J2EE config tool not opening up

hi All,
We have just installed WAS ABAP+Java 6.4 and its working fine.
We are able to open J2EE server page also by using http:
<Host>:50000 also
but we stuck up while activating SLD the problem is we are not able to run configtool.bat from usr/sap/<instance><j2ee>configtool.
when we couble clicked on configtool.bat then in the cmd prompt it says "program terminated abnormally"
Can you please help us out in this
thanks in advance
waiting for your expert inputs.
rgrds......
Gaurav

hi christophe,
i checked the setting
and i found that JAVA_HOME is correct and launcher.jar file is also present in configtool folder
i checked out java -version and its displayed the version no i.e. 1.4.2_11 also
<Drive>:/usr/sap/<SID>/<instance><no.>/j2ee/configtool in this lib is also present with everyone rights
and we also set the path for the launcher.jar file but still we are getting the same problem
Also, rt.jar is present in JAVA_HOME/jre/lib
so please suggest any solution and tell me if anything else needs to be checked and also tell me about Visual administrator where do i find that from whr i should run that
thanks &regards.......
Gaurav

Similar Messages

Error during installing of OATS 9.3 and OAT db config is not opening

Hi ,
When i was installing OATS 9.3 i am getting this error
"Error in Writing to File
c:\OracleATS\jdk\jre\bin\awt.dll (The process cannot access the file because it is being used by another process)
I ignored this error .
Oce the install is completed ,i tried to open Oracle Application Testing Database Configuration it didn't open and gave this message
"error could not open file C:\OracleATS\jdk\jre\lib\i386\jvm.cfg "
Can you please advice me on this
Regards
Sridhar

Proper clean fresh ATS install:
Step1: Deinstall ATS products
Setup.bat to launch "Oracle Universal Installer"
Click "Deinstall Products". Inventory Window opens.
Expand the tree Oracle Homes -> Check "OATS" checkbox. Click Remove.
Remove window opens and start uninstallation. Wait for the dialog to automatically dismiss itself.
After the successful uninstalltion, you will see "There are no installed products" in the Inventory window.
Click "Close" to close the Inventory Window.
Click "Cancel" to close the Oracle Universal Installer
Step2: Uninstall Oracle XE database
Control Panel -> Program and Features. Find and select Oracle Database 10g Express Edition
Click "Uninstall/Change" button from the tool bar, or dbl click the item to lauch the installsheild wizard.
Click "Yes" on the pop up dialog. Wait for the unistallation to complete.
Upon successful uninstalltion, window shows "Uninstall Complete" in the screen.
Click "Finish" to close the install shield wizard
Step3: Remove/Rename the following folders.
Backup the script directory
Remove/Rename ATS install directory (e.g. C:\OracleATS).
Remove/Rename the directory: C:\Documents and Settings\username\osworkspace
(depends on your Operating System, it may look like: C:\Users\username\osworkspace)
Remove/Rename the directory: C:\Program Files\Oracle\Inventory
( depends on your Operating System, it may look like: C:\Program Files (x86)\Oracle\Inventory)
C:\Windows\rsw.ini
Step4: Remove the Services (Optional)
Start -> Run. Enter "cmd" Type the command: sc delete servicename
eloadAgentMon
Oracle Application Testing Suite Application Service
If you see a msg "The specified services does not exist as an installed services" returned from the program, the service has successfully removed by the previous steps.
Step5: Remove the Registry Keys (Optional)
Start -> Run. Enter "regedit" to launch Registry Editor. Remove the keys below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle Application Testing Suite Application Services
HKEY_LOCAL_MACHINE\Software\Oracle\Oracle Application Testing Suite and Oracle Test Management
If you do not find the keys they are successfully removed by the previous steps. Note: The keys may be found in the different location depends on your Operating Systems. (search by the key to find the correct location)
Step6: Restart your System (Optional)
Not required, but always a better practice
Step7: Install ATS
1. Make sure the install user has administrator privilege on the system.
2. Double click the setup.bat to start the Oracle Universal Installer.
Important: Windows Vista, 2008 or Win7 users, select"Run as Administrator" from the right mouse click menu. This is required process for the OS that has UAC enabled.
3. Continue to install the latest version of ATS

SCCM Client Report Tool not opening up correct URL to Report Server

I recently install the SCCM 2012 right click tools and within the downloaded zip file there is SCCMClientToolsSetup2012.exe which adds a whole bunch of additional features when right clicking devices in the console. The problem is no matter what I put as
the Report Server while doing the install, it never opens the reports for the device... It gives me the following error:
Server Error in '/ReportServer' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it
is spelled correctly.
Requested URL: /ReportServer/Pages/ReportViewer.aspx
I have changed the report server virtual directory to match ReportServer from the default, but it still does not open the reports... Any idea what could I might be wrong?
I have the console and right click tools installed on my Windows 7 workstation. the Server is Windows 2012 Datacenter with SQL 2012 and SCCM 2012 R2.
Thanks!
Tony

Yes, it appears to work directly from the console and via web... But it does show Report.aspx vs. ReportViewer.aspx.
Hi,
Did you open reports from Web Service URL in Reporting Services Configuration Manager?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OBIEE 11.1.1.7, Win 8, Admin tool not opening.

