J2ee System copy issue

Hi Experts,
We are using XI 3.0 on Windows and MSSQL platform, i have made system copy sucessfully from production system with process of DB restore for ABAP and Java Import, the new server is up and running both abap and java.
Problem : In the newserver when i execute the tcode sxmb_ifr it takes me to production server url and not the new server hostname url.
when i tried the http://newserver hostname.com:50000 it works fine. but from this url except home page every other link like exchaneprofile, SLD,IR and ID links still points to the production server host name.
Please look at the following post installation activities i have performed till now in new serverand please guide where else i have to change the host name in the new server.
Note: i did not cange the logical system assignment in scc4, beacuse i was not sure about the other problems we may face after directly assigning new logical system to the productive client in new server.
1. Run installation check: Administration u2192 System administration u2192 Administration u2192
Installation Check (transaction SM28).
2. Configure the Workbench Organizer (SE06) with the option Database Copy. This
releases all transport, repair, and customizing requests that have not been released in
the source system.
3. Configure STMS
4. In transaction RZ70, change the value for the host and the gateway service in the group box
Transport Information
5. Change the pipeline to the Integration Server by running transaction SXMB_ADM -> Configuration -> Integration Engine Configuration
6. Open Visual Administrator -> Change the new host name in the following
services -> Jcorfcprovider all the services
services -> SLD Suppiler
7. Host name Change in SLDAPICUST
Note: In the SAP system copy guide it says me to chane few parameters in exchange profile but when i go through the url http://newserver hostname.com:50000/exchangeProfile it takes me to production server, is there any option to change the exchange profile parameters ?
Please help me.
Thanks
Sonali

Hi!
No, I haven't figured it out.
But since we are not going to use the groupware integration for some time, I might just skip it and install it during or after the upgrade.
rollo

Similar Messages

XI 3.0 post system copy issue

Hi Experts,
We are using XI 3.0 on Windows and MSSQL platform, i have made system copy sucessfully from production system with process of DB restore for ABAP and Java Import, the new server is up and running both abap and java.
Problem : In the newserver when i execute the tcode sxmb_ifr it takes me to production server url and not the new server hostname url.
when i tried the http://newserver hostname.com:50000 it works fine. but from this url except home page every other link like exchaneprofile, SLD,IR and ID links still points to the production server host name.
Please look at the following post installation activities i have performed till now in new serverand please guide where else i have to change the host name in the new server.
Note: i did not cange the logical system assignment in scc4, beacuse i was not sure about the other problems we may face after directly assigning new logical system to the productive client in new server.
1. Run installation check: Administration u2192 System administration u2192 Administration u2192
Installation Check (transaction SM28).
2. Configure the Workbench Organizer (SE06) with the option Database Copy. This
releases all transport, repair, and customizing requests that have not been released in
the source system.
3. Configure STMS
4. In transaction RZ70, change the value for the host and the gateway service in the group box
Transport Information
5. Change the pipeline to the Integration Server by running transaction SXMB_ADM -> Configuration -> Integration Engine Configuration
6. Open Visual Administrator -> Change the new host name in the following
 services -> Jcorfcprovider all the services
 services -> SLD Suppiler
7. Host name Change in SLDAPICUST
Note: In the SAP system copy guide it says me to chane few parameters in exchange profile but when i go through the url http://newserver hostname.com:50000/exchangeProfile it takes me to production server, is there any option to change the exchange profile parameters ?
Please help me.
Thanks
Sonali
Subject modified
Read the "Rules of Engagement"
Edited by: Juan Reyes on Oct 31, 2008 9:48 AM

Hi,
the explanation of some of the thing you have written is clearly that the AII-Properties of the XI system have still not been switched.
The properties must be changed once - afterwards the URL to the exchange profile and all other URLs should become valid.
The key is therefore to change the exchange profile. Try please the to access the exchange profile by using the ip address or the fully
qualified name of the new server http://<newserver>:<port>exchangeProfile/connection.jsp
Did I get it right - you are redirected to the URL http://<oldserver>:<port>exchangeProfile/connection.jsp ?
Regards
Frank

