J2EE Recommended Patch Cluster fails with Kernel patch 108528-26

As part of the J2EE recommended cluster, I attempted installing patch 108528-26 to my Solaris 8 box (all of which was downloaded from sun.com):
SunOS boedev 5.8 Generic_108528-14 sun4u sparc SUNW,UltraAX-MP
It failed and rolled back as part of the cluster with the following error log:
Package not patched:
PKG=FJSVhea
Original package not installed.
Package not patched:
PKG=FJSVmdb
Original package not installed.
Package not patched:
PKG=FJSVmdbx
Original package not installed.
Package not patched:
PKG=FJSVvplr.us
Original package not installed.
Package not patched:
PKG=FJSVvplu.us
Original package not installed.
Package not patched:
PKG=SUNWcar.d
Original package not installed.
Package not patched:
PKG=SUNWcar.m
Original package not installed.
Package not patched:
PKG=SUNWcar.us
Original package not installed.
Package not patched:
PKG=SUNWcarx.us
Original package not installed.
Package not patched:
PKG=SUNWcpc.us
Original package not installed.
Package not patched:
PKG=SUNWcpcx.us
Original package not installed.
Package not patched:
PKG=SUNWcpr.m
Original package not installed.
Package not patched:
PKG=SUNWcpr.us
Original package not installed.
Package not patched:
PKG=SUNWcprx.us
Original package not installed.
Package not patched:
PKG=SUNWdrr.u
Original package not installed.
Package not patched:
PKG=SUNWdrr.us
Original package not installed.
Package not patched:
PKG=SUNWdrrx.u
Original package not installed.
Package not patched:
PKG=SUNWdrrx.us
Original package not installed.
Package not patched:
PKG=SUNWefcx.u
Original package not installed.
Package not patched:
PKG=SUNWidn.u
Original package not installed.
Package not patched:
PKG=SUNWidnx.u
Original package not installed.
Package not patched:
PKG=SUNWkvm.us
Original package not installed.
Package not patched:
PKG=SUNWkvmx.us
Original package not installed.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Installation of <SUNWarc> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Installation of <SUNWarcx> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Installation of <SUNWcar> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
pkgadd: ERROR: source path </export/home/src/patches/108528-26/SUNWcarx.u/reloc/platform/SUNW,Sun-Blade-100/kernel/misc/sparcv9/platmod> is corrupt
file cksum <38281> expected <38278> actual
pkgadd: ERROR: source path </export/home/src/patches/108528-26/SUNWcarx.u/reloc/platform/SUNW,Sun-Blade-1000/kernel/misc/sparcv9/platmod> is corrupt
file size <4832> expected <4830> actual
file cksum <34048> expected <33987> actual
Installation of <SUNWcarx> partially failed.
Without rebooting, I then downloaded the patch from sunsolve as a separate patch and attempted to load it with patchadd, to no avail but with additional errors (WARNING:) along with the original ones:
Package not patched:
PKG=FJSVhea
Original package not installed.
Package not patched:
PKG=FJSVmdb
Original package not installed.
Package not patched:
PKG=FJSVmdbx
Original package not installed.
Package not patched:
PKG=FJSVvplr.us
Original package not installed.
Package not patched:
PKG=FJSVvplu.us
Original package not installed.
Package not patched:
PKG=SUNWcar.d
Original package not installed.
Package not patched:
PKG=SUNWcar.m
Original package not installed.
Package not patched:
PKG=SUNWcar.us
Original package not installed.
Package not patched:
PKG=SUNWcarx.us
Original package not installed.
Package not patched:
PKG=SUNWcpc.us
Original package not installed.
Package not patched:
PKG=SUNWcpcx.us
Original package not installed.
Package not patched:
PKG=SUNWcpr.m
Original package not installed.
Package not patched:
PKG=SUNWcpr.us
Original package not installed.
Package not patched:
PKG=SUNWcprx.us
Original package not installed.
Package not patched:
PKG=SUNWdrr.u
Original package not installed.
Package not patched:
PKG=SUNWdrr.us
Original package not installed.
Package not patched:
PKG=SUNWdrrx.u
Original package not installed.
Package not patched:
PKG=SUNWdrrx.us
Original package not installed.
Package not patched:
PKG=SUNWefcx.u
Original package not installed.
Package not patched:
PKG=SUNWidn.u
Original package not installed.
Package not patched:
PKG=SUNWidnx.u
Original package not installed.
Package not patched:
PKG=SUNWkvm.us
Original package not installed.
Package not patched:
PKG=SUNWkvmx.us
Original package not installed.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
WARNING: /kernel/sys/sparcv9/rpcmod <no longer a regular file>
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Installation of <SUNWarc> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Installation of <SUNWarcx> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
Installation of <SUNWcar> was successful.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
WARNING: /kernel/sys/sparcv9/rpcmod <no longer a regular file>
pkgadd: ERROR: source path </export/home/src/patches/108528-26/SUNWcarx.u/reloc/platform/SUNW,Sun-Blade-100/kernel/misc/sparcv9/platmod> is corrupt
file cksum <38281> expected <38278> actual
pkgadd: ERROR: source path </export/home/src/patches/108528-26/SUNWcarx.u/reloc/platform/SUNW,Sun-Blade-1000/kernel/misc/sparcv9/platmod> is corrupt
file size <4832> expected <4830> actual
file cksum <34048> expected <33987> actual
Installation of <SUNWcarx> partially failed.
Now I have a box with many J2EE patches but without the proper kernel!!! Halp! jj.

did you try and removed the IDR? I.e: patchrm IDR138540-01 ?
.7/M.

