J2EE Startup Issue - XI
Hi,
System hang occured while configuring JCO RFC Provider AI_RUNTIME_XI in Visual Admin. I had just completed the SP12 Application on NW04S Usage Type PI. I had also tried uninstalling the J2EE Schema and then installing back and redeploying SP11 instead but with same results as system hung while setting up JCO RFC destination in SP12. As i restart the cluster i get the following error in 'Starting Application' state. I have done the clean shut down , ipc cleanup still the issue persists. The Application was working fine before i configured AI_RUNTIME_XI, not sure whats causing this or is this a resource/memory contention.
Also i have done the SP12 patches on other XI boxes without having to change the memory/heap parameter values.
Below is the server.0.log.
#1.5#000F202B62B500000000001700002E930004340883490E63#1183111073822#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###13
services have timed out.#
#1.5#000F202B62B500000000001900002E93000434088349100E#1183111073823#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.af.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000001B00002E9300043408834911AA#1183111073823#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.adapter.marketplace.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000001D00002E930004340883491337#1183111073823#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.af.security.service has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000001F00002E9300043408834914D0#1183111073824#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.adapter.jms.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000002100002E93000434088349165C#1183111073824#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.adapter.jdbc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000002300002E9300043408834917E8#1183111073825#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.af.ispeak.svc has timed out > hard reference to service com.sap.aii.af.ms.svc.#
#1.5#000F202B62B500000000002500002E930004340883491983#1183111073825#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.adapter.bc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000002700002E930004340883491B11#1183111073825#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.adapter.rfc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
#1.5#000F202B62B500000000002900002E930004340883491CAC#1183111073826#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.af.ms.svc has timed out > hard reference to service com.sap.aii.af.svc.#
#1.5#000F202B62B500000000002B00002E930004340883491E36#1183111073826#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.af.cpa.svc has timed out > service com.sap.aii.af.cpa.svc start method invoked.#
#1.5#000F202B62B500000000002D00002E930004340883491FEC#1183111073827#/System/Server##com.sap.engine.core.service630.container.M
emoryContainer#######Thread[Thread-1,5,main]##0#0#Error#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Ser
vice com.sap.aii.adapter.mail.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc.#
Vinith,
Issue got resolved through fine tuning Memory /Heap parameters and increasing no of dbpool connections. Though your note was a goot pointer and i am rewarding points for that.
Thanks
Rahul
Similar Messages
-
Startup issue - Process 'Starting Framework'
Hi
I seem to have a startup issue with NM2004s. I get a Half Green/ Half Yellow icon in the MMC. The 01 instance is always yellow and never progresses onto green. I have a process status of 'starting framework'.
Anyone else had this issue?
Cheers
IanHi Ian,
I just installed the J2E on a laptop that already has a NSP instance.I am facing the same issue on the J2E.Do you remember if you could resolve this and how?
Any hints would help.
Thank you -
How to determine 640/J2EE Startup Framework Binary Patch Level?
Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
GregHi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release 700
kernel make variant 700_REL
compiled on NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode UNICODE
compile time Jan 23 2008 20:42:28
update level 0
patch number 128 <<< Here is the patch number>>
source id 0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
Support Packages and Patches ->
Entry by Application Group "
SAP NetWeaver and complementary products"
SAP NETWEAVER" SAP NETWEAVER 7.0"
Entry by Component"
Application Server Java
===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder -
Webdynpro application automatic start after j2ee startup
Hi ,
Is there a way to automatically start any specific webdynpro applications after j2ee startup
OrenI guess you can write batch file for that.
Example
suppose you have a bat file which starts J2EE engine, startJ2EE.
You can write a new bat file with following commands.
startJ2EE.bat
explorer http://<server>:<port>/webdynpro/<URL as application>
Let me know if you need more help
Ashutosh -
My new MacBook Pro 17" has been having startup issues recently. After I shut down, leave, and come back, the startup issue occurs.
After pressing the power button, fans will go on, proccessing noises occur, HOWEVER, it just boots to a white/grey screen W/OUT the apple logo or round loading bar. The keyboard does not initialize either.
The only thing that I have found to 'fix' it, is just to leave it powered off for an extended period of time. It will then boot up.
