J2EE DB Distributed Install - SAPINST DIES (service resolution error?)
I am installing a Distributed JAVA system. When I get to the DB install step, SAPINST dies. I see the following error in the logs. Any ideas?
WARNING[E] 2005-11-02 18:46:34 [syxxcnamrs.cpp:128]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByName(const iastring& serviceName, const iastring& protocol) const
Error converting from service name=sapmsQP2/protocol=tcp to port number. SAPRETURN=12
Hi Nick
The install master CD that did not work for installing the EP 6.0 J2EE dialog servers is
ORACLE:WEBAS:6.40:SAPINST:SAP Installation Master CD Oracle:I386 LINUX_32 AIX_64:CD5102xxxx
The EP 6.0 SR1 CD worked fine - we used the CD with the following label:
SAP:ROOT-LABEL-NW04SR1:640-2:MASTER-CD:*:I386 IA64 AIX_64 DEC_64 HP11_64 HPIA64 SUNOS_64 LINUX_32 LINUXIA64_64 S390X_64 OS390_32 AS400:D51030843
Thanks for your help, Tony.
Similar Messages
-
Management Server (MGMT01) is running SCVMM 2012 R2 on Windows 2012 R2
It's currently managing 2 Hyper-V hosts:
SRV01 is running Windows Server 2012 R2 - Hyper-V Core
SRV02 is running Windows 2008 R2 Standard with the Hyper-V role
SRV02 is going away eventually, so currently moving VM'S TO SRV01.
I was able to migrate the VM without issue but when attempting to install the guest services; I get the following error:
Error (2927)
A Hardware Management error has occurred trying to contact server MGMT01.DOMAIN.LOCAL :w:InternalError :HRESULT 0x8033811e:The WS-Management service cannot process the request. The WMI provider returned an 'invalid parameter' error. .
WinRM: URL: [http://MGMT01.DOMAIN.LOCAL:5985], Verb: [INVOKE], Method: [CreateUrlGroup], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsCompactServerUrlGroup]
Unknown error (0x8033811e)
Recommended Action
Check that WinRM is installed and running on server MGMT01.DOMAIN.LOCAL. For more information use the command "winrm helpmsg hresult" and
http://support.microsoft.com/kb/2742275.
WinRM is running on MGMT01 and I'm running the VMM console as a domain admin. Firewalls have been disabled on management server and both hosts.
What else should I be looking at?I attempted to create a new VM and was met with the same error but I'm able to create a VM using Hyper-V manager.
-
Error while installing Adobe Document services
Hello,
am getting following error while installing Adobe document services on HP-UX system. The portal version is EP 6.0 SP 11.
AdobeDocService/DVD_NW_04_SR1_NetWeaver_Components/ADOBE/ADOBEGEN/OFFLINE/ADSSAPOFF.sca' does not exist.
Jun 27, 2005 1:59:50 PM Error: Processing error. Return code: 4
i HAVE ALREADY CHECKED AT THE ABOVE LOCATION & THE FILE DOES EXISTS AT THAT LOCATION.
Regards,
Sunil Kulkarniis this problem resolved ? - this seems related to DB/OS (e.g., if largefiles not enabled then the datafile cannot grow beyond 2GB and file resets)
or something like that which SAPinst is not equipped to handle and does not give a better error message
the system.log in the sapinst_instdir may have some clues
Birdie -
Installing Adobe Document Services
We are in the process of installing Adobe Document Services and we are on ECC6.0 system. I have question is there any requirement that we need to upgrade our ECC system from Ecc6.0 to SAP ERP 6.0 EHP4 .
