J2EE host or port not specified; define them under "System Settings"
HI
Iu2019m facing the issue with SOAMANAGER
In transaction SOAMANAGER we configure the endpoints(service and binding) for the provider
and try test with Open Web Service navigator for selected binding under overview tab
Its Showing the Error:
J2EE host or port not specified; define them under "System Settings"
please help me to resolve this issue.
Thanks
Vadde
Issue resolve
trtransaction SOAMANAGER --> System Global settings -->Access J2EE server --> here we need to specify the Java host name and Port number
Thanks
Vadde
Similar Messages
-
My iPad does not show "Software Update" under General settings. How do I update to the latest IOS 6.1.3 without this prompt?
JudithKimball2013 wrote:
My iPad does not show "Software Update" under General settings...
That is only a feature of iOS 5 or later...
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
HT5457 I have a 2nd generation Ipad and do not have the option under general setting to update IOS
I have a 2nd generaton Ipad and do not have the option under general settings to update to the lates IOS
You do not have iOS 5 or later installed. You need to connect to your computer and update using iTunes.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When will come this error Could not connect to SMTP host: son1175, port: 25
Hi all
we configure SMTP server on Linux ES,my java application run on same server
from my application trying to send a mail i got this error
[0] EmailConnection.getConnection: Attempting connection...
DEBUG: setDebug: JavaMail version 1.3.1
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "son1175", port 25
[0] EmailConnection.getConnection: Cannot connect to server with configuration
smtp://padmanab:*@son1175/. Port = 25. Security: none.
Properties: {mail.port=25, mail.smtp.timeout=30000, mail.smtp.connectiontimeout=30000}
Could not connect to SMTP host: son1175, port: 25;
nested exception is:
java.net.ConnectException: Connection refused
2005-03-30 10:03:03,751 INFO [plt.userManagement] [PoolThread-9] "Password Reset" email could not be sent to vallish at the email address, "[email protected]".
but mail server is configured currectly
please tell cause of this error out java application or my SMTP server
regards
satyaCould not connect to SMTP host: son1175, port: 25;
nested exception is:
java.net.ConnectException: Connection refusedYou didn't notice that this question is asked every day here?
Your computer can't connect to a computer named "son1175", or if it can then that computer isn't running a server listening at port 25. Talk to your network people if your computer name is the right one and ask them why not. It is nothing to do with programming. -
No Hosts Found - Technical system not well defined
We are performing Diagnostic configuration for managed system.We are trying to configure solution manager has managed system with ABAP and Java stack.
Though we have defined the Java instances in the following format,system is throwing an error saying No hosts found,Technical system is not well defined - for solution managed Java.
Instance server role server
J2EESERVER_KRESSAPCRM_00 DISPATCHER Dispatcher kressapcrm
J2EESERVER_KRESSAPCRM_01 SERVER J2EE-Server kressapcrm
What might me the issue?
Regards
ShailajaHi,
All these details are entered in SMSY
Abap stack header data:
Message server : KRESSAPCRM
System Number : 00
Database : SOL
Abap stack Instances data:
Instance : KRESSAPCRM_SOL_00
Server : KRESSAPCRM
Java stack header data:
Message server : KRESSAPCRM
Installation Number : 0020190937
Dispatcher : 2062900
Database : SOL
Java stack Instances data:
Instance : J2EESERVER_KRESSAPCRM_00
Server Role : J2EE server
Server : KRESSAPCRM
Regards
Shailaja -
Specified Host Directory does not map to your Site Address
I have defined my site using ftp in the Dreamweaver site definitions and I can connect to it and upload changes with no problem. I am now trying to setup InContext editing capability to the site. When I go thru the steps to add a site in the InContext Admin section, the first steps in the process work fine. I am able to fill out the ftp settings with my username and password and when I test the settings it comes back that it is able to connect to the site. The next step is where I run into problems. When I try to add the assets I get an error that says "The Specified Host Directory does not map to your Site Address". I can use the same username and password with an ftp Client program and I have complete access to the root folder and all the files in it. I have used exactly the same Host DIrectory in both my Dreamweaver Remote Setup and in InContext Admin. Why does it work with Dreamweaver uploads and it can not be used to register in InContext?
My site is www.sonautosales.com and my root folder is defined as /www.sonautosales.com/
I have included a screenshot of the error message.Hi Corey:
I just went thru the entire thread trying all the suggestions but
still no luck. The closest I come to getting this registered is using
the following settings.
ftp host: ftp.prioritysalesandservice.com
Passive ftp: unchecked
Username: prioritysales
Password: **** (I do not mind sending you the password if it will
help you solve my problem)
This tests good all the time.
