J1iin is utilizing immediatly required is monthly utilization

Dear SAP Guru's
Please help me I am unable to do the monthly utilization by J2iun for local excise invoice.
1) The series is maintained for no immediate utilization( check is un ticked) for immediate utilization for local excise.
2) for Export excise invoice it is working correctly as immediate utilization check is enabled.
3) For local excise utilization even though the settings are there for monthly or fortnightly utilization even then it is utilizing immediately in J1iin
Please help to resolve this.
Regards
Umesh

1.Utilization Problem:
J2IU has to be used for monthly utilization . You will have to  utilize Excise duty liability Excise duty wise by providing all the dispatch plants in the selection screen.
In the second screen of the j2i5 you will get all the credit balances accumulated in the respective excise group, utilize all the payable duty from accumulated credit shown in the screen.
Part2 entry will be created once you simulate & save.
2. Import material return:
If you material is returned to vendor then no need to reverse the credit.
Raise an OTHR invoice through J1IS providing the correct duty break-up.
Regards,
Akhileshwar K

Similar Messages

  • Monthly utilization error in J2iun

    Dear SAP Guru's
    Please help me I am unable to do the monthly utilization by J2iun for local excise invoice.
    1) The series is maintained for no immediate utilization( check is un ticked) for immediate utilization for local excise.
    2) for Export excise invoice it is working correctly as immediate utilization check is enabled.
    3) For local excise utilization even though the settings are there for monthly or fortnightly utilization even then it is utilizing immediately in J1iin
    Please help to resolve this.
    Regards
    Umesh

    Just a brief description:
    J2IUN for the month of March(FY-2009). following points are checked in my system.
    1. PLA account Balances are posted using T.code J1IH through TR6 Challan for March Month(FY-2009).
    2. PLA Balances Extracted in J2I5 and print in J2I6(FY-2009).
    3. PLA Balances are updated in Table j_1ipart2 automatically when we do 1 and 2 points.
    These above things has been done, but PLA account Balances (Even PLA accounts description) is not displaying in Utilization.
    Note: Up to Feb Month Utilization done properly even PLA accounts also displaying so we utilized.

  • Error in J2IUN - Monthly Utilization

    Dear Experts
    I'm running monthly utilization using T code J2IUN. Here the PLA account is not populating for BED duty. but all the carry forward and account balances are available.
    Kindly Guide me through this problem.
    Regards
    JK

    Just a brief description:
    J2IUN for the month of March(FY-2009). following points are checked in my system.
    1. PLA account Balances are posted using T.code J1IH through TR6 Challan for March Month(FY-2009).
    2. PLA Balances Extracted in J2I5 and print in J2I6(FY-2009).
    3. PLA Balances are updated in Table j_1ipart2 automatically when we do 1 and 2 points.
    These above things has been done, but PLA account Balances (Even PLA accounts description) is not displaying in Utilization.
    Note: Up to Feb Month Utilization done properly even PLA accounts also displaying so we utilized.

  • Immediate Requirement of Discoverer 4i

    We have an immediate requirement for Oracle ERP Expertise:
    Prior experience in developing Discoverer workbooks using Discoverer 4i based on Oracle's Enterprise Data Warehouse 3.1 in the area of Supply Chain Intelligence. expert in Supply Chain Intelligence reporting experience in developing Workbooks in the area of Data Warehouse reporting (preferably Supply Chain).
    Qualification : Graduate or PG Engrs / MCA / MCM from Reputed organisations.
    Location : Mumbai OR Bangalore and Asia Pacific
    Experience : Min. 3 yrs to 8 yrs
    Resume to be mailed at: [email protected]

    You can configure the port that the Plus applet will communicate thru the firewall using the GateKeeper configuration tool ("gkconfig"). There's a chapter on firewall support in the Discoverer 4i Configuration Guide that should be helpful.
    BTW, it should be (by default) communicating over port 15000.
    null

  • Monthly Utilization J2IUN with Service Tax

    Hi Mentors
    I have one query. While doing the monthly utilization with service tax option my balance not tallying with my utilization amount & my ledger account.
    Before I did all the utilization with cenvat clearing a/c. why it is not matching my balance
    thanks in advance.
    Regards
    Laxman

    Sandeep
    My payables like BED & CESS i want to adjust against the service tax. so i no need to maintain balance in service tax account.
    if i adjust amount against service tax system not allowing
    Laxman

  • A newer version of AirPort Utility is required

    Hi everyone,
    My Airport Utility keeps telling me that "A newer version of AirPort Utility is required."
    My airport extreme is a (new) dual band unit (running v7.5) and the AirPort utility (v5.4.2) seems to be the latest and greatest.
    What am I doing wrong?