System Copy Issue

I've done an homogeneous system copy using a redirected restore of our PROD system to a Sandbox system.
In the Sandbox system, I now see the following in the system log :
08:11:42 BTC 003 000 DDIC                  BY 2 Database error -727 at OPC
08:11:42 BTC 003 000 DDIC                  BY 0 > SQL0727N An error occurred during implicit system action
08:11:42 BTC 003 000 DDIC                  BY 0 > type "3". Information returned for the error includes SQLCOD
08:11:42 BTC 003 000 DDIC                  BY 0 > "-204", SQLSTATE "42704" and message tokens
08:11:42 BTC 003 000 DDIC                  BY 0 > "SYSTOOLS.ADMINTASKS". SQLSTATE=56098
08:11:42 BTC 003 000 DDIC                  BY 1 Database error -727
I also see similar messages in the db2diag.log file.
Any ideas why ?
Thanks,
Robert

Hello,
here is explanation of error:
http://publib.boulder.ibm.com/infocenter/db2luw/v9r7/topic/com.ibm.db2.luw.messages.sql.doc/doc/msql00727n.html
The action attempted is shown by the action-type:
3 = implicit revalidation of an object
now let's check SQLCODE:
http://publib.boulder.ibm.com/infocenter/db2luw/v9r7/topic/com.ibm.db2.luw.messages.sql.doc/doc/msql00204n.html
name is an undefined name.
Read both notes and continue according to instructions.
Tomas

Netweaver Java Enterprise Portal System Copy issue

Dear friends,
We are trying to export Production portal online without down time and install Target system using import method.
Import process is successfull and we tried doing element.resync=true for force bootstrap from the database. We are able to see SAP standard applicaitons but all custom applications are missing. I mean all application under sap.com are available and all applicaitons under <ourcomapny>.org is not see. We checked the export dump we see all .SDA files for each application in the export dump.
If anyone know the reason why it didn't deploy. Please let me know. We are using Production and Sandbox: NW 2004s EHP1 SP4.
Thank You.
Regards,
Prasad

Please check the note below, which you need to do at the end of import.
Link: [Note 888718 - NW 2004s: Copy Usage EP]

Odd System Copy

Hello Experts,
I am performing a homogeneous system copy on linux w/ MaxDB. The source system is really more like source systems. Using one database instance (XDB), I have an ERP 6.0 EHP4 system (XS1) and an EP instance (JS1). My first step was to export the database using the Database Manager; then I made the export available to the target system. The system copy for the abap application server went without a problem. Now I am having trouble with the J2EE system copy.
My assumption was that the single MaxDB export contained both the ABAP schema (SAPXS1) and the J2EE schema (SAPJS1DB). Also, I assumed since XS1 and JS1 are two separate instances sharing a single database instance, then I would also need to complete two system copies. Were any of those two assumptions false?
My hope was to skip the recovery w/ initialization step during the J2EE system copy since the DB containing the J2EE backup should already be loaded in the target database host. The error I'm encountering on the J2EE system copy is "You can not use existing instance while installing with backup/recovery method." Sadly, that error message is very straight forward and doesn't leave much hope to complete both system copies using this method.
A system copy for both ABAP and J2EE stacks ins't the correct path, is it?
Any help is appreciated.
Kind Regards,
Zach Shay

Markus,
Update #1:
It appears that sapinst will allow me to do a system copy of the J2EE stack via the first method.
Standard System Copy / Migration (load-based)
What is a bit queer on the whole situation is the wording that sapinst is presenting me. sapinst asks me for a "Migration Export." I supply the directory with the label, "JAVA." Then sapinst asks me if I would like to use the existing database or create a new one. It allows me to select use existing database (which is a step past what is allowed via Homogenous System Copy)! However, sapinst then asks me for another Migration Export.... Unfortunately this Migration Export has the label "SAP:MIGJDMP:701:::*", and is a label not present in any of my export directories (or subdirectories).
The labels I have from the ABAP and Java exports are:
SAP:JMIG:701:*:*:*
SAP:MIGSDM:701:MIGRATION:*:*
SAP:MIGAPPS:701:MIGRATION:*:*
SAP:MIG:*:EXPORT(1/:*:*
Is this MIGJDMP Migration Export related to a database export via R3Load or something similar? If so, how do I get this?
\[reading more documentation...\]
Thank you,
Zach

