J2ee and j2eeadmin missing after the installation of java_ee_sdk-5_04-windo

Hello,
I'm newbie with J2ee and I would like to test JMS technology.
I have installed java_ee_sdk-5_04-windows.exe on my windows machine and I read the JMS step by step tutorial.
The problem is that at a certain step there is a ligne saying
Starting the JMS Provider
When you use the J2EE SDK 1.3.1, your JMS provider is the SDK. At another command line prompt, start the J2EE server as follows:
j2ee -verbose
Wait until the server displays the message "J2EE server startup complete."
The problem is that there is no j2ee.exe or j2ee.bat on my machine. I first checked under C:\Sun\SDK\jdk\bin and I also did a search on the full harddrive.
Few lines below I have to use the command "j2eeadmin -listJmsDestination" but again this j2eeadmin is not present on my machine.
How is it possible that these files are not present on my machine after installing java_ee_sdk-5_04-windows.exe?
How can I solve my problem?
Thanks in advance for your support.
Alain.

hello Philipina,
I had the same problem when i was trying to do what in that tutorial.
(exactly at this moment i bumped into your post searching for JMS stuff)
The thing is j2ee sdk 1.5xx is a whole lot different than 1.3xx and there are no j2ee -addJmsDestination etc.
Please consult the documentation of your JMS provider to set up administered objects.
that's as far as i got to :(

Similar Messages

  • I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

    I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

    As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system.  I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

  • Have been trying to download Adobe Air for a website I'm trying to access (Colonial Williamsburg). After the installation was finished, I went back to the website and it still said I didn't have Adobe Air. I tried reinstalling and Adobe said I already hav

    I have been trying to download Adobe Air for a website I'm trying to access (Colonial Williamsburg). After the installation was finished, I went back to the website and it still said I didn't have Adobe Air. I tried reinstalling and Adobe said I already have it on my system (Mac OSX 10.9). I can't find the app. I uninstalled, restarted, etc. and same results.
    Thoughts anyone?

    Lanakivee
    Try this it worked for me Pat Willener gave it to me off the site :
    I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
    Try this
    download the FP uninstaller from http://www.adobe.com/go/tn_14157
    close all browser windows, then run the uninstaller
    download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    close all browser windows, then run the installer

  • Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

    Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
    To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
    I am using Windos 7 64 bit Professional German edition.

    Hi,
    to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
    Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
    to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
    André
    [1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
    "A programmer is just a tool which converts caffeine into code"

  • I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

    I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

    But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939.  Then how its become 3G.

  • I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

    I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • What can I do to recover data from my iPhone 4s? The phone fail to come on again after the installation of the new iOS8. The phone is locked and I didn't make any backup before the updating installation. Inside I have very important info.

    I Have problems with my iPhone 4s after the installation of the new iOS8, the phone doesn't want to switch on again. I need to recover some important data that I have inside the phone.

    Ralph Landry1 wrote:
    There isn't anything you can do to recover contents from iPhone 4s if you cannot get the iPhone to startup.  Connect it to a wall outlet so you have a solid power source, then do a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if that appears.  If the iPhone still will not startup, the next options to try will automatically erase your iPhone all of its contents.
    The next step is to do a restore via the recovery mode as described in http://support.apple.com/kb/HT1808 but again note that this erases the iPhone.
    Thank you Landry, it is really a good experience to solve problem of iPhone Data Recovery!

  • I updated my mac and after the installation it wont boot up, i updated my mac and after the installation it wont boot up

    i updated my mac and after the installation it wont bootup

    No chimes just the normal startup sound and then that's it stops with the apple logo and shuts down tried most of the short cuts like command +r command p+r nothing works

  • Mini calendar in mail missing after Lion installation

    mini calendar in mail missing after Lion installation

    >After installing Lion (intel I-Mac 2g ram). My Microsoft Office 2004 no longer runs.
    Upgrade to a Universal compatible version of Office or equivalent.  http://www.neooffice.org/ is the least expensive alternative, though importing Entourage into iCal, Mac OS X Mail, and Addressbook works best if the data was exported from Entourage while still in Snow Leopard.
    >Also, when I select "printer friendly" pages in Safari or Firefox, I get a "missing plugin" message.
    When you upgraded, did you make sure that Safari was installed in the Applications folder?  If not, you may have to redownload Safari from http://www.apple.com/safari/ as it happens to be the same version.  Firefox double check is already Lion compatible.  For more on upgrading to Lion, see my FAQ*:
    http://www.macmaps.com/upgradefaq.html#LION

  • Package status not appended in the Add Remove Programs in control panel after the installation.