I have tried many non-software related 'cures', and my compuer is completely up to date on all OsX software.
Any ideas guys??you can try to boot to safe mode ( restart holding Shift )
- you can attempt to boot to install disc and disk utility
- you can boot to AHT ( apple hardware test ) to see what component is failing ( insert disc, restart holding D )
- chances are, this is a hardware issue though. you will probably need repairs. -
Managed server startup issue!!!
hi all,
i am facing managedserver startup issue
i am start the managed server it will up take the 6 min
how to reduce the time
1)i am trying differnt ways 1)threaddump 2)GCparamets
but no usee
can u see the log and give me suugestions
below log one perticuler area it will load the application 4 min
please see the time stamps 8:31:01 to 8:35:09
please give me suggistions!!
======================================
####<Apr 11, 2010 8:31:00 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043060997> <BEA-149059> <Module eci.jar of application Agile is transitioning from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <EJB> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-010009> <EJB Deployed EJB with JNDI name com.eigner.eci.EciSession.>
####<Apr 11, 2010 8:31:01 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-000000> <Listener: end ModuleCtx[appId=Agile, modId=eci.jar, type=ejb, Target=Cluster/AgileCluster] STATE_PREPARED>STATE_ADMIN>
####<Apr 11, 2010 8:31:01 PM PDT> <Info> <Deployer> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043061016> <BEA-149060> <Module eci.jar of application Agile successfully transitioned from STATE_PREPARED to STATE_ADMIN on server agwlcrptrn1.>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309172> <BEA-000000> <Relaying updated state for app, Agile to STATE_ADMIN>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1271043309173> <BEA-000000> < +++ Returning app's state : STATE_ACTIVE>
####<Apr 11, 2010 8:35:09 PM PDT> <Debug> <Deployment> <agwlcrptrn1> <agwlcrptrn1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <hi sandeep,
i take the thread dump 10 times at the start the server can u look into this one...
===============================
CLASSPATH=/local/mnt/agile/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/local/mnt/agile/bea/jrockit_160_05/lib/tools.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/weblogic.jar:/local/mnt/agile/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/local/mnt/agile/bea/wlserver_10.3/server/lib/webservices.jar:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/local/mnt/agile/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/local/mnt/agile/agile93/agileDomain/lib/jms.jar:/local/mnt/agile/agile93/agileDomain/lib/jndi.jar:/local/mnt/agile/agile93/agileDomain/lib/tibjms.jar
PATH=/local/mnt/agile/bea/wlserver_10.3/server/bin:/local/mnt/agile/bea/modules/org.apache.ant_1.6.5/bin:/local/mnt/agile/bea/jrockit_160_05/jre/bin:/local/mnt/agile/bea/jrockit_160_05/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin
Your environment has been set.
QCHTTPHeaderIdentityAsserter.initialize
AgileAuthenticationProviderImpl.initialize
2010-04-10 20:03:14
Full thread dump Java HotSpot(TM) Server VM (10.0-b19 mixed mode):
"Thread-13" daemon prio=10 tid=0x62a8a800 nid=0x1b6 waiting on condition [0x5f7b8000..0x5f7b9130]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0xf2d78078> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"LDAPCache-TTLTimer" daemon prio=10 tid=0x09277000 nid=0x1b5 in Object.wait() [0x5f90b000..0x5f90bfb0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d7c068> (a netscape.ldap.TTLTimer)
at netscape.ldap.TTLTimer.run(LDAPCache.java:828)
- locked <0xf2d7c068> (a netscape.ldap.TTLTimer)
at java.lang.Thread.run(Thread.java:619)
"LDAPConnThread-1 ldaps://qpip.qualcomm.com:389" daemon prio=10 tid=0x5f6fc000 nid=0x1b4 runnable [0x5f95c000..0x5f95d030]
java.lang.Thread.State: RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
- locked <0xf2d820a8> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
at java.lang.Thread.run(Thread.java:619)
"Thread-12" daemon prio=10 tid=0x61c2ac00 nid=0x1b3 waiting on condition [0x5f9ad000..0x5f9adeb0]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.jdbc.pool.OracleConnectionCacheTimeOutThread.run(OracleConnectionCacheTimeOutThread.java:80)
"LDAPConnThread-0 ldap://10.47.24.141:9001" daemon prio=10 tid=0x61cb5400 nid=0x1b1 runnable [0x5fb55000..0x5fb55db0]
java.lang.Thread.State: RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
