J2EE automatic restart after any restart of the hardware

Hi colleagues,
We have one J2EE system must be running 7x24h.
So if any kind of hardware restart (like data center maintenance) happens J2EE system must be restarted automatically.I found one SAP Note no : 80474 for gateway automatic restart,and i have added profile parameter in gateway and tested it, its working fine.
Is this parameter is applicable for j2ee as well?
Or is there any other procedure is available j2ee to enable automatic restart?
I could not find any notes related to this issue.
Kindly assist with this.
Thanks in advance.
Regards,
Sarath.

Satellite M645-S4050 Specifications
Satellite M645-S4050 Downloads
The best way to have gone about this would've been to use the Toshiba Recovery disks you should've made as per the directions on page 69 of your User's Guide, and then used them to rebuild your system as directed on page 72. This would've restored the Windows 7 Premium 64 edition, all your Toshiba drivers and utilties, and all the software your system orginally came with. In addition, this would've rebuilt the HDD recovery partition, making future rebuilds much faster and easier.
If you did not make a set of disks, you can still order them:
Ordering Recovery Media
If you don't have and/or are unwilling to order the disks, you should only be using the drivers/utilities from your model's Toshiba download site. The order of loading 1st the hardware drivers and hardware utilities, then 2nd the Toshiba utilities an Toshiba supplied software is critical for success. Download and install in this order:
1st Hardware Drivers and Hardware Utilities
Intel Chipset Utility
Intel Rapid Storage Technology driver
nVidia Display Driver
appropriate sound/audio driver (Realtek or nVidia)
then all other hardware drivers and hardware utilities
2nd Toshiba Utilities and Toshiba Software
Toshiba Value Added Package
Toshiba Flash Card Support Utility
then all other Toshiba Utilities and Toshiba Software
Please let us know how it turns out. Good luck.
Mike

Similar Messages

20" Widescreen display has weird lines after any movement of the cursor

there are groups of blue and red elongated dots (sets of 8) staggered horizontally on the screen, a few persistent and some that seem temporary but occur after any activity on the monitor (e.g. drag a folder or screen)
Some go away after a reboot, but reappear with new activity. Can anyone help?