Similar Messages

ROSS CPU didn't work with kernel patch 112233-07

Just noticed my HyperSPARC (ROSS CPU for S10/S20) had problem with kernel patch.
Got 2 X 180Mhz ROSS CPUs running fine with Solaris 9 (kernel level 112233-07) on S20 until applied the Recommended patches set (kernel level 112233-12), once the patches set installed and reboot, the S20 won't boot up anymore and showed some error on the kernel...
Reinstall again the Solaris 9 (kernel level 112233-07), and applied the Recommended patches set without kernel patch 112233-12, system boot up fine without issue.
Was looking around but didn't find anyone else got same issue (even on Sunsolve site) like me, maybe the box is too old to play with...
Cheers,

Oops, put wrong patch ID in subject...

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

Patch 9655006 failed with code 135 when applying to Oracle Restart

Hi all,
I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
Everything is OK for grid applying with success.
When I apply this patch to oracle db home, I get :
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Argument(s) Error... Given 'ocmrf' file does not exists.
Please check the arguments and try again.
OPatch failed with error code 135
I've given the complete path and filename (same as for grid applying).
I've found A document [ID 1283954.1], but not useful in my case.
Any ideas for workaround ?
TIA
yang
ps. this does not occur when applying to a RAC with 2 nodes.

yang wrote:
Hi all,
I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
Everything is OK for grid applying with success.
When I apply this patch to oracle db home, I get :
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Argument(s) Error... Given 'ocmrf' file does not exists.
Please check the arguments and try again.
OPatch failed with error code 135
I've given the complete path and filename (same as for grid applying).
I've found A document [ID 1283954.1], but not useful in my case.
Any ideas for workaround ?
TIA
yang
ps. this does not occur when applying to a RAC with 2 nodes.Hello Yang,
Could you try it again with debug info? Before you run the opatch, run the following:
$ set OPATCH_DEBUG=TRUE; export OPATCH_DEBUG
Regards
Gokhan

Problem with kernel patch 127128-11

I am a bit stomped trying to install this patch successfully.
I log into single user mode.
The patch file is currently located in "/var/sadm/spool"
when I run "patchadd 127128-11" i get the following:
"Patch 127128-11 failed to install due to a failure produced by pkgadd."
============================================================
When I try installing the patch using smpatch with: "smpatch add -i 127128-11"
I get the following error:
"Patch 127128-11 failed to install due to a failure produced by pkgadd."
"PaTch_MsG 23 Patch number 127128-11 cannot be applied until all restricted patches are backed out."
"warning: /usr/bin/disable <no longer a symbolic link>
"warning: /usr/bin/enable <no longer a symbolic link>
"warning: /usr/sbin/reject <no longer a symbolic link>
"warning: /usr/lib/print/psm-lpd.so <no longer a regular file>
"warning: /usr/ucb/lpc <no longer a regular file>
"warning: /usr/ucb/lptest <no longer a regular file>
====================================================
I am still troubleshooting but does anyone have any pointers they would like to share?
Thanks and look forward to your replies

Hi,
I have the same problem and was wondering if anyone had a resolution to it?
Thanks
John

