J1IH t.code selecting OTHER ADJ. error occurs

HI,
      in J1IH transaction when i am doing other adjustments it is giving the following error.
           Excise JV 1000001138 acctng. no. 4302452 with Part2 Sl. 0000000000 has been successfully created
    normally it has to show the current serial number but it is showing all zeros.
    and one more thing in the number range status it is showing the current number correctly .
   please give the solution, early answer is highly rewarded
                                          thanks in advance

Hi Sai,
Can you please tell me where did you get the current serial number.
Also please check whether the current number is in the new fiscal year.
Regards
Navin.

Similar Messages

I have been working on a file in pages which I cannot open now. Every time I select it "an error occurred and pages must close" appears. Files sharing in itunes doesn't work either. Any suggestions?? THANK YOU

I have been working on a file in pages which I cannot open now. Every time I select it "an error occurred and pages must close" appears and pages shuts down. I have tried to duplicate the document but cannot open the copy either. I am unable to email, share via iwork, itunes, idisk or WebDAV all of these options just close pages down. Does anyone have any ideas......Thank you

And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
Let's summarise, for those reviewing this threadless thread for app support..
Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names."

Reason Code:23 Reason: An error occurred during the Network Policy Server use of the Extensible Authentication Protocol EAP

I get the above described error when trying to connect to NPS 2012 with a Windows XP machine
I successfully connecting to that server with an Android phone.
I started examining the problem and saw the following:
1. The android phone uses some cipher suites that are not supported in Windows XP and the one that theserver selects in the Server Hello message is Cipher Suite: TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA 0xc014
2. With the WINXP the selected cipher suite is Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA 0x0035 and it fails with the above error.
3. Next step I did was to restrict the NPS to use only the Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA 0x0035 and not to my surprise the Android phone could not connect and I was getting the same error as with the WINXP.
Any solution to this prpoblem?

Hi and thanks for replying
I do not believe there is a problem with the certificate as it uses the same certificate in both authentication processes - the failed one using the TLS_RSA_WITH_AES_256_CBC_SHA
cipher suit and the successfull one using TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
cipher suit - so I believe the reason lies elsewhere.
Please check it and try to produce a solution for it.
Thanks

Installing XI 3.0 on Solaris - install error occurs

WAS 640 oracle successfully installed, then I start the XI install and right at the begining I get the following error:
WARNING 2004-11-02 13:06:50
Execution of the command "/usr/bin/java '-classpath' '/tmp/sapinst_exe.29773.109
9418777/JAR/ins-j2ee.jar' '-d64' 'com.sap.ins.j2ee.GetDataModel'" finished with
return code 1. Output:
Error occurred during initialization of VM
java.lang.NoSuchMethodError: java.lang.Class.getName0()Ljava/lang/String;
WARNING 2004-11-02 13:06:50
Could not determine a valid JAVA_HOME directory from the environment.
Transaction begin ********************************************************
ERROR 2004-11-02 13:06:50
FKD-00037 Query did not return a result.
ERROR 2004-11-02 13:06:50
FKD-00038 Query did not return a result.Select attribute SID, statement: WHERE
ROWNUM = 0
Transaction end **********************************************************
Thanks
John

Hi John,
1) Check environment of your OS user (root?) by command env and find JAVA_HOME
2) Add/modify the path
JAVA_HOME=<blahblah>
export JAVA_HOME
Jiri

An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.

Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

Error in data loads-Error occured in the data seletion

Hi,
We have to do an init load for Period 10 from data source 0EC_PCA_3.
When the period changes we usually copy the previous infopack and change the fiscal yesr period and do an init load.
This time we have to change the fiscal period to 010, we created a new info pack but the fiscal year period we forgot to change and was 009 and scheduled a init load.
The load failed with error mesg IN EXTRACTION PART:
1) syntax error in RSCDELTA
2) Error occured in the data selection -RSM 340
REQUEST part in monitor screen is green.
TRANSFER part in monitor screen is green
EXTRACTION shows:
Data request received ---green
Data selection scheduled -
green
Error occurred in the data selection -
RED
Processing (data packet): No data ---RED
We deleted the red request in the ods , deleted the init load in scheduled -init for source system --- chnaged the fiscal yesr period to 010 and triggered a new load but again it gives the same error mesg.
How to rectify this and do loads to the target successfully.
Please suggest

Please check the job log in the source system. It will give you the exact reason why extraction is failing. You need to act accordingly.
Thanks..
Shambhu

The operation can't be completed because an unexpected error occurred (error code -50)

I have a Seagate Central 3tb NAS (latest firmware) attached to my wireless router (Netgear wndr3400v3). I have a late 2011 macbook pro with Yosemite on it. When I go through finder to use my NAS I keep getting "The operation can’t be completed because an unexpected error occurred (error code -50)" . I only get it when I am trying to copy a big folder with other folders and files with in. I can copy a single file or create folders. If i try to copy a folder with 100 pics in it then I get the error. I can create the folder on the NAS and select all 100 files. When I drag them to the NAS, then they copy with no problems. Every so often my time machine has an error and says that it has to create a new backup. I read some where to make sure that "put hard disk to sleep when possible" should be selected in the energy saver in preferences. Still no luck. A can also drag any file from the NAS back to my laptop or view them from the NAS with no problems.
Thanks for any help in advance.
Billy

Hi there,
Well I have exactly the same problem! Recently I reset my WD My book White light (2 x 1TB RAID disk), due to the fact that the disk ran full because of TimeMachine.
I reset the disk, and now I can only write some files to it, but most give this error code.
I wrote to WD, but they could not give an answer.
Q: did you update the firmware? Maybe that is causing the problem, in that it is maybe not consistant in the filesystem?