I looked for you I would first go to System Preferences. Click on DIsplay you will see numbers under Resolutions go all they way to the bottom it should say 1680 X 1050 Hi light that on the 20inch Apple Cinema Displays. Next to where Display was is Color click that you flow the expert instructions
You will see only Cinema Display when done it will auto name it Cinema Display Calibrated
Check your DVI cable & GPU as could be loose
Instructions
To fix a stuck pixel
Increase your display resolution setting to the maximum supported by your screen. Launch the JScreenFix applet (below) and position the window over the stuck pixel. After 5 minutes move the window and observe the results. If the pixel remains stuck, repeat. From extensive testing, most stuck pixels are repaired in less than 20 minutes. If a stuck pixel remains after running JScreenFix for 20 minutes it probably can not be fixed by JScreenFix. You might like to try a pixel massage. Sometimes stuck pixels return after a period of time, JScreenFix deluxe can automatically repair reoccurring stuck pixels when you are not using your computer.
To reduce screen burn-in
Disable your screen saver. Launch the JScreenFix applet (below) and enter fullscreen mode. This is achieved by pressing F11 in most browsers, if this fails you will need to consult the documentation for your Internet browser. It is important that JScreenFix fills the screen fully or you may suffer additional unequal burn-in. Leave the applet running for about an hour and observe the results. If you notice an improvement, continue running JScreenFix until the burn-in is more acceptable.
Please note that completely removing screen burn-in is impossible but it will fade with time. The only way to equalise a screen image is to burn-in the parts of the screen that have had less use. JScreenFix deluxe is a preventative measure that monitors screen usage and equalises the screen when you are not using your computer.
Click on the link to launch It made my Apple Display look better
http://www.jscreenfix.com/applet.php?width=1680&height=1050
Screen burn, image retention and recalibrating pixels
Static, non-moving images left on-screen for extended periods of time can leave a "shadow” on , lcd displays (this is true of models from all manufacturers)
You are normally told to avoid extended display of static images. Games consoles can also have a negative effect on panels.
PixelProtector™ will recalibrate pixels uniformly and remove any residual effects that may have occurred.
TV channels that have a static logo permanently on screen have a real negative effect on lcd TV’s and displays. Pixels begin to memorise these images, upon switching channels you will still see the logo in the form of a shadow. After several minutes it will disappear (If not you have burn in). If 99% of the shadow has disappeared you will not notice the 1% that remains. It is the continual build up of the 1%’s that is called residual effect. Not just restricted to TV channel logos. It’s build up over months and even years will lessen the picture quality of you TV. The issues with screen burn and residual effects are far more complex however we have tried to simplify its cause and effect for obvious reasons.
PixelProtector™ can remove burn in and residual effects. It uses a wash tools that switch pixels on and off at a very fast rate (this is not in any way harmful). Included is a white wash for lesser burn in and image fix. In other words it recalibrates the pixels uniformly by removing any memory they may have.
There are different types and levels of burn in. The most severe of which occurs in the first 200 hrs of the panel's life when pixels are at there most excitable. In this time frame pixels can permanently memorise static images that have been left on screen for prolonged periods.
We have many customers who have removed screen burn from their panels by using the removal tool regularly, as per the instructions in the DVD.
In many cases it can be removed after just one session.
If the burn in is not removed first time, it will have been significantly reduced. Don’t forget it is easier to prevent burn in then it is to remove it!
Dead Pixels
Dead Pixels occur when the individual cells burn out or do not energise correctly, PixelProtector™ DVD Edition can help diagnose and in some cases re-energise dead pixels to help you get the very best out of your screen.
Many manufactures believe that 3 drop outs are acceptable. We believe even 1 drop out is unacceptable.
With plasma TV’s a dead pixel will appear black with LCD it may have only lost one wavelength and is only visible when certain colours are on screen. When you buy a new panel it is worth investing in a copy of PixelProtector DVD as some panel may have a drop out from the factory. Your best opportunity to have the panel replaced is when it is new.
User Friendly
PixelProtector™ has been developed with home users in mind. During its development stage one of the main obstacles we had to over come was insuring every one could use it (not just engineers and techno buffs). We tested the DVD on many groups of people whose feedback was invaluable in making PixelProtector™ the best product in the market.
We back up our product with full on-line support and help for all our customers.
PixelProtector™ provides a real user friendly solution to making sure your TV is performing to its full potential and that you are getting the best out of your equipment. It easy to use all you need is a DVD player! So click here https://www.pixelprotector.com/screen-cleaner.php
One of the biggest problems with monitors is most people never calibrate them and just use themstraight out of the box, a lot of people don’t even use their drivers disks. If a disk came with yourmonitor, even if it claims to be plug-and-play, use the hardware setup and install it, it gives you allthe correct refresh rates and color depths and screen resolutions possible. This allows getting themost out of the monitor while preventing damage. Also the hardware setup may create an ICCmonitor profile that Windows or the Mac OS can use with its Color Management System, ICM for Windows and ColorSync for Mac. While generally better than nothing, keep in mind it is a generic ICC profile, it can only assume average ambient conditions that are not likely to be yours
Common issues with LCD screens include:
Trailing or blocking effect on screen (pixilation)
Pixel drop out
Unnatural image blacks are dark grey
How PixelProtector™ can help resolve these issues:
Trailing can bee seen on some panels when bit rate levels are high.
High bit rate levels are normally reached when watching fast action scenes in movies or programs, the image starts to trail or lag and even blocking in some cases.
PixelProtector™ will help to minimize or even eliminate trailing buy calibrating your panel correctly and insuring you have the right settings and connection in place.
Pixel drop outs are one of the most frustrating of issues for anyone who has an LCD. When a screen suffers from pixel drop it can be fixed in some occasions. If the whole pixel is dead then nothing can be done to fix this. If one wave length has gone in the pixel i.e. blue. This can in some cases this can be fixed by recalibrating pixel color production using PixelProtector™.
We have a 4 in 10 chance of fixing the problem.
The DVD will highlight if the whole pixel is dead or if one wave length has gone.
One of the biggest issues LCD’s have is producing pure black. LCD panels produce a pure white light and then subtract the colors that are not required. So to produce black is difficult, making sure that you first calibrate its black and white setting is essential to minimize this issue and get the best from your panel PixelProtector™ includes specific tests and adjustment screens for this purpose.
I know Apple has help me in the past by telling me to make a 100% White pure white screen saver overnight.
I hope I was of help.