    You need to install the new software from the disk that came with the Airport Extreme.
    This is only available on the disk at this time as Apple has not released the new version for download.
    The new version of Airport Utility is 5.5 which is on the disk that came with the new Airport Extreme.

  • Negative Balance in J2IUn - Monthly utilization

    Dear SDNs,
    I am running Transaction J2IUn for April 2009 (Monthly Utilization).
    I am getting Three Account Names
    1. RG23ABED
    2. RG23CBED
    3. PLABED
    Here I am getting Negative value in Available Balance and Rem Balance for RG23ABED and PLABED.
    Any inputs..?
    Thanks in Advance...
    Regards,
    HP

    Hi,
    Check from MM end, whether the amounts are updated while excise capture and post is done.
    Regards,
    Sai

  • Error in Excise Monthly utilization (J2iUN)

    Dear All,
    While executing T-code J2iUN (monthly utilization)  system gives the error message :-
    Customization for excise group S1 is missing in table Excise group
    Message no. 8I303
    Diagnosis
    The customization details have not been maintained for this company
    Procedure
    Please use the localization IMG or Global settings
    to maintain the company settings
    Kindly provide solution.
    Best Regards,
    Satheesh K

    Hello ,
    J2IUN input parameter's are wrong. Check mentioned customization for excise group and Plant settings.
    SPRO > Logistics General > Tax on goods movements > India > Basic settings > Maintain excise group where you can able to check plant vs excise group assignment.
    Regards
    Mani Kumar

  • Monthly utilization-J2IUN

    Hi Experts,
    While i am trying to post the monthly utilization in J2IUN ,i am getting below error.
    FI/CO interface: Update call without successful check
    Error message NO-RW100.
    Please help me on it.
    Regards,
    Sumeya offrin

    Dear,
    This is one of the very common issue, from error message you can not judge that what is the error, please follow below process to know the exact root cause of error:
    1. In J2IUN enter all details and switch on the debugging
    2. Execute the screen, it will open in Debugging mode
    3. Put Break point at Function Module "Messages_COunt"
    4. Press F8, system will stop at one point, now press F6 and search for field XMSEG, this is the internal table which stores the error message, for the first time this will be blank, you need to press F6 till the time your cursor reaches second time, once it reaches the second time, you will see some value, this will be exact error message
    The possibilities are
    Business Area error, Profit Center Error, Profit Center not activated etc.
    Please try and let me know if you face any issues.
    Br,Vivek

  • Monthly Utilization

    Hi Gurus
    During monthly utilization following error occurs. Also in J2I6 (RG23A Part II), u2018Opening Balanceu2019 amount differs than actual balances since Nov.2011 as shown below:
    Oct.2011  Cl. Bal.       
    75550535     1542515     768840.8     23314928
    Nov. 2011  Op. Bal.
    9073764     185925.1     90715.47     1937327
    In T CODE J2IUN Monthly Utilization
    for an excice invoice i get a dump for ABAP run time error.
    Kindly suggest

    the issue was due to negative balance.Cenvat G/L balances to be carry forwarded.Issue resolved.

  • Very urgent-Monthly utilization problem

    Hi All
    I m having problem when i am trying to do monthly utilization
    When i am executing T-Code J2IUN ,I have selected the plant and excise gruop
    After that it is displaying
    RG23ABED
    RG23CBED
    RG23ASED
    RG23CSED
    Correctly that is it is showing all positive amount
    But PLABED it is showing Negative amount
    We have checked with the abaper ,he told us that it is taking current fiscal year amount and previous yr i.e 2007-2008 it is not taking
    What can be the possible solution
    Awaiting for quick response
    Point will be duly awarded for the answers
    regds
    sahilesh

    Dear Shailesh,
    The Balance which is shown in J2IUN transaction is for all the business areas for a particular companycode. When you are doing a utilization for a particular excise group & for a particular period (say Today) then system will show the PLA balance for all the business area in J2IUN for the fiscal year 2008 if your fiscal year variant is fro April-March.  So check the G/L balances of the duties which are shown correctly as well as the PLA G/L balance & also check your PLA G/L account assignment in
    SPRO/Logistics general/Tax on goods movements/Account determination
    Thanks & Regards,
    SAP FC

  • 5.4.2 of utility: "A newer version of AirPort Utility is required."

