J Sanders
You told me to go to Default Services via Options, as Facebook and Device Default comes up when I put in an appointment in my Calendar. Also I cannot synchronise my Calendar. The top line in Default Services says 'Calendar (CICAL) then Facebook. Below is Messaging (CMIME) then my email address. What do I do now?
batsam wrote:
You told me to go to Default Services via Options, as Facebook and Device Default comes up when I put in an appointment in my Calendar. Also I cannot synchronise my Calendar. The top line in Default Services says 'Calendar (CICAL) then Facebook. Below is Messaging (CMIME) then my email address. What do I do now?
I answered in your existing thread.
http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8900/Synchronisation/m-p/580487
There's no reason to start a new one on the same issue.,..you now have three threads going on the same issue, two in the 9300 model section and one in the 8900 model section.
Which model do you have?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Help. I just updated my iPhone and iPad software to IOS 5. Now my iPad isn't connecting to my WiFi. It "sees" it, and the network name even shows up under WiFi, but it's like it just keeps grinding and grinding. Sometimes it will let me click on the network and see the IP address. When I can see it, the address on my iPad is different from the one showing up on my desktop, but I can't figure out how to change it on my iPad. Any suggestions to get me hooked back into my wireless network?
If the problem persists after you reboot as suggested by Ralph:
Trouble connecting usually means interference, or another WiFi on the same channel.
If you have any cordless phones, keyboards, or cameras, check what frequency they use.
From a MAC or Windows machine you can see what channel each of the available networks are using. Make sure your network is on a channel nobody else nearby is also using. -
Azure Notification Hub Package Missing for Windows Phone 8.1
The WindowsAzure.Messaging.Managed nuget package version 0.1.7.6 does not support Windows Phone 8.1. Is there a package available to support Azure Notification Hub to push notifications to Windows Phone 8.1?
8.1 is not publically available. You can check with the Azure folks and ask them when there will be an update
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support) -
Calling all SharePoint 2010 users! May TechNet Gurus announced!
The results for May's
TechNet Guru competition have been posted!
http://blogs.technet.com/b/wikininjas/archive/2014/01/16/technet-guru-awards-december-2013.aspx
Congratulations to all our new Gurus for May!
We will be interviewing some of the winners and highlighting their achievements, as the month unfolds.
Post your JUNE contributions here:
http://social.technet.microsoft.com/wiki/contents/articles/24692.technet-guru-contributions-for-june-2014.aspx
Read all about June's competition, hopefully in a stickied post, at the top of this forum.
Below is a summary of the medal winners for May. The last column being a few of the comments from the judges.
Unfortunately, runners up and their judge feedback comments had to be trimmed from THIS post, to fit into the forum's 60,000 character limit, however
the full version is available on TechNet Wiki.
Some articles only just missed out, so we may be returning to discuss those too, in future blogs.
BizTalk Technical Guru - May 2014
Peter Lindgren
BizTalk 2010: Call SSO from Orchestration
TGN: "I bet a few people will love you for this, I often see this question at the forums, and you answered it well. Good work!"
Mandi Ohlinger: "Great topic and great explanation. It also makes SSO seem less scary :)"
Sandro Pereira: "Very useful sample, well explained with all the necessary code "
boatseller
BizTalk: Using an Orchestration Sync or Async
Sandro Pereira: "Good sample provide by boatseller and well explained."
TGN: "Hey, great work man! This is a well done article and I love it!"
Steef-Jan Wiggers
Exposing data through BizTalk Service Hybrid Connections
Sandro Pereira: "Nice article with a good overview about BizTalk Service Hybrid Connections and how you can configure them."
TGN: "Good article, well explained and good pictures. Again Steef-Jan, you know what you're doing!"
Mandi Ohlinger: "Nice set-up overview. "
Forefront Identity Manager Technical Guru - May 2014
Sheldon.Jaquay
Forefront Identity Manager - RCDC - Regular Expression
AM: "Great contribution! Option C is clever, and the other examples are also a useful reference. Thanks for sharing your work with the community."
Ed Price: "Nice short article. Great topic, and great blend of code, color, and images!"
Søren Granfeldt: "Nice with a little focus on RegEx with FIM and good help for people wanting to have the portal be just a little more company specific"
GO: "Thanks for the article, but the images weren't clear enough."
Scott Eastin
Installing Oracle MA for FIM R2 on Windows 2012
GO: "EX-CE-LL-EN-T article!"
AM: "Very nice article with clear step-by-step instructions - thanks for putting this together. "
Ed Price: "I love the sections with numbered bullets at the end. They're very clear and easy to read!"
Microsoft Azure Technical Guru - May 2014
João Sousa
Microsoft Azure - Remote Debbuging How To?
GO: "Clever. Well Explained and written. Thanks! You absolutely deserve the GOLD medal."
Ed Price: "Fantastic topic and great use of images!"
Alex Mang
The Move to the New Azure SQL Database Tiers
Ed Price: "Great depth and descriptions! Very timely topic! Lots of collaboration on this article from community members!"
GO: "great article but images are missing"
Alex Mang
Separating Insights Data In Visual Studio Online
Application Insights For Production And Staging Cloud Services
Ed Price: "Good descriptions and clarity!"
GO: "great article but images are missing"
Microsoft Visio Technical Guru - May 2014
Mr X
How to export your Orchestrator Runbooks to Visio and Word
Ed Price: "A basic tip, but very helpful. Good job!"
GO: "Thanks for that!"
SR: "Nice "How To" article explaining the basic steps."
AH: "This article is to the point takes a simple tasks and describes it accurately.
SharePoint 2010 / 2013 Technical Guru - May 2014
Dan Christian
Build a loop workflow using SharePoint 2010
Jinchun Chen: "Excellent article. Personally speaking, the biggest challenge is SharePoint Designer workflow is “while-loop”. Many customers had the same scene as this article set. I am sure they are like this article.
Benoît Jester: "An AWESOME, huge, detailed article by Dan. Did I mention the videos? Thanks Dan!"
GO: "Great article Dan! Thanks!"
Margriet Bruggeman: "Detailed explanation which I admire, but wouldn't be using a vs workflow be more logical in this case?"
Geetanjali Arora
Export User Profile Properties using CSOM
Benoît Jester: "Great article on this new SharePoint 2013 development capability. I appreciate the code explanations."
GO: "This is a great article. Love the way how you explain it."
Margriet Bruggeman: "I will use this piece of code in the future!"
Jinchun Chen: "Nice. How about customized properties? It would be nice more, if a CSOM script version can be attached. "
Inderjeet Singh
Unable
to restore site collection issue
GO: "Simple. Good Written. Clear and Clever. Great article."
Margriet Bruggeman: "Quite handy reference for this particular problem"
Benoît Jester: "Good explanation on the site collection deletion process."
Small Basic Technical Guru - May 2014
Philip Conrod
Programming Home Projects with Microsoft Small Basic: Chapter
1: Writing Programs Using Small Basic
RZ: "Very systematic introduction."
Ed Price: "Good overview article that covers all the basics!"
Michiel Van Hoorn: "Nice introduction into the history of Basic. Needs to be updated to reflect current support for Windows version (Windows NT? LOL )"
Philip Conrod
Programming Home Projects with Microsoft Small Basic: Chapter 6: Flash
Card Math Quiz Project
Michiel Van Hoorn: "This article (or book chapter) is excellent material to learn how to envision, design and build your program. The actual example program is also very usable."
Ed Price: "I love how this tutorial keeps building on itself as it goes!"
Nonki Takahashi
Small Basic: Variable
RZ: "Very nice explanation of the concept of variables!"
Michiel Van Hoorn: "Clear explanation and not frills"
Ed Price: "Great article with fantastic formatting!"
SQL BI and Power BI Technical Guru - May 2014
Durval Ramos
SSIS - Event Handling with "OnError" ou "OnTaskFailed"
Ed Price: "The images are very helpful! Could use a grammar pass. Great descriptions!"
GO: "This article has everything. A conclusion, reference, see also, other languages section. everybody should write actually like this."
NN: "An interesting topic and article but unfortunately a bit hard to understand due to grammar problems"
PT: "This is a good article on a useful topic. Please have your article reviewed and edited for proper language."
S Kamath
Expansion of Time dimension in Analysis Service
PT: "Your article is concise and to the point, and contains useful information. It would be good to conclude with a short summary and perhaps compare this technique to others, discussing best practices."
Ed Price: "Good details on Time Dimension. The images help us understand as we go."