Have Operating System 10.6.8, Mail Program 4.6. How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help

Adobe Reader IE plugin (11.0.04 - .06) is automatically deleted after first restart

Hi all
I have discovered a strange bug (as I like to call it). Since Adobe Reader version 11.0.04 (now we have 11.0.06) there is problem with IE plugin.
When I install it - everything is working and from IE I can succesfully open pdf files. But when I restart computer after Adobe Reader installation, all plugin files are missing (like they are automatically deleted) from C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX folder. And ofcourse IE plugin is not working any more.
Workaround is when AFTER first computer restart I manually copy all plugin files to that folder or repair Adobe Reader installation - then files are not being deleted any more. As I said, it is very strange problem.
However this workaround is not acceptable to me because I have lots of computers where I need this software to be installed.
Have anybody seen this problem and know how to fix this? Other browser (firefox, chrome) plugins are working correctly after fist restart. This problem is with Windows 8.1 / IE11 and Windows 7 / IE9
In Adobe Reader version 11.0.03 everything is working and after first restart plugin is not being automatically deleted.

Hi
No, it's not an antivirus software, because same thing happens in clean windows 7 system (without any antivirus or other specific software). And like I said, it started with version 11.0.04 - earlier versions are OK.
Also not only IE plugin files are gone after first restart but also Adobe Reader shortcut in Start Menu. Adobe Reader itself is working.
After first restart and repairing Adobe Reader installation - these files are not being deleted any more. It is not helping if I do repair after installation and before first restart. The thing is, only first restart after installation always deletes these files.
I looked everywhere in Windows (registry, startup, scheduled tasks) where might be some clue what is deleteing these files - didn't find anything.

I-photo has been working brilliantly until after my last update. Now it automatically closes after 10 seconds. The warning box appears but offers no solution. I have reloaded the software, but this has made no difference. Has anyone else experienced this

I am having problems with i-photo. It automatically closes after 10 seconds. the warning box gives no guidance. Anyone else had this problem?

What "warning box"?
Assuming you're using iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Finder restarts after trying to open the documents or desktop tab

Hello!
I've got a MBA 13, 128Gb mid 11 with Lion on it. That's my first Mac so I'm new to it. The problem is in Finder. There are a few tabs in a left side it (My files, AirDrop and others). But I can't open Documents or Desktop tabs. If I try to do it, Finder restarts. Anyone's got any idea about it?
Thank you!

Go to ~/Library/Prefereces
Move these files to the Trash.
com.apple.finder.plist
com.apple.sidebarlists.plist
Then restart your Mac.
~ (Tilde) character represents the Home folder.
For Lion: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Sound 'out' is reset to "Internal speakers" after any restart.

I'd prefer it would stay assigned to "line out" but this won't happen. Has anyone experience with this mystery?

Sound out reverts to internal speakers at every shut down
Sound output reverting to internal speakers after restart

My ipod 4 will not turn on, charge or connect to itunes/computer. nothing has happened to it to cause any damage to the hardware.

i have n ipod 4th geration. it has no hardware damage or water damage. it will not turn on, charge, or connect to itues/computer. my computer will not even pick up any hardware connection when i plug it in. the screen stays black. ive tried holding the power and home button then letting go of the power button but nothing seems to be working. someone please help.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod went in the wash for 40 minutes and the screen was crushed. i immediatly put it in a baggie of brown rice. is there any hope for the hardware? (i know i need a new screen)

can it be saved? i know the rice thing has worked for other people but the bottom have of the screen is in basically small fragments so it probably got extra wet...