About sap bw system Copy or backup ?(URGENT)

Hi gurus:
     Hi friends,I saw many theads about this subject,and I found many documents,But STILL I can't find the way to solve my problem.
     It is: How to export the objects I created in develop system to a harddisk, then import it to the QA system . Dev to QA with harddisk NOT online?
     And can I backup the whole bw system in the harddisk,and restore the bw system in the qa system istead ? how to backup the bw system ?
All useful reply will assign points
thx
chan

Hi Zegion,
I think the following may help you:
Purpose: Preserves logical system dependent objects for restoration in case of a system copy issue when a logical source system is deleted or deactivated. BW will auto re-generate a lot, but not these objects.
1.     Create on a development system like BWD, because the system is set as a development system in SCC4 and can create and export transports, and will include all objects. A dummy can be used for comparison if the system to be copied is production or test.
a.     If creating on another system, like BW test (BWT) or production, you must first open the system in
   i.     SE06 System Change option modifiable /BIC and /BI0
   ii.     SCC4 client settings set like in BW Development system (BWD)
   iii.     STMS in client 000 from BWD (domain controller)
            1.     Remove BWT from transport path
            2.     Setup new 2-system path BWT-BW? (BWS or virtual system). This creates a ZOUO transport layer, allowing creation of non-local/not $TMP package transports (see complex sample below)
2.     Go to RSA1-Admin workbench, Transport Connection
    a.     Select Object Types
    b.     Set for Grouping-Save for system copy
    c.     Set for Start manual collection
    d.     Set for Display List
3.     Drag and drop source system (select from select objects list and transfer selection) to collection window, example SCEM, SC0CLNT575, DEVCLNT100, SAP_DEMO. I recommend only doing one source system at a time for maximum flexibilityand because the R3 sources are very large.
    a.     Then execute collection Gather dependent objects
    b.     Select each category (mainly Transfer Rules, Transfer structure and InfoPackageswhatever is selected. On each header, right click and select transfer all below
    c.     Validate that there are no objects in the $TMP development package (DevClass). If it is, select the object and change package button to set to ZAWB. (Anything but $TMP (local))
    d.     NOTE- To reset transport connection, select anything on the left frame of the screen to refresh
4.     You are now ready to transportselect the truck icon to create
    a.     Call it Save for System Copy and the source system name
    b.     Go to SE09/SE10 and release it and tasks to the OS level
5.     Cleanup reset STMS and distribute, reset SCC4 and SE06 on BW0/Source BW system
6.     Verify RSA1- Tools mapping of source system names on target BW system (i.e. BWU) for source system of transport (i.e. SC0CLNT575).
7.     Verify RSA1- Modeling-Source system connection checks OK on target system
8.     Manually import transport in STMS Import Queue, extras, other requests, Add (to buffer). Import single with right click or partially loaded truck icon, select options as below:
9.     LAST STEP Validate import logs and activated objects. If there is an error, ensure the link to the new system is active, the RSA1-Tools-Mapping of source system names converts properly from say DEVCLNT100 to TSTCLNT200 (correct frame of reference) and reimport.
if it helpful reward point are appreciated

System copy of a ABAP+J2EE WAS 6.40 system - issue w. J2EE instance/Mapbox

Hi guys and girs!
I'm doing a system copy of a CRM 4 system based on Web AS 6.40 and with a dual stack system.
The J2EE instance is only used for Mapbox and nothing else.
I've done a system export of the J2EE instance on the source system, but when I import it, it gives me the following message "No SAP data found in database CRD"
Is this because Mapbox does not use the database or have I done something wrong?
I run sapinst.exe and choose SAP CRM 4 - System Copy - Target System - Java system - MS SQL Server - Migration-Target System Installation to import the exported data.
Maybe there is no data?!?! and I sould only install a Java central instance and then deploy the mapbox package with SDM?!
regards
rollo
Edited by: rollo on Dec 10, 2008 3:14 PM

Hi!
No, I haven't figured it out.
But since we are not going to use the groupware integration for some time, I might just skip it and install it during or after the upgrade.
rollo

J2EE Cluster is not created during system copy.