Patch p11879896_112020_Generic failed with req comp missing error

Hi,
Applying the subject patch on Linux 32 with
opatch apply -invPtrLoc /u01/app/oraInventory/oraInst.loc
failed (with the message
Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ] ),
the debug follows below. Any idea?
Thank you.
Anatoliy
_osArch is
/u01/app/oracle/product/11.2.0/home11gR2/jdk/bin/java -mx96m -cp /u01/app/oracle/product/11.2.0/home11gR2/OPatch/ocm/lib/emocmutl.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/share.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/srvm.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/orai18n-mapping.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/xmlparserv2.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatch.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchutil.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchprereq.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchactions.jar: -DOPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2 -DOPatch.DEBUG=true -DOPatch.RUNNING_DIR=/u01/app/oracle/product/11.2.0/home11gR2/OPatch oracle/opatch/OPatch apply -invPtrLoc /u01/app/oraInventory/oraInst.loc
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
CmdLineParser::initRuntimeOptions()
Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$StringArguments
There are 7 fields defined in this class.
adding option "fp"
adding option "dp"
adding option "fr"
adding option "dr"
adding option "mp"
adding option "phbasedir"
adding option "phbasefile"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$BooleanArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$BooleanArguments
There are 2 fields defined in this class.
adding option "delay_link"
adding option "cmd_end"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$IntegerArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$IntegerArguments
There are 2 fields defined in this class.
adding option "integerarg1"
adding option "integerarg2"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringtegerArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$StringtegerArguments
There are 5 fields defined in this class.
adding option "stringtegerarg1"
adding option "stringtegerarg2"
adding option "ps"
adding option "mp"
adding option "xmlinput"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$DoubleArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$DoubleArguments
There are 2 fields defined in this class.
adding option "doublearg1"
adding option "doublearg2"
Checking on class oracle.opatch.opatchutil.CmdLineOptions$RawStringArguments
Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$RawStringArguments
There are 1 fields defined in this class.
adding option "cmd"
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession"
initializing String option 0, fp
initializing String option 1, dp
initializing String option 2, fr
initializing String option 3, dr
initializing String option 4, mp
initializing String option 5, phbasedir
initializing String option 6, phbasefile
done init. String arg.
initializing Boolean option 0, delay_link
initializing Boolean option 1, cmd_end
done init. Boolean arg.
initializing Integer option 0, integerarg1
initializing Integer option 1, integerarg2
done init. Integer arg.
initializing StringTeger option 0, stringtegerarg1
initializing StringTeger option 1, stringtegerarg2
initializing StringTeger option 2, ps
initializing StringTeger option 3, mp
initializing StringTeger option 4, xmlinput
done init. SringTeger arg.
initializing Double option 0, doublearg1
initializing Double option 1, doublearg2
done init. Double arg.
initializing RawString option 0, cmd
done init. RawString arg.
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession", done.
CmdLineParser::initRuntimeOptions()
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$StringArguments
There are 3 fields defined in this class.
adding option "phbasedir"
adding option "patchids"
adding option "phbasefile"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$BooleanArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$BooleanArguments
There are 2 fields defined in this class.
adding option "booleanarg1"
adding option "booleanarg2"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$IntegerArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$IntegerArguments
There are 2 fields defined in this class.
adding option "integerarg1"
adding option "integerarg2"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringtegerArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$StringtegerArguments
There are 2 fields defined in this class.
adding option "stringtegerarg1"
adding option "stringtegerarg2"
Checking on class oracle.opatch.opatchprereq.CmdLineOptions$DoubleArguments
Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$DoubleArguments
There are 2 fields defined in this class.
adding option "doublearg1"
adding option "doublearg2"
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession"
initializing String option 0, phbasedir
initializing String option 1, patchids
initializing String option 2, phbasefile
done init. String arg.
initializing Boolean option 0, booleanarg1
initializing Boolean option 1, booleanarg2
done init. Boolean arg.
initializing Integer option 0, integerarg1
initializing Integer option 1, integerarg2
done init. Integer arg.
initializing StringTeger option 0, stringtegerarg1
initializing StringTeger option 1, stringtegerarg2
done init. SringTeger arg.
initializing Double option 0, doublearg1
initializing Double option 1, doublearg2
done init. Double arg.
CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession", done.
reqVer For using getEnv() = 10.2.0.4.0
curVer = 11.2.0.1.0
Current Ver later than required? :true
Current Ver equals required? :false
Checking EMDROOT using OUI's API...
CmdLineParser.processOPatchProperties() begins
CmdLineParser.processOPatchProperties() ends
OUIReplacer::runEnvScript() called
SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Input Stream
SystemCall:RuntimeExec(cmds, runDir): Started thread to read Input Stream
SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Error Stream
ReaderThread::run(): Stream InputStream about to be read
SystemCall:RuntimeExec(cmds, runDir): Started thread to read Error Stream
SystemCall:RuntimeExec(cmds, runDir): GOING into process.waitFor()