If you take or send it to Apple for the broken screen, they will replace your iPod (for a significant price) with an equivilant refurbished model. It doesn't matter what else is wrong with it.

I cannot install Firefox for Android on HTC Desire (Froyo) via Android Market, as the download keeps restarting after reaching 60-75 % (around 7-8 MB out of 13.84 MB). Any help?

The download in Market restarts after some time. The notification bar displays download % as if the previous download is still in progress. That is, first time the download started, notification bar shows correct %. At around 70%, the download inside Market app starts again from 0 KB, and the notification bar shows avergae of the two downloads(35% when download in Market is 0%, 40% when download in Market is 10%).
This second download again disappears from Market, and a third begins, no error message nor any other warning is displayed. This time the notification bar shows average of 3 downloads!
No idea what is happening, this is my first time downloading firefox for mobile.

Sorry, I don't know why the Market app is failing to complete the download.
If it is still not working, you could try the FTP server link on this page, and see if it works any better:
https://wiki.mozilla.org/Mobile/Platforms/Android
You could also try downloading Firefox to your computer using that FTP link, and then search for instructions on how to "sideload" the app onto your phone over USB.

My phone freezes, refuses to open some applications some times, switches off and restarts by itself... any idea what the problem is?

I am using iPhone 5 (iOS 7.1.2). It often switches off and restarts by itself, sometimes it refuses to open certain applications until I switch off and restart it. Sometimes it does not make a call through unless I switch off and restart.
Any idea what the problem could be and any advice to what I should do ?

Hi jallam,
If you are having issues with restarting and apps not launching you may want to try this to troubleshoot.
Since restarting has not helped, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for using Apple Support Communities.
Best,
Brett L

Ipod Touch keeps restarting after "red slider" shutdown...and other issues?

Hi There...I'm considering returning my Ipod Touch and thought I'd see if anyone else was experiencing similar issues before I do anything drastic. I purchased a second generation Ipod Touch in December (2.2.1 update) and everything seemed to be working well for a while. I guess it was sometime in January that I noticed my ipod restarting itself after shutdown (red slider)...almost every single time. I simply CAN NOT shut down my ipod when I want to. It does shut down temporarily, then...sometimes seconds, sometimes minutes later...it restarts on it's own.
I've reset all settings, and I've tried turning off wifi (which seemed to work temporarily), but now it's doing it again. I've heard that if you continue to hold down the sleep/wake button while you slide the red slider to "off" it will cause the ipod to restart...so I'm wondering if maybe there's something wrong with the button? Sometimes it seems like if I fiddle with the button (pulling up on it and such), it will allow me to shut it down...but this could be coincidence. I've seen a posting on another mac forum outlining a similar problem but there were no replies. Can anyone offer any other suggestions?
Also, I've been experiencing volume issues with my Ipod...sometimes there's just no volume while songs, youtube videos, etc. are playing. The "progress"(?) bar shows that audio/video is playing, but there is no sound (and yes...the volume is turned up). Seems to happen most often when the headset is plugged in...but that's how I use it most of the time. I do hook it up to an older tuner/amp with a 1/8" to RCA Y-cord, and with a 1/8" - 1/8" cord in my truck and it's cut out then as well.
Both problems seem to be getting worse I only have a few apps on the Ipod (aside from music, podcasts, and some mp4 video) and can list them if anyone thinks this might be the issue. I'd really appreciate any suggestions.
Thanks,
M.P.

