J2EE and user authentication not working

Hi,
has anyone gotten the basic/form based authentication to
work in the latest version of the 9iAS?
Oracle9iAS (9.0.2.0.0)
I've read all the posts and articles from orionsupport.com
BUT it still does not work.
Support Folks from ORacle: Where is the latest documentation
for the Server ???? Everything seems outdated??
cheers,
Vijay

Hi,
You can change User and password through SU01 through UME. and also read SNote:  Note 891614 - Login problems / Expired password
Regards
Thomas

Similar Messages

  • Tacacs user authentication not working

    I am trying to setup my AP to use tacacs+ running on Cisco ACS to authenticate users logging into the AP with no success.
    Here is the AP config.  At the end of the config you can see the debugs that are running and the output of those when I try to login to the unit with the web browser.
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname ap1250
    aaa new-model
    aaa group server radius rad_eap
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    cache expiry 1
    cache authorization profile admin_cache
    cache authentication profile admin_cache
    aaa group server tacacs+ tac_admin
    server 192.168.1.25
    cache expiry 1
    cache authorization profile admin_cache
    cache authentication profile admin_cache
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login default local cache tac_admin group tac_admin
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local cache tac_admin group tac_admin
    aaa accounting network acct_methods start-stop group rad_acct
    aaa cache profile admin_cache
    all
    aaa session-id common
    power inline negotiation prestandard source
    username seth privilege 15 password 7 02050D480809
    username Cisco privilege 15 password 7 072C285F4D06
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    shutdown
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    shutdown
    dfs band 3 block
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.1.60 255.255.255.0
    no ip route-cache
    ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    tacacs-server host 192.168.1.25 port 49 key 7 00071A150754
    radius-server attribute 32 include-in-access-req format %h
    radius-server vsa send accounting
    bridge 1 route ip
    line con 0
    line vty 0 4
    end
    ap1250#  sho debug
    General OS:
      TACACS+ authentication debugging is on
      TACACS+ authorization debugging is on
      AAA Authentication debugging is on
    ap1250#
    *Mar  1 00:25:56.239: AAA/BIND(00000024): Bind i/f
    *Mar  1 00:25:56.243: AAA/AUTHEN/LOGIN (00000024): Pick method list 'default'

    The radio's are shut down as I do not have an SSID configured on the unit either at this time.  I was merely trying to get the setup for login authentication.
    I did also have a local user name and password defined but was unable to use that login either.
    I tried the config on another AP and got it to work by changing the statement to read
    aaa authentication login default local group tac_admin
    This was done by not checking the box for caching.
    Seth

  • 11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

    Hi,
    The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
    I have tried the following resolution:
    - From command line execute commands to set variable properties via admintool.exe /command vartext.txt
    Open rpdname user password
    SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
    Save
    Close
    Exit
    This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
    The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
    Is this a bug?
    Thanks in advance
    Edited by: 983325 on 26-Feb-2013 02:35

    There is a 3.1.0.5 client. First thing I would try is the newest client.
    Sent from Cisco Technical Support iPad App

  • Upgrade to IOS and ACS authentication not working

    Hi. I have just upgraded my 1200AP to IOS Version 12.2(11)JA1. I am using LEAP with MAC address auth in the ACS (version 3.0). I cannot get onto LAN though. Error on ACS failed auth report says 'User Access Filtered' even though the MAC of the card is in there. I can still authenticate with AP's that are still at old version though. A debug on IOS AP shows that the ACS is replying with a FAIL auth after LEAP negotiation and the ACS interestingly gives the failed MAC address as AAAA.BBBB.CCCC (note dots between) making me think that the AP is sending it in that format instead of AAAABBBBCCCC. I cannot add the MAC to the ACS in the dotted format as it is a 12 character string. Is this a format issue with the RADIUS passthru? Has anyone any idea why this is happening? Thanks for any help in advance.

    Just thought I would let you know that I have got the cause of this. This happens if MAC authentication is enabled in the ACS. Once I turned that off it worked again. I think it is due to a format error in the data sent from ap to acs.

  • Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    We are all iphone users just like you.
    Do you have a question for fellow iphone users?

  • The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works.

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

  • Windows error: iTunes crashes (uninstall and reinstall does not work)

