J2EE\admin Location on Distributed SOLMAN/NW Install?

I have a three server distributed install for SOLMAN - NW 7.0 EHP1 on Windows 2008. I can't seem to locate teh path for the Java admin for the visual admin or the config tool normally located at : <Drive>:\usr\sap\<SAPSID>\<Instance_Name>\j2ee\admin\go.bat.
I am able to launch the NW web client and admin console, but can't log in with installed users at this point, and I can't find the location mentioned above. Can anyone advise where this path should be between the SCS, DI & CI servers?
thanks

Hi Edward,
These tools should exist on the server where you have installed the Central Instance (CI).
Please check on the Central instance server.
Cheers......,
Raghu

Similar Messages

Datasource Definition in J2EE Admin?

Hi guys
Here is a newbie question... What is the use of defining a Datasource in the J2EE Admin gui.
When creating a communication Channel in the Integ.Builder you allways specify jdbc connect string info anyway?
Has anyone here configured XI 3.0 JDBC adapter to communicate with an Microsoft SQL Server?
Please provide information to share

Hi Tobbe,
Another example of using the datasource configured in the J2EE Admin is when you want to do a lookup of a SQL table during transformation in the mapping program (Message Mapping, XSLT or Java), you will not need to manage the connection in your mapping program (just obtain the connection object from J2EE).
By using the connection pool defined in the J2EE Admin, the JDBC connections are shared, therefore, more efficient, and also it simplfies the development.
Below are the basic configurations for MS SQLServer:
JDBC Driver:
com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection:
jdbc:microsoft:sqlserver://server:port;DatabaseName=database_name
Note: The SQLServer JDBC drivers must already been installed on the J2EE engine.
Regards,
Bill

J2EE Admin Tool

Hi all1 i'm working with J2EE Engine version 6.30 but its installed on a remote server, and i want to acces with the J2EE admin tool from mi pc, i have the J2EE admin 6.40 and when i'm trying to connect to the J2EE Engine 1rs gives a wraning: 'Warning: J2EE Engine kernel version is older than the version of Visual Administrator' then it continues with the logon and gives me the following error:
'Error while connecting
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.Nested exception is:
java.io.InvalidClassException: com.sap.engine.services.adminadapter.descriptor.ClusterDescriptor; local class incompatible: stream classdesc serialVersionUID = -1045741131628563809, local class serialVersionUID = -7364664042028052650'
I guess it happens because of the version, i dont know.
If so, i wanna know if i can download the J2EE Admin Tool or if somebody can give it to me.
thx
rgds.
Gregory

Hi Ivaylo! thx.
I did just what u are saying to me, and when i'm trying to connect from my local pc to the remote server the logon stops in 99% and in the task running appears the following message:
'Login to Sapcfd.spo.com
Host : Sapcfd.spo.com
User name : G.MAYORGA
Port : 56004
Layer : None
Successful !
I hope u can help me.
thx n rgds.
Gregory

SAP J2EE Admin Port 50011, 99% it stops

Hi,
We have installed EP6 SP2, we tried to apply the patch for that we tried to connect to SAP J2EE Admin through port 50011, it goes till 99% and stays there. We are not able to apply the patch because of this.
Any thoughts on this or suggestions will help us.
Thanks
Senthil

Login is : "Administrator"
Password :
Hostname : Specify the proper host name out here
Port number :50004
Refer Victor's note on how the port is calculated. This assumes that your portal is installed on 50000, http://hostname:50000/irj should give you the portal home page. Are you able to login here? On what basis did you choose 50011?
Again there is no need for a password. If you are still not able to login, check your installation.

I am trying to install the cs5 upgrade on my new laptop, however, I cannot locate my cs4 program to install first. Am I out of luck?

I am trying to install the cs5 upgrade on my new laptop, however, I cannot locate my cs4 program to install first. Am I out of luck?

