J2EE is hanging at the startup

Hi
I have a JAVA instance, at the startup, the system is hanging after he start the locking manager services. In the default.log file, I got the following error.
#1.5^H#00306E2BBC8500010000024900003DFF000442D2D458E07F#1199373179994#com.sap.en
gine.core.locking.impl3.LockingManagerImpl##com.sap.engine.core.locking.impl3.Lo
ckingManagerImpl.jenqulib#######Thread[SAPEngine_EnquReader,5,main]##0#0#Error#1
#/System/Server#Plain###Encomi: failed to connect to ciad1/3223/Connection refus
ed (errno:239))#
The database is up and running. Did anyone have an idea of how to resolved this issue ??
Thank you

Hi Luc,
please check the log files of the SCS instance and check if the port is available and running. Maybe the port is already in use before, but this information should be given in the log file.
Best regards,
Silvia

Similar Messages

What to do when my Macbook air won't load from startup. It hangs in the middle during the black apple screen at the beginning

my Mac book air will not start up it hangs in the middle of the status bar when I turn it on and will not move.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Why does my Mac hang at some point? The startup is slower than usual and sometime's the graphic glitches occur. please help!

My mountain lion OS hangs like windows does and sumtimes have visual glitches like the drop down menu's are half visible. Sometimes it slows down at every point. And its just 2 months old. Please help.

Isolating Issues
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try a restart.
Run Disk Utility/Repair Permissions. Run until it reports no errors. If there is a recurring error, see the article on what permission errors can be ignored.
Disk Utility
Disk Utility Repair Permissions You Can Safely Ignore
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac
Upgrade Nightmares

ATS files in cache hang system at startup

We have this inconsistent problem happening on all our Mac's (10.4.10). The problem does not happen each day or consecutive days. Here is what happens. Start the Mac in the morning. When it get's past the startup screen and then starts the load the desktop and finder etc. It just hangs. What you see is the spotlight icon in top right but the rest of the menu bar does not show up. None of the desktop icons appear either. If you move the mouse towards spotlight you see it is the spinning ball. What we do then is hard shutdown the Mac then restart in safe boot mode. Once the Mac is running clean out the files in caches for ATS in library, then ATS caches in system/library. Restart the Mac and everything is normal.
Some how this hang up is related to the ATS cache files but not sure how it hangs the system?
Anyone else have this problem? It is causing us a growing frustration some of our operators are leaving the computer running overnight as to not have to deal with the issue when they turn on the Mac.
Thanks
Steve

Well, if it is working now...
You could check to see what the version of the Finder is as it is not reported in the crash log. The application is here:
/System/Library/CoreServices/Finder; the version should be 10.6.7. If you suspect a problem caused by updating to 10.6.6, then I suggest downloading and installing the Combo update.
bd

Tecra M4 Hangs at POST (startup) screen, no beeps...Help!

Hello everyone,
Currently my Tecra M4 shows the initial startup Power On Self Test (POST) screen with the Toshiba logo and various icons under it signifying what I think is the boost sequence. It then freezes. There is no beeping, and I cannot enter the BIOS (nothing happens when I press Esc or F1).
The laptop did not have any physical trauma before this freeze-up started (literally sat on a desk between working and non-working). I hope it's not a hardware problem, but since I can't even get into the BIOS, I don't have my hopes up.
Here is what happened immediately before this symptom began happening: I had the computer on (and it was working perfectly) and it went into stand-by mode on its own. When I tried to revive it, the screen stayed blank. After waiting around for a few minutes, I held down the power switch to force it to shut off. I then turned it on and there was a message saying "Resume failure" and it froze. After waiting for a few minutes (the Toshiba POST screen never shows up) I turned it off again.
After that, every time I turn it on now, the system hangs at the initial Toshiba screen and does not respond to any keyboard commands. After I press Esc or any other key 15 times (in an effort to get to the BIOS) the computer starts beeping anytime I press a key. Otherwise, there is no beeping that occurs before that.
The system was fairly fresh off of a factory reset of the hard disk and the BIOS was last in its default settings. I have disconnected all power (the battery, power cord, and the little NiMH battery connected to the motherboard) for an hour, but that did not help.
Do any of you have any suggestions? How can I further troubleshoot this?
Thanks in advance for any suggestions you might have!

