J_1IRG23D is not updating with Correct Excise DED Value,

Hi Friends,
I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values i(.e 10% ),but in the tables it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
In table -J_1IEXCDTL the EXBED it was with correct value 10% of Base value
But In table -J_1IRG23D the EXBED It was updated with 0.006% on the base value .its gives wrong value
Kindly help in this issue.
Regards
Siva

Hi Siva,
J1IG is to create depot excise invoice.
you can update J-1IRG23D table in two ways-
MIGO > Create Rg23D
OR MIGO > No excise entry and then create RG23D entry via J1IG.
For more information on the same please gothrough -
http://help.sap.com/erp2005_ehp_06/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Regards,
Brinda

Similar Messages

J_1IRG23D Table was not updated With Correct Values While Doing MIGO

Hi Friends,
I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values (i.e 10% ),but in the table it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
In table -J_1IEXCDTL the EXBED it was with correct value 10% of the Base value
But In table -J_1IRG23D the EXBED,ADE,CESS It was updated with 0.06% on the base value .its gives wrong value
Kindly help in this issue.
Regards
Siva

Hi,
Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
After J2i5 balance will update in registers including tables.
Ramesh

Lookout "Client" Not Updating with Correct Numbers

We have Lookout 6.6 processes running on full development servers at separate locations. At Station 1, Lookout is communicating with plcs collecting data. The data here is updating properly. At Station 2, we have expressions looking at data on the Lookout process running at Station 1. At Station 2, our expression might look something like this:
\\192.168.201.10\processname\modbus1.30001 192.168.201.10 is the static IP address of the Lookout computer at Station 1.
If for some reason the computer at Station 2 is restarted, the value of the expression shown above will often times be incorrect when Lookout comes back up. It will stay incorrect until the actual value of the expression changes at Station 1, or we modify the expression at Station 2 and type it in exactly as it was. Somehow, this forces the expression to update and the value will be corrected. This is causing significant problems because we cannot rely on the values shown at Station 2 to be correct on signals that aren't continuously changing.
I have installed the latest Logos engine (via a Lookout 6.7.2 install) to try and address this issue, and it does appear to be better, but the problem is still occurring. The problem is not an inability to communicate between Station 1 and Station 2, because modifying the expression at Station 2 to be exactly as it was causes the numbers to properly update.
Any suggestions to address this problem will be appreciated very much.
Jeff Miller

Thanks for the reply Ryan.
All updates for 6.0.2 are current.
I updated the hyper.cbx as noted in your post.
This did not seem to correct the problem.
We do not have any of the client laptop firewalls turned on. If I turn the server firewall on, I can't connect to the client laptops.(Seperate issue that I will deal with in another post.)
I turned the firewalls for the client laptops on and added the following exceptions to the the firewall exceptions list.
C:\Windows\system32\lkads.exe
C:\Windows\system32\lktsrv.exe
C:\Windows\system32\nicitdl.exe
C:\Windows\system32\nicitdl5.exe
C:\Program Files\National Instruments\Lookout x.x\lookout.exe
I can now connect and get the Hypertrend to work.
The first couple of times the trending was slow but by turning the
trend off, the trend would slowly load. It is now a lot faster and
probably is restricted, now by the modem speed.
Thanks for your help.
WaterWorks
http://digital.ni.com/public.nsf/allkb/0D7B86F4B4D19A5E86256F9A006EECB1?OpenDocument
http://digital.ni.com/public.nsf/websearch/8AE45BBFA1D7025E862570F200642FD8?OpenDocument
hyper1.zip (89 kb)
Message Edited by WaterWorks on 06-25-2008 06:23 PM

Contract Release Value is not updated with Confirmation or Invoice value

The release value for a contract in SRM EBP shows the value of purchase orders created using that contract. It does not take into account confirmation and/or invoice values.
For example I create a PO for 10 items at £100/each using Contract ABC. The total value of the PO is £1000 and the release value contract ABC would be £1000. If I then only confirm and invoice 5 items (£500) for the PO, the release value of contract ABC stays at £1000 even though I would expect it to update to £500
Therefore the release value of the contract could be incorrectly overstated if purchase orders are created against the contract but not actually invoiced/confirmed for their total value.
Please could you confirm the correct functionality and how I could find out the the true invoice value of purchases made using a contract?