Hi all,
Iu2019ve been trying to perform a system copy on our PI 7.0 sp14 test system & create a second system on the same server.
I used the standard Sapinst tools for this because it is a PI ABAP+JAVA system.
The copy process went smooth but after it finished I realized that the ABAP side has been installed correctly but when I tried running "SXMB_IFR" I saw that the system points me to the source system J2EE process.
Looking into the file system of the target system, I saw that under the path \usr\sap\<SID>\<Instance>\j2ee\cluster only the bootstrap folder exists. Of course that in the SAP MMC, you cannot see any J2EE process under the new system process list.
I tried using a newer sapinst but that didnu2019t help.
Anyone ever encounter anything like that?
Thanks for your help.
Regards,
Yoav Zilberman

He again,
Now i finally managed to make all the J2EE process work but i keep having issues with the "server0" process in both systems on the server.
the first system i starts works fine but the second one will get the error: [Thr 8944] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\XIQ\DVEBMGS00\exe\jvmx.jar ; (SID changes according to which system started first).
Thanks,
Yoav

SAPINST System Copy MaxDB J2EE 7.0 "Row too long" at CREATE TABLE

Hello Guru's,
w'll make a system copy of a EP J2EE JAVA standalone system with sapinst an jload.
At the phase Import JAVA Dump, the import halted with the following error...
{Apr 1, 2009 3:10:35 PM com.sap.inst.jload.Jload dbImport
INFO: trying to drop table KMC_UWL_ITEMS
Apr 1, 2009 3:10:35 PM com.sap.inst.jload.Jload dbImport
INFO: table dropped
Apr 1, 2009 3:10:35 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table KMC_UWL_ITEMS
Apr 1, 2009 3:10:36 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: com.sap.dictionary.database.dbs.JddException: CREATE TABLE KMC_UWL_ITEMS failed
15:10:35 2009-04-01 dbs-Info: <<< Analyze table KMC_UWL_ITEMS >>>
15:10:36 2009-04-01 dbs-Info: predefined action is: >>>null<<<
15:10:36 2009-04-01 sap-Info: Table KMC_UWL_ITEMS not found on DB.
15:10:36 2009-04-01 dbs-Info: Action: CREATE
15:10:36 2009-04-01 ope-Info: Create table in database SAPDB
E R R O R ******* (DbObjectSqlStatements)
15:10:36 2009-04-01 dbs-Error: Exception caught during SQL execution [-2000] (at 831): Row too long CREATE TABLE "KMC_UWL_ITEMS"("ITEM_ID" FIXED(19) DEFAULT 0 NOT NULL, "I_CONNECTOR_ID" INTEGER DEFAULT 0 NOT NULL, "SYSTEM_ID" VARCHAR(54) UNICODE NOT NULL, "EXTERNAL_ID" VARCHAR(300) UNICODE NOT NULL, "USER_ID" FIXED(19) DEFAULT 0 NOT NULL, "APP_CONTEXT" VARCHAR(255) UNICODE , "ATTACHMENT_COUNT" INTEGER , "CREATED_DATE" TIMESTAMP , "CREATOR_ID" VARCHAR(255) UNICODE , "DESCRIPTION" LONG UNICODE , "DELETED_FLAG" VARCHAR(1) UNICODE NOT NULL, "DUE_DATE" TIMESTAMP , "EXTERNAL_OBJECT_ID" VARCHAR(255) UNICODE , "EXECUTION_URL" VARCHAR(750) UNICODE , "EXPIRY_DATE" TIMESTAMP , "EXTERNAL_TYPE" VARCHAR(255) UNICODE , "FLAGS" INTEGER , "ITEM_TYPE" VARCHAR(255) UNICODE NOT NULL, "PRIORITY" INTEGER , "STATUS" VARCHAR(50) UNICODE , "SUBJECT" VARCHAR(255) UNICODE , "GROUP_ACTION" VARCHAR(1024) UNICODE DEFAULT ' ' , "PROCESSOR" VARCHAR(255) UNICODE DEFAULT ' ' )
15:10:36 2009-04-01 ope-Info: Table KMC_UWL_ITEMS could not be created in database
 at com.sap.inst.jload.db.DBTable.create(DBTable.java:109)
 at com.sap.inst.jload.Jload.dbImport(Jload.java:278)
 at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
 at com.sap.inst.jload.Jload.main(Jload.java:621)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Apr 1, 2009 3:10:36 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
We have MaxDB 7.6.00.09.
The SAP Note 852597 is only for MaxDB Databases at Build 10.
It's fixed at Build 15. SapHelp is not helpful.
how WE can solve it????
regards
chris

