J1I9 - not able to select excise group while confi. no range

Dear friends,
I have done CIN configuration in development.
all request are transported to quality.
But when i am going to assing number ranges in J1I9 , i am not getting allready configured Excise Group for seldction . ?? WHY??
Where i am wrong??
Regards,
Mahesh

hi
Check Note 805449 - Not able to maintain Number ranges for excise groups
In SE12 enter J_1INEXCGRP and click on F7
then select Utilities slect table contents and create entries in menu bar
enter the excis egroup here save it
then do SNRO

Similar Messages

Not able to select setup language while installing Crystal report2011.

Hi,
I am using windows 7 and trying to install Crystal report 2011 and SAP BusinessObjects 4.0 on my system. I have Java 7 update 51 version on my system.
I am unable to select setup language while installing Crystal Reports2011/SAP BO4.0. It does not show default language 'as English' over there.
It shows all fields with # sign like #Choosesetuplanguage# and other buttons also appears like this #Ok# and #cancel#. It does not show any language in drop-down, hence I am not able to select language from drop-down box. Drop-down box is blank.
When I click on #Ok# button it shows new message like #Validation failed#.
Please help.
Thanks.

mmmm. That is odd, must be something missing or permission problem.
Log out and log back in as the local PC Adminsitrator and do a repair install, may have to completely uninstall and re-install it again.
That messed up dialog text suggests you don't have something installed correctly or access denied error.
Look in the install log, should be in your \%user%\AppData\Local\Temp folder. See if it has any access denied errors.
But try instlaling under local PC Admin account first.
Don

Not able to change excise tyep while doing J1IIN for export

Hi
We are creating export excise invoice via J1IIN. But I am not able to change excise type to Bond Or Deemed as the pencil tab is grayed out.
Its by default coming to deemed as I have maintained the settings in u201Cdefault settings for excise gp and series gpu201D as
1000 20 11 1000 P1 S1u2026u2026u2026deemed.
We are using only one excise gp P1 and series gp S1. We have scenarios of export under bond and deemed export.
Please let me know what can be the problem. The strange thing is that it was working fine previously with these settings and we were able to change the excise type. But now it has grayed out. Also I am getting a meesage while J1IIN u201CNo add. Vendor / Customer data maint. for TMK911 -Please maintain J_1IMOVENDu201D
I have cheked the customer master and exice indicator is maintained as u201C1u201D in CIN tab.
Thanks

HI
For your Message says that maintain the Vendor Excise Details (J_1IMOCUST - Customer , J_1IMOVEND - Vendor)
Please check any vendor data is required to maintain
I am not sure check once if you assign any vendor in customer master , check those details in vendor excise (J1ID)
Regards,
Prasanna

In J1IJ we r not able to get excise invoice which was captured earlier

Dear experts,
while doing depot sales, In J1IJ we r not able to get excise invoice which was captured earlier through J1IG at depot.
please suggest me what are the possible causes for the same.
Regards,
Balu R.V

-Is your pricing procedure settings are maintained - Routine 356 / 365 ( need to be check) should be maintained in pricing procedure?
Routine: 356 to be assigned in Alt Caluculation type column of pricing procedure maintainance, which will pick the Excise invoice created at the time of MIGO @ Depot. ( it will read Table:J_1IRG23D)
Regards,
Reazuddin MD
Edited by: Reazuddin MD on Oct 25, 2010 11:16 AM

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right.

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

Not able to select value in MSC1N

Hello All,
I am trying to create the batch using MSC1N. I am not able to select the characteristics values for few characteristcs. I am using selected sets and code groups for those characterisctis. For others it is working properly. I am getting the error as "Value "Z033000 0010" cannot be selected
Message no. C1853
Diagnosis
From a value hierarchy, you want to choose a value that has subordinate values. This is not possible. You can only choose the lowest values in a value hierarchy.
Procedure
Explode the structure down to the lowest values and choose one of these.
Please guide me asap.
Regards,
Mayura

It sounds like you have multiple values available in the characteristic in your batch class. I'm guessing that the characteristics you are having problems with are set up differently than the ones you aren't having problems with.
It sounds like SAP thinks that because you selected code A, you can now pick from Codes X,Y,Z. But if you had selected code B, you can only pick from Codes L,M,N. The message is saying you have to pick directly from one of these lower subordinate codes. You can't select Code A as your choice because it's not an actual choic, ,only a pathway to let you pick from X,Y,Z.
I'm not sure exaclty how you have your charateristics set up but his sounds like it has variant configuration involved in it.
FF

Not able to select physicalschema directory for file data server in ODI 11g

Hi,
I am a beginner to ODI tech and stuck up with an error while doing a tutorial (mentioned in this link - http://st-curriculum.oracle.com/obe/fmw/odi/odi_11g/ODIproject_ff-to-ff/ODIproject_flatfile-to-flatfile.htm).
While creating a physical schema for default file server(FILE_GENERIC) , I am not able to select schema directories and the name field with value 'FILE_GENERIC.Directory' is grayed out (non editable)
I have gone through many documents but could not find any relevant information for this.
So could you please let me know if any configurations required for this?
Thanks,
Anusha

Hi Oleg,
Thanks for your reply.
While creation of physical schema , Name field is grayed out , is that the default behaviour of the screen? because in the tutorial I could see the name filead is pointing to a file directory path.
Thanks,
Anusha

Not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365

not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365?
Any idea?

after few days test in my lab, I can see that only email enabled group can be added as site collection admin using POWERSHELL.
hope this helps who stuck like me!! :-)

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

Not able to Create Product Group.

Hi All,
Not able to Create Product Group. I has to be solved urgently. The below message form SAP.
The field is defined as a required field; it does not contain an entry
Message no. MG144
Procedure
Transfer a suitable value.
If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
Note
For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) -> Locking Material Master Records.
Thanks in Advance,
Pherasath.

Hi,
Use thie below path for creating Product group.
Goto SPRO >Enterprise Controlling>Consolidation>Consolidation Functions>Automatic Posting>Elimination of IU Profit/Loss in Transferred Inventory>Define Product Groups
Regards,
JS

I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

Not able to select sales area for reference BP in CRM system

Hi All
I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
The field " Choose sale area is subpress/grey.
Please help me for the same.

Hi Kishore,
So you manage get into Sales Area Data, but when you
try to select Sales Organization you get nothing?
(click Sales Org combo but no selection appear)?
How about field Distribution Channel and Division?
I am afraid some of these fields still not properly
set/transported to CRM.
In R/3, this BP has maintained under same Sales Area
which mapped in CRM Org Model right ?
What is role in CRM when you open the BP?
Have you check if there is any error in middleware
when downloading BP data to CRM?
Cheers,
Gun.

Not able to select images in iphoto 8????

Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
Please help
Thank you in advance

THe basic answer is to export them to a desktop folder and access them form there
for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
Larry Nebel

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

Use File/Import/Movie and navigate to the file.

J1I9 - not able to select excise group while confi. no range

Similar Messages

Maybe you are looking for