J1I5 - 'Error occured in number assignment for object J_1IRG1'
Dear Friends,
Please help me.I got the following error while clicking on Register entry button.
"Error occured in number assignment for object J_1IRG1".
How can I correct it.
Regards,
Rubin
maintain numer ranges for this object.
or check in SNUM.
Regards
Peram
Similar Messages
-
Error occured in number assignment for object RESB
Hello all,
While creating the production order, I am getting error as "Error occured in number assignment for object RESB" ,
How to solve this error?
Regards,
SagarIn SNRO for Object RESB, check the definition i.e. the intervals, number ranges assigned, the buffer setup. If you're not familiar with this, seek help from your basis personnel.
-
Internal number assignment for object
Hi Experts,
While creating PM order the error comes"Internal number assignment for object AUFTRAG"(numbers are in critical area).
I am not able to create order.
Please help.
Regards
VishalHi Vishal
Your number range might have exhausted, you need to extend it through T-code SNRO. number range object (AUFTRAG). click numbr range button then change interval & extend the to number
shakti -
Internal Number Assignment for Object QMERKRUECK
Hi Gurus,
When I clicked on SMPL( sample calculation) in the Sample tab of the Inspection plan (QA02) I got the below Information error " Internal Number Assignment for Object QMERKRUECK (Numbers are in critical area).
Though we have enough number range why this Information error is coming? Couold you please explain the cause and how to avoid it?
Thanks in advance,
ShashidharHi Shashidar,
Actually its gap
Reason: some times number ranges overlap or missing from the buffer data base system will happen very rarely.
in our QM module, below objects error chances may happen
- QLOSE (Inspection lots in QM)
- QMEL_NR (Number range - message)
- QMERK (Confirmation number)
- QMERKMALE (Master inspection characteristics in QSS)
- QMERKRUECK (Confirmation number of an inspection characteristic in QM results processing)
- QMETHODEN (Inspection methods in QM)
- ROUTING_Q (Number ranges for inspection plans)
- QCONTROLCH (Quality control chart)
Read Notes 504875 and 678501.
Thanks
Shiva -
Internal number assignment for object AUFTRAG
Hello,
Previously with SAP PM module we had configured the maintenance work order number range for internal assignment to a narrow range of numbers i.e. 12000000 to 12999999.
Following rolling out the functionality to other sites, we required to extend the internal number range (to accomodate the volume to be produced) and have updated this in configuration i.e. 300,000,000,000 to 399,999,999,999.
We are now experiencing an information message each time we Save a new maintenance work order;
Internal number assignment for object AUFTRAG (numbers are in critical area)
Message no. RU 153
When the user clicks Enter to continue a warning message is also displayed on the status bar;
Number XXXXXX for order type XXX within critical area
Message no. CO 395
However, we have investigated this and the work orders are creating normally after this. We have created in the system, the work orders with the prevous number range and also hunders of work orders with the new number range, we do not appear to be experiencing our buffer.
I have check the settings in SNRO config setting. The settings appear as standard with a warning buffer of 5% and the No. of numbers in buffer = 20.
Please can anyone advise how to remove this information message or how to update the system to resolve.
Regards,
HayleyThe message is given by the number range function, according to the configuration of field percentage. You have entered 5% - which means when you reach within 5% of the end of the numbers, you should get the warning. Your range is 300,000,000,000 to 399,999,999,999 My calculation that you should get the warning around 395,000,000,000
I suspect that the issue is linked to buffering of the numbers. Is it resolved?? -
J1i5 gives number assignment error for object j_1irg1
Hi Friends,
while executng j1i5 for update of RG1 register , system gives error "Number not assigned for object j_1irg1" whearas it is already maintained for the specified excise group(30 in my case & doc year 2008) via snro. Friends, Pl let me know where else I need to do any settings required for this.
Thanks & Best Regards,
Atul KDear Atul,
Check with:
T. Code: SNUM
Object: J_1IRG1
Excise Group: 30
Maintain the Number Range for the Financial Year.
Best Regards,
Amit
Note: Alternatively, check the same with:
T. Code: J1I9 -
Error: Number range for object RESB does not exist
Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number
range or interval has been maintained in Customizing of MRP or if t
number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term plannin
MDTB MRP list
Procedure
Check the number ranges in Customizing. If you do not have the necessa
authorization, please get in touch with your systems administration.Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object MRES/DREQ
No. From Number To Number Curr Number Ext
01 0000000001 8999999999 380 blank
02 9000000000 9500000000 blank checked
RB 9500000001 9999999999 blank checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM -
Alphanumeric number range for object QMERKRUECK
Hi all
I have raised a question on number range object QMERKRUECK few days back.
Internal number assignment for object QMERKRUECK (numbers are in critical area)
With reference to the same please let me clear, if it is possible to create alpha numeric number range for the same object.
