J1IEX Vendor's Excise Invoice
Dear All
User enter GR and capture excise invoice and also enter J1IEX. But the status of J1IEX is in process. Now user cancelled the reference material document, therefore the system neither post the excise invoice nor cancel it. If this excise invoice is left as it is and post the new one what will be the impact on financial side or pl provide the solution.
Hi,
First cancel the GR Document in MIGO and then go to J1IEX and selection option as Cancel > Vendor Excise Invoice.
As a result of this, you can use the same Vendor Excise Invoice No again during creation of new GR and also RG23 A Part I entries will get reversed.
There won't be ant FI effects during this process.
Similar Messages
-
Hi
My requirement is to print vendor return excise invoice with t-code J1IV. I have nace configuration application type V1, output type JEXC, I have two processing rountines 1st processing routine contain program name 'J_1IEXCP_OUTPUT', form routine 'ENTRY', form 'J_1I_EXC_INVOICE' and the 2nd processing routine contain program name 'J_1IEIOT', form routine 'ENTRY', form 'J_1I_EXC_INVOICE'. The 1st processing routine program is written for SD Excise Invoice and the form is script. The 2nd one is useful for me I made a copy of program 'J_1IEIOT' and instead of using script I want to use custom smartform. I have a designed layout . I made a change in NACE configuration in 1st processing routine instead of standard program name 'J_1IEXCP_OUTPUT', I have assigned my custom program name 'YMMVendor_Return', done no changes in form routine 'Entry' kept as it is and deleted the form 'J_1I_EXC_INVOICE' and in PDF/Smartform form I assigned custom smartform 'YMMVendor_Return' designed by me. I am looking for form entry subroutine in this standard 'J_1IEIOT' to put a break-point and check is it calling that program from J1IV but there is no form entry subroutine in 'J_1IEIOT'.
Can anyone please suggest how to resolve it...
Best Regards
IndraExcise is captured at diffrent stage and vat at diffrent stage
U need to creat Returnes PO (note returns PO should have tax code of bed ecc and hecc and vat
do GR MIGO
J1IS hear only Excise partwill be returned and ther is no chance to reverce ur vat or cst
then u need to pass credit memo MIRO agaist returns PO at this stage ur vat amount will be revirsed.
Very imp , In PO ur excise value should be same as u are going to reverse in J1IS.
as there is no relation between J1IS and MIRO (in returns PO excise value in J1IS dont flow in MIRO credit note)
As in purchase there is link between GR excise amount and MIRO. hear excise value captured in J1IEX flowes in MIRO
so be care full while creating PO.
hope this helps -
Maintain Vendor for excise Invoice in STO
Hi Friends
I am doing GR against Stock transport Order and getting error as Maintain vendor for excise Invoice
I created vendor master for plant then i maintained additional purchasing data in purchasing view there i did settings as follows
Purchasing View --> Extra --> Add purchasing data --> Selected data retention at plant level
Purchasing view --> Alternative Data --> Selected purchasing here i maintained supplying plant code
Same procedure i did for receiving plant also.
After that i maintained vendor master recored excise details in J1id
Still i am getting same error
Please give your valuable inputs
Regards
Vivek
Edited by: Supergene on Jul 24, 2008 1:01 PMHi,
Its not necessary to selected data retention at plant level.
Have you assigned Excise Indicator (For e.g. "1") to the Vendor Master, also maintain the ECC No, Excise Reg, Division, Commissionarate, LST, CST, etc....
Then it will work for new transactions. (For old, I think it will not work) -
In STO process, am getting error in GR"Maintain vendor for Excise invoice "
Hello
In STO process(MM route) I have prepared excise invoice by J1IS. While preparation of J1IS i have enterd customer(recieving plant as customer).I have also mainatin the the supplying plant as vendor in J1ID. But when i am trying to capture the excise invoice at recieving plant during GR am getting error "Maintain vendor for Excise invoice "
Kindly suggest
Regards
Manishdear sir
please check in customer master record , in control Data tab, vendor master assigned .
if not assigned the vendor master in customer master.
regards
jrp -
Vendor return Excise Invoice through J1IS in foreign currency
Hello Experts.
Scenario is like:
We have two group company which are 100% EOU . and we have inter company process.
Plant A used to invoice to Plant B in Foreign current e.g. in EUR.
In case of any rejection, Plant B need to raise return Excise invoice through J1IS.. but the problem is that , In J1IS we can raise invoice in INR only. But the requirement is like Plant B also need to raise Excise invoice in same currency i.e EUR.
Is there any method or process through which we can raise return excise invoice in Foreign currency.