ReaderThread::run(): Stream ErrorStream about to be read
ReaderThread::run(): Stream InputStream reading completed
ReaderThread::run(): Stream ErrorStream reading completed
SystemCall:RuntimeExec(cmds, runDir): process.waitFor() is OVER
SystemCall:RuntimeExec(cmds, runDir): Error stream thread joined successfully
SystemCall:RuntimeExec(cmds, runDir): Input stream thread joined successfully
OUIReplacer::setKeyValue() called
OPatchSession::main()
Environment:
OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
oracle.installer.oui_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui
oracle.installer.library_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui/lib/linux
oracle.installer.startup_location=/u01/app/oracle/product/11.2.0/home11gR2/oui
OPatch.PLATFORM_ID=
os.name=Linux
OPatch.NO_FUSER=
OPatch.SKIP_VERIFY=null
OPatch.SKIP_VERIFY_SPACE=null
oracle.installer.clusterEnabled=false
TRACING.ENABLED=TRUE
TRACING.LEVEL=2
OPatch.DEBUG=true
OPATCH_VERSION=11.1.0.6.6
Bundled OPatch Property File=properties
Minimum OUI version: 10.2
OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
Stand-Alone home : false
Environment:
OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
oracle.installer.oui_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui
oracle.installer.library_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui/lib/linux
oracle.installer.startup_location=/u01/app/oracle/product/11.2.0/home11gR2/oui
OPatch.PLATFORM_ID=
os.name=Linux
OPatch.NO_FUSER=
OPatch.SKIP_VERIFY=null
OPatch.SKIP_VERIFY_SPACE=null
oracle.installer.clusterEnabled=false
TRACING.ENABLED=TRUE
TRACING.LEVEL=2
OPatch.DEBUG=true
OPATCH_VERSION=11.1.0.6.6
Bundled OPatch Property File=properties
Minimum OUI version: 10.2
OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
Stand-Alone home : false
Oracle Home : /u01/app/oracle/product/11.2.0/home11gR2
Central Inventory : /u01/app/oraInventory
from : /u01/app/oraInventory/oraInst.loc
OPatch version : 11.1.0.6.6
OUI version : 11.2.0.1.0
OUI location : /u01/app/oracle/product/11.2.0/home11gR2/oui
Log file location : /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch2012-01-19_04-10-13AM.log
Patch history file: /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch_history.txt
OUISessionManager::instantiate()
lockCentralInventory(): OUISessionManager::lockCentralInventory() will retry 0 times with 120-second interval to get an Inventory lock.
OUISessionManager::lockCentralInventory() try round # 1
OUISessionManager::setupSession()
OUISessionManager::setupSession() instantiates a OUIInventorySession obj.
OUISessionManager::setupSession() init. the session
OUISessionManager::setupSession() sets up READ-ONLY session
OUISessionManager::setupSession() done
OUISessionManager::lockCentralInventory() set up session OK
reqVer = 10.2
curVer = 11.2.0.1.0
Current Ver later than required? :true
Current Ver equals required? :false
ApplySession::process()
ApplySession::process(): loading patch object.
ApplySession::loadAndInitPatchObject()
PatchObject(patchLocation)
PatchObject::PatchObject looks for the actions file /u01/app/oraInventory/etc/config/actions.xml
PatchObject::PatchObject looks for the inventory file /u01/app/oraInventory/etc/config/inventory.xml
parserXMLFile : start
parserXMLFile : start
Bugs fixed by this patch 11879896:
11879896: SMPSSE : DATABASE PERFORMANCE OVERVIEW DOESNT WORK ON MAC/LINUX
PatchObject::setPreReadMeAction: readMeFile = /u01/app/oraInventory/custom/pre.txt
noOp = true
fileContent =
PatchObject::setPreScriptAction: [PreScriptAction:-------------------------------
no-op.=true, fileLoc=/u01/app/oraInventory/custom/scripts/pre
Pre script is not present.-----------------------------------------------]
PatchObject::setPostReadMeAction: readMeFile = /u01/app/oraInventory/custom/post.txt
noOp = true
fileContent =
PatchObject::setPostScriptAction: [PostScriptAction:------------------------------
no-op.=true, fileLoc=/u01/app/oraInventory/custom/scripts/post
Post script not present.-----------------------------------------------]
PatchObject::setInitReadMeAction: readMeFile = /u01/app/oraInventory/custom/init.txt
noOp = true
fileContent =
PatchObject::setInitScriptAction: [InitScriptAction:-------------------------------
no-op.=true, fileLoc=/u01/app/oraInventory/custom/scripts/init
Init script not present.-----------------------------------------------]
ApplySession applying interim patch '11879896' to OH '/u01/app/oracle/product/11.2.0/home11gR2'
ApplySession::processLocal()
OPatchEnv:
[OPatchEnv: OracleHome="/u01/app/oracle/product/11.2.0/home11gR2", force= false, report= false, inv. mod.= true, system mod.= true, local mode= false, lsinv all= false, lsinv detail= false, lsinv patch= false, nolink= false, Retry=30, Delay=120, CallerName=OPatch, CallerVersion=11.1.0.6.6, SessionType=apply, JdkLoc=/u01/app/oracle/product/11.2.0/home11gR2/jdk, JreLoc=/u01/app/oracle/product/11.2.0/home11gR2/jre/1.4.2, OracleHome via -oh=, OracleHome via env.=/u01/app/oracle/product/11.2.0/home11gR2, OracleHome via response file=, OPatch recognised InvPtrLoc=/u01/app/oraInventory/oraInst.loc, User specified InvPtrLoc=/u01/app/oraInventory/oraInst.loc, No relink=false, Patch ID used in Rollback=, Patch ID with OPack timestamp=, PreOpt=, PostOpt=, OSName=Linux, IsWindows=false, .patch_storage=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage, .patch_storage/<ID>=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/, Whole patch is saved to=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//original_patch, Backup for Restore path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//backup, Backup for Rollback path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//files, FilesMap info from=/u01/app/oracle/product/11.2.0/home11gR2/inventory/oneoffs/<Patch_ID>, PatchLoc=/u01/app/oraInventory, SyntaxErrorMsg= ]
Process InitReadMeAction()
InitReadMeAction::catFile() is a no-op
InitScriptAction::process() is a no-op
Running Prerequisite check "CheckApplicableProduct"...
PrereqAPI::checkApplicableProduct
PrereqAPI::checkStandAloneHome())
Prereq checkApplicableProduct passed
OPatch checks if the patch is applicable on this home product type
ApplySession::setupPatchStorage()
ApplySession::processLocal() load the inventory
OracleHomeInventory::createInventoryObj()
OracleHomeInventory::createInventoryObj() gets OUIInventorySession object