    Hi,
    I have a strange problem with "Package status not appended in the Add Remove Programs after the installation.".
    Like, onec the package is installed via SCCM, it should be listed in the Add Remove programs with the package name, version and the install date.
    At times on random machine these details are not appended. Although the application works fine on the machine, but the correct details are not populated in Add/ Remove programs.
    There is no issue with the package as it shows correct details on few other machine where it is installed.
    This behaviour is random on random machines. Hence, very difficult to track the reason.
    System Security analyst at CapG

    Hi Jason,
    Yes, i have tried Jorgen's suggestion, ans as said earlier. It install the application smoothly on any other machine (any random machine) perfectly with correct details in Add Remove Programs.
    As mentioned earlier, the same package, same environment, same set of machines with same OS, it installs correctly on few machines.. and on few its just misses to add correct details in Add Remove progs.
    If it was related to package, how does it install corretly on other machines?? How does the same package installs correctly when done manually or by that means by PSEXEC.
    To a matter of fact, we are checking our package for the multiple times now, just to make sure it is buldled correctly with correct install scripts. We are trying to search different multiple ways to see what makes the package to skip the
    correct entry in the Add Remove.
    To add, this is not with one package, it happens with random package with random machine. There is not typical behaviour that could be tracked.  
    All the installations done via SCCM 07, with admin account.
    This looks more tricky and complex then as simple as saying, its the fault of packaging.
    I hate to say this but this is NOT a CM07 problem, You will need to work with your packaging team, and use tools like process monitor,psexec and the msi log to determine why it is failing.
    Your first step is to find a pc where you can consistent get the setup to fails. once you get that you can use process monitor and the msi log files to determine what is going on.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation

    Hi Friends,
    After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
    I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.

    i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.

  • Who kills your iPod after the installation of iPod updater?

    Hello all,
    First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
    I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
    So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
    Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
    In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
    How should we do before the update of the lastest software, for the XP user please do the following:-
    1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
    2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
    3. Have your iPod a full charge before the installation of the iPod updater
    So, who is the main killer for the iPod?
    For further infomation please read the following link - which wrote by a groups of great people - thank you guys
    http://discussions.info.apple.com/webx?128@@.68ae8668

    Hello Shanker Ghimire,
    Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings. 
    By the way, have you ever got any error when install that Visual Studio SDK?
    In case there are some unknown errors, I'd like to ask you for some logs. Please use 
    http://aka.ms/vscollect 
    to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
    https://skydrive.live.com/ 
    and share the link here.
    Best regards
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My URL/Address bar is missing after the delicious update. My search engine bar is missing after the Delicious update. I cant figure out how to turn them back on. rhouwan@*****.***, thank you.

    My URL/address bar is missing after the Delicious update.
    My search engine drop down menu is missing after the Delicious update.
    I can't figure out how to turn them back on, please advise, thanks.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Connect SAP BO server to domain after the installation.

    Hello,
    I would like to ask if it is fine to connect SAP BO BI 4.x Windows host to the customer domain after the installation of SAP BO.
    I was trying to find answer on this but nowhere is explicitly recommended to connect SAP BO host to domain before the installation.
    My question is related to Windows AD Authentication where two conditions need to be secured:
    1. Windows AD authentication only works if the CMS is run on Windows
    2. These Windows machine must be joined to the appropriate AD domain
    What I found till know is that you can use Windows AD Authentication only when SAP BO server is in domain.
    What is concerning me is that when I start with installation of SAP BO on the server which is not connected to any domain then the installation process is taking during the installation actual hostname of the SAP BO server (e.g. boserver) automatically. There is no requirement or possibility to specify hostname or IP address manually during the installation process. And I assume that connecting SAP BO server to the domain after installation will cause that hostname will change (e.g. to boserver.domain.com).
    So question is if this change will cause any issue for functionality of SAP BO application. If not could you please send me an official statement from SAP Note or any BO Documentation as I was not able to find any.
    Thanks in advance for opinions and answers.
    BR,
    Peter

    Hi Bill,
    thanks for reply. I spoke with couple of my colleagues which are supporting AD and yes I can agree with you that connecting server to the customer domain after the installation of BO can bring some limitation up to Domain policy.
    Best practice in order to prevent possible issues is to join server to the domain before installation.
    Another possible issue can be that some customers are using own naming convention for server's hostname so joining server to the customer domain is conditioned by a change of hostname and this can cause issue with correct functioning of BO application.
    Thanks again for your opinion I really appreciate it.
    Wish you a nice week.
    BR,
    Peter

Maybe you are looking for