Host Directory: /www.prioritysalesandservice.com/ (This is the folder
name that contains my website and in it is the index.html page)
Image Directory: Images/ (the folder name inside the host
directory that contains my images)
Default Page: Default.htm Default.asp index.html index.htm index.php
index.cfm
I think the host directory I am using because when I put that in and
then use the browse button to find the Image directory it shows all
the files and folders in my Host directory
The website address is: www.prioritysalesandservice.com
Please let me know anything else you need, again I have tried all the
things mentioned in the thread and by using these settings I get the
following error when I save:
The specified Host Directory does not map to your Site Address (URL)
THe "/www.prioritysalesandservice.com/" host directory could not be
accessed through this Site Address (URL):
"http://www.prioritysalesandservice.com/"
Thanks for you help, hope you can figure it out.
Steve -
Could not open connection to the host, on port 23: Connect failed
Can anyone please help with this telnet problem on CISCO 877 ADSL Router
I am trying to telnet into my ISP Router remotely using public IP which has been dynamically assigned to the router by the ISP.
I can Ping the Router and I can also go out to the internet on that router but, I can not telnet into that router from Inside the Network nor Outside the Network. There are no Firewalls involved.
I have tried to clear the config and reconfigure it again, it does not help, I have also applied same config on another CISCO 877 ADSL Router it still does not work.
ERROR i get on the Command Prompt: Could not open connection to the host, on port 23: Connect failed
I have shown some of the Show Run out put below if that helps,
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit x.x.x.x 0.0.0.7
dialer-list 1 protocol ip permit
line vty 0 4
password 7 ***********
login
Manny Thanks
PunitFind Below the Requested Sh run outputs
ADSL-ROUTER1#sh run | beg line vty
line vty 0 4
password 7 ***********
login
scheduler max-task-time 5000
end
I have removed the IP for security reasons
ADSL-ROUTER1#sh ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
S x.x.x.x/29 is directly connected, Vlan1
C x.x.x.x/32 is directly connected, Dialer0
x.0.0.0/32 is subnetted, 1 subnets
C x.x.x.x is directly connected, Dialer0
S* 0.0.0.0/0 is directly connected, Dialer0
I also keep getting the message below on the console done know if this is part of the problem
Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
as reached its maximum threshold 16
Hope this output helps
Thanks -
Could not open a connection to host on port 23 : Connect failed
Hi,
I am using Oracle Unbrakeable Linux 5, when i try to connect to the server from the client machine using TELNET, i get the following error
c:/> telnet 192.168.6.184
Connecting to 192.168.6.184...Could not open a connection to host on port 23 : Connect failed.
regards,
CharanHi,
i did the following but still doesn't work
# mv /etc/securetty /etc/securetty.bak
The following is the Hosts file
=====================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.6.184 vision12.dsrc2.com vision12
#::1 localhost6.localdomain6 localhost6
192.168.6.181 prod20.dsrc2.com prod20
============================================================
When i try to connect to other server using TELNET from this server, i am able to connect. and when i try to connect to this server from other server using TELNET i am able to connect. But, when i try to connect from the CLIENT Machine, i am not able to connect, the client machine is Windows 2000 Professional.
SERVER to SERVER communication using TELNET is working.
CLIENT to SERVER communication using TELNET is not working.
regards,
Charan -
I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.
-
Hi,
We have an inbound IDOC coming from an XI system to a R/3 system.
I am not able to simulte this in R/3. It is giving me the error "Recipient port invalid".
The port is already defined. I have tested the connection. Unfortunately I am not able to get through this error for simualting this in R/3.
Thanks and regards.
ArnabHi,
Check this link..
Re: custom idoc............
Check these links... looks like similar to your issues which are replied..
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/error-in-sending-idoc-sender-port-in-control-record-is-invalid-1043627
http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/we19-recipient-port-invalid-564781
Hope this would help you.
Regards
Narin Nandivada -
OAS: The request did not specify a valid virtual host.
Hi,
we install the OAS 3.01 on our system (NT 4.0 sr 4 Worstation).
we start the AdminListener with:
oswctl start ADMIN
the listener starts sucessfully.
trying accessing on the ADMIN-Page with the IE 4.0
(http://[IP-adress]:8888)
the following message occured:
The request did not specify a valid virtual host.
any idea ???
Thank
Martin
nullDennis Bourgeois (guest) wrote:
: Peter Siket (guest) wrote:
: : Martin Behrmann (guest) wrote:
: : : Hi,
: : : we install the OAS 3.01 on our system (NT 4.0 sr 4
: Worstation).
: : : we start the AdminListener with:
: : : oswctl start ADMIN
: : : the listener starts sucessfully.
: : : trying accessing on the ADMIN-Page with the IE 4.0
: : : (http://[IP-adress]:8888)
: : : the following message occured:
: : : The request did not specify a valid virtual host.
: : : any idea ???
: : : Thank
: : : Martin
: : Hi Martin,
: : we learned that OAS 3.01 only accepts hostnames. The only
way
: to
: : enable communication is to supply a hosts-file with the
: : appropriate entry. I don't know why but so it works.
: : Peter
: Martin,
: I'm running OAS 4.0.8 but here is a thought... In 4.0.8 if you
go
: to the network properties for your listner and add the IP
address
: there then it works. I also found that if you are using
: something like a Cisco domain controller to do load balancing
: you
: will want to list the IP address of the Domain Controler in
there
: as well.
