J integra alternative

Hey guys
I need a solution for a problem. i need to access outlook from java to send mails from my app. i have tried jintegra and it works but i don't want to buy it. can anyone refer me to api's or tutorials that can help me accomplish the same thing jintegra does?

Where did that requirement come from? Normally when people want to send e-mail from Java applications, they just use JavaMail code and connect it direct to their e-mail server, just like Outlook connects to the e-mail server. Trying to connect to Outlook to make it send the messages is horribly cumbersome. So don't do that. Just send the messages directly.

Similar Messages

Setting up ALE to integrate cProjects and HR CATS

Hi Gurus,
We're wondering if it is mandatory to set up ALE to integrate cProjects and HR CATS. We found SAP note 954860 and we were trying to understand it, on a functional point of view, before to send it to our Basis team.
We would like to get some advice on this.
Could you please give us any hint?
Thanks in advance for your response,
Best regards,
TP

Hi TP,
it is not mandatory. Basically you have two options for resources:
- you can create resources (business partners) manually in cProjects. then you do not need the ALE integration to HR
- or you can replicate the employee master data to cProjects. then you don't need the manual maintenance, but you have to setup the HR integration
for CATS:
- if you like to do time recording through CATS, you need the corresponding integration
- alternatively you have some easy-to-use task dashboard for the resources involved in the projects inside the cProjects appliation. Users can access the tasks they are responsible for through there. but you do not have full CATS functionality then
best regards
Thorsten

Alternative for integration process ?

The XI integration process functionality for me looks like another example of overkill design in XI. Needs lots of additional abstract message interface declarations, difficult to follow what really happens.
Question: what alternatives in XI are possible without breaking the architecure completely ? E.g. when I have to perform some simple connected steps, like call an RFC, then load a file via FTP, then send out an email with the result data. Where in XI could I define a Java or ABAP method which does that programmatically ? The communication channels have some module processors. Would that be the right place ( define a module processor in channel which receives the trigger). Are there standard functions in XI available in Java or ABAP to perform RFC, FTP...
or is it better to do it in a Java or ABAP mapping ? This does not seem to make much sense.
Any experiences or ideas ?
CSY

hi,
the complete lauch of xi is to have common place for all designed interfaces and configuration and monitoring stuffs.
client b4r getting in to xi should read his landscape and justify whether to bring in xi r not, when this step is not done, questions as mentioned above would arise around
what is the need of xi for simple function which i can do by abap , java , jco s etc..(many ask ))
but beauty of xi is tapped when the landscape around it is growing and when u want to intergrate those all systems.
i guess it's better to have xi standard congf instead peeping in to other hindden programs to do same , as it would be easily visible to all developer who come in .
IP is the class idea and u shud think if u r flow has more logic in between to be manipulated.
In in the end the moral is that every system is capable of meeting the requirment we shud be in search of which can be trusted and maitained easily as a long run ) everything is possible.
rgds
srini
Edited by: Venkateswarlu Srinivas on Jul 9, 2008 3:19 PM

Itunes alternative for KDE. Rythmbox is not integrating well

Hi,
I am not finding much information on this so I thought I would start a post. I have been using rhythmbox for music. I recently decided to bring our main computer to the KDE world from LXDE. I am trying to stick to strictly KDE programs for better integrating. I have not found an alternative to iTunes or rythmbox though. Any ideas? The problem I am having right now is that every time I try to sync with the iPod rythmbox just shuts down below starting with line 6 is what is produced during the shutdown. The previous is the initial start up of the program
I also had to install the gnome-icon-theme package which is not something that I really wanted to do.
[of@of ~]$ rhythmbox
(rhythmbox:23882): Rhythmbox-WARNING **: Unable to start mDNS browsing: MDNS service is not running
(rhythmbox:23882): libdmapsharing-WARNING **: Unable to initialize mDNS: Daemon not running
(rhythmbox:23882): libdmapsharing-WARNING **: Unable to notify network of media sharing: The avahi MDNS service is not running
(rhythmbox:23882): Rhythmbox-WARNING **: Unable to grab media player keys: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SettingsDaemon was not provided by any .service files
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
(rhythmbox:23882): Rhythmbox-CRITICAL **: playlist_track_removed: assertion `track != NULL' failed
Segmentation fault

Gcool wrote:Amarok would be the qt alternative.
Or Clementine, which most prefer nowadays.