GO: "I like this one, but something is missing. Do not know what, but I had a blast reading the other two's. Does not mean that this one is bad, but there is something missing, maybe my knowledge..."
NN: "Good article, but seems to be missing conclusion. It will also benefit from adding See Also section"
Sherry Li
SSAS – Ignore unrelated dimension or not
NN: "Good and interesting article based on the blog"
GO: "Wonderful article!"
PT: "This is an important topic and contains helpful information but this is a simple topic that can be explained in fewer words. I found this article to be overly detailed and hard to read. I suggest having it reviewed and edited for
proper language."
Ed Price: "Good descriptions. Could be shorter. Good use of images!"
SQL Server General and Database Engine Technical Guru - May 2014
Shanky
Curious Case Of Logging In Online and Offline Index Rebuild In Full Recovery
Model
Jinchun Chen: "Good article. Thank you!"
GO: "One of the best Wiki Articles ever! Thanks buddy!"
DRC: "-- This is a great article which provides in-depth information on internals of Online & Offline rebuild index and Transaction logging. -- The following statement need to be re-written for more clarity. “The less logging can be
attributed to the fact that no information about page allocation is logged information about de-allocation is logged please see below figure 13. Also if you compare amount of record returned in this case we had output containing just 64 rows while offline
index rebuild had ____ rows.” -- Overall, a great article, thoroughly enjoyed reading it."
NN: "Very interesting article, another great contribution by Shanky"
Ed Price: "Thorough descriptions and great solution! Good article!"
Uwe Ricken
SQL Server: Be aware of the correct data type for predicates in queries
Ed Price: "Incredibly well formatted! Great breakdown of sections!"
GO: "Whoo, this is a wonderful article!"
DRC: "-- This article explains the Query execution behaviour when the Query is not optimally written which could cause increased execution time. Great article. -- This topic is clearly explained and documented using a simple example and
sample output which is easy is understand. -- Simple, very well written and great article to read. "
NN: "Very good, easy to understand article and important information to know to all SQL Server developers"
System Center Technical Guru - May 2014
Mr X
Central Management of DSRM password on Domain Controllers using Orchestrator
Ed Price: "The images really carry you through this article. Great execution!"
GO: "Great article. I like your article Mr X! Thanks for your passion!"
Kevin Holman: "Nice to see real world examples of Orchestrator in action solving problems that all customers have. This was very simple, but provides an excellent solution."
W P Chomak
System Center Operations Manager 2012 R2 - Customizing E-Mail Notifications
AB: "Easy reading info that can help many"
Ed Price: "Short and sweet. An incredibly valuable topic and needed addition to the Wiki!"
GO: "Clever and well written. Thanks"
Christoffer S
System Center Configuration Manager 2012 R2 - Install applications in a task sequence based on AD-Groups
Ed Price: "Good mix of code, images, and information. Could use more in-depth descriptions. Great article!"
GO: "Clear and simple! Thank you!"
Transact-SQL Technical Guru - May 2014
Naomi N
T-SQL: Random Equal Distribution
Jinchun Chen: "Nice."
JS: "The crucial thing about such a procedure is to check the data before the randomization and afterwards. You might encounter situations where "John Smith" and "John Meyers" might have exchanged their First names
which is technically correct, but logically and obviously wrong. So make sure that there is one additional check afterwards that makes sure that eventual privicy concerns will not survive the random process. Normally this would not happen, but I have already
checked this is one of my older blog entries, where we exactly had that problem obfuscating data to make that operational and live data will not be recognized afterwards. http://blogs.msdn.com/b/jenss/archive/2009/04/08/when-is-random-random-enough.aspx In
addition to this some attributes are sticky to each other like gender and First Name. You also have to make sure that your distribution might change statistically in relation to other attributes."
Richard Mueller: "Very instructive. Perhaps the See Also section should have more links."
Ed Price: "Great formatting and topic! Could benefit from more descriptions. Great article!"
GO: "Naomi, your article is nice. Simple to understand the 'problem' and execute the 'solution""
Manoj Pandey: "Nice article with a different way to resolve a given problem. I think this can also be done by using NTILE() function. I've added the code in comments section."
Rogge H
Extending SYS.Geometry to Utilize Temporal Data
GO: "Great article, I enjoyed reading it. Thank you"
Manoj Pandey: "I like the idea, but it took me some more time to understand the overall logic as I'm new to Geo datatypes, Thanks."
JS: "For me not using this sort of things regularly, I don't see the problem and the benefit. I have no doubt that this is a brilliant explanations how to cope with a problem, but for me this is missing yet the red line. More pictures
would be helpful describing the problem and outlining the results produced."
Richard Mueller: "Needs more explanation, and perhaps an example. There should be links to relevant references."
Ed Price: "Good job on the opening descriptions! Could benefit from breaking up and explaining the code more. Images and references would be helpful. Good article!"
Hasham Niaz
DataCleanUp() Function Implementation in MS SQL Server
Jinchun Chen: "Good."
JS: "-Does actually not work for Case senstive areas where I want to remoce certain Upper/lower case characters. This might be not interesting for some people, but is extremely important and relevant to other people. The limitation is
that I can´t pass multiple values to be removed from the string, right ? Could this be implemented as well as many people wash out their data from unused / unimportant control characters. "I have tested it on a table which has got more than 11 Million
rows and it executed fine returning the correct results. Since this is a scalar function you will notice decrease in performance." Once you want to maintain the old data and keep the new cleaned up one seperately, you could suggest something like persisting
the data in a computed column which could be indexed and then help improving the performance. This would not be the case for any adhoc queries though."
Richard Mueller: "Very clever and also very useful. There should be links to references, for example to explain the PATINDEX function."
Ed Price: "Great job on this article! Very clear and well executed! See JS's comments for some thoughts about what's possible. Great article!"
Manoj Pandey: "A good utility Function that I can use and tweak for my future needs, Thanks."
Jaliya Udagedara
Calling WCF Service from a Stored Procedure in Microsoft SQL Server 2012
GO: "Gold Winner. For sure!"
Ed Price: "Amazing article! The depth, images, and code formatting make this fantastic!"
NN: "Great article, thorough explanations, great interaction in the comments - very useful tutorial"
Søren Granfeldt: "Nice work."
João Sousa
ASP.NET MVC 5 - Bootstrap 3.0 in 3 Steps
GO: "Thanks for that great article"
Ed Price: "Great formatting! Good use of images!"
NN: "Nice introduction to Bootstrap in ASP.MVC project"
Søren Granfeldt: "Just a little more technical explanation would be nice"
Critical_stop
Using 64-bit shortcuts from a 32-bit application
NN: "Good and short article, right to the point"
Søren Granfeldt: "Mixing and matching 32/64 bit always seems to give people a hassle. This will help those having issues."
GO: "good one!"
Ed Price: "Good article. Short and sweet."
Wiki and Portals Technical Guru - May 2014
XAML guy
TechNet Guru Competition: Judge System Explanation
GO: "No one could do it beter than you Pete! Thanks!"
Richard Mueller: "Excellent explanation of the judging system. Perhaps could use a See Also section."
Ed Price: "Good quote from Shanky in the comments, "Awesome....Kudos to your for your beautiful work" -- Great job!"
NN: "Very good article. It may also benefit from See Also section"
Payman Biukaghazadeh
TechNet Wiki Persian Council
GO: "Go Persion GOOO!"
Richard Mueller: "The Persian Council is an excellent idea. The link to "How to Write an Article" should be in a See Also section, along with other articles."
NN: "Great article, missing a link to other portals and councils pages"
Ed Price: "Thank you to Payman and the Persian community for jumping in! The Wiki is warm!"
Durval Ramos
Wiki: Best Practices for building TechNet Wiki Portals
Ed Price: "Fantastic job from Durval on helping us standardize the portals!"
NN: "Good article, but unfortunately a bit hard to read and understand due to bad grammar. "
Richard Mueller: "Excellent and important topic. Grammar still needs work. I like the links and See Also."
Windows Phone and Windows Store Apps Technical Guru - May 2014
Sara Silva
Authentication using Facebook, Google and Microsoft account in WP8.0 App (MVVM)
Ed Price: "Great article! Great code formatting and good use of code comments for descriptions of what your code's doing! Could be improved by breaking out the code with more descriptions in the article (in addition to
the code comments). Very in-depth article! "
Peter Laker: "An excellent article, pulling together all the bits you need to make this happen"
SubramanyamRaju.B
WindowsPhone Facebook Integration:How to post message/image to FaceBook Fan
Page(C#-XAML)
Ed Price: "Good topic! Code blocks would help with the formatting. Good job on this article!"