Locker::lock()
calling lockCentralInventory()
OUISessionManager::getInventorySession()
Caller Details:
Caller Name : OPatch Caller Version : 11.1.0.6.6 Requested Read-only access : false Oracle Home : /u01/app/oracle/product/11.2.0/home11gR2
OUISessionManager::instantiate()
lockCentralInventory(): OUISessionManager::lockCentralInventory() will retry 30 times with 120-second interval to get an Inventory lock.
OUISessionManager::lockCentralInventory() try round # 1
OUISessionManager::setupSession()
OUISessionManager::setupSession() instantiates a OUIInventorySession obj.
OUISessionManager::setupSession() init. the session
OUISessionManager::setupSession() sets up READ-WRITE session
OUISessionManager::setupSession() done
OUISessionManager::lockCentralInventory() set up session OK
OUISessionManager::register()
Registering the caller : OPatch
Locker::lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage exists, no need to mkdir.
Locker::lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free exists, will delete file.
Locker::lock() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
OracleHomeInventory::createInventoryObj() gets OUIInstallAreaControl object
OracleHomeInventory::createInventoryObj() gets OUIInstallInventory object
OracleHomeInventory::createInventoryObj() gets OUIOracleHomeInfo object
OracleHomeInventory::createInventoryObj() construction done
OracleHomeInventory::load()
OracleHomeInventory::load() gets a Vector of all product entries
OracleHomeInventory::load() gets a Vector of all one-off entries
OracleHomeInventory::load() begins to process raw data from OUI to build up OPatch primitive classes
Rac::getInstance()
initializing racType
Rac::getClusterNodes()
calling OiiOracleHomeInfo::getNodeList()
OiiiOracleHomeInfo::getNodeList() returned 0 elements.
RAC::getClusterNodes() returned a list of 0 elements.
User did not use -no_inventory, so why clusterNodes are empty?
clusterNodes is null or empty, set racType to NO_RAC
checkIfSidAddition()
OracleHomeInventory::load()
OracleHomeInventory::load() gets a Vector of all product entries
OracleHomeInventory::load() gets a Vector of all one-off entries
OracleHomeInventory::load() begins to process raw data from OUI to build up OPatch primitive classes
ApplySession::processConflict()
PrereqAPI::checkConflictAgainstOHWithDetail()
Number of Oneoffs in the Oracle Home : 0
PrereqAPI::checkConflictAgainstOH()
List of patches on which the InterConflict prereq runs are :
11879896
OneOffEntry::getBugIDsFixed()
OneOffEntry::getBugIDsFixed() returns 1 bugs.
There are no conflicts/supersets.
Prereq checkConflictAgainstOHWithDetail Passed
Run all the prereqs related to apply.
Running prerequisite checks...
Running prerequisite check "CheckForInputValues" ...
PrereqAPI::checkForInputValues()
Input values is present for the all the actions of the given patches.
Running prerequisite check "CheckSystemSpace" ...
PrereqAPI::checkSystemSpace()
Finding the total space needed...
Total space needed for the patches are: 11865356
Checking if enough space is present on the disk...
Required amount of space is availale on the disk.
Prereq checkSystemSpace Passed
Enough system space is available.
Running prerequisite check "CheckPatchApplicableOnCurrentPlatform" ...
PrereqAPI::checkPatchApplicableOnCurrentPlatform()
Reading the platforms for patch11879896
Genereic Platform ID 0is specified for patch : 11879896
All the given patches are applicable on the current platform.
Running prerequisite check "CheckSystemCommandAvailable" ...
PrereqAPI::checkSystemCommandAvailable()
Rules::shouldSearchOrInvokeFuser()
user didn't set OPATCH_NO_FUSER but executable list is either null or empty, return false.
PatchObject: Patch will need to following commands:
Need fuser archive make mkpatch sqlplus ptlpatch
false false false false false false
Have fuser archive make mkpatch sqlplus ptlpatch
true true true true true true
All the required commands are available.
Prereq checkSystemCommandAvailable Passed
All the required system commands are present.
Running prerequisite check "CheckActiveFilesAndExecutables" ...
PrereqAPI::checkActiveFilesAndExecutables()
Invoking fuser on the executable list...
getCommandInPropertyFiles(): looking up command "fuser" in property file "properties"
Path in merged property files: /sbin:/usr/sbin:/usr/local/sbin
check on "/sbin/fuser"
found "/sbin/fuser"
getCommandInPropertyFiles(): looking up command "fuser" in property file "properties"
Path in merged property files: /sbin:/usr/sbin:/usr/local/sbin
check on "/sbin/fuser"
found "/sbin/fuser"
There are no active executables.
Prereq checkActiveFilesAndExecutables Passed
None of the executables are active.
Running prerequisite check "CheckApplicable" ...
PrereqAPI::checkApplicable() checking if each Action is applicable or not
PrereqAPI::checkComponents()
PrereqAPI::checkComponents searches for required compoments.
OracleHomeInventory::haveComponents()
there are 1 components to check.
Patch Component (component to check) is "oracle.sysman.console.db", "11.2.0.2.0", required = "true"
OracleHomeInventory::haveComponents() : installInventory.getCompInvEntries() on "oracle.sysman.console.db", homeIndex = "1" returns 1 components.
Process installed component "oracle.sysman.console.db", version "11.2.0.1.0"
Check installed product: name="oracle.sysman.console.db", ver="11.2.0.1.0"
Installed Comp >< Patch Comp:
Installed Comp Version later than Patch Comp = false
Installed Comp can replace Patch Comp = false
Install Comp Version equals or is later than Patch Comp: false
Req. comp. not in OH inventory: oracle.sysman.console.db, 11.2.0.2.0
Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ]
PrereqAPI::checkComponents searches for optional compoments.
OracleHomeInventory::haveComponents()
OracleHomeInventory::haveComponents() gets an empty list. Nothing to do, return empty list back.
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ]
System intact, OPatch will not attempt to restore the system
Locker::release()
OUISessionManager::unRegister()
Un-Registering the caller : OPatch
Locker::release() deletes /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
Locker::release() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free
Cleaning up the directory : "/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_unzip"...
OPatch failed with error code 74