Alternative for integrating Portal to Sap Webwas 6.20 (without ITS)

Hello
I have a scenario which I should open SAP Transactions from Uwl tasks in Portal, without ITS (as sap Webwas doesnt have embedded ITS).
I get the following error:
iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapLaunch
Nome de componente : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Application URL ':///sap(ZT01VUxMbEJHNHpWWUIzVyUyQjRZWm5lWnclM0QlM0R1NjYlMkZzcklXQ3Z4WXJPV3g5OXVvVnclM0QlM0Q=)/bc/gui/sap/its/webgui' is not valid! Please check the protocol and host entries for system 'R3_SYSTEM'..
Is there any alternative for accessing the SAP Transactions in UWL without ITS?
I tried to change the Uwl XML to call a custom view, but nothing has changed, the result is the same. I changed from:
    <ItemType name="uwl.task.webflow.TS01000096.R3_SYSTEM" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
      <ItemTypeCriteria systemId="R3_SYSTEM" externalType="TS01000096" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchSAPAction" groupAction="" handler="SAPIACLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
            <Property name="IAC" value="WS01000060"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
To:
          <ItemType name="uwl.task.webflow.TS90300030.R3_SYSTEM" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
               <ItemTypeCriteria systemId="R3_SYSTEM" externalType="TS90300030" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="launchIView" handler="IViewLauncher">
                         <Properties>
                              <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
                              <Property name="openInNewWindow" value="yes"/>
                         </Properties>
                         <Descriptions default="launchIView"/>
                    </Action>
               </Actions>
          </ItemType>
Thanks

Hi Vitor,
This is not possible.
If you want to call backend transactions you will need to use the ITS: ITS 6.20 for backend releases with kernel 6.20 (and lower) or the Integrated ITS with kernel >= 6.40. SAP notes 709038 and 325616 can give you more information.
Best regards,
Cristiano

SD-PP integration: BOM alternative

hello, friends. i wish to ask you about transfer of requirements from SD to PP.
when processing the sales order, the user can manually select the BOM alternative via a dialog box. in standard, BOM with usage 3 (universal) and 5 (SD) are supported.
i notice that after we run MRP, in the planned order the BOM usage is 1 and alternative is defaulted to the first in the order sequence. this is true if the BOM selection method in the material master MRP 4 view is either for production version or blank.
if the selection method is by key date, then the BOM in the planned order will be the first in sequence for alternatives by key date.
in variant configuration, the specific requirements are transferred. but for a simple BOM, in neither situation is the alternative selected in the sales order transferred. why is this so? are there missing settings?
hoping for your valued inputs.
many thanks.

Hi
In case of Variant configuration(VC) , the BOM Selection will be based on Dependencies assigned to the Components. In VC there is no alternative BOM Concept. There will be one Simple BOM called Super BOM which contain all the components which is required to make all the variants of K-mat.
In the sales order , the user will configure the requirements and based on the requirements selected in SO , the system will pick respective Components from Super BOM during MRP
Regards
Brahmaji

Integrated ITS on SRM:Login Page Problem

Hello All,
   I am working on SRM 4.0 with Internal ITS.I have done all the required settings for Internal ITS.I am able to get the login page but when I enter the user Id and password of my SRM system,It shows the erroe that "Incorrect SSO configuration on this server ".
   I have checked the transaction RZ11 on SRM Server for the parameter login/accept_sso2_ticket.It is set to value 0.
   Can anyone tell me what extra settings are to be done for the Integrated ITS?Please help.
Thanks & Regards,
Deepti.

Hi Raja,
   I have changed the default language in the system settings for the service BBPSTART as English.Also I have made the following changes for the same service :-
1>Changed the Logon procedure to "Alternative Logon procedure " and in that I have removed "SSO Authentication".
2>In system Logon Configuration,I have changed the default client and language.
3>In service data,I have changed the Basic authentication from Standard r/3 User to "Internet User".
After doing the above changes,I have republished the service.
Now i am getting the Login Page(in language English) but with the message "SSO cannot be used for logon To continue, choose "Logon". A dialog box appears, where you can enter your user and password. This server does not support HTTPS! It is therefore potentially unsafe to send your password ".
After that when I enter the ID and Pwd,I get the same Login screen(USER,PWD,CLIENT,LANGUAGE AND ACCESIBILITY Labels) but this time below there is the message "Inocrrect SSO configuration on this server".
Please tell me the exact changes so that I can login to the homepage.
Also to avoid the Login page,I have tried entering the Login Details in anynomous Logon data,but then I directly get the Homepage with the Menu on the Left hand Side and when I click on any of the items,I get the screen with the following text:-
SSO is not active in system
To continue, choose "Logon". A dialog box appears, where you can enter your user and password.
This server does not support HTTPS! It is therefore potentially unsafe to send your password
Copyright 2002-2004 SAP AG All Rights Reserved
I am not able to understand why the system is prompting me for the SSO settings when I have set the parameters(LOGON_ACCEPT_SSO2_TICKET AND LOGON)_CREATE_SSO2_TICKET to 0).
Please help.
regards,
Deepti.