You do not need the older version installed in order to install the upgrade version, but you do need the serial number from CS4 to prove that you qualify for using CS5. During the activation process for CS5, after you successfully enter the CS5 serial number you will be asked to select the qualifying version (CS4) from a list and to enter its serial number.
If you registered CS4 when you originally installed it then you might be able to find the serial number available in your Adobe account online in the Products section.
Find your serial number quickly

Advantages of using NWA over Visual J2EE Admin Tool

Hello,
can you please tell me What are the advantages of using NWA over Visual J2EE Admin Tool ?
Thanks,
Teja

Hi
Other then the previous reply,In simplest word we can say --now we have two way to admin the content in the landscape.
1.If we want to do it off-line the we can do form Visual admin( works well because after modification we start the server for changes takes place)
2. Form NWA we can do all administration with indicative navigation (quite frustrating in visual tool ) and no need to start /restart the surver
Best Regards
Satish Kumar

J2EE admin is locked every time the application is Deployed.

J2EE admin is locked every time the application is Deployed.
So, the admin should be unlocked after every deployment
Please give me why this is happning? It's very very urgent

Hi Krishnaveni,
   Can you check for this property "No password change required" - in your visual Admin?
For this one please follow below steps.
    Open "Visual Administrator" in that "Cluster> Server>Services-->Security Provider"
    Goto "Runtime" - tab and then "User Management". Search for the user "J2EE_Admin" and double click on the user name to get the user management property sheet. There you can find "No password change required". If it is not checked, please check that one. then that password wont expire for every deployment.
Regards,
Sridhar

I have inherited equipment from my predecessor at my new job. I cannot locate the Premiere Pro CS6 install CDs. Could this have been something that was downloaded?

I have inherited equipment from my predecessor at my new job. I cannot locate the Premiere Pro CS6 install CDs. Could this have been something that was downloaded?

Could have been... do you have a supervisor who keeps track of what is ordered and how it is purchased?
Do you have access to the Adobe ID that was used to install the software so you may check the account?
Lost information
https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Managed System Setup Wizard: which J2EE-Admin-User

Hello,
I'm running the managed system setup wizard in the diagnostic.
In the setup of the parameters, I have to enter the J2EE-Admin-User. But which one?
I tried:
SMD_AGT_ADM (Dialog user with admin roles on both stacks)
SMD_AGT_ADM (Communications user with admin roles on both stacks)
The user was created by me before the setup. But regardless of the user settings, I get the following error:
A logon failure occured on frces4139/SM7/00 (192.168.1.139).
System Setup aborted, to prevent locking the User Account.
Please check error details, specify a valid User/Password if necessary, and start Setup again
Any ideas? Which user or user settings have to be maintained?
Thanks,
Jan

Hello,
I think the user you need to enter here is the j2ee_admin user or another user with SAP_J2EE_ADMIN role.
Regards,
Benjamin Rouger