I wouldn't reconnect the hard drive with the machine running. Best to shut down before doing that.
It's possible the cables were coming loose on the drive, but not likely.
Perhaps try reconnecting the drive and putting her G5 into Target Disk Mode. If it'll do this, you might be able to see if the drive has issues by running something like Disk Utility or DiskWarrior on it from the computer it's plugged into.

My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1). I was able to restart ok after installation; I even moved some files from my Galaxy 3 to the imac. But on the next (and all subsequent) restart attempts,

My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
I was able to restart ok after installation; I even moved some files from my
Galaxy 3 to the imac.
But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
How to fix? Thanx in advance.

Mac OS X: Gray screen appears during startup

Class not found exception for the startup class defined.

iam using weblogic server 10 and bea jrockit 1.5.0.12.
i have created a startup class in the admin console for a web project and i have deployed the war file using the console in a user defined domains, user project directory.
when i start the server, iam getting class not found exception for the startup class.
But, the startup class is available in the web archive (war). how should we add the classes and jars in the war to the classpath in setDomainEnv.sh or is there any other setting available in the console to enable this.

Hello Julius,
yes sure, we can move this post to the NW admin forum. I have already posted similar thread on sun forums. I was hoping that someone from SAP SDN already tackled this problem and if not someone specialized in J2EE Engine could troubleshoot me from the class problem I'm getting. I don't know if it's specific from the agent or if this ClassNotFound is a general SAP J2EE Engine error relating to a library not correclty defined.
Kind regards,
Tanguy Mezzano

Services has timed out at the startup

Hi,
We are running on SAP XI 3.0 SP 21 Windows 2003 with Oracle 10.2.0.2. The problem is that some of the J2EE services cannot be started, at the startup phase, after respecful offline backup. Please find the error, below;
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.xi.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.file.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.mail.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.cpa.svc has timed out > service com.sap.aii.af.cpa.svc start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.ms.svc has timed out > hard reference to service com.sap.aii.af.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.rfc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.bc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service tc~lm~ctc~cul~service_sda has timed out > service tc~lm~ctc~cul~service_sda start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.ispeak.svc has timed out > hard reference to service com.sap.aii.af.ms.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.jdbc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service rfcengine has timed out > hard reference to service ejb. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.jms.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.security.service has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service ejb has timed out > service ejb start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.marketplace.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:062 , 16 services have timed out. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer , ,
06/13/2010 , 22:09:22:015 , Sun Jun 13 22:09:22 EEST 2010 Thread[Thread-1] initiated a full thread dump due to: Timed out services:
Service com.sap.aii.af.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.marketplace.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service ejb > service ejb start method invoked.
Service com.sap.aii.af.security.service > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.jms.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service rfcengine > hard reference to service ejb.
Service com.sap.aii.adapter.jdbc.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.af.ispeak.svc > hard reference to service com.sap.aii.af.ms.svc.
Service tc~lm~ctc~cul~service_sda > service tc~lm~ctc~cul~service_sda start method invoked.
Service com.sap.aii.adapter.bc.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.rfc.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.af.ms.svc > hard reference to service com.sap.aii.af.svc.
Service com.sap.aii.af.cpa.svc > service com.sap.aii.af.cpa.svc start method invoked.
Service com.sap.aii.adapter.mail.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.file.svc > hard reference to service com.sap.aii.af.cpa.svc.
Service com.sap.aii.adapter.xi.svc > hard reference to service com.sap.aii.af.cpa.svc.
, Error , /System , com.sap.engine.frame.Environment , ,
06/13/2010 , 22:06:16:453 , deploymentListener registered , Info , , com.sap.tc.lm.ctc.cul.j2eeengine.CULServiceFrame , ,
06/13/2010 , 22:06:16:437 , entering CulServiceFrame.start , Info , , com.sap.tc.lm.ctc.cul.j2eeengine.CULServiceFrame , ,
06/13/2010 , 22:06:15:890 , Configuration util service started successfully. , Info , /System/Server/CTC , com.sap.tc.lm.ctc.confs.service.ServiceFrame , ,
06/13/2010 , 22:06:14:656 , Starting Configuration util service... , Info , /System/Server/CTC , com.sap.tc.lm.ctc.confs.service.ServiceFrame , ,
Consequently, because of those processes were timed out, XI cannot be started, successfully. As a workaround, I am restarting java servers, manually. So, anyone has a suggestion about this problem?
Thank you