Unit testing and integration testing

hello 2 all,
what is the diff bet unit and integration testing? in sap what is unit teesting consists of and integration testing consists of what?
is this the work of test engineers r whose work is this?
take care
love ur parents

Hi Sameer,
Unit Testing
A unit test is a procedure used to validate that a particular module of source code is working properly from each modification to the next. The procedure is to write test cases for all functions and methods so that whenever a change causes a regression, it can be quickly identified and fixed. Ideally, each test case is
separate from the others; constructs such as mock objects can assist in separating unit tests. This type of testing is mostly done by the developers and not by end-users.
Integration testing
Integration testing can proceed in a number of different ways, which can be broadly characterized as top down or bottom up. In top down integration testing the high level control routines are tested first, possibly with the middle level control structures present only as stubs. Subprogram stubs were presented in Section 2 as incomplete subprograms which are only present to allow the higher level control routines to be tested. Thus a menu driven program may have the major menu options initially only present as stubs, which merely announce that they have been successfully called, in order to allow the high level menu driver to be tested.
Top down testing can proceed in a depth-first or a breadth-first manner. For depth-first integration each module is tested in increasing detail, replacing more and more levels of detail with actual code rather than stubs. Alternatively breadth-first would proceed by refining all the modules at the same level of control
throughout the application. In practice a combination of the two techniques would be used. At the initial stages all the modules might be only partly functional, possibly being implemented only to deal with non-erroneous data. These would be tested in breadth-first manner, but over a period of time each would be
replaced with successive refinements which were closer to the full functionality. This allows depth-first testing of a module to be performed simultaneously with breadth-first testing of all the modules.The other major category of integration testing is bottom up integration testing where an individual module is
tested from a test harness. Once a set of individual modules have been tested they are then combined into a collection of modules, known as builds, which are then tested by a second test harness. This process can continue until the build consists of the entire application.
In practice a combination of top-down and bottom-up testing would be used. In a large software project being developed by a number of sub-teams, or a smaller project where different modules were being built by individuals. The sub-teams or individuals would conduct bottom-up testing of the modules which they were
constructing before releasing them to an integration team which would assemble them together for top-down testing.
I think this will help.
Thanks ,
Saptarshi

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Unity Connection integration with Outlook problem.

Hello,
We deploy CUC 7.1 and we integrate it with MS exchange 2007 and outlook, and we perform the recommended configuration to make the voice mail message to be appeared in both Unity connection voice mail store and to be sent to exchange then appeared in outlook as inbox message, we perform that by choosing Accept and Rely option in Message actions tab.
The customer want when the message accessed from the outlook the MWI on turned to MWI off!!!!!
How can i perform that?
Thanks

Hi Ahmed,
What you are wanting is not available with CUC 7.x "Accept and Relay"
In Cisco Unity Connection 7.1, you can use the accept and relay action to instruct Connection to both deliver each message of a certain type to the user mailbox and forward a copy of the message to the relay address. (This is sometimes referred to as "accept and forward.") This option may be useful for users who regularly use a device that accesses a separate server for messages, such as a handheld wireless device, and want easy access to voice messages both on the alternative device and through the Connection user interfaces. If you choose this option, the user receives two copies of each message. The copies are stored in different message stores, and any actions the user takes on the relayed copy are not reflected on the copy stored in the Connection message store.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag170.html#wp1091330
You will want to look into CUC 8.5;
New Features for Cisco Unity Connection Version 8.5
• Unified messaging with Microsoft Exchange 2010:
• Voice messages are synchronized with the Exchange inbox.
• MWI and message status are synchronized.
• Secure, private messages, mobile client, and calendar integration for Exchange 2010 are all supported.
• You can enable unified messaging for specific users or all users.
From this doc;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-634096.html
Cheers!
Rob

Satellite L305 - How to disable the integrated webcam?