Hi
Which SRM and R/3 versions are you using ?
Meanwhile, please go through the following SAP OSS Notes, which will help in this case ->
Note 622045 Net value in release overview of contract is incorrect
Note 493519 Release quantities are not updated
Note 1108322 BBP_CONTRACT_CHECK wrong calculation of values
Note 1102886 Contracts: Lesser Field length for Target Value
Note 1082548 Check of Released quantity and released value in contract
Note 656181 Release synchronization of releases on services
Note 874920 Currency not allowed to be changed for a 'Released' Contract
Note 703771 Resetting release values during purchase order item deletion
Note 643823 BLAREL: Incorrect values in service segment
Note 519879 BBP_CTR_MAIN: No message when values in Contract are reset
Note 520734 Target value not converted if currency is changed
Note 528897 Documents not displayed in contract release order overview
Note 430373 BBP_CON_MNT: No releases available
Note 491993 Entry of contracts with target values
Note 437491 Purchase contract: Incorrect update of the call-off values
Note 406799 BBP_CON_MNT: Fields after contract release ready for input
Note 398168 Purchase contract: Target value is not changed
Do let me know.
Regards
- Atul

MIGO not updating with excise value.

Hey Guys,
I am facing with this problem of MIGO not
updating with excise value.
When I am creating the MIGO doc, and after
I give the excise invoice no. the excise
values are not picking up. Its showing
zero values.
The following
steps are being followed by me.
ME21N - Create STO from plant to warehouse
VL04 - Create outbound delivery
VF01 - Create invoice
J1IIN - Excise invoice
MIGO - Goods receipt at warehouse
Earlier it was working fine, but after
we upgraded the system with patches and implemented
Secondary higher education cess the
problem arose.
Please advise.
Appreciate your help.
Thanks,
Zak

Got answer from SAP..dunno what they did but it was rectified.

Podcast List view not updated with iTunes 11.3.1.2

Podcast List view not updated with iTunes 11.3.1.2
Windows 7 Enterprise Service Pack 1 / Intel-i7 2.40 GHz / 8GB RAM / 64-bit
iTunes 11.3.1.2
After refreshing my Podcast list, some Podcasts with new episodes do not display the "Unplayed" blue dot.
If the podcast "folder" is expanded by clicking the triangle, the new episodes are shown with a "Unplayed" blue dot.
A new episode is shown in the My Podcast view, with the correct number of new episodes.
The new episodes are displayed in the All Unplayed view.
I've tried deleting all episodes and downloading new episodes from the iTunes Store.
I've tried Unsubscribing and deleting the podcast, then Subscribing again from the iTunes Store.
Neither attempt resolved the issue.
I've seen this issue for a while, and was disappointed to find no change with the iTunes 11.3.1.2 update.

it finally worked; got my Rush 24/7 downloaded, and it finally found my iPhone after switching from the USB 4 port Hub to a dedicated USB 2.0 slot on my laptop.

Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

Hi sebnor31,
This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CAD is not updating with Presence (CUPS)

I am not sure this is the proper place to discuss this.
I have a customer that has the following setup:
Customer is running UCCX 7.01 with Presence 7.08
The CAD client agent status' are not updating with the Presence updates
Presence Updates for one agent (Agent A) are coming in XML within the SIP message. Presence Updates for a different agent (Agent B) come in with an additional Presence layer underneath SIP. I bet CAD requires this Presence XML doc (RFC 3863) to be in the message.
Theres gotta be something in CUPS or on their CUPC config different between agent A and Agent B causing this.
Do you know what configuration on CUPS or CUPC determines whether these SIP Notifications are sent with straight XML or with Presence XML. Show them the Content-Type field in the SIP Header fields in the SIP Notify packets.
Presence, MSN Communicator, and CAD Chat can show the same agent in different states.
Can these three programs work together and get the same agent state or does one override the others?
I have attached screen shots of the Presence configuration as well as the issue with MSN Communication and Presence..