Helios,
Looks like I should not apply this patch, it assume the version of 11.2.0.2, I am on 11.2.0.1.
What took me off a little was this statement me in the BUG:12317756 - DBCONSOLE PERFORMANCE PAGE NO LONGER DISPLAYS ON LINUX
"it used to work in previous versions including 11.2.0.1"
and this is not true for me - I have 11.2.0.1. and it is not working - the graph can not be displayed.
So I guess I am back to the original question I was asking about in my other post. Let me see if other 2 Notes you provided will take me to any other patch
Thank you
Anatoliy

Install Recommended Path Cluster Fails

When I try to install the patch cluster on a new install I get two kinds of failures depending on what I am trying to do.
I am installing on a 2900 and the Solaris 2.10 (3/05)
If I use the nosave option then I get a failure code of 45
If I don't use the nosave option I get this:
ld.so.1: zonename: fatal: relocation error: file /sbin/zonename: symbol zonecfg_is_scratch: referenced symbol not found
Can someone tell me what is going on?

I had the same error yesterday, but only in a zone, not the global one.
Here is how I solved my problem:
FROM THE LOCAL ZONE:
# ldd /sbin/zonename
libzonecfg.so.1 => /usr/lib/libzonecfg.so.1
libc.so.1 => /lib/libc.so.1
libsocket.so.1 => /lib/libsocket.so.1
libnsl.so.1 => /lib/libnsl.so.1
libxml2.so.2 => /usr/lib/libxml2.so.2
libmp.so.2 => /lib/libmp.so.2
libmd5.so.1 => /lib/libmd5.so.1
libscf.so.1 => /lib/libscf.so.1
libpthread.so.1 => /lib/libpthread.so.1
libz.so.1 => /usr/lib/libz.so.1
libm.so.2 => /lib/libm.so.2
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
/platform/SUNW,Sun-Fire-V240/lib/libc_psr.so.1
/platform/SUNW,Sun-Fire-V240/lib/libmd5_psr.so.1
I noticed 2 .so files the were local to the zone (in /usr). Since the "zonename" command worked fine in the global zone, I suspected corrupted librairies.
FROM THE GLOBAL ZONE:
bash-3.00# diff /usr/lib/libzonecfg.so.1 /mnt/ms012/root/usr/lib/libzonecfg.so.
1
Binary files /usr/lib/libzonecfg.so.1 and /mnt/ms012/root/usr/lib/libzonecfg.so.1 differ
So here is my problem. I just took the .so file from the global zone to the local one.
bash-3.00# cp /usr/lib/libzonecfg.so.1 /mnt/ms012/root/usr/lib
bash-3.00# zlogin ms012
[Connected to zone 'ms012' pts/1]
Last login: Tue Jan 22 10:33:33 on pts/1
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
*# zonename*
ms012
Voil�! the zonename command works fine again. After that, I did a clear on all services tagged in maintenance state in svcs -a.

Installing OEL on pavilion dv7 4054CA failing with kernel panic

I am trying to install OEL 4.8 (5.5 gives errors too but not as details as 4.8 )on pavilion dv7 4054CA I7 4-core/8 thread laptop but the installation terminates shortly with kernel panic. I gathered the below errors from the screen:
kernel panic - not syncing
drivers/acpi/ec.c:162
spin_is_locked on unintiialized spinlock
acpi-0352
acpi-1134
acpi-0691 : *** Error: acpi_ev_ype_dispatch
It looks like a CPU issue. My laptop is brand new and works fine and I want to install Linux on it.
So any one can help on this?
Thanks.

Oracle Linux, like all Linux for Enterprise systems, was developed for server hardware and will most likely have trouble to fully support laptops or desktop PC systems. Even if you get the system installed, you may run into trouble with proper support for laptop power management, touchpad, video and wireless support.
A good alternative to run Oracle Linux, or Enterprise Linux on a Laptop is Oracle Virtualbox. It allows you to install multiple common operating systems without the need to repartition your harddrive or jeopardize your primary operating system. Virtualbox is free. More info can be found here http://www.virtualbox.org. If you would like to use Linux as your primary OS or dual-boot, better consider a desktop Linux system like Fedora, Ubuntu or SUSE office desktop - you will be much happier with it. Please note that Oracle Express will easily install and support desktop Linux, but Oracle RDBMS does only support Enterprise Linux versions and will require special attention to get installed on Linux desktops.
In order to start OEL from your computer and work-around the issue you are experiencing, you might try to specify boot parameters, such as acpi=ht or acpi=off
http://www.cyberciti.biz/tips/10-boot-time-parameters-you-should-know-about-the-linux-kernel.html
Edited by: Markus Waldorf on Oct 1, 2010 3:44 AM