======== component information===========
software Compon Release Level Support Package
SAP_BASIS 700 0009 SAPKB70009
SAP_ABA 700 0009 SAPKA70009
PI_BASIS 2005_1_700 0009 SAPKIPYJ79
ST-PI 2005_1_700 0002 SAPKITLQI2
SAP_BW 700 0009 SAPKW70009
SAP_AP 700 0006 SAPKNA7006
SAP_HR 600 0007 SAPKE60007
SAP_APPL 600 0006 SAPKH60006
EA-IPPE 400 0006 SAPKGPID06
EA-APPL 600 0006 SAPKGPAD06
EA-DFPS 600 0006 SAPKGPDD06
EA-HR 600 0007 SAPKGPHD07
EA-FINSERV 600 0006 SAPKGPFD06
FINBASIS 600 0006 SAPK-60006INFINBASIS
EA-PS 600 0006 SAPKGPPD06
EA-RETAIL 600 0006 SAPKGPRD06
EA-GLTRADE 600 0006 SAPKGPGD06
ECC-DIMP 600 0006 SAPK-60006INECCDIMP
ERECRUIT 600 0006 SAPK-60006INERECRUIT
FI-CA 600 0006 SAPK-60006INFICA
FI-CAX 600 0006 SAPK-60006INFICAX
INSURANCE 600 0006 SAPK-60006ININSURANC
IS-CWM 600 0006 SAPK-60006INISCWM
IS-H 600 0006 SAPK-60006INISH
IS-M 600 0006 SAPK-60006INISM
IS-OIL 600 0006 SAPK-60006INISOIL
IS-PS-CA 600 0006 SAPK-60006INISPSCA
IS-UT 600 0006 SAPK-60006INISUT
SEM-BW 600 0006 SAPKGS6006
LSOFE 600 0006 SAPK-60006INLSOFE
=============================================================================
Also little confuse between Ecc6.0 and ERP6.0 . Is ERP6.0= ECC6.0 .Hi Andi,
Sap application server is application platform for all other component which provide the platform to deployment of other Component. As you are deployment ADS into the system.
Sap Aplllication server----
Sap Application server JAVA (J2EE engine )
Sap application server Abap (Abap engine)
To deploy the ADS you require java engine . -
Hi all, when installing SAPinst I am receiving an error saying:
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:47:16
FJS-00012 Error when executing script.
I have also copyed the SAPinst.log file below. please any suggestions.:
SAPINST.LOG file copy:
INFO 2006-09-20 08:23:59
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2006-09-20 08:24:20
The 'saploc' share exists at directory 'E:\usr\sap'. Choosing drive E: as SAP System drive.
INFO 2006-09-20 08:24:26
Copying file F:/Others/ker/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2006-09-20 08:24:26
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2006-09-20 08:28:33
Copying file D:/2/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2006-09-20 08:28:33
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2006-09-20 08:28:34
Copying file system node D:\2\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2006-09-20 08:28:34
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2006-09-20 08:28:34
Copying file D:/2/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2006-09-20 08:28:34
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2006-09-20 08:28:34
Copying file system node D:\2\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2006-09-20 08:28:34
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2006-09-20 08:28:39
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2006-09-20 08:28:39
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2006-09-20 08:28:39
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2006-09-20 08:36:34
Package table created
PHASE 2006-09-20 08:37:48
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2006-09-20 08:37:49
SAP Web Application Server
PHASE 2006-09-20 08:37:49
Request common parameters of SAP System
PHASE 2006-09-20 08:37:49
Create operating system accounts
INFO 2006-09-20 08:37:49
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2006-09-20 08:37:49
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2006-09-20 08:37:49
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2006-09-20 08:37:49
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2006-09-20 08:37:49
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2006-09-20 08:37:49
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2006-09-20 08:37:49
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1005 ACCOUNTNAME=dll\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2006-09-20 08:37:50
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1006 ACCOUNTNAME=dll\SAP_C11_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2006-09-20 08:37:50
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1007 ACCOUNTNAME=DLL\SAP_C11_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2006-09-20 08:37:50
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1009 ACCOUNTNAME=ORA_C11_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2006-09-20 08:37:50
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1010 ACCOUNTNAME=ORA_C11_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2006-09-20 08:37:50
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2006-09-20 08:37:52
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1011 ACCOUNTNAME=DLL\c11adm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=DLL\SAP_C11_GlobalAdmin,DLL\Users,Administrators,ORA_C11_DBA,ORA_C11_OPER,dll\SAP_LocalAdmin,dll\SAP_C11_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2006-09-20 08:37:53
Changing account ACCOUNTID=S-1-5-21-1614895754-789336058-725345543-1012 ACCOUNTNAME=DLL\SAPServiceC11 ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=DLL\SAP_C11_GlobalAdmin,Administrators,ORA_C11_DBA,ORA_C11_OPER,dll\SAP_LocalAdmin,dll\SAP_C11_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2006-09-20 08:37:53
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2006-09-20 08:37:53
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:54
Request operating system user information
PHASE 2006-09-20 08:37:55
Request operating system user information
PHASE 2006-09-20 08:37:55
Request operating system user information
PHASE 2006-09-20 08:37:55
Request operating system user information
PHASE 2006-09-20 08:37:55
Request operating system user information
PHASE 2006-09-20 08:37:55
Request operating system user information
PHASE 2006-09-20 08:37:55
Request operating system user information
INFO 2006-09-20 08:37:55
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1614895754-789336058-725345543-1003' on host 'dll'!