- locked <0xf2d920a8> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
at java.lang.Thread.run(Thread.java:619)
"DoSManager" daemon prio=10 tid=0x0932a000 nid=0x1b0 waiting on condition [0x5f9fe000..0x5f9fee30]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at com.octetstring.vde.DoSManager.run(DoSManager.java:433)
"VDE Transaction Processor Thread" daemon prio=10 tid=0x61c07000 nid=0x1ae in Object.wait() [0x5fba6000..0x5fba7130]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at java.lang.Object.wait(Object.java:485)
at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:367)
- locked <0xf2d70090> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:212)
"ExecuteThread: '16' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a67400 nid=0x1ad waiting for monitor entry [0x5fbf7000..0x5fbf7fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '15' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a66000 nid=0x1ac waiting for monitor entry [0x5fc48000..0x5fc49030]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '14' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a65000 nid=0x1ab waiting for monitor entry [0x5fc99000..0x5fc99eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '13' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a63c00 nid=0x1aa waiting for monitor entry [0x5fcea000..0x5fceaf30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '12' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a62c00 nid=0x1a9 runnable [0x5fd3b000..0x5fd3bdb0]
java.lang.Thread.State: RUNNABLE
at weblogic.socket.PosixSocketMuxer.poll(Native Method)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:102)
- locked <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '11' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a61c00 nid=0x1a8 waiting for monitor entry [0x5fd8c000..0x5fd8ce30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '10' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a60800 nid=0x1a7 waiting for monitor entry [0x5fddd000..0x5fdde0b0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '9' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x62a6f400 nid=0x1a6 waiting for monitor entry [0x5fe2e000..0x5fe2f130]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928d400 nid=0x1a5 waiting for monitor entry [0x5fe7f000..0x5fe7ffb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '7' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928c000 nid=0x1a4 waiting for monitor entry [0x5fed0000..0x5fed1030]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '6' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928b000 nid=0x1a3 waiting for monitor entry [0x5ff21000..0x5ff21eb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '5' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0930c400 nid=0x1a2 waiting for monitor entry [0x5ff72000..0x5ff72f30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0928dc00 nid=0x1a1 waiting for monitor entry [0x5ffc3000..0x5ffc3db0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x09288c00 nid=0x1a0 waiting for monitor entry [0x60014000..0x60014e30]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4800 nid=0x19f waiting for monitor entry [0x60065000..0x600660b0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x092d4400 nid=0x19e waiting for monitor entry [0x600b6000..0x600b7130]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=10 tid=0x0932d800 nid=0x19d waiting for monitor entry [0x60107000..0x60107fb0]
java.lang.Thread.State: BLOCKED (on object monitor)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:95)
- waiting to lock <0xf2d8c098> (a weblogic.socket.PosixSocketMuxer$1)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x0932c400 nid=0x19c in Object.wait() [0x60158000..0x60159030]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa030> (a weblogic.work.ExecuteThread)
at java.lang.Object.wait(Object.java:485)
at weblogic.work.ExecuteThread.waitForRequest(ExecuteThread.java:157)
- locked <0xf2daa030> (a weblogic.work.ExecuteThread)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
"Thread-7" daemon prio=10 tid=0x0932e400 nid=0x19b waiting on condition [0x601a9000..0x601a9eb0]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0xf2daa150> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at weblogic.utils.concurrent.JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:615)
at weblogic.store.internal.PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
"weblogic.timers.TimerThread" daemon prio=10 tid=0x60467800 nid=0x19a in Object.wait() [0x603fe000..0x603fef30]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:267)