[Solved] kernel 2.6.28.1 compilation fails with reiser4 patch

Hi,
has anyone had problems compiling the latest kernel with the reiser4 patch?
The patching process itself completes successfully apart from this part:
patching file include/linux/fs.h
Hunk #1 succeeded at 1372 (offset 3 lines).
Hunk #2 succeeded at 1811 (offset 3 lines).
patching file mm/filemap.c
While the compilation fails here
CC fs/reiser4/plugin/file/file_conversion.o
fs/reiser4/plugin/file/file_conversion.c: In function 'reiser4_write_begin_careful':
fs/reiser4/plugin/file/file_conversion.c:689: error: implicit declaration of function '__grab_cache_page'
fs/reiser4/plugin/file/file_conversion.c:689: warning: assignment makes pointer from integer without a cast
make[2]: *** [fs/reiser4/plugin/file/file_conversion.o] Error 1
make[1]: *** [fs/reiser4] Error 2
make: *** [fs] Error 2
Or is it just me doing something wrong?
Last edited by moz (2009-01-23 13:08:27)

moz wrote:
Hi,
has anyone had problems compiling the latest kernel with the reiser4 patch?
The patching process itself completes successfully apart from this part:
patching file include/linux/fs.h
Hunk #1 succeeded at 1372 (offset 3 lines).
Hunk #2 succeeded at 1811 (offset 3 lines).
patching file mm/filemap.c
While the compilation fails here
CC fs/reiser4/plugin/file/file_conversion.o
fs/reiser4/plugin/file/file_conversion.c: In function 'reiser4_write_begin_careful':
fs/reiser4/plugin/file/file_conversion.c:689: error: implicit declaration of function '__grab_cache_page'
fs/reiser4/plugin/file/file_conversion.c:689: warning: assignment makes pointer from integer without a cast
make[2]: *** [fs/reiser4/plugin/file/file_conversion.o] Error 1
make[1]: *** [fs/reiser4] Error 2
make: *** [fs] Error 2
Or is it just me doing something wrong?
It is a well known issue

Backup fail after kernel patches updated

Hello friends
i have update kernel pathes. then backup is failing cont. now my patch level is 114.
im getting error please suggest.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000235, user ID BASIS1)
Execute logical command BRCONNECT On host sapodev
Parameters: -u / -jid STATS20080731152625 -c -f stats -t ALL
BR0801I BRCONNECT 7.00 (11)
BR0805I Start of BRCONNECT processing: cdymghmx.sta 2008-07-31 15.26.27
BR0252E Function fopen() failed for '/oracle/SAD/sapcheck/connSAD.log' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/SAD/sapcheck/connSAD.log failed
BR0806I End of BRCONNECT processing: cdymghmx.sta2008-07-31 15.26.31
BR0280I BRCONNECT time stamp: 2008-07-31 15.26.31
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
thanks & regards
sachin

Hi,
I think some of the answers are partially correct.
For the full and correct solution you must
> Check the owner, group, and access authorizations for BR*Tools and SAPDBA in accordance with Note [113747|http://service.sap.com/sap/support/notes/113747].

Check Db fails after kernel patch update

Hi,
I've updated kernel 710 to the latest patch "159" on my PI 7.10 system, however now Check DB fails when scheduled from DB13 with a
"Scheduling failed" error.
We have SQL 2005 & I'm able to execute the job succesfully via the SQL Managemnt console.
Also, all the other background jobs are working just fine.
Pls. help.
Thanks,
Saba.
Edited by: Rajeev Ganju on Jul 22, 2009 2:37 PM

Hello,
Since I'm on SQL, I use DB13 just for Check DB.
I've tried deleting everything & recreating the schedule, but it has'nt helped.
Even after rescheduling, SM37 doesnt reflect the scheduled jobs.
Thanks,
Saba.
Edited by: Saba Sheikh on Jul 23, 2009 9:21 AM

VM creation on a cluster fails with Internal error code: 0x80990C1D

I am getting the following error when creating a VM from template on a 2012 R2 cluster:
Error (3101)
VMM failed to mount virtual hard disk (VHD) file XXXX.vhdx on the XXXX server. A timeout occurred.
Internal error code: 0x80990C1D
Recommended Action
Open Services to make sure the startup type for Virtual Disk service is set to manual or automatic. Ensure that the service can start and then try the operation again.
The errer occurs while running "Install VM Components" task. I did check services on the host and all is running as expected. The same template works without problem on non-clustered hosts, but fails two out of three times on HV cluster with
CSV storage on FC SAN. I am running SCVMM 2012 R2 UR3.
Any ideas what may cause this issue?
Thanks
Gleb.

