J2EE Development Component - How to change vendor name

Hi,
While creating a  new J2EE Development Component, I didn't change vendor name and have created complete application,
Now I want to update vendor name, can you please help me out how vendor name can be changed in existing application.
Thanks

I have not tried it myself, however:
Try updating the references in your application-j2ee-engine.xml.
You may need to rename your project as well.
Good luck, Roelof

Similar Messages

  • How to change vendor name while payment

    we want to modify the vendor name while doing the payment, is it possible,
    regards,

    hi,
    You have have to create a new Vendor with the name you want to make the Payment. Then assign the vendor code in Vendor Master in payment Trasactions .
    When you process the payment then the cheque name will be picked-up from the alternate payee assigned. in the vendor master.
    Regards
    Harish

  • MSRV* Reports: How to add Vendor name?

    howdy gurus!
    Appreciate very much for any guidelines on how to add vendor name in MSRV* reports.
    Cheers,
    Ron

    Thanks for the inputs guys.
    So there's no technique yet to include it (similar to FBL*N and CJI3/KSB1).
    No available note also in SAPNotes.
    I already developed the Z*  report but the key user requests the possiblities in MSRV*.
    Cheers,
    Ron

  • How to change the "name of column" property of an text item in runtime?

    How to change the "name of column" property of an text item in runtime?
    I look the properties of items in help and found nothing about this!
    It's possible?

    Hi,
    an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
    First create block and add items
    The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
    Set into items the column name property to col1 , col2 ...
    At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
    in this way you can change the source of column value.
    Caution because if you change value type from varchar2 to date you must cast date into varchar2.
    May be that this way is valid only for view data not for insert-update, i don't remember.
    bye
    Message was edited by:
    Killernero

  • How to change host name for management agent.

    Hi,
    I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
    I know how to change port number, but I've no idea how to change host name.
    Have you got any idea?
    Thank you in advance.
    Matin

    Hi,
    you can change it in System Landscape directory.
    Go to the http:yourportal.com:50000/sld
    then click on the Landscape and update the new host name.
    Raghu

  • How to change the name of a BADI Implementation?

    Hello experts,
    Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
    Thanks in advance,
    AK

    Hi,
    Please go to transaction SE19, enter your implementation name.
    Then go to menu: Implementation -> Rename -> ...
    Regards,
    Ferry Lianto

  • How to change you name in iCloud

    My dad regestard my iPad onto his name then I had to change my name on iCloud because when I send email on my iCloud email address it says Philip on it. I don't want people to laugh at me so I changed it my name now my dad got me an iPhone and he regestered it on his name and in my iCloud email it says Philip instead of sofia I want my iCloud email address to have my name on it not my dad's I can't remember how to change the name. Please tell me or I will never use my iCloud email address ever again.

    I have the same problem, and I trued doing what you did and change my name but it still doesn't say my name(I'm a girl and the name is a guy's)

  • Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

    Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

    Go to the open dialog in Pages and select iCloud.
    Click on the folder that you created on iCloud to open the folder.
    On the lower half of the window (the open folder) click on the name of the folder.
    Once you click and select the folder's name it should be editable.

  • How to change datasource name based on the partition in configplan

    Hi
    Can any one please give me some solutions regarding how to change datasource name based on the partition in
    configplan.
    can't we do this in configuration plan?

    If you want to change template based on parameter. you have to use below syntax
    v_layout boolean
    V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
    ,template_code => 'HUBAPAPN' -- template name
    ,template_language => 'en'
    ,template_territory => '00'
    ,output_format => 'PDF');
    Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
    Thanks
    Kamalakar

  • How to change the name of column in ActionScript?

    I possibly know how to change the name of the column in DataGrid using mxml but dont know how  to change the name of column in  DataGrid using  ActionScript.
    var newDataGrid:DataGrid=new DataGrid();
         newDataGrid.dataProvider=arrayCollection():
    It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
    Please HELP!

    Give your datacolumn and id.  Then set the property for that column through the datacolumn id.
    DataGridColumn id="nameDC"
    Script:
    nameDC.headerText = "Name";

  • HT204053 Our Apple ID is ok and functioning.  However, I just came on as the IT for the group and cannot find how to change the name.

