages
-
PX4-300d media server don't work
My media devises can't see all the media files, only a few. When i force a mediascan, it's some other of my files they can see. It worked when i got the PX4-300d and i have not changed any settings, only upgraded the firmware everytime a new was avalibel. All files is shown when i browse from a laptop with Windows.
What to do to get it working again?
BR Johnny.Floppy3,
You would need to contact support for an imager:
https://lenovo-na-en.custhelp.com/app/ask/
-or-
Sometimes you can find them places like Nas Central:
http://www.nas-central.org/wiki/Main_Page
Are there any obvious differences between the files that it can and can't see?
Size, files extensions, naming conventions, etc? -
Vino server don't work: gnutls
Hello,
my remote control of gnome don't work. The problem is that vino server don't found the library libgnutls:
$ /opt/gnome/libexec/vino-server
/opt/gnome/libexec/vino-server: error while loading shared libraries: libgnutls.so.12: cannot open shared object file: No such file or directory
I have upgraded with pacman -Syu, but then problem don't fix.
Any ideas?. Regards.I've a problem with bugtracker:
Access forbidden!
You don't have permission to access the requested directory. There is either no index document or the directory is read-protected.
If you think this is a server error, please contact the webmaster.
Error 403
bugs.archlinux.org
Fri Jul 7 15:28:52 2006
Apache
Is there any problem with web server?.
How can I rebuild the package?, with makepkg?, where is the PKGBUILD for this package?.
Regards. -
IX4-300D - Drive Status "ToolTip" Not Working
Hello,
According to the manual, when I hover my mouse over a drive in the image in Drive Management, the ToolTip should display the drive model, size, and status, including if the drive is failing. However, mine does not display a ToolTip? Is something wrong?
Everything else seems to be working...
Thanks,
Mike
Solved!
Go to Solution.Hi maclark7029,
Did the drives come with the device or did you install your own drives? It may not recognize the drives.
What is the firmware version of your ix4-300d? It could be something with the firmware version.
The box might not pop up right away or the first time you hover the mouse over a drive. You might have to hover longer or move the mouse away and hover over the drives again.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page -
operation system:AIX 5.3
IBM computer
Application server 10.1.2.0.2
When user call report from form by RUN_REPORT_OBJECT procedure,most time work done,Today suddenly cann't run report,raise error
REP-300: OCI_INVALID_HANDLE. ==> SELECT ,then raise error REP-501 Unable to connect to the specified database,but form is ok,only call report from form is not running;
I restart report server, then report can work.I don't find the reason of report's error.
Why the report's server don't work?
How can I deal with the matter?
Thanks in advance!
lindhello,have your problem solved?
i meet the same problem with u!
report server cann't work nonscheduled,everytime i killed the report engine,then everything became OK,but i don't know the cause!!
thank u! -
Rsync Copy Job Failure ix4-300d
I'm trying to run Copy Jobs between two new ix4-300d devices Firmware 4.0.6 I prefer to use SSL and rsync. So far I can't get it to work.
I can access the remote ix4, browse directories and upload files. When I set up a Copy Job from my local system (a) I'm not offered rsync as a protocol option in the "From" box, but I can select the directory to copy from using Windows File Sharing. In the "To" box, I select rsync and input username and password and can browse the remote ix4 shares to select the directory I want to copy to. However, when I run the Copy Job, I get the message "Access denied to the secure rsync service at <IP Address>"
I have tried disabling rsync and using only Windows File Sharing, but that configuration will not let me into the remote ix4. I have also tried disabling SSL being required on external connections and that does not work either. My sense is that rsync is actually working, but I have something set wrong.
Suggestions?
Solved!
Go to Solution.Got it solved. I need to add the remote ix4 as a trusted device to my local ix4. Eventually figured out how to do that. Copy Jobs run fine now with rsync.
We could use better documentation. -
TV don't work with OSX Server software?
Everything worked great BEFORE I updated our MacMini Intel to OSX Server software, now iTunes can't find the recent found Apple TV. And therefore the connection is gone and the syncing don't work anymore.
Any work-around or suggestions on how to solve this?
Or do I have to revert to previus userversion of OSX to make it work again?
Is there a limitation built into OSX Server software or is there maybe some kind of firewall / preferences etc that needs to be adjusted? (The built in firewall has been disconnected.)