: Dennis
If you access using the hostname, this will be passed onto the
Application Server in addition to the IP address. The
Application Server will use the hostname details to determine
the listener files to use under the $ORACLE_HOME/ows path. This
means you can more than one set of OAS files and therefore in
theory service two different hostname addresses mapped to the
same IP address.
Nigel.
null -
Filters not defined? Yes they are, I just defined them!
In my CL_SALV_TABLE application, I set a filter in the screen. I then run this code:
lr_filters = ir_salv_table->get_filters( ).
IF lr_filters->is_filter_defined( ) = abap_false.
EXIT.
ENDIF.
It always tells me there are no filters defined. But there are. I just defined them and can see them on the screen!
I've used cl_gui_cfw=>flush( ). I'm currently on 7.01 SP 7, and can't find a note for this. Any ideas?I wish I hadn't used it! But I can't change it until next release of the software.
The CL_SALV_TABLE object is an instance in the same class as the method in which I'm getting the filters. Hmm. Interesting. When I debug an event triggered on the ALV - I can see the filter. The lack of filter is when I'm processing the PAI... Maybe there's more than one instance hanging around...
Edited by: Matt on Aug 27, 2011 11:19 AM -
Telent:could not open connection to the host on port 23 connect failed
Hi,
How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
While runing the telnet command on windows XPP virtual machine it's gives error
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd\
C:\>telnet 192.168.1.2
Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
C:\>
Thanks
Regard
GSMuser9230833 wrote:
Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
Your command file in Window will look something as follows:
@echo off
"c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access). -
A WebGroup/Virtual Host to handle /CourseLaunch.aspx has not been defined
Hi Team,
I am facing a strange issue. Through my java application I am trying to invoke a webservices of another third party application, which basically launches a course from there.
I have integrated the webservices code (WSDL, proxy classes & servlet) in my EAR file.
Whenever I try to launch a course from my application for the first time, A new window opens with a HTTP 404 error. In the log file it says:
A WebGroup/Virtual Host to handle /elex/planner/CourseLaunch.aspx has not been defined.
But if I close this error page & try to relaunch the same course from my application, the course loads perfectly. Do you know what might be causing this issue.
I am invoking a 3rd party URL from my servlet as shown below:
String launchURL = launchBaseURL + packid + "&elexssotoken=" + userkey;
System.out.println("launchURL:" + launchURL);
httpresponse.sendRedirect(launchURL);
here the launch launchBaseURL=http://abc.com/elex/planner/CourseLaunch.aspx?_courseCode=
In my Sysout the URL is generated correctly i.e
http://abc.com/elex/planner/CourseLaunch.aspx?_courseCode=M-PTOS&elexssotoken=89bce4e0-c36d-4dc0-a9a2-0450c709cf64
but on checking the HTTP traffic, I see the following flow
# Result Protocol Host URL Body Caching Content-Type Process Comments Custom
9243 302 HTTP abc.com /elex/planner/CourseLaunch.aspx?_courseCode=M-PTOS&elexssotoken=89bce4e0-c36d-4dc0-a9a2-0450c709cf64 221 private text/html; charset=utf-8 iexplore:1440
followed by:
# Result Protocol Host URL Body Caching Content-Type Process Comments Custom
9248 404 HTTP mywebapp.com:9085 /elex/planner/CourseLaunch.aspx?_courseCode=M-PTOS&elexssotoken=89bce4e0-c36d-4dc0-a9a2-0450c709cf64 273 text/html iexplore:1440
Here I see that host abc.com is followed by mywebapp.com which I think is causing this issue. But I am not sure why it gets redirected to mywebapp.com when I launch the course for the 1st time, but works fine when I relaunch the same course again.I'm not getting what the hard part is: you're requesting a resource that doesn't exist. You're requesting something under 'helpSet0' and no such thing exists on your server. What do you exactly mean by I've tried all sorts of things that "should" work ?
Maybe you are looking for
-
Using BAPI_SALESORDER_CREATEFROMDAT2
Hi! I would like to ask if anyone has sample code of a working call to the bapi BAPI_SALESORDER_CREATEFROMDAT2? I've tried it and I've been able to create a sales order, however I have troubles with repeating items in Conditions. Tried changing LOGIC
-
I want to use my 5 GB of storage in iCloud to back up the documents on my MacBook Pro. Is this possible? If so, how is it done from my MacBook Pro? I can't find an upload method.
-
Due to a problem with my older MacBook Pro I had to wipe it clean. Now I no longer have iPhoto or iMovie , will I have to pay for those programs ? If so, are there any older versions available I can download for free.
-
Vendor blocking for specfic materilas
Hi, Can someone explain me how to block a vendor from purchasing certain materials. MRP should also take this into account.
-
T-code for creating new payment term
Dear All, What is the T-code for creating new payment term in PO. Pleaze reply it soon. Thanks Prasant Sekhar