I want to be able to use my logitech webcam (plugged into USB Port) instead of chicony integrated cam because I like it better. When I go on some chatting sites w video option the site usually selects the integrated cam and (from settings) does not SEE the other one whether I turned it on or not.
Can someone help? My search didn't return anything useful-- strange
Thanks

Hi buddy,
I agree with the previous user. Just disable the webcam in device manager if you make a right click on it and select disable. This is the easiest way in my opinion and also if you want to enable the webcam again.
Alternative have a look in BIOS. On my Toshiba notebook its also possible to disable the internal webcam in BIOS.
Please write some feedback if it worked or not. ;)

BW-BO integration challenge

Hello Experts,
Could someone probably suggest a good approach to my design issue.
Scenario: WEBi report on a BW Query Universe + Teradata Universe for Top X customers.
The selection for Top X (Where X is a variable) is by default 20 and has the option changing it (by user at run time). The BW universe is created on a query, which is created on a multicube which is built on 4 different infocubes.
The query runs and returns a huge set of data and does not filter the Top X in BW but does the filtering at the WEBi report level. This is a performance hit. (takes about 12 minutes). Is there a way to restrict the data that BW query returns to WEBi, so we can tackle that performance issue.
Question: Is there a way to use a user exit variable in the query and let it read from a global variable table and can we update the global variable table from WEBi dynamically from the users filter selection.
Please let me know if you have an alternative approach.
Thanks
Raju Kosuru
SAP BI Consultant

Hi,
conditions are not supported for the Web Intelligence integration in Xi 3.1 so you need to look at other options to limit the overall result - for example a custom ranking expression in the Universe.
ingo

How can I use apple remote with Mountain Lion? Any Front Row alternative?

Hi All,
I recently upgraded from Snow Leopard to Mountain Lion.
All great except for my Apple Remote control.
Before, I could effectively control my iMac media with Apple Remote by using Front Row (music, photos, videos, good integration with iTunes and iPhoto).
Now, as I understand, Front Row is expired.
So, my Apple remote still works but with very limited options (just music, forward, backward and volume), and it's a real pity.
Any of you Guys know how to restore Front Row?
Otherwise maybe suggest an alternative (sth similar, should allow iMac media control by Apple Remote)?
So far I tried to restore all Front Row files by a Time Capsule Snow Leopard backup (as indicatred on some other Communities).
To restore was easy, but then, no way to launch it.
Any advice will help!
Thanks in advance/all the best.
Marco

Thanks Klaus1 for your prompt answer, although I went again through a dated discussion.
I also got the feeling that somehow they want to push Apple TV..
But, respectfully speaking towards our Friends at Apple, is it fair to promise what you don't deliver?
I have choosen apple because I percive it's different.
At currently published link: http://store.apple.com/uk/product/MC377Z/A/apple-remote
they do promote the following:
Apple Remote with Mac
The Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It works with Front Row - a menu-based, full-screen interface - to make accessing the digital content on your Mac as simple as navigating your iPod. When you press the Menu button, your desktop fades and the sleek, Front Row interface takes its place, to give you control over your music in iTunes, your photos in iPhoto, the videos in your Videos folder and your DVDs. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slide show, a home video that you made in iMovie, even a film trailer.
Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver. Not compatible with MacBook Pro with Retina display.
Cost for this is 15£ (19€).
Now, I have iMac and Mac Book Pro (no retina display) both with Mountain Lion installed, and I understand both of them are not compatible with Front Row.
Actually I adore apple tv and I got 2 at home nicely working on 2 different TVs.
So I accomplished twice their wish of selling this product to me.
Why shall they deceive me (and many others, as I read) by killing a still promised service?
Should I read all forums before buying a trusted-brand-product like apple, to ensure that id does what declared?
Don't get me wrong, I'm an enthusiast user of the whole apple family, since many years, and still I am.
Just politely complaining for this decision, which creates to Many an easy avoidable disservice.
Cheers
Marco

How to trigger an integration process at a certain time each night.

I have an integration process to collect messages that I would like to trigger at a specific time each night. I looked at the Wait step in order to do this, but it looks like you can specify a fixed time, or a repeating time.
If I used 'Wait until Specified time', I could specify the time, but the date is a problem; I cannot fix it as a certain date because it will only work for that date only.
If I take the date from a field of the message, I'm not sure what will happen since it looks as if the date would be updated each time a message is received to the collective process.
I could take the date from the first message, and store it as a variable, then use that in the wait step, but since the date is not in the correct format, I would need to use xpath somehow to do that.
Alternatively I was thinking about using a wait for event step, and raising the event from a background job, but this only seems to be available in ABAP Workflow directly, not from the Integration Process Editor. Is it permissable to modify the generated ABAP Workflow and add a Wait for Event step to allow this to happen?
Does anybody have an opinion on the best way to proceed?