FYI:
All apps are up to date. The Mac Mini + Apple TV is on my local network at home and I'm trying to make it my family's digital hub for all family-related media.
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)
MacBook Pro CD2 & X-servers Mac OS X (10.4.9)1) I've not tried to reset ATV from scratch. But it works fine on other Mac's on the network (sharing).
2) Security options, yes I belive so to. I've followed all instructions and opened all ports I've seen mentioned i apples Knowledge database / support. Still don't work. Maybe I've missed some ports...
3) YES! It works fine sharing the MacMinis lib over the network.
4) Today I also tried to reinstall iTunes. But no luck.
Any mor suggestions anyone? Thx
I really wanny solve this, otherwhise my ATV is pretty useless for me... -
Trying to edit a wordpress then in dreamweaver cc with mamp but things don't work out. i've been searching through the net bt i didn't find an answer. i've followed many tutorials and did exactly the things that was asked but dreamweaver can't establish connection with my server. here's a few pics with the preferences i'm trying to establish a connection. Note that i tried it without "localhost" in the weburl. mamp is running with apache and mySql. Anyone please.
Hi Gareth,
See if the following link helps:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=174271">https://www.sdn.sap.com/irj/sdn/thread?threadID=174271</a>
Bye
Ankur -
Hello Community
Currently I have a Sharepoint 2010 Server farm.
One server contains the database and DNS server
because it is the the domain controller.
The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
Thank you
ShabeautThere is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
Unknown server error after changing password, solutions on support side don't work
After changing my password I get the "unknown server error". I already tried the solutions on the support side, but it won't work.
My system is Win 7.
I'd be so glad for any ideas,
thanksThanks for your answer. Yes, i already tried these solutions (more than
once!) but I still get the error and can't connect to the cloud.
I'd be so glad for any ideas!
Thanks in advance, take care,
Ulinna
2013/10/11 Arpit Kapoor <[email protected]>
Re: Unknown server error after changing password, solutions on support
side don't work created by Arpit Kapoor<http://forums.adobe.com/people/Arpit+Kapoor>in
Adobe Creative Cloud - View the full discussion<http://forums.adobe.com/message/5753065#5753065 -
i have iphone 4 and it worked previously but then lost service, contacted provider and said would have to do factory reset. Did the reset and now can not activate phone. said server was not working to connect to itunes. Connected to itunes and still can not activate it. any suggesgtions?
This is the iPod touch forum. I requested your post be moved to the iPhone forum
-
Ix4-300d can I run Rsync copy jobs accoss VPN
I want to set up a point to point VPN to an offsite location with an ix4-300d at each location then run copy jobs between the devices. By necessity these will be different subnets (172.16.16.x and 172.16.20.x) The user guide seems to indicate that the devices have to be on the same subnet. I need a definitive answer. Can I install an ix4-300d at each location and schedule copy jobs between the two?
Hi NASty,
The two NAS devices will have to be on the same subnet. You can find more information on the following support page: Device-to-device replication overview
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page -
After installing Update 10.6.2 Server Netboot don`t work any more
After installing the combo update 10.6.2 Server Netboot dont work any more.