INFO 2006-09-20 08:37:55
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1614895754-789336058-725345543-1003' on host 'dll'!
INFO 2006-09-20 08:37:56
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1614895754-789336058-725345543-1003' on host 'dll'!
INFO 2006-09-20 08:37:56
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2006-09-20 08:37:58
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:37:58
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:37:59
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:00
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:00
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:01
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:02
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:03
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:03
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:04
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:05
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:05
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:06
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:07
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:08
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:08
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:09
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:10
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:10
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:11
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:12
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:13
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:13
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:14
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:15
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:15
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:16
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2006-09-20 08:38:17
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2006-09-20 08:38:17
Adapt filesystem
PHASE 2006-09-20 08:38:17
Prepare check/adapt SAP instance filesystem
INFO 2006-09-20 08:38:18
File system node E:\usr\sap exists.
INFO 2006-09-20 08:38:18
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap/C11 exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap/tmp exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/data exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/log exists already. Nothing to do.
INFO 2006-09-20 08:38:19
File system node E:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2006-09-20 08:38:19
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2006-09-20 08:38:19
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2006-09-20 08:38:20
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
PHASE 2006-09-20 08:38:20
Extract archives
INFO 2006-09-20 08:38:21
Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
PHASE 2006-09-20 08:38:21
Extract SAP System kernel archives
WARNING 2006-09-20 08:38:23
PROBLEM: 'SAPCAR' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
INFO 2006-09-20 08:38:23
Creating file C:\SAPinst ORACLE KERNEL\SAPMMC.SAR.log.
INFO 2006-09-20 08:38:24
SAPCAR -xvgf F:/Others/ker/NT/I386/MMC/SAPMMC.SAR, -R C:\SAPinst ORACLE KERNEL succeeded. (See output in './SAPMMC.SAR.log'.)
INFO 2006-09-20 08:38:25
While copying node C:\SAPinst ORACLE KERNEL/sapmmc.dll to C:\WINDOWS\system32/sapmmc.dll: source is not newer than the target. Nothing to do.
INFO 2006-09-20 08:38:25
While copying node C:\SAPinst ORACLE KERNEL/sapmmcada.dll to C:\WINDOWS\system32/sapmmcada.dll: source is not newer than the target. Nothing to do.
INFO 2006-09-20 08:38:25
While copying node C:\SAPinst ORACLE KERNEL/sapmmcdb6.dll to C:\WINDOWS\system32/sapmmcdb6.dll: source is not newer than the target. Nothing to do.
INFO 2006-09-20 08:38:25
While copying node C:\SAPinst ORACLE KERNEL/sapmmcinf.dll to C:\WINDOWS\system32/sapmmcinf.dll: source is not newer than the target. Nothing to do.
INFO 2006-09-20 08:38:25
While copying node C:\SAPinst ORACLE KERNEL/sapmmcms.dll to C:\WINDOWS\system32/sapmmcms.dll: source is not newer than the target. Nothing to do.
INFO 2006-09-20 08:38:25
Processing of all file system node operations of table t_SAPComponent_Archives_Copy_SHARED succeeded.
WARNING 2006-09-20 08:38:27
PROBLEM: 'SAPCAR' not found. CAUSE: Unable to find application via absolute path in filesystem. Application could perhaps be found using environment variable path or is really missing. Trying to call the application nevertheless.
INFO 2006-09-20 08:38:27
Creating file C:\SAPinst ORACLE KERNEL\DBATOOLS.SAR.log.
INFO 2006-09-20 08:38:29
SAPCAR -xvgf F:/Others/ker/NT\I386\DBATOOLS.SAR, -R E:\usr\sap\C11\SYS\exe\run succeeded. (See output in './DBATOOLS.SAR.log'.)
INFO 2006-09-20 08:38:30
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2006-09-20 08:38:30
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2006-09-20 08:38:31
Create service ports
PHASE 2006-09-20 08:38:31
Generate instance profiles
PHASE 2006-09-20 08:38:32
Versionize default profile, instance profile and start profile
INFO 2006-09-20 08:38:32
Processing of all file system node operations of table t_SAPComponent_Profiles_FORMS_SHARED succeeded.
INFO 2006-09-20 08:38:33
Processing of adapt operation t_SAPComponent_Profiles_SHARED succeeded.
WARNING 2006-09-20 08:38:34
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 08:38:34
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:20:32
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:20:32
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:20:43
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:20:43
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:22:06
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:22:06
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:22:09
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:22:09
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:22:11
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:22:11
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:22:14
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:22:14
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:47:12
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:47:12
FJS-00012 Error when executing script.