Hi,
Check these
Polling based upon availability
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
REgards
Seshagiri

Integration of APEX in OBIEE 11g fails after upgrade to APEX 4.2.1

I used a document from the german APEX forum to integrate Oracle Business Intelligence 11g (OBIEE) with APEX.
After login in OBIEE a APEX page will be called without login in APEX.
The Document is called "APEX in Oracle Business Intelligence (Oracle BI) integrieren"
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/biee-apex/index.html
In APEX 4.0 this worked great. After login in OBIEE I could call a APEX page without new login.
But after upgrading to APEX 4.2.1 now the APEX login mask is displayed.
OBIEE uses this function to create a APEX session and store the APEX session-id and username in the table apex_biee_session:
-- Function GET_APEX_SESSION_ID
-- sets up an APEX session for a BIEE user
FUNCTION get_apex_session_id (p_username IN VARCHAR2,p_days_valid IN NUMBER DEFAULT 1) RETURN VARCHAR2
IS
pragma autonomous_transaction;
l_session_id NUMBER;
l_valid_to DATE;
l_count NUMBER;
l_password VARCHAR2(4000);
BEGIN
l_valid_to := SYSDATE + NVL(p_days_valid,1);
-- Let us delete expired records:
BEGIN
DELETE FROM apex_biee_session
WHERE valid_to < TRUNC(SYSDATE,'DD');
COMMIT;
EXCEPTION
WHEN NO_DATA_FOUND THEN NULL;
END;
-- get next APEX session id:
l_session_id := apex_custom_auth.get_next_session_id;
-- Insert the BIEE user and the APEX session id in table APEX_BIEE_SESSION
INSERT INTO apex_biee_session (username, sessioN_id, valid_to)
VALUES (UPPER(p_username),l_session_id,l_valid_to);
COMMIT;
-- define an APEX user session:
apex_custom_auth.define_user_session(
p_user => UPPER(p_username),
p_session_id => l_session_id);
htmldb_application.g_unrecoverable_error := TRUE; -- tell apex engine to quit
RETURN l_session_id;
EXCEPTION
WHEN OTHERS THEN RETURN '-99';
END get_apex_session_id;
CREATE TABLE "APEX_BIEE_SESSION"
(     "USERNAME"     VARCHAR2(60),
     "SESSION_ID"     NUMBER,
     "VALID_TO"     DATE,
     CONSTRAINT "APEX_BIEE_SESSION_PK" PRIMARY KEY ("USERNAME","SESSION_ID")
In APEX this page sentry function is called:
-- Function PAGE_SENTRY
-- used as page sentry function in APEX applications
FUNCTION page_sentry RETURN BOOLEAN
IS
l_current_sid NUMBER;
l_biee_userid VARCHAR2(255);
l_cookie owa_cookie.cookie;
l_c_value VARCHAR2(255) := NULL;
l_cookie_tom owa_cookie.cookie;
l_c_value_tom VARCHAR2(255) := NULL;
l_session_id NUMBER;
l_biee_auth     VARCHAR2(1) := 'N';
BEGIN
BEGIN
-- If normal APEX user authentication is used, cookie LOGIN_USERNAME_COOKIE will be used
l_cookie_tom := owa_cookie.get('LOGIN_USERNAME_COOKIE');
l_c_value_tom := l_cookie_tom.vals(1);
l_biee_userid := UPPER(l_cookie_tom.vals(1));
EXCEPTION
WHEN OTHERS THEN NULL;
END;
l_session_id := apex_custom_auth.get_session_id; -- in APEX 4.2.1 this returns NULL
-- Do we have a record in table APEX_BIEE_SESSION with the current session id
BEGIN
SELECT UPPER(username) INTO l_biee_userid
FROM apex_biee_session
WHERE session_id = l_session_id AND valid_to > SYSDATE;
l_biee_auth := 'Y';
EXCEPTION
WHEN NO_DATA_FOUND THEN l_biee_userid := 'Failed';
END;
IF l_biee_userid = 'Failed' THEN
IF l_c_value_tom IS NULL THEN
l_biee_userid := NULL;
ELSE
l_biee_userid := UPPER(l_c_value_tom);
END IF;
END IF;
-- If l_biee_userid is NULL we need to call the APEX login page (done by RETURN FALSE)
IF l_biee_userid IS NULL THEN
RETURN FALSE;
END IF;
IF l_biee_auth = 'N' THEN
l_current_sid := apex_custom_auth.get_session_id_from_cookie;
ELSE
l_current_sid := l_session_id;
END IF;
-- This is the built-in part of the session verification
IF apex_custom_auth.is_session_valid THEN
wwv_flow.g_instance := l_current_sid;
IF apex_custom_auth.get_username IS NULL THEN
apex_custom_auth.define_user_session(
p_user => UPPER(l_biee_userid),
p_session_id => l_current_sid);
RETURN TRUE;
ELSE
IF UPPER(l_biee_userid) = UPPER(apex_custom_auth.get_username) THEN
apex_custom_auth.define_user_session(
p_user =>UPPER(l_biee_userid),
p_session_id =>l_current_sid);
RETURN TRUE;
ELSE -- username mismatch. Unset the session cookie and redirect back here to take other branch
apex_custom_auth.logout(
p_this_app=>v('APP_ID'),
p_next_app_page_sess=>v('APP_ID')||':'||nvl(v('APP_PAGE_ID'),0)||':'||l_current_sid);
wwv_flow.g_unrecoverable_error := true; -- tell htmldb engine to quit
RETURN FALSE;
END IF;
END IF;
ELSE -- application session cookie not valid; we need a new apex session
IF l_biee_auth <> 'Y' THEN
l_session_id := apex_custom_auth.get_next_session_id;
END IF;
apex_custom_auth.define_user_session(
p_user => l_biee_userid,
p_session_id => l_session_id);
wwv_flow.g_unrecoverable_error := true; -- tell htmldb engine to quit
IF owa_util.get_cgi_env('REQUEST_METHOD') = 'GET' THEN
wwv_flow_custom_auth.remember_deep_link(
p_url=>'f?'||wwv_flow_utilities.url_decode2(owa_util.get_cgi_env('QUERY_STRING')));
ELSE
wwv_flow_custom_auth.remember_deep_link(
p_url=>'f?p='||
TO_CHAR(wwv_flow.g_flow_id)||':'||
TO_CHAR(nvl(wwv_flow.g_flow_step_id,0))||':'||
TO_CHAR(wwv_flow.g_instance));
END IF;
apex_custom_auth.post_login( -- register session in htmldb sessions table, set cookie, redirect back
p_uname => l_biee_userid,
p_app_page => wwv_flow.g_flow_id||':'||nvl(wwv_flow.g_flow_step_id,0));
RETURN FALSE;
END IF;
END page_sentry;
The problem seems to be that in line "l_session_id := apex_custom_auth.get_session_id;" the call of apex_custom_auth.get_session_id is returning NULL in APEX 4.2.1.
In APEX 4.0 the call of apex_custom_auth.get_session_id returned the APEX session id.
What can I do to get this working again ?
Kind Regards,
Markus
Edited by: asmodius1 on Jan 10, 2013 2:06 PM