Peter Laker: "Love this, very useful to many I'm sure, thanks!"
Saad Mahmood
Creating a custom control in Expression Blend with Custom Properties (WindowsPhone
& Store)
Ed Price: "This has a good mix of descriptions and clarity! The images help a lot!"
Peter Laker: "A nice introduction to our beloved Blend. Great work!"
Windows Presentation Foundation (WPF) Technical Guru - May 2014
Magnus (MM8)
WPF/MVVM: Merging Cells In a ListView
KJ: "Ah the collectionViewSource -- never used it myself but this looks like a good reference article if I ever needed to..."
GO: "Thank you!"
Ed Price: "Great formatting and good descriptions. Short and sweet! Another fantastic entry from Magnus!"
Peter Laker: "Thank you again Magnus"
Windows Server Technical Guru - May 2014
Mr X
How to implement User
Activity Recording for AD-Integrated Critical Servers by combining the use of Group Policy, Powershell and Orchestrator
Philippe Levesque: "Really good information and detailed step."
JH: "brilliant, love how it combines different technologies to achieve a solution, clearly written and well illustrated."
JM: "Another excellent article, thanks again for your many great contributions"
Richard Mueller: "Very creative solution. Great to have such detailed steps and images."
GO: "I like the conclusion. Thanks"
Mr X
How Domain Controllers are located in Windows
GO: "Super article Mr X! Merci!"
JM: "Yet again, excellent article."
Richard Mueller: "Good documentation. An explanation of how the priorities and weights are determined would help. A See Also section would also help."
Philippe Levesque: "Good "In deep" information. Good to know to help diagnose computer problem in AD's site."
JH: "another good article, great diagrams. Some repetition but it does help clarify a complex issue. "
Mahdi Tehrani
Detailed Concepts:Secure Channel Explained
JH: "great article. This fills an important gap in this content space. Editing is a little rough, but diagrams and explanations are clear."
JM: "This is a very good article, however you need to provide more detail in the section on how to fix a broken Channel."
Richard Mueller: "Excellent topic. Grammar needs work. Good images. Could use a See Also section."
Philippe Levesque: "Really good explanation of the secure's channel, I like the debugging step included ! "
GO: "Thanks for this, not everybody know about secure channel."
As mentioned above, runners up and their judge feedback were removed from this forum post, to fit into the forum's 60,000 character limit.
A great big thank you to EVERYONE who contributed an article to last month's competition.
Hopefully we will see you ALL again in this month's listings?
As mentioned above, runners up and comments were removed from this post, to fit into the forum's 60,000 character limit.
You will find the complete post, comments and feedback on the
main post.
Please join the discussion, add a comment, or suggest future categories.
If you have not yet contributed an article for this month, and you think you can write a more useful, clever, or better produced wiki article than the winners above,
here's your chance! :D
More about the TechNet Guru Awards:
TechNet Guru Competitions
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to the one and only
TechNet Wiki, for future generations to benefit from! You'll never get archived again!
If you are a member of any user groups, please make sure you list them in the
Microsoft User Groups Portal. Microsoft are trying to help promote your groups, and collating them here is the first step.Congrats to Dan, Geetanjali, and Inderjeet!
SharePoint 2010 / 2013 Technical Guru - May 2014
Dan Christian
Build a loop workflow using SharePoint 2010
Jinchun Chen: "Excellent article. Personally speaking, the biggest challenge is SharePoint Designer workflow is “while-loop”. Many customers had the same scene as this article set. I am sure they are like this article. "
Benoît Jester: "An AWESOME, huge, detailed article by Dan. Did I mention the videos? Thanks Dan!"
GO: "Great article Dan! Thanks!"
Margriet Bruggeman: "Detailed explanation which I admire, but wouldn't be using a vs workflow be more logical in this case?"
Geetanjali Arora
Export User Profile Properties using CSOM
Benoît Jester: "Great article on this new SharePoint 2013 development capability. I appreciate the code explanations."
GO: "This is a great article. Love the way how you explain it."
Margriet Bruggeman: "I will use this piece of code in the future!"
Jinchun Chen: "Nice. How about customized properties? It would be nice more, if a CSOM script version can be attached. "
Inderjeet Singh
Unable
to restore site collection issue
GO: "Simple. Good Written. Clear and Clever. Great article."
Margriet Bruggeman: "Quite handy reference for this particular problem"
Benoît Jester: "Good explanation on the site collection deletion process."
Also worth a mention were the other entries this month:
Restore Mistakenly deleted site collection without any backup by
Inderjeet Singh
Margriet Bruggeman: "Didn't know that that was possible! Although to unreliable to use in an enterprise env, but still loving it!"
Benoît Jester: "Interesting article: how to restore a site collection with a "simple" PowerShell command."
Resolve InfoPath Web Form Issue on Public Websites by
Dan Christian
Benoît Jester: "A tricky resolution, well detailed by Dan, as usual!"
GO: "Again a great post of Dan! Thanks buddy!"
Margriet Bruggeman: "Thorough overview of this particular problem"
Find email listed for access requests in SharePoint 2010/2013 by
Marrell Sanders
Jinchun Chen: "Nice. Sometimes, a site owner left the company, but the site owner was not updated. When you are trying to request access to this site, you are always waiting. Site Collection administrator can use this script to review all the
request emails are available in schedule. "
Benoît Jester: "A useful script, as this feature is often badly used by users. ("Why am I receiving these emails?")"
GO: "Good one Thanks!"
Margriet Bruggeman: "Nice little script"
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working
So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: Default-First-Site-Name
Roaming Profile: N/A
Local Profile: C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS CSE Policy
Windows SBS Client - Windows Vista Policy
Windows SBS Client Policy
Update Services Client Computers Policy
C-Create Syntiro Root Folders
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
Windows SBS Client - Windows XP Policy
Filtering: Denied (WMI Filter)
WMI Filter: Windows SBS Client - Windows XP
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
OPTI9020-01$
Domain Computers
System Mandatory Level
USER SETTINGS
CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS User Policy
Windows SBS CSE Policy
Small Business Server Folder Redirection Policy
U-Word 2013 Default Save Location
U-Office 2013 Disable Backstage
U-Office Disable Start Screen
U-Office Trust Center Settings
U-Word Autorecover Location
U-Word Autosave Interval
U-Word Disable Capitalization First Word
U-Word Set Arial Default Font
U-Word UI Customizations
U-Power Plan Settings
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
Domain Users
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
Windows SBS Link Users
Windows SBS Fax Users
Windows SBS SharePoint_MembersGroup
Windows SBS Folder Redirection Accounts
Windows SBS Remote Web Workplace Users
High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet. -
HT4527 how to move my itunes library from my Ipod to a NEW PC
My Laptop had to be reformatted and as a result I lost access to Itunes. I was not able to save any of my backups nor my iTunes library.
I am trying to sync my iPod and iPhone to my NEWLY formatted hard drive and iTunes wants to WIPE my devices.
Is there a way to "PUSH" the iTunes library from my iPod To my laptop?
Thanks,
Willie J. Sanders, Jr.I thought I just explained this.
The sync is one way - computer to ipod. The exception is itunes purchases: File>Transfer Purchases
You can transfer itunes purchases form your ipod to your computer: Open itunes, connect ipod, click File Transfer Purchases
Did you fail to maintain a backup copy of your computer?
You may be able to purchase a program to get the other music -
WP8.1 Universal : Error Image does not have a candidate in main app package while creating a package
Hi everyone :
I just finished an universal app was gonna publish it on the store, on windows 8.1 no problem
On Windows Phone 8.1 I got error when creating the app package for every images I declared in the app manifest
"App manifest references the image 'Assets\Tiles\StoreLogo.png' which does not have a candidate in main app package"
Here is a par of my manifest with my assets
<m3:VisualElements DisplayName="Spirit Of Metal" Square150x150Logo="Assets\Tiles\Square150x150Logo.png" Square44x44Logo="Assets\Tiles\Square44x44Logo.png" Description="SoM.WindowsPhone" ForegroundText="light" BackgroundColor="transparent">
<m3:LockScreen Notification="badgeAndTileText" BadgeLogo="Assets\BadgeLogos\BadgeLogo.png" />
<m3:DefaultTile Square71x71Logo="Assets\Tiles\Square71x71Logo.png" Wide310x150Logo="Assets\Tiles\Wide310x150Logo.png" DefaultSize="square150x150Logo">
<m3:ShowNameOnTiles>
<m3:ShowOn Tile="square150x150Logo" />
<m3:ShowOn Tile="wide310x150Logo" />
</m3:ShowNameOnTiles>
</m3:DefaultTile>
<m3:ApplicationView MinWidth="width320" />
<!--Used in XAML Designer. DO NOT REMOVE-->
<m3:InitialRotationPreference>
<m3:Rotation Preference="portrait" />
</m3:InitialRotationPreference>
</m3:VisualElements>
I made clean, delete tempory files, restart visual studio, delete and add the picture again, open the
manifest file to check manualy the path (it is correct with backslash)... without result.