AshwaniHi Amit:
As we have two EOU unit . one EOU unit use to sale material to another unit as export sale. and do billing in EUR.
Suppose i have to return few material back to first EOU unit, than vendor return Excise invoice should be in EUR as it was billed to me in EUR.
Ashwani -
Vendor Return Excise Invoice Report- J1IS and J1IV
Hello
What is the std report of Vendor Return Excise Invoice (j1is and J1iv)
Or
Which table can be using for making the Query.
Regards
Niti NarayanDear Friend,
You can use j1i7 report in that you will get all internally generated excise invoices
Regards
Pramod -
Vendor Return Excise Invoice + VAT
Hi All,
We are make Vendor Return Excise Invoice wrt J1IS and Credit note by MIRO,
But we want one consolidated print with Excise +Vat, How the same can be done
Regards
Niti NarayanCheck this answered links
Vendor Return Excise Invoice printing
Vendor invoice print -
Vendor return excise invoice cancellation
Dear all,
How to cancel vendor return excise invoice, which has been created using J1IS/J1IV T-code.
When I try to cancel the excise invoice for vedor return in t- code J1IH, system is giving the below error
Excise modvat accounts not defined for CEIV transaction and excise group
Message no. 8I402
Note: When we try to cancel customer excise invoice system is not throwing the above error.
from configuration point of view, i have done the all the possible config. but still system is throwing the following above error.
1.Config. for CIEV:(ETT-Excise grp--CC)
CEIV ::::::::::::::: CR Credit :::::MSUSP CENVAT suspense account
CEIV ::::::::::::::: DR Debit :::::PLAAED PLA AED account
CEIV ::::::::::::::: DR Debit :::::PLAAT1 PLA AT1 Account
CEIV ::::::::::::::: DR Debit :::::PLABED PLA BED account
CEIV ::::::::::::::: DR Debit :::::PLASED PLA SED account
CEIV ::::::::::::::: DR Debit :::::RG23AED RG 23 AED account
CEIV ::::::::::::::: DR Debit :::::RG23AT1 RG 23 AT1 Account
CEIV ::::::::::::::: DR Debit :::::RG23BED RG 23 BED account
CEIV ::::::::::::::: DR Debit :::::RG23ECS RG 23 ECS Account
CEIV ::::::::::::::: DR Debit :::::RG23SED RG 23 SED account
2. G/L Account determination configuration for the same has been done.
Please guide me, how to resolve this error.
note: I tried to cancel the vendor return excise invoice using J1IS--> Cancel excise invoice but system is not able to generate any document.
please help me.
manoj singhIf the system is throwing the error as i menstioned, follow the procedure to resolve the issue.
1. Check the Excise account determination is configured properly.
2. insure the Vendor return Excise doc. to be cancel.
3. Use the J1IH wrt to Official Excise Document Number instead of internal doc. no. to cancel the J1IS/J1IV transaction.
hope it helps.
manoj singh -
Against which vendor the excise invoice passed by dealer
Scenario:Vendor A is supplying me the raw material which he has purchased from vendor B ,So the excise invoice Vendor A has paid to Vinst vendor B as he cannot avail the cenvat on them so he passes it to me.
Now my question is Excise invoice given by vendor A has been issued by Vendor B so when i record this excise invoice in my register ..so should it be recorded against ivendor A or Vendor B.
If vendor B should be against whom my excise register should have entry than ..how to do the same?Dear Prabhjot,
Thnaks for your reply ..I understand that if VEndor B excise invoice has been passed by vendor A than Excise register needs to be updated with Vendor B.
But in 1IEXwhile u capture and post excise invoice system will show the vendor A but in miscellaneous tab u have field call ship-from
in this ship-from we put vendor code as B manually looking at vendor invoice
this is only way to capture vendor provinding excise invoice other than po vendor as i belive but in excise register i still get the vendor A as excise invoice provider.
Kindly let me know how to get vendor B in my excise register.
Regards
Amit -
Error : Maintain Vendor for Excise Invoice
Dear Friends,
I'm getting the below error while Good Receipt for STO(intra company through MM route).
Error: Maintain vendor for Excise Invoice
Message ID: 4F185
Process overview:
1. STO created in receiving plant
2. Material issue through MB1B from supplying plant.
3. Excise invoice created with ref. to Good issue doc. through J1IS in supplying plant.
4. While GR in receiving plant we are facing this issue.
Pleasse help me to resolve this issue.
Thanks,
VenkatHello
For STO , you have to maintain both the issuing plant and the supplying plant as both vendor and customer.And at the time of vendor creation, enter the customer number for that vendor in the vendor master record.And also maintain the vendor CIN details at the time of VMR creation and in J1ID.