- locked <0xf2daa2c0> (a weblogic.timers.internal.TimerThread)
"weblogic.time.TimeEventGenerator" daemon prio=10 tid=0x60431800 nid=0x199 in Object.wait() [0x60555000..0x60555db0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:286)
- locked <0xf2daa380> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:117)
at java.lang.Thread.run(Thread.java:619)
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=10 tid=0x6042e000 nid=0x198 runnable [0x605a5000..0x605a6e30]
java.lang.Thread.State: RUNNABLE
at java.util.HashMap.<init>(HashMap.java:209)
at java.util.jar.Manifest.<init>(Manifest.java:37)
at java.util.jar.JarFile.getManifestFromReference(JarFile.java:160)
at java.util.jar.JarFile.getManifest(JarFile.java:146)
at weblogic.utils.classloaders.GenericClassLoader$JarSource.getManifest(GenericClassLoader.java:528)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:310)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:335)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:288)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
- locked <0xe5c43a98> (a weblogic.utils.classloaders.GenericClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
at weblogic.ejb.container.deployer.EJBModule.setupEJBToImplClassDependencies(EJBModule.java:1790)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:397)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
"Timer-1" daemon prio=10 tid=0x609e3800 nid=0x197 in Object.wait() [0x605f7000..0x605f80b0]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d7a2c0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0xf2d7a2c0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Timer-0" daemon prio=10 tid=0x609e0000 nid=0x196 in Object.wait() [0x62350000..0x62351130]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d7a3b0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0xf2d7a3b0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"RMI TCP Accept-9896" daemon prio=10 tid=0x61ebf800 nid=0x194 runnable [0x623ba000..0x623bb030]
java.lang.Thread.State: RUNNABLE
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
- locked <0xf2d76210> (a java.net.SocksSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
at java.lang.Thread.run(Thread.java:619)
"RMI TCP Accept-0" daemon prio=10 tid=0x61eb6c00 nid=0x193 runnable [0x6240b000..0x6240beb0]
java.lang.Thread.State: RUNNABLE
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
- locked <0xf2da0170> (a java.net.SocksSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.executeAcceptLoop(TCPTransport.java:369)
at sun.rmi.transport.tcp.TCPTransport$AcceptLoop.run(TCPTransport.java:341)
at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=10 tid=0x63b01400 nid=0x192 runnable [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread1" daemon prio=10 tid=0x63901c00 nid=0x191 runnable [0x00000000..0x634f3278]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x63900800 nid=0x190 runnable [0x00000000..0x635742f8]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x0919e000 nid=0x18f waiting on condition [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x09183000 nid=0x18e in Object.wait() [0x63aad000..0x63aae130]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0xf2d8e2d0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x09181c00 nid=0x18d in Object.wait() [0x63afe000..0x63afefb0]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:485)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0xf2daa4c8> (a java.lang.ref.Reference$Lock)
"main" prio=10 tid=0x0900f000 nid=0x17b in Object.wait() [0xf7f1d000..0xf7f1e208]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
at weblogic.t3.srvr.SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
- locked <0xf2d723c8> (a weblogic.t3.srvr.SubsystemRequest)
at weblogic.t3.srvr.SubsystemRequest.action(SubsystemRequest.java:81)
at weblogic.t3.srvr.SubsystemRequest.start(SubsystemRequest.java:51)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:457)
at weblogic.t3.srvr.ServerServicesManager.startInAdminState(ServerServicesManager.java:237)
- locked <0x6536b220> (a java.lang.Class for weblogic.t3.srvr.ServerServicesManager)
at weblogic.t3.srvr.T3Srvr.initializeAdmin(T3Srvr.java:738)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:499)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
"VM Thread" prio=10 tid=0x0917e800 nid=0x18c runnable
"GC task thread#0 (ParallelGC)" prio=10 tid=0x09015c00 nid=0x17c runnable
"GC task thread#1 (ParallelGC)" prio=10 tid=0x09016c00 nid=0x17d runnable