Hello Orkun
Ensure that the MaxThreadCount parameter is set to 350 as per note #937159 XI Adapter Engine is stuck. This will help the overall system performance.
Regards
Mark

Flash Builder 4.5.1 for Mac hanging/crashing during startup "Loading Workbench"

Hello,
I'm having ongoing trouble with Flash Builder 4.5.1 hanging/crashing during startup.
Sometimes the following Terminal command fixes the issue:
cd ~/Documents/Adobe\ Flash\ Builder\ 4.5/cascaded/308971/configuration/.settings
rm org.eclipse.ui.ide.prefs
However this isn't a silver bullet solution, and sometimes the only way is to uninstall and reinstall FB4.5.
But this is a major hassle, especially after 3 or 4 times!
I am running Mac OS X 10.7 and have updated to FB 4.5.1 Premium and also installed Subversion/Subclipse as well as the BlackBerry PlayBook SDK.
Problems seem to occur when working in SVN projects.
I have also noticed that the Delete and Arrow keys and Right Click fails to work sometimes also.
Is there a way to reset / clear FB 4.5 Prefs / Workbench?
Thanks,
David Douglas
Here is the console report below:
/Applications/Adobe/Adobe\ Flash\ Builder\ 4.5/Adobe\ Flash\ Builder\ 4.5.app/Contents/MacOS/Adobe\ Flash\ Builder\ 4.5 ; exit;
!SESSION 2011-09-13 15:07:58.914 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_26
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US
Framework arguments: -keyring /Users/david/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86 -keyring /Users/david/.eclipse_keyring -consoleLog -showlocation
!ENTRY org.eclipse.core.resources 2 10035 2011-09-13 15:08:02.101
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.ui 2 0 2011-09-13 15:08:02.905
!MESSAGE Warnings while parsing the commands from the 'org.eclipse.ui.commands' and 'org.eclipse.ui.actionDefinitions' extension points.
!SUBENTRY 1 org.eclipse.ui 2 0 2011-09-13 15:08:02.906
!MESSAGE Commands should really have a category: plug-in='com.qnx.flashbuilder.multiplatform.qnx.ui', id='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.OpenInfoCenter', categoryId='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.category.help'

Delete the Adobe Flash Builder 4.5 folder from your Documents (assuming you don't have anything valuable in there). That seemed to work for me, as I don't keep my projects in there but there were some temp files that were breaking it. You'll probably have to re-inport your projects.
Adobe, I'm getting very sick of your (expensive) products wasting my time.

When I pressed the power button it hangs on the welcome screen and what wrong with the system

When power on the MacPro it hangs on the welcome screen. What should I do to overcome this issue

I would recomend reseting the PRAM. A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings. Hope this helps!

Switched computer cases and now I hang at the MSI splash screen.