This is the log oft from Serveradmin Netboot:
Nov 10 15:53:48 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:53:48 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:53:48 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:53:48 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:53:48 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:53:48 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:53:48 xserver01 bootpd[1783]: service time 0.001230 seconds
Nov 10 15:54:04 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:54:04 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:54:04 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:54:04 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:54:04 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:54:04 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:54:04 xserver01 bootpd[1783]: service time 0.001111 seconds
Nov 10 15:54:17 xserver01 bootpd[1783]: DHCP DISCOVER [en0]: 1,0:24:81:12:e1:81
Nov 10 15:54:17 xserver01 bootpd[1783]: replying to 10.0.50.97
Nov 10 15:54:17 xserver01 bootpd[1783]: OFFER sent <no hostname> 10.0.50.97 pktsize 300
Nov 10 15:54:17 xserver01 bootpd[1783]: service time 0.016331 seconds
Nov 10 15:54:17 xserver01 bootpd[1783]: DHCP REQUEST [en0]: 1,0:24:81:12:e1:81
Nov 10 15:54:17 xserver01 bootpd[1783]: replying to 10.0.50.97
Nov 10 15:54:17 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.97 pktsize 300
Nov 10 15:54:17 xserver01 bootpd[1783]: service time 0.000840 seconds
Nov 10 15:54:37 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:54:37 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:54:37 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:54:37 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:54:37 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:54:37 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:54:37 xserver01 bootpd[1783]: service time 0.015980 seconds
Nov 10 15:55:41 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:55:41 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:55:41 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:55:41 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:55:42 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:55:42 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:55:42 xserver01 bootpd[1783]: service time 0.686362 seconds
any ideas!??! The client is a MacPro G5Please refer Troubleshooting EMCA Failures in
Master Note for Enterprise Manager Configuration Assistant (EMCA) in Single Instance Database Environment [ID 1099271.1]
Thanks.... -
Problem active directory importing users at ix4-300d sw ver 4.1.108.32627
Installed new ix4-300d onto network, added to SBS 2008 domain and can log into NAS with domain\administrator account . In users & groups can see domain\administrator account along with local admin account. Click on sync with AD, no errors, but never get any users in the list
Whats the problem ? I need to get users from AD imported to get shares working.
Please help as customer is not happy.
regards
PeterHello blue256
If you entered a Organisational Unit in the Domain Management page, please try clearing the OU field and try re-adding the unit to the domain.
After that is done, please try checking if the domain user and groups are accessible from User and Groups page.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
Ix4-300d network interface going off-line
I just got a new ix4-300d to use as an iSCSI target in a relatively low-performance requirement file server.
I have used ix4-200d and ix4-300d in the past for iSCSI targets in disk-based backup scenarios wihtout issues.
I am having problems with this one, though. I am attempting to copy data to this new unit (with a VHD mounted from the iSCSI connection to the system), and while data seems to copy OK, at some point the network interface quits working somehow.
When this occurs, the unit still thinks that the interface is configured, and everything seems OK, I just cannot connect. Obviously, this causes my iSCSI initiators to die, and the VM hosted crashes hard. At that point, I have to restart the storage unit, and then reconnect my initiators, and then bring everything back online.
I've updated the firmware to the latest, but it wasn't that far out of date. I've found an article titled "Network storage device is not assigned an IP address" in the knowledgebase that points ot a problem with the software in the 4.0.2 series, and I was at 4.0.6, and am now current in 4.0.8. I am testing the process again, but wanted to check with the community to see if anyone has experienced anything similar and/or could offer some idea of why this interface quits working.
For what it's worth, the other units I have worked with were all in the 3.x series of software.
Thanks for any help/information anyone can provide.
Solved!
Go to Solution.Hi chloeroxymax,
Do you have discovery enabled?
If not, check the box for "Enable discovery with iSNS" under the iSCSI settings and select "Use local iSNS server".
Then, on your iSCSI Initiator, go to the Discovery tab. Click "Add Server" under iSNS servers and enter the IP address of the NAS.
The device should show up under the Targets tab (you may have to click the refresh button)
On your other NAS devices, go to the iSCSI settings page and select "Enable discovery with iSNS" but select "Use external iSNS server" and type in the IP address of the ix4-300d NAS.
This may help things run smoothly. If the device is still disconnecting, I would recommend contacting technical support since this is a new device and you are covered by the warranty for support.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page
Maybe you are looking for
-
Hello, I am trying to split a string into an internal table with: split content at '##' into table it_content but as the expected 6 line I only get 1 line into the table with the complete string. Any ideas? regards stefan
-
5.1 mixdown, individual tracks 10 kb in size, not playing
Folks, CS6, after converting a stereo track to 5.1 surround, am exporting the mixdown along with all tracks. While the mixdown is OK, the 6 tracks are just few KBs in size and aren't playing. What am I missing? Pls advice. Regards, Jay
-
My music copied from CD will not stay in I-tunes. It is on the computer and has to be added each time to be played
-
ITunes Interface appears scrambled
Hello, I have been using iTunes and iPod for about a year now, and this is the first time I have encountered a problem like this. Occasionally and with no discernable pattern, when I bring up my main iTunes window after having it minimized to the tas
-
Bonjour, Je cherche à pouvoir simuler un field point, est ce possible ? Cordialement