"GC task thread#2 (ParallelGC)" prio=10 tid=0x09018000 nid=0x17e runnable
"GC task thread#3 (ParallelGC)" prio=10 tid=0x09019000 nid=0x17f runnable
"GC task thread#4 (ParallelGC)" prio=10 tid=0x0901a000 nid=0x180 runnable
"GC task thread#5 (ParallelGC)" prio=10 tid=0x0901b000 nid=0x181 runnable
"GC task thread#6 (ParallelGC)" prio=10 tid=0x0901c400 nid=0x182 runnable
"GC task thread#7 (ParallelGC)" prio=10 tid=0x0901d400 nid=0x183 runnable
"GC task thread#8 (ParallelGC)" prio=10 tid=0x0901e400 nid=0x184 runnable
"GC task thread#9 (ParallelGC)" prio=10 tid=0x0901f400 nid=0x185 runnable
"GC task thread#10 (ParallelGC)" prio=10 tid=0x09020800 nid=0x186 runnable
"GC task thread#11 (ParallelGC)" prio=10 tid=0x09021800 nid=0x187 runnable
"GC task thread#12 (ParallelGC)" prio=10 tid=0x09022800 nid=0x188 runnable
"GC task thread#13 (ParallelGC)" prio=10 tid=0x09023800 nid=0x189 runnable
"GC task thread#14 (ParallelGC)" prio=10 tid=0x09024c00 nid=0x18a runnable
"GC task thread#15 (ParallelGC)" prio=10 tid=0x09025c00 nid=0x18b runnable
"VM Periodic Task Thread" prio=10 tid=0x61ec2000 nid=0x195 waiting on condition
JNI global references: 957
Heap
PSYoungGen total 229376K, used 39147K [0xe4d70000, 0xf4d70000, 0xf4d70000)
eden space 196608K, 8% used [0xe4d70000,0xe5cf3870,0xf0d70000)
from space 32768K, 70% used [0xf2d70000,0xf4427708,0xf4d70000)
to space 32768K, 0% used [0xf0d70000,0xf0d70000,0xf2d70000)
PSOldGen total 1835008K, used 0K [0x74d70000, 0xe4d70000, 0xe4d70000)
object space 1835008K, 0% used [0x74d70000,0x74d70000,0xe4d70000)
PSPermGen total 62208K, used 62093K [0x64d70000, 0x68a30000, 0x74d70000)
object space 62208K, 99% used [0x64d70000,0x68a134a8,0x68a30000) -
Startup issue when having more than one database on machine
Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AMaymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM -
J2EE startup framework and J2EE
I have changed some Java VM parameters.
To make above change effective, I have to re-start the J2EE instance.
But my co-worker (who left my company) wrote in his document
" For the SAP J2EE startup framework, it's NOT sufficient to re-satrt the J2EE
instance" to activate above change.
I did some research on J2EE startup framework. I think it is no longer used in NW7.0
Could you help me
-- how do I know a system has SAP J2EE startup framework (I believe it is a concept prior to 7.0 version).
Our system is NW7.0.
-- If it is a J2EE stratup framework, how do I activate above change?
Thanks a million!Hello Christy
SAP Netweaver 7.0 still has J2EE Startup and Control framework.
When you change a property normally the tool prompts that a restart is required. Normally you get a description of what kind of restart is needed. "A cluster restart is needed" for example meaning you have to stop/start your J2EE cluster.
If you are working on a dual stack you can stop/start through transaction SMICM under menu item Administration --> J2EE Cluster --> Send Hard Shutdown --> With Restart. That will hard restart your J2EE cluster and your parameter change (done in configtool I assume) will be activated once the J2EE cluster has restarted.
If you are working on a single stack SAP system you can stop/start using command prompt stopsap JC<instance number> or through the SAP Management Console.
You can check the activate VM parameters through the http://<hostname>:<j2ee port>:/index.html page under system information --> VM parameters for the node for which you have made a change.
Kind regards
Tom -
I have a problem with system startup. My MacBook is pretty much brand new and the system is not cluttered or anything. And still the startup-process freezes even before the apple logo appears, so I just get the grey screen and that's it. I have read about other startup issues, but in those cases the computer at least booted until the apple logo was shown, so my case is slightly different.
After unplugging my external USB hard drive startup works. It also works when I plug it into the other USB-slot. Other devices plugged into the problematic slot (keyboard, USB-stick) work and do not cause problems during startup.
Any experiences with this problem? Would you say the USB-slot is broken in any way? Is it something that can be fixed?
Ordinarily, I would just use the other slot and be done with it. Since the computer is brand new, however, I'd prefer to be on the safe side.
Thanks in advance,
TimoHi
+"Would you say the USB-slot is broken in any way?"+
Possibly? Running an Apple Hardware Test might say?