Finaly I found a fix : generate app bundle at never, as my app has no specific
assets in other language I don't understand why.
Is this a bug (and I would like to report it) or is there a reason to this exception ?
RegardsI cannot reproduce this. Can you create a very simple repro of this issue and post to OneDrive?
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support) -
Query to group by based on partial count match
Dear experts,
Here is a challenge question.
I have a table a on Oracle 11i – this is how it is defined.
desc a
Name Null Type
STORE_NUMBER NOT NULL CHAR(9)
ASSORTMENT_NUMBER NOT NULL CHAR(9)
ITEM_NUMBER NOT NULL CHAR(9)
DESCRIPTION CHAR(1000)
UPC_CODE NOT NULL CHAR(15)
STOCK_FLAG CHAR(1)
AVG_RTL_PRICE CHAR(16)
SALES_MOVEMENT CHAR(16)
PROD_STYLE CHAR(50)
COLOR CHAR(50)
ATT_1 CHAR(50)
ATT_2 CHAR(50)
ATT_3 CHAR(50)
ATT_4 CHAR(50)
ATT_5 CHAR(50)
ATT_6 CHAR(50)
ATT_7 CHAR(50)
ATT_8 CHAR(50)
ATT_9 CHAR(50)
ATT_10 CHAR(50)
ATT_11 CHAR(50)
ATT_12 CHAR(50)
ATT_13 CHAR(50)
ATT_14 CHAR(50)
ATT_15 CHAR(50)
25 rows selected
Primary Key as Store_number, Assortment_number, item_number. Therefore, for a particular assortment number, one store will have no two records of the same item_number.
Now, I want to add some more custom conditions to my extract from this table; we are doing this manually on an xls file by applying some formula. Wondering if we can do this by a sql query.
Here are the conditions –
1. From table a, for any particular assortment_number, count of items belonging to a store. E.g –
Count of items Store_number
5 1011
7 1022
23 1033
12 1044
2. This is more challenging. From table a, for stores with the same count of item_numbers, list down the store numbers which have the same count of items and same items in the set under them. E.g – as below.
Count of items Store_number Item_number Match Indicator Matching Stores
5 3 123|12|1234|12|1 N
5 24 123|123|123|123|123 Y 22|234
5 21 123|451|2341|234|5100 N
5 22 123|123|123|123|123 Y 24|234
5 456 123|12|1|2|3 N
5 234 123|123|123|123|123 Y 22|24
3 45 12|123|12 Y 222|150
3 432 21|34|56 Y 123
3 222 12|123|12 Y 45|150
3 123 21|34|56 Y 432
3 150 12|123|12 Y 45|222
The above table may get positions shifted to its left due to formatting.
Appreciate your time and effort.
Thank You.create table tmp_storeaggbyitem as
select
ltrim(trim(a.store_number),0) as store,
ltrim(trim(a.item_number),0) as item
from guide_pog_item_mstr a
where ltrim(trim(a.assortment_number),0) = '25571'
)Sample data in the table looks like this -
Store Item
49 59310
49 59315
49 59114
49 59295
63 59310
63 59315
63 59314
63 59308
138 59310
138 59315
138 59114
138 59295
174 8399
174 6132
174 6129
174 6137
174 6175
270 8399
270 6132
270 6129
270 6137
270 6175
343 8399
343 6132
343 6129
343 6137
343 6175Here is the result set I am looking for -
Store Count of Items Item Matching Stores
49 4 59310|59315|59114|59295 49|138
63 4 59310|59315|59314|59308 None
138 4 59310|59315|59114|59295 49|138
174 5 8399|6132|6129|6137|6175 174|270|343
270 5 8399|6132|6129|6137|6175 174|270|343
343 5 8399|6132|6129|6137|6175 174|270|343
.....Which version of the database are you using? The LISTAGG fucntuion (which is avaialble in Oracle 11.2, but not in 11.1) might be helpful here.
>
We are using Oracle Enterprise Edition 11.2.0.1.0 - 64 bit
Pl/Sql release 11.1.0.1.0
>
Why are you using the CHAR datatype instead of VARCHAR2? It may have nothing to do with this prolem, but it will cause other problems.
>
Agreed. I asked the same to my design team I inherited this table from. We are working out on the new table soon.
Thanks, Sanders. -
How to Load the Resource Master for Generic Resources by Department?
We are using P6 enterprise version in our company having a central database.
Q1a.) We set the Activities view > Resource Usage Spreadsheet > Select View 1) By Resource OR 2) By Role.
The result is the spreadsheet presents the Remaining Early Units by Resource OR by Role. Other spreadsheets behave the same way. Is it possible to view the total Remaining Early Units and not have it separated by Resource OR Role?
Q1b.) We would like to find out the recommended structure to load Generic Resources (ie. professional and trades such as Civil Engineer, Mechanical Engineer, Carpenter, Welder etc.) for each Department (ie. 8221, 9362, 8524 etc.) into the Resource Library. Example: we would like to load Civil Engineer once for departments 8221, 9362, 8524, load Welder once for departments 9362, 8524, etc.
We contacted Primavera Support and they pointed us to use Roles.
Thank-you for any suggestions you may have.i think you could try to model it like this:
- define a single "mech eng" role in the role tree (not too deep or even a flat list). no dept's mentioned here. keep the role tree strictly "speciality" oriented or anyway according to their technical classification.
Role ID Role Name
Engr Engineer
.......Engr.SE Structural Engineer
.......Engr.EE Electrical Engineer
.......Engr.ME Mechanical Engineer
- define any number of resources (either individuals, or teams or even a combination of the two) in the resuorce tree.
1 eng with a capacity of 8h/d, a fixed formation (team) regardless of the number of individuals would still have a capacity of 8h/d if they can only accomplish tasks together. if assigning a team of 5 means means faster for fixed workload or more for fixed duration then define a fixed team (again if this is the case) as a single resource with a capacity of 40h/d or simply define and assign the required number of individual eng's 8h/d max each. use activity duration type to switch between duration driving and non-driving resource usage.
e.g.
Resource ID Resource Name Resource Type Default Units / Time Max Units/Time Primary Role Roles
.......*ElecEng Electrical Engineers* Labor 20.00h/d 20.00h/d Electrical Engineer Electrical Engineer
..............EE1BARBW Barb Wire, Senior Electrical Engineer Labor 10.00h/d 10.00h/d Electrical Engineer Electrical Engineer, Project AQ
..............EE2BILLS Bill Sanders, Junior Electrical Engineer Labor 10.00h/d 10.00h/d Electrical Engineer Electrical Engineer, Consultant
.......*MechEng Mechanical Engineers* Labor 10.00h/d 0.00h/d Mechanical Engineer Mechanical Engineer
..............MechEng T1 mech eng team 1 Labor 8.00h/d 8.00h/d Mechanical Engineer Mechanical Engineer
..............MechEng T2 mech eng team 1 Labor 16.00h/d 16.00h/d Mechanical Engineer Mechanical Engineer
.....................MechEng T2.1 ME 2.1 Labor 8.00h/d 8.00h/d Mechanical Engineer Mechanical Engineer, Consultant
.....................MechEng T2.2 ME 2.2 Labor 8.00h/d 8.00h/d Mechanical Engineer Mechanical Engineer
- create the necessary res to role associations. one employee or team (i.e. res) can be linked to one primary qualification and several other proffesions or specialities (i.e. roles)
- when assigning to activities, if a particular individual/ team is required assign directly the res. select several activities requiring mech eng, select 1 or several mech eng's and assign them (use resource security to limit user's access to certain res nodes).
- if any res with a particular role can perform the task, assign the role. later on if you decide for a res, you can assign a particular resource through the previously assigned role. decide applicable rates and h/d between role and res.