J2EE Admin connection error

I have the following scenario:
The EP6(SP10) user admin was J2EE_ADMIN after the installation. When I changed the autentication to a LDAP Service, this user stopped working. It is ok! I went to the SAP J2EE Visual Admin with the emergency user and added another user as Administrator and it's working fine.
All EP administration funcitions are working, but in the trace files the error described below persists.
I think there is a place to replace this user, but I don't know where.
How and where I can change the J2EE_ADMIN to fix this?
Best regards,
Adriano
#1.5#001143594D25005E000012F0000016D40003FC424001F38F#1121786402039#com.sap.jms#sap.com/irj#com.sap.jms.server.sessioncontainer.InboundBus instance=default#v_seg-nix#0####81b28d70f86811d9b031001143594d25#Thread[Thread-55,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###com.sap.jms.server.exception.JMSServerSecurityException: Cannot create connection with user J2EE_ADMIN.
at com.sap.jms.server.service.impl.SecurityServiceImpl.checkAuthentication(SecurityServiceImpl.java:424)
at com.sap.jms.server.sessioncontainer.handler.ConnectionHandler.onCreateRequest(ConnectionHandler.java:120)
at com.sap.jms.server.sessioncontainer.handler.ConnectionHandler.process(ConnectionHandler.java:69)
at com.sap.jms.server.sessioncontainer.InboundBus.process(InboundBus.java:143)
at com.sap.jms.server.sessioncontainer.InboundBus.enqueue(InboundBus.java:116)
at com.sap.jms.server.sessioncontainer.SessionContainer.receiveFromDispatcher(SessionContainer.java:63)
at com.sap.jms.server.routingcontainer.RoutingContainer.receiveFromDispatcher(RoutingContainer.java:332)
at com.sap.jms.server.JMSServerContainer.createConnection(JMSServerContainer.java:428)
at com.sap.jms.server.ServerClientAdapter.sendAndWait(ServerClientAdapter.java:87)
at com.sap.jms.client.connection.ConnectionFactory.sendConnectionCreateRequest(ConnectionFactory.java:375)
at com.sap.jms.client.connection.ConnectionFactory.createConnection(ConnectionFactory.java:319)
at com.sap.jms.client.connection.ConnectionFactory.createConnection(ConnectionFactory.java:244)
at com.sap.jms.client.connection.QueueConnectionFactory.createQueueConnection(QueueConnectionFactory.java:70)
at com.sap.ip.collaboration.core.api.rtmf.core.RTMFMessaging$JMSPolling.startRunning(RTMFMessaging.java:1095)
at com.sap.ip.collaboration.core.api.rtmf.core.RTMFMessaging$JMSPolling.run(RTMFMessaging.java:1037)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.security.core.server.userstore.UserstoreException: Could not get user J2EE_ADMIN
at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:187)
at com.sap.engine.services.security.userstore.context.UserContext.getUserInfo(UserContext.java:87)
at com.sap.jms.server.service.impl.SecurityServiceImpl.checkAuthentication(SecurityServiceImpl.java:418)
... 15 more
Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "J2EE_ADMIN" not found!
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:334)
at com.sap.security.core.imp.DBTextFileUserAccount.<init>(DBTextFileUserAccount.java:56)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:339)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:277)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:371)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:366)
at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:183)
... 17 more
#1.5#001143594D25005E000012F1000016D40003FC424001F8D8#1121786402039#com.sap.jms.client.connection.ConnectionFactory#sap.com/irj#com.sap.jms.client.connection.ConnectionFactory.checkForException#v_seg-nix#0####81b28d70f86811d9b031001143594d25#Thread[Thread-55,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Fatal#1#/Applcations/JMS#Plain###Failed to create connection! Reason: Cannot create connection with user J2EE_ADMIN.#
#1.5#001143594D25005E000012F2000016D40003FC424001F98D#1121786402039#com.sap.ip.collaboration.rtc#sap.com/irj#com.sap.ip.collaboration.rtc.class com.sap.ip.collaboration.core.api.rtmf.core.RTMFMessaging.JMSPolling.startRunning()#v_seg-nix#0####81b28d70f86811d9b031001143594d25#Thread[Thread-55,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Java###Exception in method: javax.jms.JMSSecurityException: Cannot create connection with user J2EE_ADMIN.##

Hi Christoph,
If you want to make the connection using the message server HTTP port, I don't think there is a solution to the problem. The SolMan's J2EE message server will reply to the agent with the P4 connection information for a specific app server (e.g. load balancing across several J2EE instances on your SolMan if you have them), and then the agent will attempt to connect to the instance using the P4 protocol.
If it's just a name resolution issue, and you really want the agent to connect to an instance using a virtual hostname, then Purnachand's suggested workaround to connect directly to the P4 port (rather than to the message server) should have worked. You should run smdsetup and provide the virtual hostname and the P4 port. The connection will not be load-balanced -- the agent will always connect to the instance corresponding to the virtual hostname. This technique requires avoiding the automated connection wizard and using the smdsetup script exclusively (since the automated connection wizard does not yet support direct P4 connections last time I checked).
You also say "there is the p4-port locked" --- if you mean, firewalls prevent P4 connections regardless of the hostname (physical or virtual), you will need to take a different approach. Your best bet would be to tunnel your diagnostics agents through a saprouter. In this case the agents would connect to the saprouter on port 3299, and the saprouter would complete the p4 connection to the physical instance. As far as I know this is the only supported way for diagnostics agents to traverse a firewall.
I hope this helps and good luck!

