J2EE Node Down
Dear Friend,
In our ECC 6.0 system J2EE instance is down.Its saying J2EE information unavailable & Dispatcher is yellow in MMC.
We are getting this problem quite frequently.In SMICM it shows J2EE is running.
Please have a llok on dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid GP1
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 161
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 11328
Wed Aug 27 06:54:21 2008
kernel runs with dp version 239000(ext=110000) (@(#) DPLIB-INT-VERSION-239000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 11328) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 161 successfully loaded
shared lib "dw_xtc.dll" version 161 successfully loaded
shared lib "dw_stl.dll" version 161 successfully loaded
shared lib "dw_gui.dll" version 161 successfully loaded
shared lib "dw_mdm.dll" version 161 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Wed Aug 27 06:54:26 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >svrshir144_GP1_01 <
DpShMCreate: sizeof(wp_adm) 162944 (1752)
DpShMCreate: sizeof(tm_adm) 58861440 (29416)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
DpShMCreate: sizeof(comm_adm) 2208080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D600050, size: 62243680)
DpShMCreate: allocated sys_adm at 000000000D600050
DpShMCreate: allocated wp_adm at 000000000D602150
DpShMCreate: allocated tm_adm_list at 000000000D629DD0
DpShMCreate: allocated tm_adm at 000000000D629E30
DpShMCreate: allocated wp_ca_adm at 0000000010E4C5B0
DpShMCreate: allocated appc_ca_adm at 0000000010E5FE30
DpShMCreate: allocated comm_adm at 0000000010E86F30
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000110A2080
DpShMCreate: allocated gw_adm at 00000000110A2100
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000110A2130
DpShMCreate: allocated wall_adm at 00000000110A2140
MBUF state OFF
DpCommInitTable: init table for 2000 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
Wed Aug 27 06:54:27 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 5119 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5776
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 06:54:49 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1659]
***LOG Q0K=> DpMsAttach, mscon ( svrshir144) [dpxxdisp.c 12153]
DpStartStopMsg: send start message (myname is >svrshir144_GP1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 161
Release check o.K.
Wed Aug 27 06:55:04 2008
MBUF state ACTIVE
Wed Aug 27 06:55:05 2008
DpModState: change server state from STARTING to ACTIVE
Wed Aug 27 06:55:43 2008
change reqtype of W4 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 4DIABTC) [dpxxdisp.c 14194]
change reqtype of W5 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 5DIABTC) [dpxxdisp.c 14194]
change reqtype of W6 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 6DIABTC) [dpxxdisp.c 14194]
change reqtype of W7 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 7DIABTC) [dpxxdisp.c 14194]
change reqtype of W8 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 8DIABTC) [dpxxdisp.c 14194]
Wed Aug 27 06:57:04 2008
J2EE server info
start = TRUE
state = ACTIVE
pid = 5776
http = 50100
https = 50101
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework
Wed Aug 27 07:00:09 2008
change reqtype of W4 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 4BTCDIA) [dpxxdisp.c 14194]
change reqtype of W5 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 5BTCDIA) [dpxxdisp.c 14194]
change reqtype of W6 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 6BTCDIA) [dpxxdisp.c 14194]
change reqtype of W7 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 7BTCDIA) [dpxxdisp.c 14194]
change reqtype of W8 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 8BTCDIA) [dpxxdisp.c 14194]
Wed Aug 27 09:14:24 2008
ERROR => DpRqCheck: T150 in state TM_SLOT_FREE [dpxxdisp.c 7102]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 6207): [dpxxdisp.c 5401]
-IN-- sender_id REMOTE_TERMINAL tid 150 wp_ca_blk 2 wp_id -1
-IN-- action SEND_TO_WP uid 1956 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 548 rq_id 64261
Wed Aug 27 09:16:47 2008
SoftCancel request for T292 U1458 M0 received from REMOTE_TERMINAL
Wed Aug 27 09:25:09 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 1 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 15590
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000000010000010A
Wed Aug 27 09:40:09 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 1 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 43072
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000000010000012D
Wed Aug 27 09:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 1 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 1736
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000145
Wed Aug 27 10:10:09 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 25993
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000000010000016A
Wed Aug 27 10:24:42 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 138 / sock 3156
(SI_ECONN_BROKEN/10054; I4; ST; 142.42.36.186:1402) [nixxi.cpp 4424]
Network error of client T319, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T319 is 142.42.36.186(39438p.gloscc.gov.uk)
***LOG Q04=> DpRTmPrep, NiBufReceive (3402 DRODWAY 319 39438P ) [dpxxdisp.c 11831]
RM-T319, U3402, 300 DRODWAY, 39438P, 10:05:42, M0, W2, , 2/0
Wed Aug 27 10:25:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 1 wp_id 1
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 50432
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00010002000000AD
Wed Aug 27 10:40:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 10400
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000001A4