We have solved the issue with a newer MaxDB version. Not the best solution but works.

Hom System Copy- Error running J2ee migration tool kit

Good Day Guys,
Im performing homogenous system copy.I have encountered below error:
INFO 2008-10-20 13:05:33
Output of C:\j2sdk1.4.2_18-x64\bin\java.exe -classpath D:/usr/sap/LE1/SYS/global/sltools/sharedlib/launcher .jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport D:/usr/sap/LE1/SYS/global/sltools/jmt;D:/usr/sap/LE1 /SYS/global/sltools/sharedlib import.switch resume downtime mti.properties is written to the logfile C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS/runJmt.log.
WARNING 2008-10-20 13:05:34
Execution of the command "C:\j2sdk1.4.2_18-x64\bin\java.exe -classpath D:/usr/sap/LE1/SYS/global/sltools/sharedlib/launcher .jar;. com.sap.engine.offline.OfflineToolStart com.sap.sdt.jmt.migrationtool.MigrationToolImport D:/usr/sap/LE1/SYS/global/sltools/jmt;D:/usr/sap/LE1 /SYS/global/sltools/sharedlib import.switch resume downtime mti.properties" finished with return code 27. Output:
ERROR 2008-10-20 13:05:34
CJS-20068 Error when running the J2EE Migration Toolkit. SOLUTION: See output of logfile C:\Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS//runJmt.log: ''.
ERROR 2008-10-20 13:05:34
CJS-20068 Error when running the J2EE Migration Toolkit. SOLUTION: See output of logfile C:\Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/CENTRA L/AS//runJmt.log: ''.
ERROR 2008-10-20 13:05:34
FCO-00011 The step RunMigrationController with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_One host_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind |ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|in d| ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind|ind |ind|ind|2|0|RunMigrationController was executed with status ERROR .
INFO 2008-10-20 13:06:29
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_On ehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|in d|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|i nd|ind|ind|ind|4|0|NW_RUN_MIGRATION_CONTROLLER|ind |ind|ind|ind|2|0|RunMigrationController".
I have checked the runjmt.log its empty.
I did find a note 966752.but couldnt solve the problem.Another thing do we need to have same version of j2sdk,mine are different on source(ia64) and target(x64).
Please advice.
BasisNerd

CAn you precise also what Migration tool are you using?
Migration from 5.1 to SAP BPC 7.0 NW?
In that case when you are speaking about the installation about what part are you speaking?
I think actually you are speaking about the migration tool from 4.2 to 7.0 Microsoft version .
In that case you can install the mIgration tool just with SAP BPC sys admin users and you have to input the password for that user. Sys admin user for BPC is usually the user used for installation of SAP BPC server.
Any way I suggest to follow the Migration tool training document and there you will find all the information necessary.
Regards
Sorin Radulescu