    Hello all.
    I (and another user) have had a problem with iTunes crashing when trying to open it. Windows just generates the typical vague error message that explains nothing as to what the problem is. Uninstalling and reinstalling did not work, and using the "Repair" option did not work either.
    This was the solution. Hope it works for you. Cheers.
    C ;o)
    Here are the steps, some might be redundant, but still follow them to try and get iTunes to work.
    1. *Extremely important* Close the QuickTime launcher in the tray on the right side of your Windows TaskBar (right-click on the blue QuickTime "Q" logo next to where you have the time and date and select "exit".) The QuickTime logo should disappear from the tray.
    2. Go to where your iTunes library folder is, copy it and put it elsewhere on yoour hard-drive. This is where you asked your iTunes to point to and keeps the full repository of the files sync'ed to your iPod. If you don't do this, you will have to re-create the full library of all the music and files you have put into iTunes.
    3. Unistall iTunes and reboot your PC.
    4. Go to c:\Program Files\Quicktime and delete this whole folder.
    5. Go to c:\Windows\System 32 and: delete the Quicktime FOLDER there; then (ii) scroll down and delete all other QuickTime related files (there should be 5-10 of them, I didn't count, some will have a name like QuickTMvr whatever).
    6. Empty Recycle Bin.
    7. Reboot your PC.
    8. Go back to Apple Website and download: iTunes, and (ii) QuickTime installation only (without iTunes).
    9. Install QuickTime FIRST (use newly downloaded version)! Check it works OK by opening it.
    10. Close QuickTime lanucher from tray, as explained above in step 1.
    11. Install iTunes (use the newly downloaded version).
    12. Open iTunes. If it opens fine (clap your hands and say "hurray", and actually I said out loud to my PC, "Please work" and it did - I don't know if this step helped at all. ;o) ), then close iTunes FIRST BEFORE DOING THE NEXT STEP. Go to where the new iTunes (and library) folder is, rename the new iTunes folder (as you might notice when/if you open iTunes, that it is all blank), and copy the old iTunes folder (from step 2) to the same location. Re-open iTunes. It should be the way it opened the last time.

    Btw.
    Don't forget that, from my experience, most iTunes errors comes from malfunctioning instances of QuickTime.

  • I turned of iMessage and now I want it back on and it's not working, I have changed my password and now I don't know what to do. Is there something obvious I am doing wrong?

    I turned of iMessage and now I want it back on and it's not working, I have changed my password and now I don't know what to do. Is there something obvious I am doing wrong? I have done this on both of my iPads and it hasn't let me go back on to iMessage on either of them.

    iCloud System Status
    Current
    iCloud: iMessage - Users Affected: Some
    11/18/2012 13:34 PSTUsers are unable to use iMessage. Normal service will be restored ASAP.
    iCloud: FaceTime - Users Affected: Some
    11/18/2012 13:33 PSTUsers may be unable to place FaceTime calls. Normal service will be restored ASAP.
    http://www.apple.com/support/icloud/systemstatus/

  • Extraction and Reporting is not working in BI SYSTEM

    Hi,
            The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

    HI,
    If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
    Regards,
    Sharath

  • Self Registration and Attestation is not working in OIM 9.1.0.4

    Hi,
    i have setup a new OIM environment using OC4J. I am able to create users and provision IT resource but self registration and attestation is not working. not sure it is OC4J issue or OIM issue. For self registration it says request is submitted but when I login as xelsysadm and dlon't see any pending request and same thing happens for attestation. It dowsn't display any error but never gets completed and don't see this also in pending request list. If anybody has idea to debug the issue then let me know and thanks for help.
    Thanks,
    HC

    As per given bug it is looking for jars which is missing
    have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
    Check the document if any external jars required and same put at ThirdParty folder

  • I bought Iproxify throught app store and it does not work. I contacted the creator but I have not had any answer. What can I do to get my money back? and please take him down.

    I bought IPROXIFY throught APP STORE and it does not work. I contacted the creator and he has not answered.
    How can I get my money back? and please take him down of your page as we (users) think that we are buying products that worked backed up by MAC.
    Looking forward for an answer in order to keep buying in APP Store

    This article may clear up some confusion you may have regarding third party developers and Apple.
    The Mac App Store Discussion, what is it for?

  • I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?

    I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8.  17" MacBook Pro

    Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
    Apple IS issuing security and other updates for Snow Leopard users.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
    10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
    If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
    Most commonly used backup methods
    ..Step by Step to fix your Mac

  • I just bought a power adapter and it is not working, says "not charging".   The same for the mobile charger.   Anything I need to do in the setting?

    I just bought a power adapter and it is not working, says "not charging".   The same for the mobile charger.   Anything I need to do in the setting?

    The device is locked to the carrier it was purchased through unless you specifically purchased it as unlocked directly from Apple.
    Only the carrier to whom it is locked can authorize it's unlocking.  To do so, the user much contact them to start the unlock process.

  • I have 2 tab panels on my website and 1 is not working

    I have 2 tab panels on my website and 1 is not working one on a templet so it shows on all pages and one for some of the pages when I upload it to my server it brakes the ones on the pages  heres an exaple
    http://ol.helpmetechteam.com this is main page
    http://ol.helpmetechteam.com/computer_repair.html this is one of the pages i need to have a tabed panle set up
    I ran the test
    http://validator.w3.org/check?uri=http%3A%2F%2Fol.helpmetechteam.com%2F&charset=%28detect+ automatically%29&doctype=Inline&group=0&verbose=1&user-agent=W3C_Validator%2F1.2
    but I dont kow how to fix the error im getting I thought the doc type was right  can any one help?
    Thank you
    Aaron Dye

    You need to add the constructor for the second TabbedPanels as follows
    var TabbedPanels2 = new Spry.Widget.TabbedPanels("TabbedPanels2");
    Gramps

  • Hello sir i purchased second hand iphone4s with ios 7 beta version after 2 month on 6 oct my iphone ask for a uers id that is unknown by me my new id and password also not work when i contavt with previous owner and use his id and password which he use on

    plz help me by mail me on   [email protected]

    the previos owner id and password also not work there what i do all do everything downdrade , upgrade but everytime ask for previous id and password...........i also erase find my phone from previous user id

Maybe you are looking for