Wed Aug 27 10:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 33197
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000001C0
Wed Aug 27 11:03:26 2008
ERROR => multiple send of tid 461 (JHILL02 , M0) [dpxxdisp.c 11976]
Wed Aug 27 11:03:42 2008
Network error of client T461, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T461 is 142.42.36.35(37031p.gloscc.gov.uk)
***LOG Q04=> DpRTmPrep, NiBufReceive (4862 JHILL02 461 37031p ) [dpxxdisp.c 11831]
RM-T461, U4862, 300 JHILL02, 37031p, 11:03:07, M0, W0, STAR, 2/1
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 7164]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3796): [dpxxdisp.c 5401]
-IN-- sender_id REMOTE_TERMINAL tid 461 wp_ca_blk 0 wp_id -1
-IN-- action SEND_TO_WP uid 4862 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 33 rq_id 47474
Wed Aug 27 11:03:43 2008
ERROR => DpRqCheck: T461 in state TM_SLOT_FREE [dpxxdisp.c 7102]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 6207): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid 461 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 4862 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 47672
-IN-- req_info LOGOFF CANCELMODE
Wed Aug 27 11:10:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 1
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 59416
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00010002000000E0
Wed Aug 27 11:25:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 3
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 22064
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00030004000000A7
Wed Aug 27 11:40:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 50810
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000000010000020F
Wed Aug 27 11:54:29 2008
DpHdlDeadWp: restart wp (pid=628) automatically
Wed Aug 27 11:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 18271
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000000010000022E
Wed Aug 27 12:05:54 2008
Network error of client T457, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T457 is 142.42.40.35(42952p.gloscc.gov.uk)
***LOG Q04=> DpRTmPrep, NiBufReceive (2944 RGOODMAN 457 42952p ) [dpxxdisp.c 11831]
Wed Aug 27 12:10:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 1
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 43441
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000100020000012B
Wed Aug 27 12:19:36 2008
ERROR => DpRqCheck: T185 in state TM_SLOT_FREE [dpxxdisp.c 7102]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 6207): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid 185 wp_ca_blk 30 wp_id 1
-IN-- action SEND_TO_WP uid 5668 appc_ca_blk -1 type DIA
-IN-- new_stat WP_HOLD mode 0 len 24 rq_id 9178
Wed Aug 27 12:25:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 2 wp_id 1
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 19953
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000100020000013D
Wed Aug 27 12:40:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 42339
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000002A1
Wed Aug 27 12:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 62670
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000002C5
Wed Aug 27 13:10:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 1
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 14289
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0001000200000162
Wed Aug 27 13:18:38 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 107 / sock 2764
(SI_ECONN_BROKEN/10054; I4; ST; 142.127.10.6:1682) [nixxi.cpp 4424]
Network error of client T270, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T270 is 142.127.10.6(42579p.gloscc.gov.uk)
***LOG Q04=> DpRTmPrep, NiBufReceive (8554 LFEAR 270 42579p ) [dpxxdisp.c 11831]
RM-T270, U8554, 300 LFEAR, 42579p, 13:17:40, M0, W4, FBL5, 2/2
Wed Aug 27 13:25:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 36663
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 000000010000030A
Wed Aug 27 13:34:20 2008
Network error of client T500, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T500 is 142.127.10.10(42580p.gloscc.gov.uk)
***LOG Q04=> DpRTmPrep, NiBufReceive (5476 SHOPKINS01 500 42580p ) [dpxxdisp.c 11831]
Wed Aug 27 13:40:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 56286
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000335
Wed Aug 27 13:51:34 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 31 / sock 1788
(SI_ECONN_BROKEN/10054; I4; ST; 10.48.72.229:3977) [nixxi.cpp 4424]
Network error of client T200, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Aug 27 13:51:39 2008
Client address of T200 is 10.48.72.229(10.48.72.229)
***LOG Q04=> DpRTmPrep, NiBufReceive (8666 SPARAB 200 dtpxp-redani) [dpxxdisp.c 11831]
RM-T200, U8666, 300 SPARAB, dtpxp-redaniel, 13:30:35, M1, W2, WE02, 3/1
Wed Aug 27 13:54:49 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 7164]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3796): [dpxxdisp.c 5401]
-IN-- sender_id APPC_SERVER tid 463 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 10041 appc_ca_blk 26 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 574 rq_id 11721
Wed Aug 27 13:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 12881
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000367
Wed Aug 27 14:09:03 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1460
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3511) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = ACTIVE (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5776)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 7164]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3796): [dpxxdisp.c 5401]
-IN-- sender_id APPC_SERVER tid 132 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 10464 appc_ca_blk 26 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 576 rq_id 30835