Issue with secure store key phrase during system copy export

Hi,
We recently upgraded our all production portals to SAP NW 7.31 SP7
(Migrated them from windows to Linux).
While taking the export in production portals, we are stuck at a stage
while defining parameters.
We did not move further if we tried the all the passwords at this stage.
We ran the key phrase check tool and found the key phrase we are
supplying is correct with the below command that tells us on the
sapinst screen
'<global directory>/sltools/checkKeyPhrase(.sh) -f <global
directory>/security/data/SecStore.properties'.
so the problem is not with the key phrase
We are stuck with system copy export as our refresh is halted because
of this issue.Screenshot is attached.
sapinst.log
'/usr/sap/put/usages_data_P0P.1.xml'.
INFO 2014-03-21 12:29:01.742
Copied file '/usr/sap/put/usages_data_P0P.xml' to '/usr/sap/put/usages_data_P0P.2.xml'.
INFO 2014-03-21 12:29:04.919
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.10
Execute step getUsageTypes of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:05.757
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.777
Execute step dss_checkForPI of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:05.887
Working directory changed to /usr/sap/put.
INFO 2014-03-21 12:29:05.907
Execute step checkKeyPhrase of component |NW_Export|ind|ind|ind|ind|0|0|NW_Java_Export_Dialog|ind|ind|ind|ind|javaUnload|0|NW_JAVA_Export_PREPARE|ind|ind|ind|ind|prep|0
INFO 2014-03-21 12:29:26.291
Effective group id set to 202.
WARNING 2014-03-21 12:29:26.310
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:29:26.291 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:29:26.318
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:29:26.409
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:29:26.414
Effective group id set to 202.
WARNING 2014-03-21 12:29:26.434
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:29:26.414 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:38:17.491
Effective group id set to 202.
WARNING 2014-03-21 12:38:17.512
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:38:17.491 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:38:17.527
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:38:17.618
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:38:17.626
Effective group id set to 202.
WARNING 2014-03-21 12:38:17.647
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:38:17.626 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:43:38.969
Effective group id set to 202.
WARNING 2014-03-21 12:43:38.992
Execution of the command "/bin/csh -c "source /home/p0padm/.cshrc; env"" finished with return code 100. Output:
INFO 2014-03-21 12:43:38.969 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
INFO 2014-03-21 12:43:39.6
Creating file /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:43:39.101
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO 2014-03-21 12:43:39.113
Effective group id set to 202.
WARNING 2014-03-21 12:43:39.140
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO 2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
 CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
 lib=syslib module=syslib
Effective group id set to 202.
sapinst_dev.log
TRACE
2014-03-21 12:43:39.67 [syuxcuser.cpp:643]
PSyGroupImpl CSyUserImpl::getPrimaryGroup()const
lib=syslib module=syslib
account user="p0padm" uid="390" exists with parameter gid="301"
TRACE
2014-03-21 12:43:39.87 [syuxcuser.cpp:643]
PSyGroupImpl CSyUserImpl::getPrimaryGroup()const
lib=syslib module=syslib
account user="p0padm" uid="390" exists with parameter gid="301"
TRACE
2014-03-21 12:43:39.97 [syuxctask.cpp:270]
CChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 20950
INFO
2014-03-21 12:43:39.101
CJSlibModule::writeInfo_impl()
Output of /usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask is written to the logfile /usr/sap/put/checkKeyPhrase.log.
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
TRACE
2014-03-21 12:43:39.137 [syuxctask.cpp:880]
CUnixProcessManager::sap_waitpid(pid_t pid, int * pStatus, int options)
lib=syslib module=syslib
Child process 20950 returned 100
WARNING
2014-03-21 12:43:39.140
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/P0P/J00/exe/sapjvm_6/bin/java -classpath /usr/sap/P0P/SYS/global/sltools/sharedlib/sap.com~tc~bl~offline_launcher~impl.jar com.sap.engine.offline.OfflineToolStart com.sap.inst.checkKeyPhrase.CheckKeyPhrase /usr/sap/P0P/SYS/global/sltools/sharedlib:/usr/sap/P0P/SYS/global/security/lib/tools -f /usr/sap/P0P/SYS/global/security/data/SecStore.properties -nomask" finished with return code 100. Output:
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
TRACE
2014-03-21 12:43:39.140
check key phrase returns: 100
TRACE
2014-03-21 12:43:39.141
NWException thrown: nw.syscopy.java.secStoreFSException:
Error checking key phrase, see output of log file '/usr/sap/put/checkKeyPhrase.log'.
TRACE
2014-03-21 12:43:39.142
Function setMessageIdOfExceptionMessage: nw.syscopy.java.secStoreFSException but already set to nw.syscopy.java.secStoreFSException
TRACE
2014-03-21 12:43:39.269 [iaxxgenimp.cpp:660]
CGuiEngineImp::showMessageBox
Error checking key phrase, see output of log file '/usr/sap/put/checkKeyPhrase.log'.
TRACE
2014-03-21 12:43:39.270 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE
2014-03-21 12:43:42.489 [iaxxdlghnd.cpp:165]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE
2014-03-21 12:43:42.490 [iaxxcnclhd.cpp:158]
CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
CCancelHandler: ACTION_ERROR received
TRACE
2014-03-21 12:43:42.490 [iaxxgenimp.cpp:1137]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
CheckKeyPhrase.log
INFO
2014-03-21 12:43:39.113 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 202.
Logs are attached.Request you to please have a look on this with priority.
Regards,
Sudheer.