+"Is it something that can be fixed?"+
Yes. It should be covered under the standard 1 year warranty regardless. Provided the fault is not down to wilful or accidental damage it will be covered under the warranty.
You could connect the external USB hard drive in the affected slot an restart the mac in verbose mode (command+v) at restart. This should display error messages - if any - at the point where the start-up stalls. Possibly giving a clue as to what it's having a problem with? You may see an I/OKit error problem or something similar?
Tony -
Have any ideas re: G5 startup issues? Long post...
My dual processor G5 (purchased Jan. 2005) is in the shop, and, of course, out of warranty. It's been down for over two weeks. Here is the story of its demise:
Installed 10.4.9 upgrade. Began having "launch systems" and crashdump/usb crash errors thereafter. Not a lot of info online regarding these problems, so I decided to do an archive and re-install of my system software.
Started having intermittent problems restarting the G5. Either it would chime, but not kick on the monitor, chime and kick on the monitor but hang at the grey apple startup screen, or not chime at all, with which only the fans would come on. Apple Extended Hardware Test came back OK. Still had problems after removing my USB devices.
Problems continued after the reinstall of the system software, eventually to the point where I could not even boot from a CD. When the G5 did operate, after a short period of use it would freeze, and I would have to force a restart and pray it would boot up completely. It would reliably freeze after waking it from sleep, but also froze in iPhoto and Finder as well.
I have tried resetting the PMU and the PRAM with no improvement. Took it to an Apple Authorized Service Center, luckily only a couple miles from where I work. They tried booting with the Apple RAM only, then the third party RAM only, no improvement. Hard drive was completely reformatted and system reinstalled, no improvement. I am waiting to hear what else they've tried.
My G5's serial # falls outside of those involved with the power supply issues. Yet, could this be a possibility? Any other ideas as to what the problem could be, or has anyone had similar issues?
I freelance as a graphic designer and this has me in a panic. Now using the hubby's Intel iMac to run CS2 and it's a drag.
Thanks in advance.Hi and thanks for the input. I just spoke to the Apple service guy and he still insists there is not a hardware issue. Apparently there is an Apple technical doc, available only to authorized techs, that refers to this particular issue, and the fix is a download and install (firmware, perhaps?) He has to contact Apple and confirm my G5 is within the serial # range for this particular fix.
That's my best interpretation of our discussion. He was rather cryptic. But he says it's not the power supply.
I did an archive and install because, like an idiot, I did not have anything backed up at that point. After that failed, I used up my stash of DVDs and copied gigs to our iMac until the G5 gave out. I had run the hardware test several times and each time came back clean.
Permissions were repaired before and after updates; had it freeze a couple times mid-update. Tried booting in safe mode and single-user mode and still had the same startup issues.
To add insult to injury, I purchased a LaCie Porsche external drive as an eventual backup drive whenever the G5 returns. Hooked it up to our iMac to backup the items I saved off the G5. It failed after the second use. Returned for replacement.
Thanks.
G5 Dual 2.5 MHz Mac OS X (10.4.8) -
Hey guys.
I'm having a distressful startup issue with my Macbook (13-inch, black). It's happened to me before, but that was a few months ago and everything was fine. Now it's happening again and I'm getting worried that the workaround I've found won't work anymore.
The first time it happened, I wanted to restart my computer because I had installed a bunch of things and it was running a little slow. After I restarted, I heard the "GONG", the apple appeared, and the spinning gear also appeared. It seemed to be working, but after a few minutes, the apple changed to a "do not enter" sign.
I tried resetting the P-RAM to no avail, and finally ended up starting up in Safe Mode (by holding the Shift Key) which at least allowed me to start up my computer. From there, I was able to reset and my computer started up normally after that just fine.
Now, last night, the same thing started happening. There were a few different things that happened this time. For one, I got a big gray box on my screen that told me I needed to reset my computer in a few different languages. Secondly, (the only thing I can attribute the cause to) was that I had opened iChat for the first time in 5 months or so. Shortly after is when I got the box.
So I reset and started having the same problem. I've reset in safe mode now, and am currently installing an update to OSX 10.6.3.