Wed Aug 27 14:09:10 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7148
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64998
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:09:30 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:09:50 2008
J2EE server info
start = TRUE
state = STARTED
pid = 11520
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:10:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 32556
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000390
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:10:30 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7532
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:10:50 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:11:10 2008
J2EE server info
start = TRUE
state = STARTED
pid = 10936
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:11:30 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:11:50 2008
J2EE server info
start = TRUE
state = STARTED
pid = 12740
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64994
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:12:10 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:12:30 2008
J2EE server info
start = TRUE
state = STARTED
pid = 6276
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64993
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:12:50 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:13:10 2008
J2EE server info
start = TRUE
state = STARTED
pid = 11400
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64992
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:13:30 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:13:50 2008
J2EE server info
start = TRUE
state = STARTED
pid = 6660
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64991
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:14:10 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:14:30 2008
J2EE server info
start = TRUE
state = STARTED
pid = 5180
argv[0] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = C:\usr\sap\GP1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64990
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=GP1
argv[7] = -DSAPMYNAME=svrshir144_GP1_01
argv[8] = -DSAPPROFILE=C:\usr\sap\GP1\SYS\profile\GP1_DVEBMGS01_svrshir144
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Wed Aug 27 14:14:50 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Wed Aug 27 14:15:10 2008
DpEnvCheckJ2ee: switch off j2ee start flag
Wed Aug 27 14:21:44 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 7164]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3796): [dpxxdisp.c 5401]
-IN-- sender_id APPC_SERVER tid 488 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 10892 appc_ca_blk 26 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len 351 rq_id 57795
Wed Aug 27 14:25:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 63239
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000003AF
Wed Aug 27 14:40:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 25514
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000003DD
Wed Aug 27 14:50:15 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 111 / sock 2804
(SI_ECONN_BROKEN/10054; I4; ST; 142.42.36.70:1640) [nixxi.cpp 4424]
Network error of client T298, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T298 is 142.42.36.70(41017p.gloscc.gov.uk)
***LOG Q04=> DpRTmPrep, NiBufReceive (11632LGILLESPI 298 41017p ) [dpxxdisp.c 11831]
RM-T298, U11632, 300 LGILLESPI, 41017p, 14:49:34, M0, W0, , 2/0
Wed Aug 27 14:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 1 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 54304
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000404
Wed Aug 27 14:59:35 2008
multiple send(115/1): discard outdated response
Wed Aug 27 15:10:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 18334
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000428
Wed Aug 27 15:12:47 2008
ERROR => multiple send of tid 252 (HFANELSA01 , M0) [dpxxdisp.c 11976]
Wed Aug 27 15:23:55 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 34 / sock 1824
(SI_ECONN_BROKEN/10054; I4; ST; 10.48.72.229:1193) [nixxi.cpp 4424]
Network error of client T432, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Aug 27 15:24:00 2008
Client address of T432 is 10.48.72.229(10.48.72.229)
***LOG Q04=> DpRTmPrep, NiBufReceive (11511SPARAB 432 dtpxp-redani) [dpxxdisp.c 11831]
RM-T432, U11511, 300 SPARAB, dtpxp-redaniel, 15:02:54, M0, W2, ME23, 2/1
Wed Aug 27 15:25:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 46023
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000456
Wed Aug 27 15:40:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 1 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 16363
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 0000000100000484
Wed Aug 27 15:50:13 2008
ERROR => multiple send of tid 474 (KLANE , M0) [dpxxdisp.c 11976]
Wed Aug 27 15:55:10 2008
ERROR => AdExecBlk: scratch area too small (30924), opcode 6 [adxx.c 2372]
ERROR => DpAdmHandle: AdExecBlk [dpxxdisp.c 13729]
ERROR => DpRqNoWpHandle: DpAdmHandle [dpxxdisp.c 3700]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5399]
ERROR => BAD REQUEST - Reason: DpAdmHandle failed (line 3701): [dpxxdisp.c 5401]
-IN-- sender_id DISPATCHER tid -1 wp_ca_blk 0 wp_id 0
-IN-- action SEND_TO_WP uid -1 appc_ca_blk -1 type NOWP
-IN-- new_stat WP_HOLD mode 255 len 252 rq_id 45033
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH SET_SYSTEM_USER DP_APPL_SERV_INFO
-IN-- msgkey 00000001000004B7
Please share your views on this issue
Regards
Santosh
Hi Matt,
This problem we are facing with our production system.You are right I searched some notes but was not able to resolve the issue.