- you can track allocation in spreadsheets and histograms by resource or role (or by activity for both). if individual res have clear capacities, for roles you can chose between custon role limits (manual) and system calculated for each role based on res having that as primary qualification (user pref)
- you can report by activity / WBS / project / portfolio (tracking)
- solve over-allocation by levelling, by switching between res for the same role, etc
- optimise duration vs. load and/or # of res/roles (and viceversa)
Edited by: Tibi on Oct 9, 2009 9:40 PM
Edited by: Tibi on Oct 9, 2009 9:59 PM -
Data formatting and reading a CSV file without using Sqlloader
I am reading a csv file to an Oracle table called sps_dataload. The table is structured based on the record type of the data at the beginning of
each record in the csv file. But the first two lines of the file are not going to be loaded to the table due to the format.
Question # 1:
How can I skip reading the first two lines from my csv file?
Question # 2:
There are more fields in the csv file than there are number of columns in my table. I know I can add filler as an option, but then there are
about 150 odd fields which are comma-separated in the file and my table has 8 columns to load from the file. So, do I really have to use filler
for 140 times in my script or, there is a better way to do this?
Question # 3:
This is more of an extension of my question above. The csv file has fields with block quotes - I know this could be achieved in sql loader when we mention Occassionally enclosed by '"'.
But can this be doable in the insert as created in the below code?
I am trying to find the "wrap code" button in my post, but do not see it.
Heres my file layout -
PROSPACE SCHEMATIC FILE
; Version 2007.7.1
Project,abc xyz Project,,1,,7,1.5,1.5,1,1,0,,0,1,0,0,0,0,3,1,1,0,1,0,0,0,0,2,3,1,0,1,0,0,0,0,3,3,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Subproject,25580-1005303.pst,,102,192,42,12632256,1,1,102,192,42,1,12632256,0,6,1,0,32896,1,0,0,0,0,,,-1,-1,-1,-1,0,0,0,-1,-1,-1,-1,-1,-1,0,0,0,-1,-1,-1,-1,-1,-1,0,0,0,-1,-1,0,1,1,,,,,,1
Segment, , , 0, 102, 0, 0, 0, 0, 0, 0, 0, 0, 0, , , , , , , , , , , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, 0, , , 1
Product,00093097000459,26007,2X4 MF SF SD SOLR,,28.25,9.5,52.3, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.60,0,0,0,0,00,-1,0
Product,00093097000329,75556,"22""X22"" BZ CM DD 1548",,27,7,27, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.20,0,0,0,0,0,0,0,,345.32
Product,00093097000336,75557,"22""X46"" BZ CM XD 48133",,27,7.5,51, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.20,0,0,0,0,0,0,0,0
Product,00093097134833,75621,"22""X22"" BZ CM/YT DD 12828",,27,9,27, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.20,0,0,0,0,0,0,0,,1
This is my table structure -
desc sps_dataload;
File_Name Varchar2 (50) Not Null,
Record_Layer Varchar2 (20) Not Null,
Level_Id Varchar2 (20),
Desc1 Varchar2 (50),
Desc2 Varchar2 (50),
Desc3 Varchar2 (50),
Desc4 Varchar2 (50)
Heres my code to do this -
create or replace procedure insert_spsdataloader(p_filepath IN varchar2,
p_filename IN varchar2,
p_Totalinserted IN OUT number) as
v_filename varchar2(30) := p_filename;
v_filehandle UTL_FILE.FILE_TYPE;
v_startPos number; --starting position of a field
v_Pos number; --position of string
v_lenstring number; --length of string
v_record_layer varchar2(20);
v_level_id varchar2(20) := 0;
v_desc1 varchar2(50);
v_desc2 varchar2(50);
v_desc3 varchar2(50);
v_desc4 varchar2(50);
v_input_buffer varchar2(1200);
v_delChar varchar2(1) := ','
v_str varchar2(255);
BEGIN
v_Filehandle :=utl_file.fopen(p_filepath, p_filename, 'r');
p_Totalinserted := 0;
LOOP
BEGIN
UTL_FILE.GET_LINE(v_filehandle,v_input_buffer);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
-- this will read the 1st field from the file --
v_Pos := instr(v_input_buffer,v_delChar,1,1);
v_lenString := v_Pos - 1;
v_record_layer := substr(v_input_buffer,1,v_lenString);
v_startPos := v_Pos + 1;
-- this will read the 2nd field from the file --
v_Pos := instr(v_input_buffer,v_delChar,1,2);
v_lenString := v_Pos - v_startPos;
v_desc1 := substr(v_input_buffer,v_startPos,v_lenString);
v_startPos := v_Pos + 1;
-- this will read the 3rd field from the file --
v_Pos := instr(v_input_buffer,v_delChar,1,3);
v_lenString := v_Pos - v_startPos;
v_desc2 := substr(v_input_buffer,v_startPos,v_lenString);
v_startPos := v_Pos + 1;
-- this will read the 4th field from the file --
v_Pos := instr(v_input_buffer,v_delChar,1,4);
v_lenString := v_Pos - v_startPos;
v_desc3 := substr(v_input_buffer,v_startPos,v_lenString);
v_startPos := v_Pos + 1;
-- this will read the 5th field from the file --
v_Pos := instr(v_input_buffer,v_delChar,1,5);
v_lenString := v_Pos - v_startPos;
v_desc4 := substr(v_input_buffer,v_startPos,v_lenString);
v_startPos := v_Pos + 1;
v_str := 'insert into table sps_dataload values('||v_filename||','||v_record_layer||','||v_level_id||','||v_desc1||','||v_desc2||','||v_desc3||','||v_desc4||')';
Execute immediate v_str;
p_Totalinserted := p_Totalinserted + 1;
commit;
END LOOP;
UTL_FILE.FCLOSE(v_filehandle);
EXCEPTION
WHEN UTL_FILE.INVALID_OPERATION THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20051, 'sps_dataload: Invalid Operation');
WHEN UTL_FILE.INVALID_FILEHANDLE THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20052, 'sps_dataload: Invalid File Handle');
WHEN UTL_FILE.READ_ERROR THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20053, 'sps_dataload: Read Error');
WHEN UTL_FILE.INVALID_PATH THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20054, 'sps_dataload: Invalid Path');
WHEN UTL_FILE.INVALID_MODE THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20055, 'sps_dataload: Invalid Mode');
WHEN UTL_FILE.INTERNAL_ERROR THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20056, 'sps_dataload: Internal Error');
WHEN VALUE_ERROR THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE_APPLICATION_ERROR(-20057, 'sps_dataload: Value Error');
WHEN OTHERS THEN
UTL_FILE.FCLOSE(v_FileHandle);
RAISE;
END insert_spsdataloader;
/Justin, thanks. I did happen to change my pl sql procedure using utl_file.get_file and modifying the instr function based on position of ',' in the file, but my procedure is getting really big and too complex to debug. So I got motivated to use external tables or sql loader as plan b.
As I was reading more about creating an external table as an efficient way and thus believe I can perhaps build an extern table with my varying selection from the file. But I am still unclear if I can construct my external table by choosing different fields in a record based on a record identifier string value (which is the first field of any record). I guess I can, but I am looking for the construct as to how am I going to use the instr function for selecting the field from the file while creating the table.