WARNING 2006-09-20 11:47:16
Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).
ERROR 2006-09-20 11:47:16
FJS-00012 Error when executing script.<b>Error 2 (The system cannot find the file specified.)
in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora81/bin/lsnrctl stop).</b>
-> which sap release do you want to install?
-> installing on oracle 8.x? it's no longer supported...
-> using the appropriate ORACLE home?
-> does the executable lsnrctl really exist under the given directory?
maybe you can stop the listener process yourself...either type in the command (see above as user <sid>adm) or stop the service..
GreetZ, AH
Message was edited by: Andreas Herzog -
How to install Flex Data Services 2 on Coldfusion MX 7?
hello,
How to install Flex Data Services 2 on Coldfusion MX 7?
was is tomcat..
I want to use RemoteObject(CFC) for oracle.
Thanks for your support.Hello -
To use mx:RemoteObject with CFC you don't even need FDS, you
can use FlexBuilder 2.0 and use it's internal FDS SDK to build,
compile and deploy full apps to be used in conjunction with CF 7.02
(Flex Connectivity)
Secondly, if you do want to install the full FDS 2.0
enterprise software you can find the instructions to do so for J2EE
apps servers here
http://www.adobe.com/support/documentation/en/flex/2/install.html#flexj2ee
HTH, Bill -
To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1
Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
ThanksHi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP -
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." ?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
How to install the SAPRouter service on a Windows 2003 Server?
Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
SharonI tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S -
Unable to install SQL 2005 Service Pack 3 (Unable to install Windows Installer MSI file)
I'm unable to install SQL 2005 Service Pack 3. This results in the following error message: Unable to install Windows Installer MSI file.
Could someone please help me. Thanks in advance!
=== Verbose logging started: 3-4-2009 9:33:00 Build type: SHIP UNICODE 4.05.6001.00 Calling process: d:\5ddfa356349ddf2e676c336d95c5\hotfix.exe ===
MSI (c) (E0:88) [09:33:00:404]: Resetting cached policy values
MSI (c) (E0:88) [09:33:00:404]: Machine policy value 'Debug' is 0
MSI (c) (E0:88) [09:33:00:404]: ******* RunEngine:
******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (c) (E0:88) [09:33:00:404]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:88) [09:33:00:404]: Grabbed execution mutex.
MSI (c) (E0:88) [09:33:00:419]: Cloaking enabled.
MSI (c) (E0:88) [09:33:00:419]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:88) [09:33:00:419]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:01:747]: Running installation inside multi-package transaction C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:01:747]: Grabbed execution mutex.
MSI (s) (28:CC) [09:33:02:029]: Resetting cached policy values
MSI (s) (28:CC) [09:33:02:029]: Machine policy value 'Debug' is 0
MSI (s) (28:CC) [09:33:02:029]: ******* RunEngine:
******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (s) (28:CC) [09:33:02:685]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (28:CC) [09:33:03:450]: File will have security applied from OpCode.
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi' against software restriction policy
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi has a digital signature
MSI (s) (28:CC) [09:33:04:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (28:CC) [09:33:04:888]: End dialog not enabled
MSI (s) (28:CC) [09:33:04:888]: Original package ==> C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:CC) [09:33:04:888]: Package we're running from ==> C:\WINDOWS\Installer\3d3a713.msi
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: looking for appcompat database entry with ProductCode '{53F5C3EE-05ED-4830-994B-50B2F0D50FCE}'.
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (28:CC) [09:33:05:685]: MSCOREE not loaded loading copy from system32
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\2f1994e.msi 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Opening existing patch 'C:\WINDOWS\Installer\e6ba0.msp'.
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\e6ba0.msp 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Couldn't find local patch 'C:\WINDOWS\Installer\e6ba0.msp'. Looking for it at its source.
MSI (s) (28:CC) [09:33:05:825]: Resolving Patch source.
MSI (s) (28:CC) [09:33:05:825]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (28:CC) [09:33:05:825]: User policy value 'DisableMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Looking for sourcelist for product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Adding {EE92F683-5F5C-4970-BB0B-9AC591B60268}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Now checking product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media is enabled for product.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Trying source \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 2203 2: \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\SqlSupport.msp 3: -2147287037
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing net source list.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing media source list.
MSI (s) (28:CC) [09:33:07:654]: SOURCEMGMT: Resolved source to: 'SqlSupport.msp'
MSI (s) (28:CC) [09:33:37:732]: Note: 1: 1314 2: SqlSupport.msp
MSI (s) (28:CC) [09:33:37:732]: Unable to create a temp copy of patch 'SqlSupport.msp'.
