J1INCERT sectionwise vendor report not accessible

Hi,
In J1inCERT, Printing Withholding Tax Certificate for Vendor when i run it for same vendor with same dates for different sections (194c,194j,....etc) i am getting the same output. I want section wise output in printing. What are settings missing ? Is it 'TDS Section Maintenance' & 'Assign TDS Section to Tax Codes' IMG nodes or i need to check in Vendor Master also?
Abhijit.
Edited by: Abhijit on Jul 28, 2009 3:38 AM

Hi,
Swati.
As per Anuj said if you directly go for print the system will generate certificate number. But if you see the print preview
system will neither generate certificate number nor update the values for same.
Tell me one thing for any special purpose are you using Z program for J1INCERT ?
If it so problem may arise because of that too. Earlier in my case I have gone through the same case.
Check your settings in SM30.
Is it for all sections or vendor or for particular ?
For further clarification please revert so other consultants also can contribute their valuable suggestions.
Regards,
Pankaj.

Similar Messages

Banking Reports not accessible by Lim. Financial License in SAP B1 8.81 PL 0

Dear All,
I am using SAP B1 8.81 PL 00 (Indian localization). When I log in with a Limited Financial License user , the Banking Reports cannot be accessed. It gives a message : 'You cannot open window with your current license'.
Also I cannot locate the 'Bank Reconciliation Statement' under Banking Reports->External Reconciliation.
Kindly suggest.
Regards,
William

Hi William fernandes..
In 8.81 Pl 00 It might be bug which might me corrected in the later version
check with the link for the license functionality
http://www.cornerstone1.com/SAP/SAP_Business_One_User_Types.html
Hope Helpful
Regards
Kennedy

Report for the account of vendor invoices not received ?

Hi friends;
Is there a report or a transaction that would list the details (expense accounts, cost center an amounts) in the account of vendor invoices not received ?
Thinks

Hi ,
me2n report in which u get total amount for invoiced and another column still to be invoiced amount .So check in that report even it is with PO number.

NetWeaver Administrator reports "SLDirectory is not accessible"

Hi,
NetWeaver Administrator (http://host:port/nwa) on our SP12 XI installation reports:
System Landscape Directory is not accessible
Only local system can be administered
The SLD is actually on the same server and is working correctly, even accoding to the WebDynpro Content Administration.
Anyone know what might be wrong?
Thanks,
Thorsten

Hi Dmitriy,
the setup of the NetWeaver Administrator connections to SLD is described in the Monitoring Setup Guide. There is a quick link in Service Marketplace /nwa -> media library -> documentation -> Monitoring Setup Guide.
Basically the steps to connect NWA to SLD are the following (if you have already registered the systems of your system landscape to SLD and have set up the monitoring for the systems):
- In the Visual Administrator of the Central Monitoring System (CEN)(NWA-System) under Server->Services-> SLD Data Suppliers you have to enter the CIM Client Generation Settings (http connection to SLD with User/PWD). Mark the applications "sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar" and
"sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar" (This enables the NWA to get data from SLD.)
- In the ABAP Engine of CEN, the RFC connection SAPSLDAPI must be maintained, the connection data for SLD must be entered in transaction SLDAPICUST. (This connection helps entering monitored systems in SLD.) Additionally you require a JCo RFC Connection which points from the NWA system to the RFC connection SAPSLDAPI of CEN. Create this connection in the Visual Administrator of the NWA system under Server -> Services -> JCo RFC Provider.
- SLD gateway information has to be entered in transaction RZ70 of the Central Monitoring System. (With this transaction the data transport from CEN to SLD is managed.)
- For each administered system you can store the login data with help of the Destination Service of the NWA system. (If you don't do this you get login popups in NWA for all administered systems). You can enter the login data in Visual Administrator -> Server -> Services -> Destinations as described in the documentation.
All the steps are described in detail in the Monitoring Setup Guide.
Good luck
Bye,
Astrid

Active vendor report

Hi Guys:
Is there any t-code or table i can check Vendor No, Vendor name and Date of the last payment made for all the vendors belong to one company code?
In LFB1, i can find the vendor details under the single company code, but i can not find any field can stand for Date of the last payment made, which means i need to see active vendor report.
Forrest.

in sap, if one vendor is given with the payment very long back, unless the vendor is marked for deletion either at company code level or purchase organisation level , it is said to be active.,Is it possible for you to search based upon this criteria at TABLES LIKE lfa1, ;fb1,lfm1etc.Or else better to check with FI tables .