Hi Sudheer,
You need to provide the keyphrase correctly.
<global directory>/sltools/checkKeyPhrase(.sh) -f <global
directory>/security/data/SecStore.properties'.
If you don't know the keyphrase...ten change it in configtool and take a restart of the system since you have the downtime with you.
Activating Secure Storage in the File System (SAP Library - System Security)
With Regards
Ashutosh Chaturvedi

Authority issues after homogeneous system copy - as/400 v5r1 - R/3 4.6C

Hello,
I am trying to complete a homogeneous system copy of an R/3 system.
The source system is PRD - the target system is TST. The hardware platforms are different (both iSeries) but the kernel/pdf/OS patch levels are all identical.
The process I have follow so far is this:
1. Preprocessing of the R3PRDDATA library.
2. SAVLIB of R3PRDDATA.
3. Delete old R3TSTDATA lib on target system using QSECOFR
4. Create new R3TSTDATA using SQLUTIL as TSTOFR (TSTOFR is my user for the target system)
5. CHGOBJOWN OBJ(R3TSTDATA) OBJTYPE(*LIB) NEWOWN(TSTOFR)
6. GRTOBJAUT OBJ(R3TSTDATA) OBJTYPE(LIB) USER(SAP02) AUT(CHANGE)
7. Detach existing Journal, create new journal receiver, create new journal ...
DLTJRN JRN(R3TSTDATA/QSQJRN)
DLTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001)
CRTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001) THRESHOLD(500000)
CHGOBJOWN OBJ(R3TSTJRN/QSQJRN0001) OBJTYPE(*JRNRCV) NEWOWN(R3OWNER)
CRTJRN JRN(R3TSTDATA/QSQJRN) JRNRCV(R3TSTJRN/QSQJRN0001) MNGRCV(SYSTEM) DLTRCV(NO)
CHGOBJOWN OBJ(R3TSTDATA/QSQJRN) OBJTYPE(*JRN) NEWOWN(R3OWNER)
8. RSTLIB from tape.
9. AS4FIXFILE on R3TSTDATA with
 DBLIB R3TSTDATA
 CHGOWN *NO
 ENDJRN *YES
 STRJRN *YES
 CHGFILE *NO
10. install license key
So from this point the system will start without a problem. However whenever I try and write something to the database I get this type of error (via SM21 or ABAP dump) message:
Database error -551 at SEL access to table BTCOPTIONS
 Not authorized to object BTCOPTIONS in R3TSTDATA type *file
 Job=378721/TST02/WP02
Database error text........: "Not authorized to object SCPRACTR in R3TSTDATA
type *FILE. Job=379089/TST02/WP00"
I have also run GRTOBJAUT for the - TST02 user on the R3TSTDATA lib but still the same problem.
I'm certain the issue is related to the user on the 400 that is actually used by the work processes, and that user does not have the relevant rights to R3TSTDATA.
Any suggestions on how to resolve this problem will be humbly received.
Many thanks, Colin

Hi,
step 9 is wrong ;-(((
old:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *NO
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
correct:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *YES <<<<<
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
it NEEDS to run with QSECOFR !!!
=> it will work !
GRTOBJAUT on all objects is rubbish only !!! no real solution!!!
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