The only programs running at the time of the incident were:
-Google Chrome
-Text Edit
-iCal
-iTunes
Any help you guys have for me would be GREATLY appreciated! I took it to an Apple store the first time it happened and they didn't know what was wrong with it. :/Well, after booting in Safe Mode and installing the update, it started up just fine. I am afraid that this is going to happen again, though. Any help you guys have would be GREATLY appreciated.
Thanks. -
Lenovo 3000 N200 - Startup issue from bad to worse
I was facing similar startup issues like others (abrupt shutdown). I saw posts with similar issue so I tried the method (F1 on startup then F9 and F10) but ended up making things worse. Now it won't boot at all. Goes to "Windows didn't start successfully" and I have tried every single option (safe mode, last known good config and normal start) but nothing works.
Any suggestion?remove the hdd and use linux live cd to check if it boots.
-
Intermittent Startup Issues, Fan Reving
Has anyone else had startup issues with the G5's? I have had to re-seat memory in my lab on 3 machines and this seems, so far, to have alleviated the problem.
The funny thing is I have had these machines for about 8 months and never had this problem. My computers are locked and access to the physical memory is impossible.
Just curious?
Once I tried to run in Open Firmware the computer beeped 3 times, thus telling me it was a memory issue. Each of the machines exhibited different symptoms??? One was caught in the blue screen. One in the gray screen with neverending fan reving and spinning startup wheel. Lastly, a frozen computer (in an account) where all keyboard and mouse commands are not recognized. Upon hard shutdown and restart either this machine ended up stuck in gray screen **** or started ok.Yeah, if you are in a humid lab (i.e. animal research lab) or some other unique environment sometimes the conditions can be less than ideal.
Most electromechanical connections, such as the slots where the RAM plug in or PCI card slots or cable connections, are more apt to become less than optimal in such a condition.
Another problem tends to be that the G5 is a hunk of cold metal when powered down or even sleeping and in a cold room. Humidity loves to condense on cold metal and has been known to cause problems.
However, since all you have had to do thus far is re-seat the RAM, the impact seems to be minimal at this time.
Luck-
-DaddyPaycheck -
I installed SAP Netweaver 7.0 EHP1 developer workplace with maxdb. everything seems fine until now. When I try to start the engine,
jcontrol -- sync binaries seems fine
jcontrol-- connect to message server -- fails
Here is the log dev_jcontrol.
[Thr 2368] Mon Mar 01 13:16:39 2010
[Thr 2368] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 2368] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1696
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 2368] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 2368] *** ERROR => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> terminate [jcntrms.c 374]
[Thr 2368] JControlCloseProgram: started (exitcode = -100)
[Thr 2368] *** ERROR => MsIModState: not_attached [msxxi.c 3838]
[Thr 2368] *** ERROR => Can't modify message server state (state = 7, rc = -3) [jcntrms.c 841]
[Thr 2368] JControlCloseProgram: good bye... (exitcode = -100)
I tried different ways as per the forums but doesn't work. One thing is my license got expired. Inorder to apply new license the J2EE should be up right. Any help appreciatedHere is the dev_jcontrol log:
[Thr 6724] Mon Mar 01 14:10:27 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:10:33 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:10:39 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:10:45 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:10:51 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:10:57 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:11:03 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:11:09 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:11:15 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:11:21 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1660
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** WARNING => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> reconnect [jcntrms.c 368]
[Thr 6724] Mon Mar 01 14:11:27 2010
[Thr 6724] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1640
(SI_ECONN_REFUSE/10061; I4; ST; 10.10.0.10:3901) [nixxi.cpp 2835]
[Thr 6724] *** ERROR => MsIAttachEx: NiBufConnect to OAKL-L3ANC3E/3901 failed (rc=NIECONN_REFUSED) [msxxi.c 652]
[Thr 6724] *** ERROR => Can't attach to message server (OAKL-L3ANC3E/3901) [rc = -100]-> terminate [jcntrms.c 374]
[Thr 6724] JControlCloseProgram: started (exitcode = -100)
[Thr 6724] *** ERROR => MsIModState: not_attached [msxxi.c 3838]