Hi,
this integration relies on session fixation, that's an insecure practice which is not allowed anymore since 4.1:
http://en.wikipedia.org/wiki/Session_fixation
Since the cookie value for the session id is missing, Apex rejects the session id and sets it to null, before calling the sentry function.
If you absolutely want to use this kind of integration, you will have to parse the value of owa_util.get_cgi_env('QUERY_STRING') in the sentry function to get the session id. To make it a bit more secure, the row in APEX_BIEE_SESSION should only be valid for a very short time (e.g. 1 sec). A person from Oracle Support contacted me about possible improvements to this authentication a few weeks ago. I replied with the following suggestions:
I would at least add a Y/N flag (e.g. SESSION_JOINED_BY_APEX) to the
APEX_BIEE_SESSION table. The page sentry should only accept the session
without an accompanying cookie if the flag is still N. It has to set it
to Y afterwards. This way, you ensure that the session joining without
cookie can only be done once. Maybe there should also be an alternative
way to log in to APEX, e.g. via page 101. Currently, this authentication
only accepts session IDs that were generated via OBIEE.
Users could log out of APEX or the APEX session could expire. Therefore,
the APEX app should have a post logout procedure that deletes the row in
the OBIEE session table. On the OBIEE side, APEX_SESSION_ID should
therefore be initialized on each request. The initialization code should
also check APEX_WORKSPACE_SESSIONS to make sure the session still
exists.
Regards,
Christian

J integra alternative

Similar Messages

Maybe you are looking for