I tried to stop database service & SAP services but it doesnot work in my case.Once J2EE is stopped there is no process entry in J2EE process table.
If I will reboot system at OS level & then J2EE engine will also start.this problem we are facing twice in a week.
Anyway i will look into the notes mentioned by you.in the meanwhile it would be helpful to get the advice from expert who faced this issue.
Our J2EE pach level is on SP6.
Regards
Santosh
Similar Messages
-
Hello,
we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
i would like to know what is the thumb rule for adding additional j2ee node?
when is it neccassary to add additional j2ee node?
Regards,
MosheHi,
The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
SAP note: 716604 and upgrade JDK.
SAP note: 723909 -> set correct VM parameters
and if issue persists, then you will need to analyse the application causing teh leak...
SAP note: 1259465: Memory analyser.
Regards,
Hemanth -
Introscope Agent Settings does not show J2EE Nodes
Hi all,
we are using Solultion Manager Diagnostics for 4 systems and everything is all right. We no installed a PI 7.10 system (for migration from PI 7.00) on the same server as the PI 7.00 system is. Agents are running and configuration is almost done, just the last step is missing or not working.
Now I want to configure SMD as well for the PI 7.10 system but I can see the J2EE Nodes on the SMD: Diagnostics Setup -> Managed Systems -> Introscope Agent
I am not sure how we did it the last times, because everything run smooth. One thing I remember, we could not see the second Java Server node of the PI 7.00 system in here as well.
Any Ideas how to do this?
BR MarkusHi Jan,
Could you please tell me how you reloaded the solution in SMD,i mean could you tell me the steps to reload the solution in SMD.
Regards,
Krithi -
Dear all,
i have one primary and two secondary setup
both primary and one secondaryA are running fine. but when i used ./vda-db-status on another secondary B . it showed me down
data node down
actually secondary B was shutdown due to power failure. when we restarted the server it gave us boot error. boot archive..fsck -F ufs /dev/rdisk/....solved the problem
but when we booted it was down..in mysql cluster status. this server is also datanode in cluster.
I checked svcs svc:/application/database/vdadb:core is down showing offline*
in /var/opt/SUNWvda/mysql-cluster/ndb_3.error.log
I found following
Current byte-offset of file-pointer is: 1566
Time: Tuesday 8 June 2010 - 13:08:28
Status: Ndbd file system error, restart node initial
Message: File not found (Ndbd file system inconsistency error, please report a bug)
Error: 2815
Error data: DBLQH: File system open failed. OS errno: 2
Error object: DBLQH (Line: 3083) 0x0000000a
Program: /opt/SUNWvda/mysql/bin/ndbd
Pid: 875
Version: mysql-5.1.37 ndb-7.0.8a
Trace: /var/opt/SUNWvda/mysql-cluster/ndb_3_trace.log.1
***EOM***
Time: Tuesday 8 June 2010 - 13:32:00
Status: Ndbd file system error, restart node initial
Message: File not found (Ndbd file system inconsistency error, please report a bug)
Error: 2815
Error data: DBLQH: File system open failed. OS errno: 2
Error object: DBLQH (Line: 3083) 0x0000000a
Program: /opt/SUNWvda/mysql/bin/ndbd
Pid: 5686
Version: mysql-5.1.37 ndb-7.0.8a
Trace: /var/opt/SUNWvda/mysql-cluster/ndb_3_trace.log.2
***EOM***
Time: Tuesday 8 June 2010 - 13:42:26
Status: Ndbd file system error, restart node initial
Message: File not found (Ndbd file system inconsistency error, please report a bug)
Error: 2815
Error data: DBLQH: File system open failed. OS errno: 2
Error object: DBLQH (Line: 3083) 0x0000000a
Program: /opt/SUNWvda/mysql/bin/ndbd
Pid: 764
Version: mysql-5.1.37 ndb-7.0.8a
Trace: /var/opt/SUNWvda/mysql-cluster/ndb_3_trace.log.3
***EOM***
______________________________________________________________________________________________________________Further i saw Vdadb:core.log
i found following
.........................(logs omitted)
[ Jun 8 13:08:16 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[mycompnay.com]; NDBD_INITIAL_ARG=[]; NDBD_NODE_ID=[3];
MYSQL_BIN=[opt/SUNWvda/mysql/bin];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node... 2010-06-08 13:08:18 [ndbd] INFO -- Configuration fetched from 'mycompnay.com:1186', generation: 1
Arguments: [mycompnay.com ]...