I tried in SNRO but system does not allow for this.Next is , if any userexits are there to achieve this.
I know, this issue is hardly seen in any implementation but if anybody has gone through this and got a proper solution, please share your experience.
Regards
D MohantyHello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh -
EDI Error : "Number assignment for ML document is incorrect"
Hi All,
We are getting the below error in EDI invoice generation.
"Number assignment for ML document is incorrect".
We have checked the number range for Material Ledgers. And the status is fine.
We are using EDI for Inbound invoice creation.
Can any body please guide us to solve this issue?
Regards
RSHi Srikanth,
The document types are assigned to the Parnter. But how will it be related to the Material Ledger.
We are getting the error while number assignment for Material Ledger Document.
Did we miss any settings are missing related to Material Ledger?
Regards
RS -
PL/SQL: ORA-04052: error occurred when looking up remote object.
Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
KanchanaHi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009* -
Number range for object BANF does not exist
Hi Guru's
I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below despite changing the numbering range on the affectred documents. Please help.
Number range for object BANF does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term planning)
MDTB MRP listHello,
You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
E.g for NB doc type number range number is 20
and in OMH7 number range number 20 has interval from- 2000000000 to 2099999999
same way
for RV doc type number range number is 21
and in OMH7 number range number 21 has interval from- 2100000000 to 2199999999
Regards,
Shailesh -
Excise Number Range for Object J_1IEXCLOC
Dear All ,
I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
Regards,
Swapnil Vaidya>
swapnil vaidya wrote:
> Dear All ,
>
> I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new invoice number, whether it will be 0000000002 or 0000000301.
>
> Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
>
> Regards,
>
> Swapnil Vaidya
It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
Regards,
Aroop
PS: Your question is more relevant for SD than MM. -
Error occurred while retrieving policy for this computer (0x8009310b)
Hey I was wondering if someone could help me out. I applied the CU3 to SCCM SP1 CU2 and since then I'm having issues with OSD I keep getting the error..
Error occurred while retrieving policy for this computer (0x8009310b)
here is the log files..
Retrieving Policy Assignments: TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {4bf8faa2-5d00-4a90-b9e5-383b0871efb0}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {cc26aff9-ab59-4984-a3ac-f008380f048f}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {f08e9723-d51a-416d-82ff-d2f1d6fcfc58}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {50feec00-f6cf-4805-97ab-5a228fdd873a}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {0acbe4de-ab99-472b-8d7a-de75bc10e6d1}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {2ccc1bec-7f9c-48bd-b94f-262ffa9711af}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {8ffdf237-4b86-41e7-ad68-a80ca1ddbe99}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {69456004-d3af-4f66-b425-8bb09d98a6a1}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {2fd8694e-bec7-41a6-ab25-fb8f0a275489}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {f032b175-e84a-4a4b-b2e5-3e804b66a528}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {e37f6b90-a1ff-4ce1-849d-936c8be4fc2b}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {c54e27c2-233b-454d-a277-8514b5e0ae8d}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {926ae109-a321-4826-90a9-577f565225a3}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {a9516dcf-f248-46af-b051-0367a0134e65}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {509b6c13-4fd3-443e-98c7-4703a9fb338c}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {050b9a4e-0776-439d-8d7c-e54cca9091f3}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {5b8d7b35-86f7-42b6-945f-faa62701421c}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {1fd389bc-2825-4e6a-a8fe-c3e50150818b}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {76aa3bc7-1c40-4415-b533-8b20c914afe0}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {a5eaed00-afb8-48ab-b030-e7809f0dd432}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {10054616-84aa-4f21-8b74-f6ae6142b794}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {a16430b4-b87c-4450-862d-3ee632df4db9}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {211060af-cae0-41a2-847c-ce08245d5900}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {ba947774-81a4-4ebf-a86d-1f05a7c5bc9a}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {2ad8b520-3701-4a07-ba92-09c25c9ee970}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {8ff1fc52-f1aa-44de-ab31-7fc3f7ed7266}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {279361f7-9750-473a-9ca9-f82b5b19f047}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {a64b913a-2318-4f57-b223-6af3b82bac3a}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {6a762475-f76c-4b91-bb00-3550fec86c4c}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {09c0bb21-01c0-41eb-a39e-5d8274ed2b99}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {730b6fe3-103a-4f65-866a-36eab232610e}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {d500add8-54c9-4c9f-a08f-9a84715d5ea8}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {cd900a7b-8469-4b35-93ba-d0d15c37b689}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment B0120000-B0100004-3B5BFFE2. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment SRC10000. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {947a63da-65e5-41bc-8a3c-1ee201618fbd}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment {SMS000US}. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment B0120059-B01000AD-6F6BCC28. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment DEP-B0120059-B0100003-6F6BCC28. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment DEP-B0120059-B0100005-6F6BCC28. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Processing Policy Assignment DEP-B0120059-B0100022-6F6BCC28. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Successfully read 41 policy assignments. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Downloading policy body B0120059-B01000AD-6F6BCC28. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Preparing Policy Body Request. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Setting transport. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Setting policy location = http://<mp>/SMS_MP/.sms_pol?B0120059-B01000AD-6F6BCC28.1_00. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Executing Policy Body Request. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