Dear Experts,
I have recently installed OBIEE 11.1.1.7, on windows 8, 64bit, I3 processor and 6 GB ram configuration.
Installation is successfull, i can login all console,em, answers etc.
Only issue is Administration tool to manage to RPD is not opening. It just pops up the CMD windows and then stays there at it is.
No further progress after that.
Could you please let me know, since it's in my home laptop, can i install OBIEE client separately in the same machine in which server is installed?
the whole installation seems to be useless if i can't edit RPDs.
thanks.

I did a deinstall, and installed whole OBIEE 11.1.1.7 again. This i time noticed while installing it i had to run the installation wizard in compatibility mode.
And the windows version this wizard was comfortable was windows XP.
Also during installing it, at one of the initial stage it showed an error of operating system certification but i opted to ignore and continue with the installation.
It went through all the configuration steps too.
but again not able to find how to load Admin tool. I know for sure there is one condition in which the tool loads and works fine but not sure what is that.
any help will be greatly appreciated.
thanks.

Oracle Net config assistant not opening on windows.

Hi,
I installed Oracle 9i server on a windows XP machine on Friday, 2nd December. I configured the listener service, netconfig name and my application was up and running.
Today I wanted to make some changes in the listener service; but the net config assistant window is not coming up. New processes launch.exe and jrew.exe are starting in the background with each attempt to launch.
I made sure I am logged in as the same user which installed Oracle on the machine(having ORA_DBA privilages), gave the full control privilages to this user. But the net config assistant is still not opening up.
Could anyone help in this regard.
Thanks
Puneet

Has anyone of you seen this problem before??
Kindly reply asap.
Thanks

Template config tool not working

hi,I have installed netweaver 2004ssr2 with as abap and as java, my java is engine is started.... when I double click on template config tool,it is saying that path could not found.....
not only template config tool but all other tools are saying the same thing.....can anyone help me in this issue....

hi,I have installed netweaver 2004ssr2 with as abap and as java, my java is engine is started.... when I double click on template config tool,it is saying that path could not found.....
not only template config tool but all other tools are saying the same thing.....can anyone help me in this issue....

SAp J2ee Engine-Could not open MMC: error"could not open libsapu16vc71.dll"

Hi,
When I am trying top open MMC console to start the server getting an dialog box error "Could not open libsapu16vc71.dll". If I click OK its terminating.
Any body have idea where I need to check the logs regarding this?
please check this and help me.
Thanks
Venkat.

Hi,
Check following link.
[Re: Can't access MMC;

No JVM Settings TAB (SAP J2EE Config Tool )

Hi ,
There should be 4 tabs in the instance properties ( of the Config Tool).
But the config tool that i am using has only 3 , <b>there is no tab for JVM settings( Java Virtual Machine ) in the instance properties ( of the Config Tool).</b>
is there some way ( Setting) to enable it???
Thanks,
Sushil.

Yippeee!!! i got the answer
FYI : there is no seperate tab for JVM Settings... it is in the general server tab

OBIEE Administration tool not opening in windows 8.1

Hi,
I have Windows 8.1 64-bit machine installed. I installed OBIEE 11.1.1.7 and the Admin tool doesn't open forever. I read somewhere installing 32 bit version works on windows 8.1. How true is that ? Or OBIEE is completely not compatible with windows 8.1 ?
Any recommendations/solutions would be greatly appreciated.
Thanks,
Vinoth

Hi,
If you look at the compatibility matrix you can see the Admin tool is only supported up to Windows 7, there is no official support for Windows 8 / 8.1 on the current version (new versions will maybe introduce it).
I also read somewhere the 32bit version works, but I also read it was extremely slow when opening (10-15 minutes) and no guarantee everything works.
In the end the best solution is probably to run it in a VM for now waiting for new releases.

Alert Inbox and Alert Config does not open in RWB

When I open RWB I am not able to open Alert Inbox and Alert Configuration links. Its says " Internet Explorer cannot display the webpage" . When I exequte the command ALRTINBOX from Abap stack, it opens the Alert Inbox page.
Can someone tell me if there is any setting that I need to change in my Internet Explorer. I even tried using Mozilla, but same issue. My team members are able to open these links, hence it may be some setting on my machine.