Hey guys. I've never had any problems with building my PC until yesterday on the simplest of tasks.
I decided to buy a new case and switch everything over but when I did it decided to hang on the MSI motherboard splash screen.
Specs:
* MEM 4Gx2|G.SKILL F3-12800CL9D-8GBXL + one more stick.
* Processor = AMD Phenom II X6 1055T Thuban 2.8GHz Socket AM3 125W Six-Core Desktop Processor HDT55TFBGRBOX
* Graphics Card = HD 7950
* Motherboard = MB MSI| 880GM-E41 880G R
* PSU = CORSAIR CX series CX500 500W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
* OS = Windows 7 64Bit
* No overclocking.
So far I've done the following.
* Removed battery/Jumped the bios.
* Checked and rechecked each RAM stick.
* Removed all connections.
* Removed graphics card etc.
Any help would be greatly appreciated, Christmas has kind of killed my budget for a new build.
Thanks!
These are as far as I can get before everything stops working.

Really strange.
Have you made sure that there was will be/was no contact between mobo and case (apart from spots where the contact should be made) ? This could've break the motherboard.
Check ALL of the power supply cable connections between it and mobo.
Now something weird which doesn't seen to make any sense... Try to put your motherboard back to the old case.
That's all my suggestions, apart from that, if you're still able, then get it on a warranty and RMA it.
Good luck.

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

How do I disable the startup sound on macbook pro 7,1?

I need to disable the startup sound on the macbook pro 7,1 running 10.6.8. If anyone can give me info I would appreciate it.

Look for Startup Sound on Macupdate.com
You really shouldn't turn it off, as if there is a error you won't be able to hear the beep codes.
However you can lower the volume.

How do I use the J2EE EJB container with the FULL version of Tomcat

The version of Tomcat integrated in J2EE is really cut-down. I want to be able to run the standard Tomcat 4.0.1 to give the full JSP facilities, but I also want to be able to use EJBs from the J2EE.
If I copy the j2ee.jar, j2ee-ri-svc.jar and home interface to the "lib" directory they do not appear to be loaded, as I cannot resolve the javax.ejb.EJBHome.class.
If I copy the same library into the application's WEB-INF/lib directory then the naming jaxax.naming.InitialContext gives a context without the java:/comp/env entries.
I do not want to use another EJB contrainer after having got used to deploying apps with J2EE.
If anyone can help I would be greatful, and post a thanks message with duke dollars!
Chris
10 Duke Dollars available

I have done it before and basically it is not that difficult, but in practice not that easy ;-)
All you need to do is see Tomcat as a client to the EJBs. This means deploying the application in two parts: the webapp as a WAR to Tomcat 4.0.1, and the EJBs to J2EE. Both running and started independantly.
This ofcourse means that the WAR file must have the stubs of the EJBs to be able to communicate and access to j2ee.jar to get the InitialContext.
So:
- compile the EJBs
- create the EAR (containing only EJBs)
- deploy the EAR
- copy the stubs to the libs directory of the webapp
- compile the webapp
- create the WAR
- deploy the WAR
Off you go.
Tom

My P62290ea will usually start OK in the morning, but sometimes it hangs on the Windows screen.

I am running Win7 home Premium 64bit SP1. When I start up in the morning usually the PC loads OK. However, often it hangs on the Windows screen and I have to reboot and sometimes it is OK and other times I have to go via the HP srart-up screen. This inconsistency is very confusing and frustrating. Can anyone help?

Hello amorriss,
You have a frustrating issue to troubleshoot because of the randomness. We can try troubleshooting, but hard to say if it fixes it or not for a while.
Try putting the computer into a clean boot state, you can find instructions on this forum thread, http://goo.gl/w3KQH.
Once in a clean boot state see if you can get the problem to happen
If it does then we know it's not a program that is starting up causing the issue instead it is likely a driver.
If it doesn't then one of the programs that was booting when Windows boots was causing a conflict, the trick is figuring out which one.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

J2EE is hanging at the startup

Similar Messages

Maybe you are looking for