MSI (s) (28:CC) [09:33:37:732]: Searching provided command line patches for patch code {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:37:763]: Note: 1: 1708
MSI (s) (28:CC) [09:33:37:763]: Product: Microsoft SQL Server Setup Support Files (English) -- Installation failed.
MSI (s) (28:CC) [09:33:37:763]: Windows Installer installed the product. Product Name: Microsoft SQL Server Setup Support Files (English). Product Version: 9.00.4035.00. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (28:CC) [09:33:37:779]: MainEngineThread is returning 1635
MSI (s) (28:28) [09:33:37:888]: No System Restore sequence number for this installation.
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:37:888]: User policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Machine policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:37:904]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (28:28) [09:33:37:919]: Restoring environment variables
MSI (c) (E0:88) [09:33:37:935]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:88) [09:33:37:935]: MainEngineThread is returning 1635
=== Verbose logging stopped: 3-4-2009 9:33:37 ===This post should definitely help you
http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
Feroz
Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights. -
Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
ThanksI had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then. -
Hi Everyone,
I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
Server OS: 2008R2 SP1
SQL: 2008 R2 standard with SP3(tried SP2 before this)
Collation: SQL_Latin1_General_CP1_CI_AS
Reporting services installed: Yes(ticked do not configure during the installation)
Enabled reporting servics on port 80 with the default URL
DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
Basically, when Installing. I get this error(extract):
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[10/12/2014 2:35:25 p.m.] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
Any ideas?
I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).Can you try following steps:
If there are SSL certificates on your computer, by default SQL 2008
installation configures HTTPS for reporting websites. When DPM tries to
deploy reports on these websites it may fail if the reporting websites
are not accessible (might be due to invalid/expired certificates). To
workaround this, provided you do not require HTTPS for reporting websites do
the following:
1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
Services\ReportServer\rsreportserver.config
2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
2 means secure connection is required)
3. Connect to SQL reporting service configuration manager and connect to the
instance MSDPMV3BETA1EVAL
4. Click on Web Service URL, click advanced and remove SSL identities
5. Repeat the above for Report Manager URL
6. Make sure report manager URL and web service URL are accessible with out
any errors.
6. Restart report server
If that doesn't solve the problem, please try following steps:
1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
Server Configuration Manager
2. Connect to the instance which the DPM is using to install.
3. Browse Report Manager URL and web service url
4. If report manager URL or web service url throws any error say 500 or 404
fix the error. (Try also replacing machine name with localhost in url)
5. Otherwise delete DPMReports folder (if present) using below instructions
6. Restart reporting services
7. Try DPM setup again.
Deleting DPM reports:
1. Open report manager URL in IE
2. Click show details on right hand side
3. Put a tick against DPMReports folder
4. Click Delete button.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx -
Install of Data Services as active/passive behind F5 load balancers
I currently have two RedHat 5.5 x86_64 hosts, SAP_DS1 and SAP_DS2, and 1 database, Oracle RAC 11g and 1 F5 LTM load balancer sitting in front of the two hosts. The F5 load balancer VIP is set up as active/passive (fail-over) for the two hosts.
Will I need 2 local databases 1 central database or can I accomplish this with one local database?
Please advise on the recommended method for installing BOBJ DATA SERVICES XI 3.2 on two Linux hosts in an active/passive design.
ThanksYou might have better luck asking this question in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean
P.S. to moderators: can you create a sticky post to this effect?
Maybe you are looking for
-
Intel iMac OSX Snow Leopard 10.6.8 I logon to bank via its internet portal and next screen takes up all 27" display. Can this be controlled in any way or do I just put up with it, it is really annoying.
-
Report for goods intransit and good receipt
Is there any SAP standard report that can show goods intransit number and good receipt number at the same time?
-
View then modify content of xml file.
I am new in Java world and my background is database admin. What I am trying to achieve here is write a small java scripts code which would open connections.xml allow user to update connection definition. So here is what I do using java scripts, I lo
-
Scratches on iphone 5c back, can apple store replace it?
My new 5c has deep scratch on back of it, can this be replaced at all? thanks in advance
-
'SELECT_LIST_FROM_LOV' giving error if LOV fetches 47 rows
Hi All, We are using 'SELECT_LIST_FROM_LOV' function to create dynamic items in a tabular form. It works fine when LOV fetches < = 47 rows but is giving 'buffer overflow error' if it fetches more! Any help/suggestions would be appreciated. APEX Versi