Hi,
it's a strentgh issue. I don't have any certain information on the hand but I am just thinking out loud now. Maybe it helps.
If it fails at "Install VM Components" this would mean that the problem occurs during injecting or ejecting the integration services. I am right now not sure if VMM injects the integration services as an ISO file or as an vhd file. The second option is also
possible.
From this point of view my question would be;
1) Are you creating the VM from a blank disk with an ISO OS file attached ? If yes
2) Are you experienceing the same problem with an syspreped vhd or vhdx file too ?
3) How many VM's are running on your Cluster Nodes ?
4) Are there any differences in the behavior when you select a different cluster node as destination host during the creation of a VM from template ?
5) What's the workload on your cluster nodes right now disk, memory, cpu ?
Regards,
Cengiz Kuskaya

How to manually install the Solaris Patch SunOS 5.10_x86: Kernel Patch ?

Same as subject.

download the patch from sunsolve.
unzip it
patchadd <patchnumber>
reboot immediately.
The recommended procedure is to do it with the machine in single user mode.
But usually making the machine as quiescent as possible eg killing of daemons and runnin g jobs is sufficient.

Installing Print Drivers on Server 2008 R2 cluster - Failing with error 0x000000006be

Hello,
I'm currently working with a client that has a Cluster that has 24 servers with 84 resources. This cluster is dedicated to printing only. They have multiple types of printer brands and various different models of each brand. The problem is when they try
to install a Xerox GPD PS, PCL, PCL6 3.3 driver which is the newest driver it has issues with the install with
"An unexpected error occurred in the print driver. Close the current driver window and retry the operation"
The other errror is
"Unable to install printer. Operation could not be completed (error 0x00006be)"
This happens on all of the clusters and physical machines. What can i do to look and find where the problem lies?

Here are some of the windows event logs
Faulting application name: PrintIsolationHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3b1
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0x40000015
Fault offset: 0x000000000002a84e
Faulting process id: 0x1eb4
Faulting application start time: 0x01cf80152f074a2e
Faulting application path: C:\Windows\system32\PrintIsolationHost.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6da43fee-ec08-11e3-9d62-0050569e0008
A device or program has requested attention. Device or application: C:\Windows\system32\PrintIsolationHost.exe. Message title: Microsoft Visual C++ Runtime Library.
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: PrintIsolationHost.exe
P2: 6.1.7600.16385
P3: 4a5bd3b1
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: 40000015
P8: 000000000002a84e
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_PrintIsolationHo_e4795317f6faacc7b641e8555e562e8adea4f1_13a9d52b
Analysis symbol:
Rechecking for solution: 0
Report Id: 6ca58cce-ec08-11e3-9d62-0050569e0008
Report Status: 4
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level.
Change the authentication level to Pkt_Privacy and run the script or application again.
Faulting application name: PrintIsolationHost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3b1
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0x40000015
Fault offset: 0x000000000002a84e
Faulting process id: 0x1eb4
Faulting application start time: 0x01cf80152f074a2e
Faulting application path: C:\Windows\system32\PrintIsolationHost.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6da43fee-ec08-11e3-9d62-0050569e0008
A device or program has requested attention. Device or application: C:\Windows\system32\PrintIsolationHost.exe. Message title: Microsoft Visual C++ Runtime Library.
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: PrintIsolationHost.exe
P2: 6.1.7600.16385
P3: 4a5bd3b1
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: 40000015
P8: 000000000002a84e
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_PrintIsolationHo_e4795317f6faacc7b641e8555e562e8adea4f1_13a9d52b
Analysis symbol:
Rechecking for solution: 0
Report Id: 6ca58cce-ec08-11e3-9d62-0050569e0008
Report Status: 4
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level.
Change the authentication level to Pkt_Privacy and run the script or application again.
Under system
Application popup: Microsoft Visual C++ Runtime Library :
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Application popup: Microsoft Visual C++ Runtime Library :
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.

Solaris 10 U4 and kernel patches

When I install a fresh U4 machine, I then (as I always do) apply the recommended patch cluster. U4 has kernel patched to 120011-14. In the patch cluster, there are kernel patches 118833-36 and also 120011-14. When I run the patch cluster, it installs 118833-36! Isn't this older than the kernel on there? Shouldn't both 118833-36 and 120011-14 BOTH not install as the kernel is already at level 120011-14. The cluster gets to 118833-36 installs that and then of course every patch after that one fails as the machine is waiting for a reboot.

KJP 137138-09 should be ok with cpquary3 driver 1.9.1. KJP 137138 introduced new feature which does not allow misaligned pointer mutexes to work and panics the system. with revision 07 SUN introduced a new environment variable as a for applications which cannot be ported easily "6729759 need to accommodate non-8-byte-aligned mutexes".
This is documented in alert 244606 "The resolution for OpenSolaris releases sets _THREAD_LOCKS_MISALIGNED to 0. This is to ensure that any faulty applications fail and are identified. To allow such applications to continue to work on OpenSolaris releases based upon snv_96 or later, the environment variable _THREAD_LOCKS_MISALIGNED must be set to 1." For this to work you need to have revision 09 of this KJP applied.
Can you post the stack trace so i can have a look at it. I guess you have another application which uses unaligned mutexes.
A pkginfo of the cpquary3 package would also be useful.
-Marco

J2EE Recommended Patch Cluster fails with Kernel patch 108528-26

Similar Messages

Maybe you are looking for