PROSPACE SCHEMATIC FILE
; Version 2007.7.1
Project,abc xyz Project,,1,,7,1.5,1.5,1,1,0,,0,1,0,0,0,0,3,1,1,0,1,0,0,0,0,2,3,1,0,1,0,0,0,0,3,3,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Subproject,25580-1005303.pst,,102,192,42,12632256,1,1,102,192,42,1,12632256,0,6,1,0,32896,1,0,0,0,0,,,-1,-1,-1,-1,0,0,0,-1,-1,-1,-1,-1,-1,0,0,0,-1,-1,-1,-1,-1,-1,0,0,0,-1,-1,0,1,1,,,,,,1
Segment, , , 0, 102, 0, 0, 0, 0, 0, 0, 0, 0, 0, , , , , , , , , , , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, 0, , , 1
Product,00093097000459,26007,2X4 MF SF SD SOLR,,28.25,9.5,52.3, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.60,0,0,0,0,00,-1,0
Product,00093097000329,75556,"22""X22"" BZ CM DD 1548",,27,7,27, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.20,0,0,0,0,0,0,0,,345.32
Product,00093097000336,75557,"22""X46"" BZ CM XD 48133",,27,7.5,51, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.20,0,0,0,0,0,0,0,0
Product,00093097134833,75621,"22""X22"" BZ CM/YT DD 12828",,27,9,27, 8421504,,0,,xyz INC.,SOLAR,,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,1,000000.20,0,0,0,0,0,0,0,,1For example, if I want to create an external table like this -
CREATE TABLE extern_sps_dataload
( record_layer VARCHAR2(20),
attr1 VARCHAR2(20),
attr2 VARCHAR2(20),
attr3 VARCHAR2(20),
attr4 VARCHAR2(20)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY dataload
ACCESS PARAMETERS
( RECORDS DELIMITED BY NEWLINE
BADFILE dataload:'sps_dataload.bad'
LOGFILE dataload:'sps_dataload.log'
DISCARDFILE dataload:'sps_dataload.dis'
SKIP 2
VARIABLE 2 FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"' LRTRIM
MISSING FIELD VALUES ARE NULL
+LOAD WHEN RECORD_LAYER = 'PROJECT' (FIELD2, FIELD3,FIELD7,FIELD9)+
+LOAD WHEN RECORD_LAYER= 'PRODUCT' (FIELD3,FIELD4,FIELD8,FIELD9)+
+LOAD WHEN RECORD_LAYER= 'SEGMENT' (FIELD1,FIELD2,FIELD4,FIELD5)+ LOCATION ('sps_dataload.csv')
REJECT LIMIT UNLIMITED;
{code}
While I was reading the external table documentation, I thought I could achieve similar things by using position_spec option, but I am not getting behind its parameters. I have highlighted italics in the code above(from LOAD WHEN....FIELDS....), the part I think I am going to use, but not sure of it's construct.
Thank you for your help!! Appreciate your thoughts on this..
Sanders. -
Failed to install win 8.1 app package on Windows 10
Hi all,
The app package complied with VS2013 on Windows 8.1 fails to install on Windows 10. This is expected ??
The package could be successfully installed on Window 8.1, bug failed on Windows 10. Here is the screen shot.Hi Dong,
The error message you show give you instructions for looking up the activity ID. Please so that and let us know the result.
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)
Hi Jeff,
I got the log, paste it here. Thanks.
PS C:\Users\dong> Get-AppxLog -ActivityID a1fac9b5-6bd0-0003-b06a-29a4d06bd001
Time ID Message
4/2/2015 9:37:26 AM 301 The calling process is C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
4/2/2015 9:37:26 AM 604 Started deployment Add operation on a package with main parameter: file:///D:/pr
ojects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Test/win81app_1.0.0.
0_Win32.appx, dependency parameters: file:///D:/projects/win81app/AppPackages/wi
n81app/win81app_1.0.0.0_Win32_Test/Dependencies/x86/Microsoft.VCLibs.x86.12.00.a
ppx, file:///D:/projects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Te
st/Dependencies/x64/Microsoft.VCLibs.x64.12.00.appx and Options:
ForceApplicationShutdownOption. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues.
4/2/2015 9:37:26 AM 157 The app package signature was validated for core content of the app package
published by CN=dong. Payload won't be validated until the files are read.
4/2/2015 9:37:26 AM 170 The streaming reader was created successfully for app package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g.
4/2/2015 9:37:26 AM 157 The app package signature was validated for core content of the app package
published by CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond,
S=Washington, C=US. Payload won't be validated until the files are read.
4/2/2015 9:37:26 AM 170 The streaming reader was created successfully for app package
Microsoft.VCLibs.120.00_12.0.21005.1_x86__8wekyb3d8bbwe.
4/2/2015 9:37:26 AM 157 The app package signature was validated for core content of the app package
published by CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond,
S=Washington, C=US. Payload won't be validated until the files are read.
4/2/2015 9:37:26 AM 170 The streaming reader was created successfully for app package
Microsoft.VCLibs.120.00_12.0.21005.1_x64__8wekyb3d8bbwe.
4/2/2015 9:37:26 AM 10002 Creating Resiliency File C:\ProgramData\Microsoft\Windows\AppRepository\4f281c8e
-bfc1-465e-bd8d-538fd2991196_S-1-5-21-1213812938-303559523-3196125145-1000_3.rsl
c for Add Operation on Package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g.
4/2/2015 9:37:26 AM 607 Deployment Add operation on package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g has been
de-queued and is running for user WIN-TNFE02CEC5L\dong.
4/2/2015 9:37:26 AM 613 Adding uri to the list of Uris: file:///D:/projects/win81app/AppPackages/win81ap
p/win81app_1.0.0.0_Win32_Test/win81app_1.0.0.0_Win32.appx.
4/2/2015 9:37:26 AM 613 Adding uri to the list of Uris: file:///D:/projects/win81app/AppPackages/win81ap
p/win81app_1.0.0.0_Win32_Test/Dependencies/x86/Microsoft.VCLibs.x86.12.00.appx.
4/2/2015 9:37:26 AM 613 Adding uri to the list of Uris: file:///D:/projects/win81app/AppPackages/win81ap
p/win81app_1.0.0.0_Win32_Test/Dependencies/x64/Microsoft.VCLibs.x64.12.00.appx.
4/2/2015 9:37:26 AM 605 The last successful state reached was BundleProcessed. Failure occurred before
reaching the next state Indexed.
4/2/2015 9:37:26 AM 401 Deployment Add operation with target volume C: on Package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g from: (file:///
D:/projects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Test/win81app_1
.0.0.0_Win32.appx) failed with error 0x80073CF9. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues.
4/2/2015 9:37:26 AM 404 AppX Deployment operation failed for package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g with error
0x80073CF9. The specific error text for this failure is: Deployment Add
operation with target volume C: on Package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g from: (file:///
D:/projects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Test/win81app_1
.0.0.0_Win32.appx) failed with error 0x80073CF9. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues.
PS C:\Users\dong>
Regards.
Dong. -
ListView jiggles horizontally when large item about to scroll in or out in Windows Phone 8.1 Preview
If you have a ListView (in a Windows Phone 8.1 Store app, running on the developer preview 8.10.123979.895) in which you do not explicitly constrain the size of your list view's item template (e.g., because you'd like it to resize automatically when
the screen is rotated, or to adapt well to larger screen sizes), a problem arises if some of the items in your list want to be wider than the screen. They are correctly cropped, but as you scroll down through the list, the whole list jiggles left and right
as the long item is about to scroll into view, or shortly after it has scrolled out of view.
The built-in Calendar app suffers from this problem, by the way, so even if it's possible to avoid this in my own app, the Calendar app needs fixing... If you create a large number of appointments on a single day, where most of the appointments have short
names, but one has a long name, and you then tap the day to expand its list of appointments for that day, you'll see this jiggling from left to right as you scroll through the appointments.
Here's some code that reproduces the problem:
XAML:
<Page
x:Class="Wp81ScrollBug.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d"
Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
<Grid>
<ListView
x:Name="myList">
</ListView>
</Grid>
</Page>
Codehind for that:
using System.Linq;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Navigation;
namespace Wp81ScrollBug
public sealed partial class MainPage : Page
private string[] _source =
Enumerable.Range(1, 80).Select(i => "Short " + i)
.Concat(new[] { "This item is much longer than the rest and causes problems as virtualization adds and removes it" })
.Concat(Enumerable.Range(81, 80).Select(i => "Short " + i)).ToArray();
public MainPage()
InitializeComponent();
NavigationCacheMode = NavigationCacheMode.Required;
myList.ItemsSource = _source;
protected override void OnNavigatedTo(NavigationEventArgs e)
You can get rid of the problem by adding this inside the ListView:
<ListView.ItemTemplate>
<DataTemplate>
<ContentControl Width="480" Content="{Binding}" />
</DataTemplate>
</ListView.ItemTemplate>
but this is unsatisfactory, because it no longer handles orientation changes or different screen sizes - when you rotate the screen, the long item doesn't get to use the whole width.The Jiggle is due to virtualization and an attempt to fit the contents. The only solution I can think of is to set the width based on the orientation.
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support) -
How to create a file in application data local folder which is not hidden in windows store app?
I want to create a log file in ApplicationData local folder.
m_StorageFile = await ApplicationData.Current.LocalFolder.CreateFileAsync(m_Name.Replace(" ", "_") + ".log",
CreationCollisionOption.OpenIfExists);
First time when my app is launched, the file gets created and logs are written.