Error
[ Jun 8 13:14:46 Method "start" exited with status 95 ]
[ Jun 8 13:31:35 Leaving maintenance because disable requested. ]
[ Jun 8 13:31:35 Disabled. ]
[ Jun 8 13:31:56 Enabled. ]
[ Jun 8 13:31:56 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[mycompnay.com]; NDBD_INITIAL_ARG=[]; NDBD_NODE_ID=[3];
MYSQL_BIN=[opt/SUNWvda/mysql/bin];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node... 2010-06-08 13:31:57 [ndbd] INFO -- Configuration fetched from 'mycompnay.com:1186', generation: 1
Arguments: [mycompnay.com ]...
Error
[ Jun 8 13:38:27 Method "start" exited with status 95 ]
[ Jun 8 13:38:27 Leaving maintenance because disable requested. ]
[ Jun 8 13:38:27 Disabled. ]
[ Jun 8 13:42:21 Executing start method ("/opt/SUNWvda/lib/vda-db-service start") ]
Configuration:
MGMT_NODE=[0]; NDBD_NODE=[1]; SQL_NODE=[0]; MULTI_HOST_MODE=[1];
NDBD_CONNECTSTRING=[mycompnay.com]; NDBD_INITIAL_ARG=[]; NDBD_NODE_ID=[3];
MYSQL_BIN=[opt/SUNWvda/mysql/bin];
Starting the Sun Virtual Desktop Infrastructure Database service:
- Starting Data Node... 2010-06-08 13:42:22 [ndbd] INFO -- Configuration fetched from 'mycompnay.com:1186', generation: 1
Arguments: [mycompnay.com ]...
Error
[ Jun 8 13:48:50 Method "start" exited with status 95 ]
any ideas -
SDL Link Out of Service - Node down
We keep seeing these RTMT alerts and then receive SDL Link out service or server node down. I have been working with TAC but they are not able to pin point if its a CUCM issue or network issues. I have the network team check the CPU usage during this time and nothing major happening same thing on the CUCM side.
At Tue Oct 28 14:56:48 PDT 2014 on node the following SyslogSeverityMatchFound events generated:
SeverityMatch : Alert
MatchedEvent : Oct 28 14:56:23 PUB local7 1 : 18: PUB: Oct 28 2014 21:56:23.242 UTC : %UC_Location Bandwidth Manager-1-LBMLinkOOS: %[LocalNodeId=1][LocalApplicationID=700][RemoteIPAddress=][RemoteApplicationID=700][LinkID=1:700:SUB02:700][AppID=Cisco Location Bandwidth Manager][ClusterID=EvergreenHospital][NodeID=PUB]: LBM link to remote application is out of service AppID : Cisco Syslog Agent ClusterID
Has anyone experienced this issue? We recently upgraded to 9.x.We are experiencing the exact same thing. There doesn't seem to be anything out of the ordinary or in the logs, but these errors randomly kick off as far as we can tell for no reason.
I opened a TAC case and they related it to CPU load on our Publisher, I bumped it as recommended and the error cleared for a few days, but just came back today.
Anyone have any insight? As I said, doesn't seem to be service impacting, so is it just another 'Cisco Feature'? -
After registering SAPCCMSR agent not able to see J2ee nodes in rz20
Hi,
After registering SAPCCMSR agent on J2ee instance not able to see J2ee nodes in rz20. The ccms_connetor file has the
following error
Feb 26, 2012 8:43:44 AM ...y.monitor.mapping.ccms.Selfmonitoring [SAPEngine_System_Thread[impl:5]_65] Error: Couldn't create self monitoring (java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentException: Method
name is empty.)).
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentEx
ception: Method name is empty.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentEx
ception: Method name is empty.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</Kernel>: com.sap.engine.library.monitor.mapping.ccms.CcmsConnectorException: /Kernel can't be created due to missing parent node(s).
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentException: Method name is empty.)