J2ee Admin User locked on SDM Deployment - BI 7.0 and EP 7.0

Hi,
We had a recent issue on BI iview publishing from the BEX WAD 7.0 in our Production Portal server.
The BEX WAD had the error " Java communication error"
" An Error occured during communication with the BI Components of the J2ee engine"
We traced down to identify that the current stack NW 7.0 SP14 BI Components had issues and had to patch to the next level
However, during deployment of the patch using SDM, the components (all) failed posting the following error. The SDM deployment got struck and the J2ee Engine user j2ee_admin was locked.
Only a restart of the j2ee engine is allowing us to get the Visual Admin connected. But the SDM deployment again is failing and admin user gets locked. Is there any tested solution to solve this.
Kindly help asap.
Trace:
SDM:
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [xxxx] with user name: [j2ee_admin]check your login information.
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
J2ee Engine:
Error while connecting
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: This call must be performed from a system thread.
     at com.sap.engine.services.security.login.SecuritySession.setExpirationPeriod(SecuritySession.java:479)
     at com.sap.engine.services.security.login.TicketGenerator.getSecuritySession(TicketGenerator.java:180)
     at com.sap.engine.services.security.login.SecurityContext.load(SecurityContext.java:313)
     at com.sap.engine.services.rmi_p4.Message.loadContextObject(Message.java:345)
     at com.sap.engine.services.rmi_p4.Message.parseMessage(Message.java:239)
     at com.sap.engine.services.rmi_p4.Message.getByteArrayInputStream(Message.java:314)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:212)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hi Anup,
The restart unlocks the j2ee engine admin user and i am able to login to Visual admin and SDM and not otherwise (SDM is hanged and doesnot allow another session and hence only restart helps me to get into SDM again)
Admin Pwds reset etc from config tool secure store and all possible solutions have been tried before restart.
However, after restart, when we try to deploy again, the deploy fails saying the same msg
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [xxx] with user name: [j2ee_admin]check your login information.
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
Any clues ?
Regards
Venkat.

Admin password won't work to install software

I'm trying to install Photoshop and when it gets to the point where it asks for the password, I enter it but the password box just disappears for a second and returns asking for the password again. (I entered it several times with the same result each time.) I'm certain that I'm entering a valid admin password and that permissions for the applications folder are set to read & write for admin and system. Just to be sure I tried entering the password incorrectly and the box shook as it normally would when an incorrect password is entered. Has anyone had a similar problem with Adobe products or installing any other software on Lion?
Also, I just installed Adobe Lightroom last night and it worked just fine. And when I just tried to run the Adobe Creative Suite Cleaner Tool which also asks for a password and I'm having the same problem. So I know that it's not just Photoshop but I don't know if it's just something to do with Adobe or maybe all software which requires an admin password to install.
Trying to repair permissions and run a virus scan now although I think these two options are unlikely to fix the issue...

It looks like repairing permissions did the trick.