Hi Chiraj/ Navneet,
Thanks for your reply, I have already tried these setting and my team members are able to login from their comps. Also i have tried using SUPER USER id which has all access, still the same issue. Hence I believe it is an issue with Internet Explorer setting.
Thanks
Vineet

Admin Tool Not Opening In Windows 2003 x64

Hi Everybody ,
I installed OBIEE 11G on Win 2003 x64 bit OS, Everything went well but the admin tool is not starting . After a search in a forum I comes to know that Admin tool wont support for x64 bit . Can any one suggest me how to start Admin tool in Win 2003 x64 bit OS .
Thanks In Advance ,
Qujes

Hi,
Check this : Admin tool crash
Regards,
Srikanth

Config tool not launching

Hi ,
We have a windows box oracle Db and EP 6.0.When i click on configtool.bat.I don know why it is not able to launch the gui.ANy reason?Thanks in advance.

Hi,
If you are logged in as Administrator, still you can run configtool as SIDadm..
Here is the way...
1. Open Command Prompt.
2. type "runas /user:sidadm cmd"
3. It will open new command prompt, which is running in the previledges of SIDadm.
4. step in to the configtool directory and run "configtool.bat"
Regards.
Rajesh Narkhede.

J2EE engine does not start correctly

hi,
after the installation of sap was v6.40 abap & j2ee, i cannot logon to the j2ee engine as described in the documentation. when i will access the engine by using a web browser, i get the following error message:
"503: Service Unavailable"
i had a look on the log files and found these messages in the server log file:
java.rmi.RemoteException: Error occurred while starting applications; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Container EJBContainer is not active at the moment and it is not possible to startApp sap.com/com.sap.lcrabapapi.
at ...
there are more lines with error messages which seems to belong to the original problem with the ejbcontainer.
can anyone tell me how to fix the errors?
thanks in advance,
michael keller

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

Secure store lib dir does not exist - unable to open config tool

Hi we are using NW 7.0 with windows 2005 (AS java).
when i click on configtool in central instance it says
Error occured while working with configuration( scanning)
Msg: Error occured : secure store lib Dir does not exist :
server\sapmnt\SID\SYS\global\security\lib\tools
please suggest
Thanks
KK

HI ,
Was config tool working earlier?
Please check if direcories sapmnt & saploc exist are you are able to access them.Check permission on it.
May be your windows server got patched and some security policy got changed.Worth a revisiting and checking.
Other thing you can try is take a backup of bootstrap.properties file and modify the location of library from
server\sapmnt\J2EE\sys\global\security\lib\tools to \usr\sap\J2EE\sys\global\security\lib in the bootstrap file.
Regards,
Ashutosh

J2ee error--Could not login to config tool

hi,
the J2ee instance in my SAP Server is not running.
The SAP Server is of the following configuration.
OS: AIX
Installation: AS-ABAP + JAVA
Database: Oracle
My ABAP instance is running. ABAP and JAVA are runnning on different schema
When i try to connect to config tool , I am getting the following error. Please guide, of if you have faced a situation before
Connecting to database ... java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.lang.NoClassDefFoundError: iaik.utils.Base64Exception
        at java.lang.J9VMInternals.verifyImpl(Native Method)
        at java.lang.J9VMInternals.verify(J9VMInternals.java:59)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:120)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:108)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
        at com.sap.engine.configtool.console.ConsoleConfigTool.loadClusterData(ConsoleConfigTool.java:97)
        at com.sap.engine.configtool.console.ConsoleConfigTool.<init>(ConsoleConfigTool.java:53)
        at com.sap.engine.configtool.console.ConsoleConfigTool.main(ConsoleConfigTool.java:1279)
        ... 6 more

Hello Balaji,
The ClassNotFoundError is complaining about class Base64. This class is part of the util.jar library which can be found in the following location:
./j2ee/configtool/lib/util.jar
Please verify that this library file is present. If it is, please verify that the file is not corrupt by executing the following command:
jar -tvf util.jar
With the above command you should see the contents of the archive.   One of the classes should be Base64.class.
If necessary you can redeploy the configtool.sda archive which is located under
.\SDM\root\origin\sap.com\com.sap.engine.configtool\SAP AG\<#>\<version_info>\configtool.sda.
Use SDM to redeploy the archive using option 'Update SCAs/SDAs that have any version' under the deploy tab.
Regards,
Nathan

J2EE config tool not opening up

Similar Messages

Maybe you are looking for