System copy for ECC 6.0 system no j2ee process under MMC

Dear support,
This has been observed in many of our clients system which are on ECC 6.0 abap+java system, that after we perform system copy from one system to another
whether it is Oracle platform or mssql server platform ( system copy for oracle using controlfile script ) ( system copy for mssql with restoring .BAK file from source )
systems are running fine but j2ee process table showing no processes like
SDM, dispatcher , server0
even configtool and go.bat are unable to connect.
Is there any specific settings we do after system copy for java side
Please let me know at earliest, as it is most strange thing i have seen in almost all my system where system copy is performed.I have already raised a post against this error but at that time i was not aware of this system copy reason behind the same.
Best regards,
AjitR

Your main problem is not, that you don't see anything in MMC (the system can be added manually without much hazzle) - but is, that you database content of schema SAP<SID>DB does not match the data found on the filesystem.
If you copy the filesystem structure from production to test/qa, you need to make sure, the database and filesystem are in sync. You will have two problems if you "just copy them":
- They are out of sync because your production was going on running since you copied the backup files
- all configuration (all java property sheets) is/are set to point to the production system instead of the test/qa system
I doubt, that it will work if you copy it over. This also explains, why you can't even start configtool, because it points to the wrong system/schema. You MAY be able to fix all that manually, but you may encounter subsequent errors because not all configuration is documented, you would need to step into the whole j2ee tree and look at each and every propertysheet to find out, whether it's correct or not. Additionally, the database may have other information (see above) and all that may become overwritten during bootstrap.
So - the best way to get your system up and running quickly is to start sapinst on the source system, export your Java instance (not using ABAP but the Java dump) and re-importing that to your test/qa system.
Markus

Issue on System Copy

Dear Guru,
We are doing system copy of DEV to QAS, facing issue on Start instance phase.
Error msg :
Connect to message server (hostname/3900) failed: NIECONN_REFUSED
ABAP processes of instance SID/DVEBMGS00 [ABAP: MSNOTRUNNING] did not start after 10:30 minutes. Giving up.
OS : AIX
DB : DB2
SAP : ECC 6.0
Anyone suggest me for this issue.
regards,
Guna

Hi Raghu,
Check the host file & service entry, no issue on that.
some of the log message has been pasted for your reference.
TRACE 2010-02-06 11:57:49.398
NWException thrown: nw.progress.waitingForStartABAPFailed:
ABAP processes of instance HMQ/DVEBMGS00 [ABAP: MSNOTRUNNING] did not start after 10:30 minutes. Giving up.
TRACE 2010-02-06 11:57:49.399
Function setMessageIdOfExceptionMessage: nw.progress.waitingForStartABAPFailed
WARNING[E] 2010-02-06 11:57:49.399
 CJSlibModule::writeError_impl()
CJS-30149 ABAP processes of instance HMQ/DVEBMGS00 [ABAP: MSNOTRUNNING] did not start after 10:30 minutes. Giving up.
TRACE 2010-02-06 11:57:49.400 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2010-02-06 11:57:49.490 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 1040602
TRACE 2010-02-06 11:57:49.685 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 1040604
ERROR 2010-02-06 11:57:50.66 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2010-02-06 11:57:50.181 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > IBM DB2 for Linux, UNIX, and Windows > Target System Installation > Central System > Based on AS ABAP > Central System. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERPEhP4/LM/COPY/DB6/SYSTEM/CENTRAL/AS-ABAP/. </body></html>
TRACE 2010-02-06 11:57:50.181 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly suggest me on this.
regards,
Guna

J2ee engine does not start up after system copy

Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
 at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
 at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
 at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
 at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
 at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
Tajinder

Hi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments :
 arg[00] : jcontrol
 arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
 arg[02] : -DSAPSTART=1
 arg[03] : -DCONNECT_PORT=64380
 arg[04] : -DLISTEN_PORT=64381
 arg[05] : -DSAPSYSTEM=00
 arg[06] : -DSAPSYSTEMNAME=BD1
 arg[07] : -DSAPMYNAME=BWQAS_BD1_00
 arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
 arg[09] : -DFRFC_FALLBACK=ON
 arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host : BWQAS
-> ms port : 3601
-> OS libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : BWQAS
-> ms port : 3601
-> os libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
 Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : ppc64
-> heap size : 512M
-> root path : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder

J2ee System copy issue

Similar Messages

Maybe you are looking for