Error occurred during initialization of VM Could not reserve enoughspace for code cache

I receive this error in the ZENWSimport and Removal screen:
Error occurred during initialization of VM
Could not reserve enough space for code cache
Server is a HP DL380G4, NWSBS SP5, 4 GB RAM.
I think it's Java related, because iManager also stopped working (error
503 - service unavailable)
AUTOEXEC.BAT:
@echo off
prompt $p$g
path=c:\dos
rem mscdex /d:cpqcdrom /v /m:50 /l:f
c:\dos\nlsfunc
c:\dos\mode con cp PREPARE=((437) c:\dos\EGA.cpi)
c:\dos\mode con cp Select=437
cd \NWSERVER
## commented by MemCalc server -nl -u134217728
server -nl -u134217728
I tried removing the -u switch, but the server wouldn't even boot then.
I'm out of options, can anyone help?
Arjan Schepers

Also, I reapplied Service Pack 5, didn't help. BTI.CFG looks like the
following:
;* Copyright 1982-2001 Pervasive Software Inc. All Rights Reserved
;* Pervasive Software product initialization file for NetWare
[Btrieve Communications Manager]
MaxWorkerThreads=16
MaxReceivePacketSize=1500
Supported Protocols=TCPIP
Listen IP Address=
TCP/IP Multihomed=YES
Enable AutoReconnect=NO
AutoReconnect Timeout=180
[MicroKernel]
CacheSize=2048000
Pervasive SQL 9SP2 is installed on this server for an application named
MICROS RAS/KAS. It needs 2GB memory (*shrug*, I know), hence the 4GB memory.
Arjan Schepers

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

An unexpected error occurred (error code -8076)

Can't find this anywhere in Google
I tried to set permissions to my drive "Apply to enclosed items..."
I get this error:
An unexpected error occurred (error code -8076)

Select the volume icon in the Finder and open the Info window. Click the padlock icon in the lower right corner of the window and enter your administrator password when prompted. Uncheck the box at the bottom marked
Ignore ownership on this volume
Close the Info window.

Unexpected error occurred (error code -43)

I'm trying to setup a Network/Library folder but I'm getting this error:
"unexpected error occurred (error code -43)" when I try to access the folder via the Network/Library folder on the clients.
Any ideas what causes this error??

What a pain, I found a remedy.
Take the time to read this:
http://www.macworld.com/article/4228...disasters.html
When you get to the point to choosing your startup disk, choose the icon from Disk1. DON'T REINSTALL THE OS X! Just select from menu at the TOP of the screen Utilities--->Disk Utility.
Select "repair disk" let it run.
When done chose "Startup Disk" from the same menu above.
Restart your computer.
Hope that helped.

An error occurred while applying your dashboard selections for this page???

Hi there,
I'm getting this error on the dashboard page.
"An error occurred while applying your dashboard selections for this page" Error Codes: GV3MWW29
It is removed when I click "Clear my selection" from page option.
Is there any other way to remove the error without clicking "Clear My selction" everytime.
Thanks

Have you saved your selections by selecting 'Saved Current Selections'? When do you get this error?
There are a few posts in this forum; here's one that may or may not help; take a look if you haven't already..
GV3MWW29 error
Thanks!

Process chains-Error occurred in the data selection-DBIF_RSQL_TABLE_UNKNOWN

Hi All,
The problem occurred in PC which was running smooth until now
Now I am getting message:
in BI : Error occurred in the data selection
When I went in R/3 it shows DBIF_RSQL_TABLE_UNKNOWN
Probably the only way to eliminate the error is to correct the program.
Please check the entries in the system log (Transaction SM21).
Internal call code.........: "[RSQL/READ/PA0009 ]"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
DBIF_RSQL_TABLE_UNKN
SAPLXRSA" or "ZXRSAU
EXIT_SAPLRSAP_002"
Can anyone explain..

Hi ,
Check note 950317.
also check the blow forum having same kind of discussion :
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
Short dump error DBIF_RSQL_TABLE_UNKNOWN
DBIF_RSQL_TABLE_UNKNOWN
thanks,
Deepak

Finder An unexpected error occurred (error code -6584).

I get many errors from my Retina 15" macbook pro
POP3 account is not displaying messages
safary frozen and tryin to connect to 201.122.36.151
Finder unexpected error occurred (error code -6584)
Time machine error sparse bundle arlready in use

First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

Error occurred error code is -180

Adobe CC: When installing .zxp extension in manager for Dreamweaver, I am getting "error occurred error code is -180". Cannot find out what this is? Running Windows 7. Help...PBGVone

Since I just started using CC with extenion manager & Dreamweaver, it is version 7.1.1.32. For some mysterious reason, all the extension appeared; including the ones I was getting errors on. One problem down, next
Taking site created in CS5 Dreamweaver where I use a number of INCLUDES, the includes are not working. FYI...files from CS5 work without issue on hosting server. To solve, I installed AdobeExchange 1.2.0 so I could get my INCLUDES SSI oprion back in CC. Although I see Adobe Exchange in Dreamwever CC, when selected nothing happens; removed; re-installed; same thing. Went directly to Dreamweaver Exchange found "Insert Server Side Include" Veeres 1.0.0; see it in Insert; no luck; still does not recognize. Includes code that worked CS5 is:

Any thoughts? v

J1IH t.code selecting OTHER ADJ. error occurs

Similar Messages

Maybe you are looking for