Minority Vendor Report

Hi Guys,
We have been trying to create this minority vendor report in SAP. I tried using FBL1N to get the report, but FBL1N has minority indicator in the selection screen but does not display the Min Indicator in the report. So, is there a way i can get that into FBL1N, if not what is the best way to create a report. I tried creating a report with ABAP query, using the LDB - BRM, but it is taking for ever. I used creating the query with the vendor tables, but we were having issues with downpayment documents.
Any one has a better idea or know the tables which extract the information which we want, please share.

Folks,
Any advise or suggestions on this request? Please fill in with your ideas.
Happy T

Agewise Outstanding Report for Vendors report

Hi All,
In SAP, Agewise Outstanding Report for Vendors report coming with Vendor Master Details along with Address details in the report S_ALR_87012085 - Vendor Payment History with OI Sorted List which is not really required. Hence we need to remove all un necessary details. We need only a signle line report for each vendor like below.
Vendor Code Vendor Name Due - 30 days Due - 60 days Due 90 Days Due 120 days and more than above
The selection of period option is already available in std SAP. We have to change the output report only. This is rquired for Audit purpose.
Please help me in the above issue.
Regards
Vinu

Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Report not show after submit query in parameter form

Hi, anubody can help me with this
report not show after click submit query button in parameter form

To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
Maybe this will help some.
James K.

MS Word report not visible in executable

We are using LV 7.1 FDS (with app builder) on Win2000 prof. We have Report Generation Toolkit and Database Connectivity Toolkit installed (among others). Our VI publishes reports in MS Word. When the user clicks the "report" button, the VI generates the report and this is available to the user on screen. No file is saved and the user has the choice to save the report with any name.
The report function works fine in VI state.
But, when we make an EXE of the VI the behaviour of reporting changes. Now, pressing the "report" button triggers harddisk activity but nothing comes-up on the screen. There is no report to be seen on either the screen or the taskbar!! In the VI, the taskbar shows a word document and the report is accessible when the user clicks on this.
The amount of disk activity is similar to the case when we were generating reports in our VI.
The EXE is being tested on the same machine as the VI.
We have tested on 3 machines (with Office 200 and Office XP) but the problem remains.
What could be going wrong?
An early answer would be appreciated.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Bill and Kileen,
Thanks both. That is just what was needed. I tested and it works fine now.
The same is also mentioned in the User Guide / Release Notes that accompanied the toolkit.
I happened to collect some other webpages and .pdf that talk of other issues. In case someone happens to need this (.zip file would be less than 1 MB), please feel free to write at [email protected]
Best regards,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

PR-PO-Vendor report

Dear All,
Is there any report available in which I can get the entire information about the Purchase order, I need the information like the PO was created with referance to which PR and to which vendor has this PO has been given.
The entire information of PR-PO-Vendor relation is required in only one report not in two reports.
regards
Prabhjot Singh

Hi,
There is no standard report to get the PO and PR with Vendor in one report.
ME2M is for PO nad ME5A is for PR.
Now the one option is to download these report and use Excel skills to join both report.
and the other option is to go for report development for single report.
Thanks,
Manish

Vendor name not displayed in RFIDESM340

Hello,
I have a problem with RFIDESM340 program.
When "Reference" field has 15 characters then, the name of the vendor is not displayed in the report.
If I change "Reference" field and enter 1 more character or delete 1 character, then the name appears correctly
Which could be the problem?
Thanks

Hi
Have you seen Note 1657669 - RFIDESM340:New Legal Change applicable from January,2012?
Regards
Eduardo

Statement is not accessible

Hi Anybody ,
i am getting an error 'Statement is not accessible'
REPORT ZZDEMO_EXPORT.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
 CHANGING lf_retcode.
IF lf_retcode NE 0.
 return_code = 1.
ELSE.
 return_code = 0.
ENDIF.
ENDFORM. "ENTRY
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
 ID = 'ZPRI'(002)
 LANGUAGE = 'B'
 NAME = '123456'
 OBJECT = 'VBBK'
TABLES
 LINES = GT_LINES
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 NOT_FOUND = 4
 OBJECT = 5
 REFERENCE_CHECK = 6
 WRONG_ACCESS_TO_ARCHIVE = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM processing USING proc_screen
 CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = lf_formname
 IMPORTING
 FM_NAME = LF_FM_NAME
 EXCEPTIONS NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
 i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
How can I solve that problem ?
Thanks & Regards
Ambrish Dwivedi