Hope this helps
Regards
Gregory Mathews -
Maintain vendor for excise invoice -STO process??
Hi,
Still facing problem in Same issue so...
I am doing Stock transfer from plant to plant in same company code.
i have maintain all the information in the Excise TAB of migo but still face the following errors.
Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant not for vendor .
So what might be the problem and how to locate it , trouble shoot the same .???
Thanks in advance
SAP-MMhi
check following
goto Xk02
give ur vendor ( plant assigned to)
then goto PURCHASING TAB
here in menu EXTRAS>ADD URCHASING DATA
here u can find field for plant
just check and revert back
regards
kunal -
Vendor Return Excise Invoice- VAT/CST
Dear All,
I want to return the material to vendor after invoice verification and before payment.
So entered the credit memo, Return material 122 mov type, Create Excise Invoice.
Now in my Excise Invoice print format i want CST and VAT to be printed.
Now my query is i want the table from which i can fetch the CST or VAT amount which i posted in credit memo.
Regards.......
Edited by: akshay sonurkar on May 19, 2010 11:15 AMThanks Umakant,
I have solved the queries. The solution is:
If Invoice
RBKP-XRECH - X
RSEG u2013TBTKZ - blank
If Credit Memo
RBKP-XRECH - blank
RSEG u2013TBTKZ - blank
If Subsequent Debit
RBKP-XRECH - X
RSEG u2013TBTKZ - X
If Subsequent Credit
RBKP-XRECH - Blank
RSEG u2013TBTKZ u2013 X.
Regards
Akshay
Edited by: akshay sonurkar on May 21, 2010 7:28 AM -
Vendor Return Excise Invoice printing
All SAP Gurus,
We have created an Excise invoice for vendor return (J1IS).
Now we are using J1IV for printing Excise invoice, but we are not getting the print in desired format.
We want to use the print format same as that being used by SD people.
Is there any thing I need to do in NACE for this?
Regards,Hi
You can use format used for SD but logic in getting the information in the output is quite different in the case of vendor returns.
because here we have vendor instead of customer in case of SD, and the quantities, price are all to be taken from material document, tables etc
regards
prasad -
Vendor Return Excise Invoice Problem
Hi All,
I have captured/posted excise invoice of 'Consumable' material type .
When i am doing return delivery part 1 posting is going to RG23C1 register but Part 2 posting is going to RG23A2 .
Why this is happening?
Please guide uDear Shubham,
Please dont give useless answer as there is no setting againast movement type related to part1 & 2. We have to assign only the RG23C against the movement type.
As i have mentioned that while return delivery RG23 C PART 1 register is updated properly.
But when i am posting it in J1IS transaction ,RG23 A PART2 is updated instead of RG23 C PART 2
Please provide the solution -
Vendor Rejection :- Excise Invoice
Dear All,
We do return delivery only part 1 entry against original GRIN document & Once return delivery takes place, we does excise invoice in J1IS where part 2 entry gets invalved.
Now the issue is that after creation of excise invoice for rejcted material, our stores person cancle the return delivery casue prod. person says they can use the rejected material by doing some rework.
I want that system should not allow stores person to cancle the return delivery document once the excise invoice is prepared against it.
How can i get this. Please help me
Thanks in advance.it can de done trough abap work. or dnt give authorisation to reverse for that user.
Maybe you are looking for
-
How do I make a typography image in illustrator?
How do I make an image like the one below in illustrator? I want to do this with my logo and small font. I am new to illustrator but i am okay with the basics. Thank you for your time.
-
Form Creation in Acrobat X Pro - unable to save as Reader Extended PDF
I am using Acrobat X Pro on the Windows 7 OS. I have created a document in Word (Office 2010), saved it as a PDF and added form fields. When I try to Save As Reader Extended PDF, the options are grayed out. How do I create a form from a Word document
-
Bridge CS6 is resizing in raw to 240ppi
If I open a scanned film .tif image in raw, it is being resized and then that size is applied to the image file. Original image: 2400ppi, 1.4 x 0.9", 3341 x 2236 px, 21.38 mb open in Camera Raw and make no changes open to Photoshop CS6 & now the imag
-
Learning Java proxies - landscape question
Hi guys, I could use a little help to learn Java Proxies, I'm just starting to get familiar with Java, I'm coming from the ABAP side. First and foremost what do I need from the system point view? We have an XI box and using file/FTP/IDoc adapters and
-
How do I get some action over my connection speed
I recently joined the infinity club. The checker for my line says expected Download speed 19.6, upload 5. I have not got anywhere near that speed. Yesterday I noted BT Openreach on our street at my meighbours. After they left I spoke with my neighbo