When I close my app, and re run the app once again, the log file that was created is now hidden and when i try to call
the code : m_StorageFile = await ApplicationData.Current.LocalFolder.CreateFileAsync(m_Name.Replace(" ", "_") + ".log",
CreationCollisionOption.OpenIfExists);
m_StorageFile is NULL.
How can i prevent the file from becoming Hidden or ReadOnly.
ThanksHere is a very simple sample that works fine. Start with this and see what you are doing different.
XAML:
<Page
x:Class="LocalStorage.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:LocalStorage"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d" Loaded="Page_Loaded">
<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
<TextBox x:Name="outputTxt" HorizontalAlignment="Left" Margin="76,82,0,0" TextWrapping="Wrap" VerticalAlignment="Top" AllowDrop="True" PlaceholderText="No Data read from local file" Width="791"/>
<Button Content="Store Data" HorizontalAlignment="Left" Margin="73,145,0,0" VerticalAlignment="Top" Click="Button_Click" />
</Grid>
</Page>
C#
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Runtime.InteropServices.WindowsRuntime;
using Windows.Foundation;
using Windows.Foundation.Collections;
using Windows.Storage;
using Windows.UI.Xaml;
using Windows.UI.Xaml.Controls;
using Windows.UI.Xaml.Controls.Primitives;
using Windows.UI.Xaml.Data;
using Windows.UI.Xaml.Input;
using Windows.UI.Xaml.Media;
using Windows.UI.Xaml.Navigation;
// The Blank Page item template is documented at http://go.microsoft.com/fwlink/?LinkId=234238
namespace LocalStorage
/// <summary>
/// An empty page that can be used on its own or navigated to within a Frame.
/// </summary>
public sealed partial class MainPage : Page
public MainPage()
this.InitializeComponent();
private async void Button_Click(object sender, RoutedEventArgs e)
if (m_StorageFile != null)
try
string userContent = outputTxt.Text;
if (!String.IsNullOrEmpty(userContent))
await FileIO.WriteTextAsync(m_StorageFile, userContent);
else
// should be some info to write
catch (FileNotFoundException)
// do something
private StorageFile m_StorageFile;
private async void createFileOrGetFile()
m_StorageFile = await ApplicationData.Current.LocalFolder.CreateFileAsync("sample.log", CreationCollisionOption.OpenIfExists);
private async void Page_Loaded(object sender, RoutedEventArgs e)
createFileOrGetFile();
if (m_StorageFile != null)
try
string fileContent = await FileIO.ReadTextAsync(m_StorageFile);
outputTxt.Text = fileContent;
catch (FileNotFoundException)
// do something!
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support) -
Why can't I make a change to my template?
I have a template with editable regions and non-editable. The footer is no-editable but I can't make a change to it. I have the telephone number listed twice in the footer and want to remove one of them but can't do it. I get the circle with a line through it when I try to modify it. Nor can I make the change on the pages made from the template. What to do? http://mountainartistsguild.org
Here's the code for my template:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>Mountain Artists Guild and Gallery, Prescott AZ</title>
<!-- InstanceEndEditable -->
<link href="../main.css" rel="stylesheet" type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">
h1, h2, h3, h4, h5, h6 {
font-weight: bold;
h1 {
font-size: 20px;
color: #000;
h2 {
font-size: 16px;
color: #000;
h3 {
font-size: 16px;
color: #000;
h4 {
font-size: 14px;
color: #000;
h5 {
font-size: 12px;
color: #000;
h6 {
font-size: 12px;
color: #993300;
a:link {
color: #993300;
text-decoration: underline;
a:visited {
text-decoration: underline;
color: #993300;
a:hover {
text-decoration: underline;
color: #993300;
a:active {
text-decoration: underline;
color: #993300;
</style>
<!-- InstanceBeginEditable name="head" -->
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
<!-- InstanceEndEditable -->
</head>
<body>
<div class="container">
<div class="header"><!-- end .header -->
<p> </p>
<p> </p>
<p> </p>
<p> </p>
</div>
<div class="sidebar1">
<ul class="nav">
<li></li>
<li></li>
<li></li>
<li></li>
</ul>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="../index.html">Welcome</a></li>
<li><a class="MenuBarItemSubmenu" href="../about.html">About Us</a>
<ul>
<li><a href="../about.html">About MAG</a></li>
<li><a href="../leaders.html">Leaders</a></li>
<li><a href="../calendar.html">Meeting Calendar</a></li>
<li><a href="../room_rental.html">Room Rental</a></li>
<li><a href="../library.html">Library</a></li>
<li><a href="../faq.html">FAQ</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="../workshops.html">Workshops</a>
<ul>
<li><a href="../workshops_2013.html">2013</a> </li>
<li><a href="../open_studios.html">Open Studios</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="../main_gallery.html">Gallery</a>
<ul>
<li><a href="../main_gallery.html">Main Gallery</a></li>
<li><a href="../spotlight_room.html">Spotlight Room</a></li>
<li><a href="../masters_room.html">Masters' Room</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="../upcoming_events.html">Events</a>
<ul>
<li><a href="../studio_tour.html">Studio Tour</a></li>
<li><a href="../upcoming_events.html">Upcoming Events</a></li>
<li><a href="../art_in_town.html">Art in Town</a></li>
</ul>
</li>
<li><a href="http://prescottartfestivals.com">Art Festivals</a></li>
<li><a class="MenuBarItemSubmenu" href="../scholarships.html">Youth Activites</a>
<ul>
<li><a href="../scholarships.html">Scholarships</a></li>
<li><a href="../kidsfest.html">Kidsfest</a></li>
<li><a href="../bigs_littles.html">Bigs & Littles</a></li>
</ul>
</li>
<li><a href="../prescott_links.html" class="MenuBarItemSubmenu">Links</a>
<ul>
<li><a href="../prescott_links.html">Prescott</a></li>
<li><a href="../sponsors_links.html">Sponsors</a></li>
<li><a href="../artists_links.html">Artists</a></li>
</ul>
</li>
<ul>
<li><a href="../prescott_links.html">Prescott</a></li>
<li><a href="../sponsors_links.html">Sponsors</a></li>
<li><a href="../artists_links.html">Artists</a></li>
</ul>
</li>
<li><a href="../contact.html">Contact Us</a></li>
</ul>
<p> </p>
<p><a href="http://visitor.constantcontact.com/manage/optin/ea?v=001Md2lQvja6UBBEQy3X2JMHY0qNMYNDvJqqy pofIxr-EVHHypkoPUYb0h19RIQV9BL9fpH0zwk93h2JDm8ghFBQw==">Join our Mailing List</a></p>
<p><a href="../pdf/newletter.pdf">View our Newsletter</a><a href="http://www.mountainartistsguild.org/pdf/newsletter.pdf"></a></p>
<p><a href="http://www.facebook.com/pages/Mountain-Artists-Guild-and-Gallery-MAG-Prescott-Arizona/1691 06459867375">Like us on Facebook!</a><a href="http://www.facebook.com/pages/Mountain-Artists-Guild-Prescott-Arizona/169106459867375"></a></p>
<p><a href="http://www.facebook.com/pages/Mountain-Artists-Guild-Prescott-Arizona/169106459867375"><img src="http://www.mountainartistsguild.org/48x48Facebook_icon.png" height="48" width="48" /></a></p>
<!-- InstanceBeginEditable name="lower_sidebar" -->
<p style="color: #930"><a href="../pdf/OfficalMAGhistory-2.pdf">Read about the History of MAG</a></p>
<!-- InstanceEndEditable --><!-- end .sidebar1 --></div>
<!-- InstanceBeginEditable name="content" -->
<div class="content">
<h1><a href="http://prescottartfestivals.com/"><img src="../images/PAF button.png" alt="Prescott Art Festivals" width="120" height="48" hspace="20" align="right" /></a>Welcome to the Mountain Artists Guild and Gallery.</h1>
<h2><a href="../pdf/OfficalMAGhistory-2.pdf">Read about the History Of MAG.</a></h2>
<h2><a href="http://www.facebook.com/pages/Mountain-Artists-Guild-and-Gallery-MAG-Prescott-Arizona/1691 06459867375?ref=ts&fref=ts"><img src="../images/48x48Facebook_icon.png" width="48" height="48" hspace="80" align="right" /></a><a href="../pdf/MAGMembership2012.pdf">Click here for a membership form.</a></h2>
<h2> </h2>
<h2 align="center"> </h2>
<p></p>
<br />
<!-- START EMBED CODE -->
<script type="text/javascript" src="http://bgnieb.slideshowpro.com/m/embed.js"></script>
<div id="album-369510"></div>
<script type="text/javascript">
SlideShowPro({