Thanks for your input, but as far as I understand, this restarting issue is definitely not normal for the Ipod touch. Nowhere online or in the provided literature does it say that the ipod is supposed to automatically restart after shutdown. Ignoring the problem by not shutting it down at all is like saying your broken car is fixed because you're not going to drive it anymore! LOL!
Anyhow, this is a relatively small problem now compared to the volume issues which are occurring with greater and greater frequency. It's gotten to the point where I can no longer even listen to a full song from the album I just bought from itunes! This "cutting out" occurs with and without (listening through internal speaker) headphones attached (several different pairs tested) and while hooked to an audio tuner with a high quality cable. I've blown out the jack on the ipod with compressed air to dislodge any possible dust or debris, and have followed the trouble shooting procedures as outlined in the apple support document. The symptoms lead me to believe that this is not so much simply "a volume issue" as it is a symptom of a much larger problem. The volume slider has now started to jump around on it's own after the volume has cut out, and the song continues to play. I have experienced so many problems (not all listed hear) and have heard so many complaints about the ipod touch, that I'm starting to seriously reconsider my purchase...and I'm a huge Mac fan! I haven't abused my Ipod...if anything I'm over cautious with it.
Could this be software related? Something that will be sorted with an update in a few weeks time?Has anyone experienced or successfully resolved any of the issue that I've listed here - or am I on my own? I'm guessing maybe I should just bring it back...
Best,
M.P.

Music on hold restart after prompt

Hey all,
is there a way to have the MOH continue to play or pause the track, play a prompt, and then continue playing where it left off?
At the present time the MOH restarts after every prompt places the contact back on hold.
ccx express version is 5.0(2)SR02_Build04

Hi,
The only configuration on UCCX related to MoH is the Audio Source selected on the CTI Port for the User Hold Audio Source and the Network Hold Audio source. Each time the UCCX script puts the call on hold, the audio stream gets connected to the MoH source on the CUCM or MoH server. UCCX doesn't control what MoH is played to the caller though beyond the device configuration when the CTI ports are being created.
I believe a fixed MoH Source would address this. Just as a heads up, The multicast option for MoH is not a supported feature with CTI devices like UCCX ports, as it can lead to transfer issues in some cases.
Here's a thread I came across on the IPT forum that discusses MoH restarting each time a call is put on hold.
https://supportforums.cisco.com/thread/301999
Thanks,
Brendan

How avoid restart after installing JMF ?

if i make my audio and video chat using JMF
is it necessary to install JMF and make restart on client pc?
i don t want to disturb user
is it away for avoiding installing all JMF or just avoid restarting after installation
really need the answer
thanks

You dont have to restart your computer. You can just copy all of the JMF-dlls to your application folder and use the file in the classpath. It depends what type of application you create. If you have an applet the dlls have to be copied to one of the PATH-Folders of your system (eg windows/system). For a standalone-app just have the dll's in your app folder and include . in your classpath.
To be able to use video/audio-devices at startup you have to call the corresponding Auto-Classes of jmf.jar like new VFWAuto() once to register all available devices in the jmf registry.
How this corresponds to the JMF-license is however a different story. I dont know if you are allowed to circumvent the JMF-Installer this way. But you could inform the user that a restart is not necessary before starting the JMF-Installer....

Automatic Syndication after impot

Hi all,
my scenario is as followed:
My repositories imports updates (new data sets and updates on existing) automaticly via the import server. This updates should be syndicated, but only the updates. Not all data sets. My idea was to create a boolean field "updated" which should automatically be set to true after a import. The syndication map selects only data sets, which are set to true - export via the syndication server.
On this background I have some questions:
How can I automaticly assign new values after the import (changed to true)?
How can I automaticly assign the false value to "changed" after the syndication.
Is there an other solution to export only changed data sets.
How can the syndication process be automaticly started after any event, e.g after an update, instead of the syndicatoin server?
Thanks
Stefan

Stefan,
1. How is your Import map set? - One single map for "Update" and "Create"?
If you have two separate maps, you can set the Boolean value for your "Updated" field in the Import map itself. If you are using a single map, how about splitting it into two just to accomodate this update...:). Then you can change your syndicator map to pick records based on the flag.
2. Currently (as of SP3), Syndicator will not send back any information on the syndicated records, hence I don't think it is possible to directly update a field based on "Syndication".
3. If you are using Import Manager in Batch mode, you can execute your Syndicator batch command as soon as your Import Manager Batch job is finished. If you are using Import Server, you can think of utilising OS level events/commands that check for the "Ready" and "Status" folders and execute your Syndicator batch command once the Import Server complates the operation.
Hope this helps,
Regards,
Rajani Kumar

J2EE automatic restart after any restart of the hardware

Similar Messages

Maybe you are looking for