Feb 26, 2012 8:43:44 AM ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</Services>: com.sap.engine.library.monitor.mapping.ccms.CcmsConnectorException: /Services can't be created due to missing parent node(s).
Can some one help me on this.
ThanksHello Kranthi,
I would suggest you to cross check the steps you have performed to register sapccmsr agent with the following help links and update us.
http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/content.htm
Good Luck.
Thanks,
Siva Kumar -
If UCCX first node down, what features are still available?
Hi all,
I have installed the UCCX 8.5 first node and second node,
and configured to link them up togehter (LAN)
- Created some application for IVR
- Created some resource and CSQ
all working fine
Then... I want to try the HA.
I tried to unplug the first node UCCX ethernet cable (just make it disconnect)
The IVR is still working,
But ... the Agent and Supervisor seems cannot login to the UCCX via CAD/CSD
Do I miss-configure any setting or is that the only feature after the first node down?
Thanks
SamYou need to re-run the CAD Configuration Tool after completing the HA setup. Also you may need to run the PostInstall.exe tool from the CAD install directory on a PC and manually add the HA node IP address.
-
I have a two node rac setup. One Node went down because of hardware issues. And it seems that I cannot connect from client (jdbc) when SCAN gives particular ip.
I receive : ORA-12514, TNS:listener does not currently know of service requested in connect descriptor. If DNS returns the correct ip - everything works fine.
connection string:
jdbc:oracle:thin:@(DESCRIPTION= (LOAD_BALANCE=on) (ADDRESS=(PROTOCOL=TCP)(HOST=testracscan.internal.int)(PORT=1521)) (CONNECT_DATA=(SERVICE_NAME=testdb.internal.int)))
Interfaces show that VIPS and SCANS are assigned correctly on Node 1:
vlan65 Link encap:Ethernet HWaddr 2C:76:8A:4F:B5:CC
inet addr:192.168.2.10 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::2e76:8aff:fe4f:b5cc/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:937195 errors:0 dropped:0 overruns:0 frame:0
TX packets:852745 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:186434457 (177.7 MiB) TX bytes:141217705 (134.6 MiB)
vlan65:1 Link encap:Ethernet HWaddr 2C:76:8A:4F:B5:CC
inet addr:192.168.2.25 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
vlan65:2 Link encap:Ethernet HWaddr 2C:76:8A:4F:B5:CC
inet addr:192.168.2.35 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
vlan65:3 Link encap:Ethernet HWaddr 2C:76:8A:4F:B5:CC
inet addr:192.168.2.30 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
vlan65:4 Link encap:Ethernet HWaddr 2C:76:8A:4F:B5:CC
inet addr:192.168.2.110 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
vlan65:5 Link encap:Ethernet HWaddr 2C:76:8A:4F:B5:CC
inet addr:192.168.2.115 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
[oracle@srvtestdb1 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 03-SEP-2012 15:35:05
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date 29-AUG-2012 15:52:57
Uptime 4 days 23 hr. 42 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/srvtestdb1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.10)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.110)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "testdb.internal.int" has 1 instance(s).
Instance "testdb1", status READY, has 1 handler(s) for this service...
Service "testdbXDB.internal.int" has 1 instance(s).
Instance "testdb1", status READY, has 1 handler(s) for this service...
Service "testdbsvc.internal.int" has 1 instance(s).
Instance "testdb1", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@srvtestdb1 ~]$
SQL> show parameter listener
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.2.110)(PORT=1521))))
remote_listener string testracscan.internal.int:1521
nslookup testracscan.internal.int
Server: 192.168.0.18
Address: 192.168.0.18#53
Name: testracscan.internal.int
Address: 192.168.2.30
Name: testracscan.internal.int
Address: 192.168.2.25
Name: testracscan.internal.int
Address: 192.168.2.35
Problems arise when client ip is resolved to 192.168.2.35 - i get ORA12514.