SMS Provider Locations Do Not Match - Problem installing SCCM 2012 R2 CU4

I have an SCCM 2012R2 CU1 site that has been upgraded from SCCM 2012 non-SP1, so I have gone from 2012 to 2012SP1 through CU5 and then to R2 and then to CU1.
Over the course of the life of this site, which has more than 10k clients and 10 Site Systems, we have installed roles, removed roles, moved roles and removed Site Systems.
I have also installed and removed SMS providers . . . which is where my issues begin.
The site properties in the console list 6 SMS Providers and even lists an SMS provider on a server that was retired and is no longer a Site System. When I query WMI using the following VBS script it only returns the *ACTUAL* SMS Provider locations,
2 of the 6 listed in the GUI.
On Error Resume Next
Const ForReading = 1, ForWriting = 2, ForAppending = 8
strComputer = "."
Set oFS = CreateObject("Scripting.FileSystemObject")
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\sms")
If Err.Number <> 0 Then
WScript.Echo "Cannot connect to WMI"
WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
End If
Set oLog = oFS.OpenTextFile("C:\Temp\SMS_ProvList.log",ForAppending, True)
If Err.Number <> 0 Then
WScript.Echo "Could not create output file"
WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
End If
Set colItems = objWMIService.ExecQuery("SELECT * FROM SMS_ProviderLocation",,48)
count = 0
For Each objItem in colItems
count = count + 1
oLog.WriteLine "-----------------------------------"
oLog.WriteLine Now()
oLog.WriteLine "Provider instance " & count & " : " & objItem.Machine
oLog.WriteLine "NamespacePath : " & objItem.NamespacePath
oLog.WriteLine ""
Next
I have a test environment which has also gone through some growth over its lifetime and has had the same changes to SMS Providers made. When I first attempted to install SCCM 2012 R2 CU4 in this test environment the installer continually failed the
prerequisite checker when querying the CU level of the SMS Providers. The only way that I could get past that issue was by running a site maintenance task via the CM installer and installing an SMS Provider at the location that had previously been an
SMS Provider but I had uninstalled that role.
I do not want to have to do that in my production environment, and would not even be able to do so if I wanted as I have retired one of the servers listed and cannot re-provision that machine.
Any CM12 gurus out there with suggestions? This strikes me as a standard MS problem when having multiple development teams working on a product/update and not having a standard location to check for configuration information (This is exactly the problem
when configuring DNS suffixes via GPO and not manually setting the GUI to match).
Thanks!
Josh Gerner
Cornell University.

The issue I have is that I cannot find the WMI class that holds the SMS Providers that are returned by the GUI.
I actually engaged MS Premier for a SCCM 2012 RAAS about 2 years ago and that was when the discrepancy first reared it's head. The support person that I worked with couldn't give me a way of cleaning those entries at that point which is when I started
logging the locations to be sure that my maintenance task was really installing or removing the SMS Providers.
Josh Gerner

What is the correct way to determine the install location of Acrobat/Reader to install plugins?

We were previously using the following registry key to determine where we need to install our Acrobat/Reader plugin.
HKEY_LOCAL_MACHINE\Software\Adobe\Adobe Acrobat\%d\InstallPath
HKEY_LOCAL_MACHINE\Software\Adobe\Acrobat Reader\%d\InstallPath
(and append \plugin_ins to that result)
With Acrobat DC, I no longer see that registry key.
I was planning on changing our code to instead look here to determine the install paths:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\Acrobat.exe\Path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\AcroRd32.exe\Path
Is this the recommended way of determining where to install plugins? I would rather not have our installation break when they update Acrobat/Reader the next time (for example maybe in the future they decide to change the executable name...)

Enterprise Guide can be found at http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/index.html   (came right up on a web search for me). You want the information about product tracks and installer bit locations.
SDK releases are usually within 30 days of the product release.

Keep getting "Can't Locate Disk" error message when installing software

Hi!
I'm trying to install some software on my PowerBook G4 . . . every time I follow this routine:
1) I insert the installation disk of the software.
2) Classic 9 starts up - I then get the folder on the disk with then install icon.
3) I toggle through 3 or 4 screens, agreeing to licenses, etc. - then . . .
4) When I click on the "OK TO INSTALL" button an error message appears and stops my progress - it reads, "Can't locate disk" - duh! We've been working off this disk for 5 minutes - the disk shows up on the desktop - I can locate the disk - why can't my computer? Please help me if you are able - thanks!

Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

J2EE\admin Location on Distributed SOLMAN/NW Install?

Similar Messages

Maybe you are looking for