    Our Apple ID is ok and functioning.  However, I just came on as the IT for the group and cannot find how to change the name.

    Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

  • Can anyone tell me how to change the names of the networks I have set up on Airport Express

    Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

    Hi mkl1961,
    Happy Holidays!  The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.  
    Resetting an AirPort base station FAQ - Apple Support
    http://support.apple.com/en-us/HT3728
    What default settings will my AirPort base station have after a hard or factory default reset?
    AirPort base stations are set to request an IP address by DHCP.
    AirPort base station passwords are "public."
    AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    *A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port.  You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
    Airport Express Setup Guide
    manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
    I hope this information helps ....
    - Judy

  • How to Change Computer Name

    Two questions...the first is to find out how to change the name of a computer. When I pulled data of of my previous Mac, the name stuck onto the new one.
    Secondly...an old email address keeps popping up in my keychain. Anyway to get in and delete that?
    Thanks for any help.

    I recently added another iPhone to the Mac inventory and up initializing, it asked if I wanted to make a certain email address my default. I've not used that address for quite a while. I've seen this address pop up a couple other places too, so I'm wanting to retire it for good.
    Thanks for you help on the first question.

  • How to change of NAME and IP after RAC installation.

    Hi Friends,
    I have a challenge here...Would appreciate if anyone can help me..
    I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
    My issue is now the server names and ips are set and I am going to install the RAC.
    But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
    Because according to their server naming standards, current production servers are having the acceptable names and ips.
    The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
    After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
    Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
    Any metalink notes or commands as it is........
    Thank you,
    Mahesh.

    Hi,
    You can change the IP later but you can not change the hostname of the system.
    You have to install CRS freah if you want to change the hostname of the system.
    Please let us know which IP you want to change.
    You can see the metalink Note.276434.1 for VIP or VIP hostname change.
    Regards,
    KK

  • Where do I change Vendor Name of a DC?

    I have named the Vendor Name of my DC wrongly (I used the default "sap.com").
    How do I change the Vendor Name property after I reimport to my local DCs workplace in my NWDS?
    Thanks.
    Kent

    Hi, Gopi.
    I refer to DC Command Line Tool help menu (link you provided in the reply),
    I run the following command : RENAMEDC
    Here is the systax:
    renamedc -s <compartment> -n <DC name> -v <DC vendor>
    --targetname <new name of DC>]
    --targetvendor <new vendor of DC>]
    [--actname <name of activity that contains the changes>]
    [--actdesc <description of activity that contains the changes>]
    Info of my DC:
    Local Development dtc path: C:\Documents and Settings\j2eadm\.dtc
    Name of the DC = claim
    Name of the vendor = sap.com
    I want to change the name of the vendor to : xxx.com
    so here is the command:
    rename C:\Documents and Settings\j2eadm\.dtc -n claim -v sap.com --targetname claim --targetvendor xxx.com
    But I got the following error:
    No valid development configuration object available.
    Can anyone point to me what mistake I have made?
    Thanks.

Maybe you are looking for

  • ITunes library contents at several HDs, how to move location?

    I have a problem with having iTunes recognise that some of my iTunes library contents are being moved into another HD. I have only some most used music files at the internal HD of my PowerBook G4, and a huge video collection at an external HD, and no

  • Power failure corrupted my Mail program - H E L P !!!

    I just went through a power failure. The Mac OS has always survived nicely in the dozens of times I've experienced such things before. However, this time Mail got totally melted. When relaunching the other programs I was running ( Keynote, Pages, Saf

  • Changing Location for Assignment Files

    I create lots of InCopy assignments from InDesign. (Using CC for both) For each New Assignment I have to  change all the options: "Location for Assignment File", "All Spreads", "Link Image Files when Packaging". Is there a way to set the defaults for

  • Client Value to be Exchanged !!!!

    Hi all    I have modified the <b>Portal Logon Page</b> for accomdate a new <b>CLIENT field</b>(basically a Drop Down).    I have written a <b>System Resolving Service</b> that resolves the iView to a particular Back End System at <b>run time..</b>   

  • Variables with fixed value

    Is there in Java an operator that allow to a variable only a fixed set of values. For example the variable char color have only these value: "red","yellow",.. "etc".