When IP is resolved to 192.168.2.110 it simply sits ant waits for a moment and then begins to work, and nestat shows:
tcp 0 0 ::ffff:1 192.168.2.5:51685 ::ffff:192.168.2.110:1521 ESTABLISHED
What might be causing this?[grid@srvtestdb1 ~]$ ps -ef|grep tns
root 65 2 0 Aug29 ? 00:00:00 [netns]
grid 4449 1 0 Aug29 ? 00:00:25 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN2 -inherit
grid 4454 1 0 Aug29 ? 00:00:23 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN3 -inherit
grid 4481 1 0 Aug29 ? 00:00:33 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid 37028 1 0 09:38 ? 00:00:00 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN1 -inherit
grid 37901 36372 0 09:45 pts/0 00:00:00 grep tns
[grid@srvtestdb1 ~]$
[grid@srvtestdb1 ~]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
[grid@srvtestdb1 ~]$
[grid@srvtestdb1 ~]$ srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node srvtestdb1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node srvtestdb1
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node srvtestdb1
[grid@srvtestdb1 ~]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node srvtestdb1
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node srvtestdb1
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node srvtestdb1 -
10g RAC Node down Enterprise Manager
Hello
We have a 2 node Oracle 10g RAC Rel2 Linux setup. Enterprise Manager was first stalled on Node1 and we access it using http://node1:5500/em.
This node has a hardware failure and is out of commision at the moment. When I try to connect to http://node2.5500/em it does not work.
I see the dbconsole process is running onthe node2.
How can I use the Enterprise Manager if the node1 is down?
ThanksCan you try deconfig and config again on node 2?
emctl stop dbconsol
emca -deconfig dbcontrol
emca -config dbcontrolSalman -
LMS 4.2 email notifications for node down
I need help configuring an email alert so that when a node (switch, router, etc) is unreachable, i will recieve an email notification. So far i have tried creating an event set then notification group and then email subscription. This does not seem to be exactly what i am looking for. I think this could create alerts for any interface that is unreachable.
thanks!LMS does not works this way unfortunately, and is not able to generate alert/notification for node/device down.
Fault Management manages doesn't manages device as a whole, instead it manages device on aspects of Environment, System and Interface groups.
It can mostly analyse a card down when many of the similar ports go down in one, but generally it will will manage device explicitly for above categories, which is further subdivided into :
Environment : Power Suppoly, Fan and Temp. Sensor
System : Processor and Memory
InterfaceStatus: Port, Interface, IP and Card
The kind of Events if can generate are following and also mentions the situation in which it will be generated:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/Events.html#wp1078033
-Thanks
Vinod -
Datasource Connection Pooling - Per environment or per J2EE node?
Hi all,
I have a question about the JDBC service regarding the connection pooling.
For external datasources, we have specified a max. pool size of 25.
Now, is this value per J2EE server node per Dialog Instance, or is this a global setting?
In other words, say we have 5 dialog instances each with 4 server nodes, do we have pools with a total size of 200 maximum connections, or just 25?
Thanks in advance!
Robin van het HofHi Dagfinn,
The below mentioned exception is thrown the most:
[code]
com.shell.gep.service.employee.jdbc.JDBCEmployeeServiceNew#sap.com/irj#com.shell.gep.service.employee.jdbc.JDBCEmployeeServiceNew#Niels.Dijksman#502#####Thread[PRT-Async 16,5,PRT-Async]##0#0#Fatal##Plain###Unable to execute query: /* com.shell.gep.service.employee.jdbc.JDBCEmployeeServiceNew */SELECT NVL(WWW, 'Y') FROM PROVISIONING.SHELLDETAILS WHERE SAMACCOUNTNAME = ?, cause: Closed Connection#
at com.shell.gep.service.employee.jdbc.JDBCEmployeeServiceNew.doMasterQuery(JDBCEmployeeServiceNew.java:410)#
at com.shell.gep.service.employee.jdbc.JDBCEmployeeServiceNew.internalGetProperty(JDBCEmployeeServiceNew.java:361)#
at com.shell.gep.service.employee.jdbc.JDBCEmployeeServiceNew.getProperty(JDBCEmployeeServiceNew.java:66)#
at com.shell.gep.service.employee.AggregatedEmployeeService.getProperty(AggregatedEmployeeService.java:153)#
at com.shell.gep.service.employee.AggregatedEmployeeService.getProperty(AggregatedEmployeeService.java:153)#
at com.shell.gep.service.employee.EmployeeServiceImpl.getProperty(EmployeeServiceImpl.java:116)#
at com.shell.gep.news.iviews.dynpage.NewsDynPage.getMyExternal(NewsDynPage.java:143)#
at com.shell.gep.news.iviews.dynpage.NewsDynPage.doProcessBeforeOutput(NewsDynPage.java:114)#
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)#
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)#
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)#
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)#
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)#
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)#
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)#
at java.security.AccessController.doPrivileged(Native Method)#
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)#
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)#
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)#
at java.lang.Thread.run(Thread.java:534)#
java.sql.SQLException: Closed Connection#
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)#
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)#
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)#
at oracle.jdbc.driver.OracleConnection.privatePrepareStatement(OracleConnection.java:962)#
at oracle.jdbc.driver.OracleConnection.prepareStatement(OracleConnection.java:869)#
[/code]
So it apears it's an Oracle problem rather than a SAP problem indeed -
Dear DBAs,
for a maintenance reason we had to shutdown the 3 cluster servers (Windows 2003-64bit).