Hi,
I have changed the source code , please check it.It is working fine.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = 'ZPRI'(002)
LANGUAGE = 'B'
NAME = '123456'
OBJECT = 'VBBK'
TABLES
LINES = GT_LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
CHANGING lf_retcode.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM processing USING proc_screen
CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = lf_formname
IMPORTING
FM_NAME = LF_FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
Regrads,
Suvajit

Photos visible in iPhoto application but not accessible for upload

Any help anyone can provide with this is greatly appreciated. I took pictures of a friends wedding and have been trying to order a photobook as a gift. I decided to try to use iPhoto to make the book. I don't use iPhoto very often and at the start of this, my iMac was running on the Tiger OS and an old version of iPhoto (I think 5 or 6). After completing the first version of my photobook, I tried to place an order, but got a message that my version of iPhoto wasn't supported any longer and I'd have to upgrade.
I called the Apple store and ordered the Mac Box Set to upgrade my operating system to Snow Leopard and my iLife to version 11. The woman at the Apple store had me check my system info., available space, etc. and she assured me that my system should be able to handle the upgrade. I went ahead with the upgrade, loading the new operating system first and then iLife. The install seemed to go just fine, I never got any error messages and all the applications appear to function properly. So, I used the new version of iPhoto to create a photobook. I then placed the order the first time. On my end the process went smoothly and the upload completed without interruption. However, I got an e-mail message 4 days later saying my order couldn't be completed because files did not upload properly. So, I tried to place the order again, following the instructions to make sure that all my other applications were closed, etc. Once again the process seemed to be completed without any issues. However, now a week later, I once again got the error message that my order could not be completed because files did not upload properly.
So, I decided to try to place an order through a different vendor. Now I have discovered that all my recent photos (despite appearing in the iPhoto) are not accessible when I try to access them for upload to the vendor's site. The icon for iPhoto library is grayed out and there is no longer an option to access my photo rolls through finder. So, now I am unable to place the order for the photobook.
Can anyone help me figure out how to fix this? Any help you can provide is greatly appreciated.

Nothing to be fixed. Just a little learning for you.
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Compile Error Statement is not accessible

Hi All,
I have report in SAP 4.7 . when i do syntax check on it it give a warning -"statement is not accessible."
But same thing when we compile we are getting as Syntax error in ECC 6.0 .
when I compile it, it prompts
Include ZHRIPENR
Statement is not accessible.
My REPORT program -
REPORT ZHRIBANK NO STANDARD PAGE HEADING
 LINE-SIZE 80
 LINE-COUNT 65.
START-OF-SELECTION.
INCLUDE ZHRIPENR.
END-OF-SELECTION.
My INCLUDE program -
*INCLUDE ZHRIPENR.
PERFORM BATCH_INIT.
FORM BATCH_INIT.
ENDFORM. " (BATCH_INIT)
when I compile it, it prompts
Include ZHRIPENR
Statement is not accessible.
Please let me know how can i proceed .
Cheers,
Reddy

Hi ..
The Reason may be bcoz you are Placing the FORM statements inside the Include.
Just Remove the FORMS from the Include and Place the in ur Main program in the Last.
Note: Subroutine definitions has to be in the end of the code.
REWARD IF HELPFUL.

Recon Acct and Vendor Acct not tele.

Hi Experts
My report in FBL3N and FBL1N not same.
In FBL3N I only key in the;
G/L Code          : 1234
Company Code : MY01
Open Item date : 30.06.2009
In FBL1N I key in the;
Recon account in dynamic selection : 1234
Company code;                                   : MY01
Open item date same as FBL3N          : 30.06.2009
If I extract the report for normal item then the report is same. If I check the noted item and special G/L transactions then the report is not same. I guess the FBL3N is not capturing the noted items and special G/L transactions.
Is the any table to get the report same as in FBL1N?
Thanks
Edited by: krishmenth on Nov 12, 2009 4:04 AM

Hi,
All the special GL Transactions are stored in Altenate Reconciliation Account.
Example:
If you posted down payment to vendor this transaction getting stored initially in alternate recon account. Once you transfer this from alt recon to normal recon account the recon account will get updated with this transaction.
Until there is a difference between Vendor Report(FBL1N) and GL Report(FBL3N).
Regards,
Krishna Kishore

J1INCERT sectionwise vendor report not accessible

Similar Messages

Maybe you are looking for