attributes: {
id: "album-369510",
width: 700,
height: 300
mobile: {
auto: false
params: {
bgcolor: "#ffffff",
allowfullscreen: true
flashvars: {
xmlFilePath: "http://bgnieb.slideshowpro.com/images.php?album=369510",
paramXMLPath: "http://bgnieb.slideshowpro.com/m/params/chromeless.xml",
navAppearance: "Visible on Rollover",
transitionStyle: "Drop",
feedbackPreloaderAppearance: "Hidden",
transitionPause: 2
</script>
<!-- END EMBED CODE -->
<p> </p>
<p align="center">Congratulations to Keith Sanders, our new promotional winner!<br />
<br />
<img src="../images/TaosInspirationsWeb.jpg" alt="Tao Inspirations by Keith Sanders" width="648" height="539" /><br />
</p>
<p align="center">“Taos Inspirations” watercolor, Promotional Winner 2013, by artist Keith Sanders<br />
</p>
<p> </p>
<p> </p>
<p><img src="../images/art and soul/Canyon Mei-June Liao.JPG" alt="Canyon Pastel" width="370" height="296" hspace="14" align="left" /></p>
<p> </p>
<p>Our Current Gallery Show is Art and Soul.</p>
<p>Here is the Best of Show winner <br />
Canyon Pastel by Mei-June Liao.</p>
<p><a href="../main_gallery.html">See all the winners by visiting the Main Gallery page.</a></p>
<p> </p>
<p> </p>
<p> </p>
<p><a href="http://www.artthe4th.com"><img src="http://www.mountainartistsguild.org/links/art_the_fourth.jpg" alt="Prescott's 4th Friday Art Walk" align="left" height="134" width="225" /></a></p>
<p> </p>
<p>Visit our Gallery each month as part of the 4th Friday Art Walk. Enjoy an Artists' Reception, Guest Artist Demonstration, great camaraderie and refreshments, too. </p>
<p> </p>
<p><br />
</p>
<div>
<p><br />
Welcome to the Mountain Artists Guild and Gallery</p>
<p>This year's theme is Arizona's Centennial.</p>
<h2>Mountain Artists Guild, Inc.</h2>
</div>
<h2>Mission </h2>
<h4>Mountain Artists Guild, Inc. is a nonprofit organization dedicated to the promotion of the visual arts. </h4>
<h2> Vision</h2>
<h4>Mountain Artist Guild is the destination for visual arts in Northern Arizona. </h4>
<h2>Guiding Principals</h2>
<h4>The Guiding Principles of Mountain Artists Guild is to be:</h4>
<h4> A cohesive volunteer-based art center<br />
A learning center for artists<br />
A gathering place for artists and community organizations for mutual interaction<br />
A respected provider of exhibition opportunities for members and other artists<br />
A resource for artists for information and art enhancement<br />
An organization free of debt with adequate physical plant and parking facilities.</h4>
<p align="center"><img src="http://www.mountainartistsguild.org/images/logos/100xlogo.png" height="93" width="100" /></p>
<p align="center">Supported in part by the Arizona Commission on the Arts with funding <br />
from the State of Arizona and the National Endowment for the Arts.<br />
<br />
Mountain Artists Guild is also sincerely grateful for funding from:<br />
<br />
J.W. Kieckhefer Foundations,<br />
National Endowment for the Arts,<br />
Margaret T. Morris Foundation, and <br />
Prescott Area Arts & Humanities Council.</p>
<br />
<div>
<p align="center"><a href="http://www.azarts.gov/"><img src="http://www.mountainartistsguild.org/links/100x90AZComission.gif" alt="Arizona Commission on the Arts logo" height="90" width="100" /></a><img src="http://www.mountainartistsguild.org/links/20x50_transp.gif" height="50" width="20" /><a href="http://www.nea.gov/"><img src="http://www.mountainartistsguild.org/links/100xNatl_Endowment.gif" alt="National Endowment for the Arts logo" height="90" width="100" /></a><img src="http://www.mountainartistsguild.org/links/20x50_transp.gif" height="50" width="20" /><a href="http://www.prescottarts.org/"><img src="http://www.mountainartistsguild.org/links/100xPrescott_Area_Arts.gif" alt="Prescott Area Arts & Humanities Council logo" height="90" width="100" /></a></p>
</div>
<h2 align="center"> </h2>
<p> </p>
<!-- end .content -->
</div>
<!-- InstanceEndEditable -->
<div class="footer">
<h6>Mountain Artists Guild, Inc. ▪ 228 North Alarcon in Prescott, Arizona 86301<br />
Office Hours ▪ Monday - Friday 9 AM to 3 PM ▪ Phone 928.445.2510 928.445.2510 ▪ Fax 928.776.4861<br />
Gallery Hours ▪ Monday - Friday 10 AM to 4 PM ▪ Saturday 11 AM to 3 PM ▪ Phone 928.776.4009 <br />
Website Design: SitesByBeth.com | <a href="mailto:[email protected]">Contact</a> </h6>
<!-- end .footer --></div>
<!-- end .container --></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
<!-- Start of StatCounter Code for Default Guide -->
<script type="text/javascript">
var sc_project=7538717;
var sc_invisible=1;
var sc_security="d112dfc6";
</script>
<script type="text/javascript"
src="http://www.statcounter.com/counter/counter.js"></script>
<noscript>
<div class="statcounter"><a title="hits counter"
href="http://statcounter.com/free-hit-counter/"
target="_blank"><img class="statcounter"
src="http://c.statcounter.com/7538717/0/d112dfc6/1/"
alt="hits counter"></a></div>
</noscript>
<!-- End of StatCounter Code for Default Guide -->
</body>
<!-- InstanceEnd -->
</html>The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory. -
Need info on moving databases to Z10
J Sanders.
IN your last reply to my comments, you said that MOST of the "feature requests I made", were already implemented on the OS 10.1. However, I couldnt find the following:
a) How to move to next/previous email without going back to email list?
b) How to migrate all the WORD SUBSTITUTION shortcuts from Torch 9800 to Z10 OS 10.1 ?
c) How to migrate all the MEMO notes from Torch 9800 to Z10 OS 10.1 ?
d) How to migrate all the VOICE RECORDS from Torch 9800 to Z10 OS 10.1 ?
Pls confirm which one of the above was taken into consideration on 10.1 and where can I find info on how to do it. I called BB support center, and they didnt know.
Thanksdcamposs wrote:
J Sanders.
IN your last reply to my comments, you said that MOST of the "feature requests I made", were already implemented on the OS 10.1. However, I couldnt find the following:
a) How to move to next/previous email without going back to email list?
b) How to migrate all the WORD SUBSTITUTION shortcuts from Torch 9800 to Z10 OS 10.1 ?
c) How to migrate all the MEMO notes from Torch 9800 to Z10 OS 10.1 ?
d) How to migrate all the VOICE RECORDS from Torch 9800 to Z10 OS 10.1 ?
Pls confirm which one of the above was taken into consideration on 10.1 and where can I find info on how to do it. I called BB support center, and they didnt know.
Thanks
I will, and it will take some time, so later today I should have time to explain those how-to's.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Need help with an innerjoin issue
Hello; I am writting a small app for my web site and have run into an issue with an innerjoin. Let me explain what the function is for this so maybe you can understand what I am doing. There are 2 pages to this. Page 1, is a category selection page.
-
MAPPING.NO_MAPPINGPROGRAM_FOUND in JDBC Scenario
I have the problem:. The scenario I have is Abap Proxy -> JDBC asynchronous, configure everything you need and the system threw me no errors. But when running the interface the system tells me the following error: System failure <s:SystemError <detai
-
Safari not loading pages completely or at all
Safari 7.0,6 has stopped loading some pages. It partially loads a page and then hangs up (spinning beach-ball). Other pages don't load at all. This is a recent occurrence. It even hung up going to Apple.com. I am running Mavericks and accord
-
Old hard drive died; can't sync with new HD
Hello! I recently replaced my hard drive on my computer. When I go to sync my nano, it gives me the option only to "Erase and Sync" my ipod with the music that is already on my hard drive. This would mean I would lose everthing on my nano, including
-
Web Service navigator - external service
Shuld the web service navigator be able to test external web services? (i.e. 3rd party external web services available from companies like Xignite, StrikIron etc..) I have tried but with no success. We have WSDL and can test with other web service to