after starting up the master node (the others still down) the windows stuck on the "Applying profile", however if we disconnect this server from the network the server starts.
we noticed that after reconnecting the server to the network, it takes long time to discover the storage disks.
we are planning to move to another master node.
could you please send me a link with the step-by-step on how to move to a new master node.
the database is Oracle 10g v. 10.2.0.4.0
OS: windows 2003-64 bit
your quick reply is highly appreciated.
Regards
Eliewe noticed that after reconnecting the server to the network, it takes long time to discover the storage disks.I am not sure that doing so would decrease the time. You need to check with your n/w guys and storage guys that why its taking time since the same will happen with the new node as well.
we are planning to move to another master node.You need to take a backup of this db and then move it to the new host . Once done, you would need to add nodes to that node . But as said above, find the reason first why you are experiencing slow connectivity?
Aman.... -
Communicate with diffrent j2ee nodes
Hi there
We've got a singleton on a j2ee which runs on about 3 nodes.
Is there any possibility to connect to the other nodes for example invalidating the singleton in all nodes?
Are there some framework-class available on which one we can connect through to get firstly the information how many nodes are available and then go in each one and invalidate the singleton?
(like you can do it in the NWA of the CE Server - "stop on all instances")
Thanks in advance
Regards
MarcoHi Benny
I think this isn't realy my problem.
The JNDI is working on each node yes? Or just on the central-node?
I found some information in this document: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0eb4a790-0201-0010-86b7-c1b26be749d6
But nowhere is written, if the jndi service is only running on the central instance?!
And when i'm accessing the singleton over the jndi (in case there is just one jndi on the central-node) do i've got some problems because of the performance - whilce accessing objects in other nodes and containers?
Thanks in advance for your answer
Regards
Marco -
Hi All,
Oracle 10.2.0
Windows server 2003
My doubt is, In the Oracle RAC server if the there are some connections to the node1 and node2 through some applications.
If node1 is down, Will the existing connections to the node1 will be redirected to the node2 ?
Please Advice..
TIA,If you did configure transparent application failover (TAF) in the tnsnames.ora of the clients, yes.
You can read about TAF in the Net Administrators Manaul at http://tahiti.oracle.com
Sybrand Bakker
Senior Oracle DBA -
SCAN IP and all 2 VIP listner is unavailable for 1+ min when one node down
I have two redhat Linux nodes running the Oracle 11.2.0.3
Everything is OK except, when I powerdow one node (cold or soft reset). the VIP and SCAN lisnter stop working for 1+ minutes. (Using Navicat connection check, all connections are unavailabl for a while)
Is it normal? The problem is the application DB connection timeout is about 20 seconds.Hi,
even though this sounds quite long (especially for a hard kill of the node, not a reboot), it does not matter if you configured your application correctly:
http://www.oracle.com/technetwork/products/clustering/overview/awm11gr2-130711.pdf
Since the application will move to the VIP/SCAN IP running on the second node after 3 sec (connection outbound timeout).
However failover of VIP and SCAN should be in seconds not minutes...
And it should not have an effect on all connections - just the ones going to that VIP/SCAN on that node.
Regards
Sebastian
Maybe you are looking for
-
Can't use BoxLayout more than once in a class?
I have a JPanel inside of a JPanel. I am using a BoxLayout manager on the main JPanel, and I used to use a GridLayout on the sub JPanel. Yesterday I changed the Layout Manager of the subPanel to BoxLayout, and now I get this strange error at runtime.
-
Deskjet 6988, wireless printing not working. Network light blinking.
Deskjet 6988 will only print when connected via USB, used to work wirelessly.....now network light on printer blinks. Please assist.
-
Howw do I import my photos from Adobe Revel to Elements 13?
-
I have the iPhone 4 and just upgraded to IOS 5 today and saw that there is an LED light that can flash for alerts. How do I turn this on?
-
Whar are logical table, Physical table Logical data Source
Hi, Can any one explain me in details what Whar are logical table, Physical table Logical data Source. Any qucik help will be graetly appreciated