If you're ok with the presence status tracking the agents phone (on hook/ off hook) then all you'd need to check is that the agent DN (per line per device, so go to the device configuration page for the phone then click the line) at the bottom of the DN configuration page the "Users Associated with Line" is set with the correct user. This is what causes Call Manager to send out the PUBLISH to the presence server when the phone goes off hook or on hook.

Profit center not updating with plant change

We have an issue with the profit center not updating with change in delivering plant.
A CSR entered a material on a sales order but the material is not extended to their location. They select a plant to deliver the material from. At this point the profit center fills in for that plant, from the material master.
The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant. They are able to find an available item at another location so they select that location.
When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant. The profit center does not pull from the material master correctly.
Has anyone seen this issue before and developed a solution?

Hello Matthew
May be you have substitution defined in CO.
T codes 0KEM or 0KEL
See the following OSS notes:
167912 - Substitution call-up points for sales order/billing document
Hope this helps.

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

Purchase Order history is not updated with Invoice number

Hello Experts ,
Please suggest some inputs/solution for my problem.
Scenarios is :
PO --> SO --> Invoice
I am creating the invoice with the medium EDI , when I click on Save button IDOC is generated with the message " IDoc 'xxxxxxxxxxxxx' was created and forwarded for transmission " and it showing the status as 03 i.e, The IDoc was sent to an R/3 System or an external program via a transactional RFC ...but the problem is if I got to the Purchase Order history Its not updated with the Invoice number.
What could be the problem , please suggest.

Hi!
I'm not sure, in which process you link PO and SO. There are some different ways, which are totally different scenarios - if you need help here, describe more detailed.
Your invoice is probably only created with reference to SO, so check the invoice itself. In this case also the SO history should include the invoice.
Regards,
Christian

ORA-27054: NFS file system where the file is created or resides is not mounted with correct options

Hi,
i am getting following error, while taking RMAN backup.
ORA-01580: error creating control backup file /backup/snapcf_TST.f
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
DB Version:10.2.0.4.0
while taking datafiles i am not getting any errors , i am using same mount points for both (data&control files)

[oracle@localhost dbs]$ oerr ora 27054
27054, 00000, "NFS file system where the file is created or resides is not mounted with correct options"
// *Cause: The file was on an NFS partition and either reading the mount tab
//          file failed or the partition wass not mounted with the correct
//          mount option.
// *Action: Make sure mount tab file has read access for Oracle user and
//          the NFS partition where the file resides is mounted correctly.
//          For the list of mount options to use refer to your platform
//          specific documentation.

IPod not updating with iTunes

When I plug my iPod into the computer, it is not updating with iTunes.
The software version on iTunes is 1.2.1 and is the same on my iPod.
I did have a relapse last evening, as my iPod got confused. It stalled, so I had to drain the battery and recharg it. When I plugged it in today to the computer, it is not updating with iTunes - and I did update it to 7.1 version of iTunes, but the software version still says 1.2.1.
It also says my ipod is up to date with iTunes.
Please help.
Thanks,
Donnie

See if there's any help here.
iPod not recognized on a Windows laptop.
iPod not recognized on a Toshiba laptop.

While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

Howdy Mishka2015,
The article linked below details a number of troubleshooting steps that can help resolve issues with your contacts and iCloud.
Get help using iCloud Contacts
https://support.apple.com/en-us/HT204150
Sincerely,
Allen

PI 7.1 - CPA Cache not updated with directory data.

Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
 <CacheRefreshError>
 <EngineType>
 AE
 </EngineType>
 <EngineName>
 af.sxd.mchir134
 </EngineName>
 <RefreshMode>
 C
 </RefreshMode>
 <GlobalError>
 <Message>
 CPA Cache not updated with directory data.
 </Message>
 <Trace>
 com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
 at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
 at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
 at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
 ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
 at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
 at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
 ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
 at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
 at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
 at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
 ... 11 more
 </Trace>
 </GlobalError>
 <GlobalError>
 <Message>
 Confirmation handling failed.
 </Message>
 <Trace>
 com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
 at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
 at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
 at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
 at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
 ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
 at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
 at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
 ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
 at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
 at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
 at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
 at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
 ... 11 more
 </Trace>
 </GlobalError>
 </CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
Surendra

Guys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards

J_1IRG23D is not updating with Correct Excise DED Value,

Similar Messages

Maybe you are looking for