    The Airport Utility for osx 5.4.2 pops up this warning when I try to configure the base station.
    "A newer version of AirPort Utility is required.
    This version of AirPort Utility doesn't support this Apple wireless device and might improperly configure the device if you continue to use it. Use the version of AirPort Utility that came on the CD with your Apple wireless device. Check www.apple.com/support/airport for the latest version of AirPort Utility."
    Maybe I'm tripping but I believe 5.4.2 is the latest version?

    +So what do we do when someone has the newest Time Capsule (late 2009) but cannot find the install disc?+
    You would need to call Apple customer support. Apple has not posted AirPort Utility 5.5 for download because...according to a "genius" at the Apple store....Version 5.5 is not fully compatible with earlier versions of the AirPort Extreme, Time Capsule and AirPort Express.

  • Monthly utilization of Cenvat problem

    Hi ALL
    While doing utilization for for the month of JAN the key user has maintained todays date i.e.04.05.2008.and done the utilization.i.eJ2iun.
    As it has posted in todays date it has done utilization till today.
    Now I Reversed the document and want to do the same in 01.01.2008 to 31.01.2008
    how we can do this?Plz guide.Consider this is very urgent Pls its very urgent.

    Hi,
    We are also facing same problem 2 weeks back,I found out that not sufficient Balance in RG23A BED account that's why system took Corresponding PLA account,This message is also confirmed from SAP also.
    And aslo maintain Proper Debit and Credit entry of MRDY t.type.
    Raghu

  • Utility for determining the month of the date

    Hi All,
    I am currently using the Date object to get the date in numbers and then by using a switch case, am manually printing the month in words.
    Is there any utility/method which gives us the month text like August, September, etc., instead of 8 and 9?
    Please give me some pointers on the same.
    Thanks,
    Anitha

    Hey!
    Yeah, there is an easy way to achieve this!
    You can create prototype for Date function like this:
    Date.prototype.dayName = function() {
        var myDay = ['Sunday','Monday','Tuesday','Wednesday','Thursday','Friday','Saturday'];
        return myDay[this.getDay()];
    Date.prototype.monthName = function() {
        var myMonth = ['January','February','March','April','May','June','July','August','September','October','November','December'];
        return myMonth[this.getMonth()];
    And you are using it like this:
    var myToday = new Date;
    alert((myToday.dayName() + ', ' + myToday.getDate() + ' ' + myToday.monthName() + ', ' + myToday.getFullYear()));
    Hope it helps!
    tomaxxi
    http://indisnip.wordpress.com/

  • Monthly utilization issue

    Hi,
    We have initially upload the payable Excise duty values (Rs. 99,514.00)
    in 16406010 EXCISE DUTY PAYABLE G/Ls.When we are trying to utilize
    the amount through the transaction J2IUN,this initial upload payable
    Excise duty value is not getting highlighted in the payable tab.
    Kindly guide how to achieve it?
    Regards
    Somnath

    Hi,
    In j_2iaccbal..there is no provision to upload balances for excise payable.Only the credit values or RG23A ,C and PLA is there..
    Regards
    Somnath

Maybe you are looking for

  • Invalid redemption code - can't get my serial number for Adobe Acrobate XI Standard

    I keep receiving a message, "The code you entered in invalid." for my redemption code.  I used the number one and the small l and a zero and a capital O in my redeption number and still get the same message.  How do I get the serial number so that I

  • Premiere element move from 32 to 64 bit

    Hello All- I am going directly from PE9 to PE13. PE9 was only available in 32 bit, and of course I want to install the 64 bit version of PE13 on my Windows 7 machine. Q: Is the 64 bit version a totally separate installation from the 32 bit, or do I n

  • Management to VRF Interface on 1841 relying on default route

    I couldn't find this in any of the bug lists, has anyone come across this scenario before: I have an 1841 router, running: c1841-advipservicesk9-mz.124-25f This router has multiple loopbacks in different VRFs, loopback 0 is in the global context, loo

  • Why the request.getInputStream() return nothing?

    I use this code to display the request content : <%    java.util.Enumeration headerNames = request.getHeaderNames();    while(headerNames.hasMoreElements()) {      out.println(request.getHeader((String)headerNames.nextElement()) + "<br/>");    int co

  • How can we use Metadata Integrater

    Hi, Using with meta data Integrater we can browse from any where what are the steps to using this meta data Integrater. is there any docs for that can u pls send.