CLibSMSMessageWinHttpTransport::Send: URL: MZINFCCMPRD01.brownell.local:80 GET /SMS_MP/.sms_pol?B0120059-B01000AD-6F6BCC28.1_00 TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Error. Status code 404 returned TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Found a secure policy. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Trying to decode policy. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
CryptDecryptMessage ( &DecryptParams, pbEncrypted, nEncryptedSize, 0, &nPlainSize, 0 ), HRESULT=8009310b (e:\qfe\nts\sms\framework\smscrypt\windes.cpp,339) TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Decoding in non ssl mode failed. Checking if decoding was really needed. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Failed to verify a properly formed XML. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
oPolicy.RequestPolicy((GetPolicyFlags() & POLICY_SECURE) != 0, (GetPolicyFlags() & POLICY_COMPRESS) != 0), HRESULT=8009310b (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,2067) TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Failed to download policy B0120059-B01000AD-6F6BCC28 (Code 0x8009310b). TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
(*iTSPolicyAssignment)->GetObjects(pszClassName, aTSPolicyObjectArray ), HRESULT=8009310b (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,1224) TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
m_pPolicyManager->GetObjects( TS::Policy::TaskSequence::GetClassNameW(), TS::Policy::TaskSequence::GetPolicyCategory(), TS::Policy::TSPolicyAssignment::POLICY_TS_FOR_CD_AND_PXE, aTSPolicyObjectArray ), HRESULT=8009310b (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1205) TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Exiting TSMediaWizardControl::GetPolicy. TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
pWelcomePage->m_pTSMediaWizardControl->GetPolicy(), HRESULT=8009310b (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawelcomepage.cpp,303) TSPxe 2/18/2014 1:48:19 PM 836 (0x0344)
Setting wizard error: An error occurred while retrieving policy for this computer (0x8009310B). For more information, contact your system administrator or helpdesk operator. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
WelcomePage::OnWizardNext() TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Skipping Confirmation Page. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Skipping Task Sequence Selection Page. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Skipping Variables Selection Page. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Skipping Resolve Progress Page. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Activating Finish Page. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Initializing the countdown timer. TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Loading bitmap TSPxe 2/18/2014 1:48:19 PM 728 (0x02D8)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 2/18/2014 1:48:23 PM 780 (0x030C)
The command completed successfully. TSBootShell 2/18/2014 1:48:23 PM 780 (0x030C)
Successfully launched command shell. TSBootShell 2/18/2014 1:48:23 PM 780 (0x030C)
What I've done for troubleshooting tips so far.
Deleted the Machines I'm trying to image
Re-created all the Task sequences
Disabled PXE, rebooted the machine and after 45minutes enabled PXE again.
I've checked the certificates its all unblocked.
is there anything?Hopefully this other thread helps you:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/631086ac-3b59-4437-a6af-0f1a834edcc2/problems-with-pxe-booted-pe-environment?forum=configmgrosd
The marked answer in this thread is saying check the certificates? Would this be under Administration ->Security-> Certificates? I haven't tried re-installing the MP yet I'll give it a shot -
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...
Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
ShankarHI,
whats the message class, message number?
BR Christian -
Define Number Assignment for Goods Receipt/Issue Slips
Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore
Maybe you are looking for
-
How to disable GroupSpace once installed in 10.3.2
We recently created a domain using the wizard. Now that our domain is up and running, we want to disable groupspace as we don't plan to use it and don't want to incur the overhead. When our server starts up, we get an error "The DataSource appsGroupS
-
Help with moving contacts from iPhone 4s
Hello. I want to copy my contacts from my iphone 4s and add them to another phone - possibly an Android or new iPhone. Anyone know how to do this? Thanks in advance!
-
Hi Guys, I have been looking at the use of Cisco ACS server for VLAN assignment. So far I have searched through a number of threads and no found what I am looking for specifically so here it goes. 1) When the RADIUS attributes have been configured in
-
My Firefox v6.02 browser always open *.csv (comma delimited) file in another tab rather than downloading a file? I do not have right click option to save this file. My OP is windows XP sp2.
-
Photoshop CS4, licensing problem 148:3 PC Windows 7
Nach Windows-Update geht Photoshop CS4 nicht mehr. Es kommt eine Meldung mit Fehler Nr. 148:3, Ein Problem mit dem Programm, die Lizensierung funktioniert nicht mehr. Es wird ein Neustart empfohlen. Nach Neustart des PC bleibt die Meldung gleich. Die