[Thr 6724] *** ERROR => Can't modify message server state (state = 7, rc = -3) [jcntrms.c 841]
[Thr 6724] JControlCloseProgram: good bye... (exitcode = -100)
std_bootstrap log:
stdout/stderr redirect
node name : bootstrap
pid : 6676
system name : A10
system nr. : 00
started at : Mon Mar 01 14:10:12 2010
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
dev_server, dev_dispatcher, std_server, std_dispatcher files are not generated as the it couldn't even connect to message server. -
FRM-92101: There was a failure in the forms servering during startup issue
Hi,
i am getting "FRM- 92101: There was a failure in the forms server during startup. thisis due to invalid configuration. Please look into the web_server log file for details " error after giving credential for my application. Application server 10G Release 2 (forms and report services) is installed in Linux server. Please Below the linux server details
"Linux VM192DOR 2.6.18-194.0.0.0.3.el5xen #1 SMP Mon Mar 29 18:27:00 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux"
please find the application.log from $ORACLE_HOME/j2ee/OC4J_BI_Forms/application-deployments/formsapp/OC4J_BI_Forms_default_island_1/application.log
12/03/27 09:40:30 formsweb: Started
12/03/27 09:41:01 formsweb: lservlet: init
12/03/27 09:41:01 formsweb: ListenerServlet init()
12/03/27 14:18:28 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
12/03/27 14:18:28 formsweb: Forms session <1> exception stack trace:
java.io.IOException: FRM-93000: Unexpected internal error.
Details : No HTTP headers received from runform
at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
12/03/28 00:27:33 formsweb: Forms session <2> aborted: unable to communicate with runtime process.
12/03/28 00:27:33 formsweb: Forms session <2> exception stack trace:
java.io.IOException: FRM-93000: Unexpected internal error.
Details : No HTTP headers received from runform
at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
I refered my forums i tried all workaround .. i could not resolve this issue. kinldy hlep me to resolve this issue.
And Pls let me know what are rps are require in applicaiton server and Database server with respect to this issue?
Below rpm are available in Linux server where application server. Please let me know any other rpm is required to resolve this issue.
$ rpm -qa openm*
openmotif21-2.1.30-14
openmotif22-2.2.3-18
openmotif21-2.1.30-11.EL5
$
Oracle database also installed in other Linux server see below details
Linux VM177DOR 2.6.18-194.0.0.0.3.el5xen #1 SMP Mon Mar 29 18:27:00 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Database details
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
my database has no OPENM* rmp available.
$ rpm -qa openm*
$
Please help to resolve this issue.
GowthamHi Gowthaman,
FRM 92101 is a generic error..It indicates that there had been a problem with the Forms Runtime engine.
Can you please tell
1)Previously were these forms running perfectly???or is this a fresh setup??
2)are you getting this error on a specific form???
3)are you getting the error due to long running form??
4)Have you been through the below metalink ID??
Master Note For Known Causes of FRM-92101 Error In Forms [ID 604633.1]
5)Do get FRM92101 after certain number of specific users logged in through your form application ??
Please enable trace and upload the trace file details on your next post..It would be helpful in trouble shooting
Regards
Fabian
Maybe you are looking for
-
Multiple Hotspots in a ALV Grid single column
Hi Experts, My ALV Grid report output looks like below.... If you observe below output, column 3 has multiple documents each one separated by ' ; '. Now, I would like to assign hotspot on each documents like DOC1, DOC2, DOC3, etc. Heading#:
-
requirement is like this we have three message text input filelds the fields are finance,MMd,User depts,using lovs we are searching for person id (coming from different tables according some conditions) and return to the input field based on the pers
-
my macbook air was installed double system ,one is mac ox 10.6.7 another is windows7. the vidoe and the sound can't play together in mac system.I have tried many vidoe play tools including mplayerx and lvc etc.however, it is normal when I play the sa
-
LabVIEW driver for Milli Advantage A
I was wondering if anyone had worked out a way to talk to a EMD Millipore Milli-Q Addvantage A10 water purifier. It has an ethernet port, but they seem reluctant to divulge any information on any communication protocols. Thanks, DaveT David T
-
Hello All, In development, smartforms report, print preview is showing correct. But when i did transport it to QAS fonts size became larger. I have checked all the font style n size. all are same in DEV and QAS. then why is coming in dev correct an