J2EE upgrade to accommodate DST 2007 changes

Hi,
We are running EP 6.0 SP2P4 on J2EE 6.2. When accommodating DST 2007 changes, we found out as per the note 983147:
The 6.20 J2EE Engine is based on JDK 1.3 and is out of support end of 2006. Therefore no fix will be provided for this JDK version. So all customers running on 6.20 J2EE Engine must switch to higher versions before march 2007.
Thus you have to 1) switch to 6.40 and 2)have jdk version 1.4.2_11 or
higher to have the automatic fix of Daylight savings.
HELP! - If you can provide some pointers to any documentation on how to upgrade this, or if there is any workaround, I would greatly appreciate it.
Thanks!
Nirmal

Hello Nirmal,
Please read the upgrade documentation that you can find in the following path:
http://service.sap.com/instguides -> SAP Netweaver -> SAP Netweaver 2004 (or SAP Netweaver 2004s) -> Upgrade
And about the minimum JDK version to use, you will find information in the SAP Note below:
723909 Java VM settings for J2EE 6.40/7.0
Inside this note you will find the notes for each Operating System. This notes tell you what is the minimum version to use depending on the Operating System used.
Best regards,
Rafael Toshiaki

Similar Messages

Solaris 10 - patch for new DST 2007 changes

I am trying to track down the one patch I need for the new standard for daylight savings time date changes that took effect in 2007. Each time I get one patch and read the readme file, it tells me I need another patch for the U.S. Energy Policy Act for 2005. I am just about to install Solaris 10 patch 119689-07. I don't need any other patch updates, just the bare minimum new DST patch. Thanks for your help.

119689-07 is obsoleted by 118836. http://sunsolve.sun.com/search/document.do?assetkey=1-21-119689-07-1
118836-36 is latest rev of this patch -- the kernel patch, whic has latest timezone data for the OS
You'll need to make sure java has latest tz data, too:
http://java.sun.com/javase/timezones/
As far as I know, these are the bare minimums for a system to function properly re: latest DST schedule

US DST 2007 Changes - JDK1.3

Hello,
Pls provide me the solution for this DST changes in case of JDK1.3. Seems Sun has not released any patch for this version.

The solution that suggected there is to upgrade the JRE.
I cant upgrade the JRE (using in 1.3).
Does any one has a soltion what to do in ver 1.3?
as i understand it will not help to replace to zi folder because 1.3 dosnt support in multiple dst

DST 2007 changes and Oracle9iAS

Friends
Do anyone know if there is any requirement to apply any patch on Oracle 9i Application server (9.0.2).
We already have our OS, Oracle 9i database and database JVM patched for DST changes.
Thanks

Vishal,
We are also on 9iAS R2 and have the default oracle 9.0.1.4 Database on the infrastructure. You need to basically check for
1. Do you have any user defined TSTZ and TSLTZ types.
2. Do you use TSTZ or TSLTZ types or the TZ_OFFSET functions any where
3. Do a searchon Time Zone in all our pl/sql code and column names and did you find any thing??
If answers are NO ....You don't need any patches...
On the server side ...You just need to update the environment file
and check for
1. echo $TZ
YOU SHOULD GET BACK THE SETTING YOU DID IN THE ENVIRONMENT FILE ..
2. JDK patches are available with IBM
Usefull URL's
http://www-1.ibm.com/support/docview.wss?uid=isg3T1000252
Metalink Note Note 359145.1
If any more doubts
mail me on
[email protected]
Thanks
Vishnu Vardhan Reddy Singireddy

Adobe 9 Pro not working properly after upgrading to MS Office 2007

I have Adobe 9.0.0 Pro on my Windows XP machine. We had been using MS Office 2003 (Word, Excel, Powerpoint, etc) and I had in my prologue.ps file added a bookmark to be added when I create a pdf. This worked fine. We then upgraded to MS Office 2007 and the bookmarks are now NOT created. The only difference is the change from Word 2003 to Word 2007. Also if I have a Word document with Times New Roman font and I create the pdf, the font changes from Times New Roman to something that looks like Arial. If I save the the document as a pdf, it changes the font. If I print the document as a Adobe pdf, it comes out find. Any suggestions on how to fix the issues?

Our machines are locked down for any changes. Any updated/upgrades/changes must be made by our IT folks.
Peter J. Gore Willse, P.E., FSFPE
Vice President - Director of Research
Global Asset Protection Services, LLC
100 Constitution Plaza
12th Floor
Hartford, CT 06103. USA
(P) +1 860 293-7900
(C) +1 860 460-1965
(F) +1 860 293-7907
Email: [email protected]
Website: www.xlgaps.com
An XL Group Company
Follow us on Twitter at www.twitter.com/xlgaps

Upgrade the existing Moss 2007 licence to SharePoint 2013.

Our customer is using the Moss 2007 enterprise version with 500 CALs currently. They want to move to SharePoint 2013. I need to purpose the migration cost.
I am wondering -
does it possible to upgrade the existing Moss 2007 licence to SharePoint 2013.
Do customer has to purchase new licence?
Will existing licence help in any way if new licences are required?
Regards Restless Spirit

I assume you will have to purchase new licenses and you may get discount based on your company contract. Check below:
http://office.microsoft.com/en-in/sharepoint/sharepoint-licensing-overview-collaboration-software-FX103789438.aspx
http://blogs.technet.com/b/volume-licensing/archive/2013/08/08/licensing-how-to-sharepoint-server-2013-licensing-changes.aspx

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

HT1711 I just down loaded the upgraded itunes now i cant change the order of my songs on a playlist

With the new upgrades itunes How do I change the order of my songs on my playlist. I used to just drag it up on down in the list
this does not work now

Control click one of the out-of-order songs. Choose "Get Info". Click the "Info" tab. You will see "Track Number" XX "of" YY. Change the first number there.
Do the same for all songs that need correction.

STZBC table need to be updated correctly for DST Brazil Change.

Hi All,
STZBC table need to be updated correctly for DST Brazil Change.
I see two options to change it:
1) Create a new line for 2009 in STZBC -> Variable time zone rule in DT1 and create the transport
2) Apply SAP Note 198411 (attached) in DT1 and create the transport
I have have concern for daylight saving as according to Note 1251372 there is no standard daylight saving time in brazil .
this note mention daylight saving for 2008/2009 (i,e daylight saving time in Brazil begins on October 19, 2008 and ends on February 15, 2009.) and this note is the latest note available.
what would be daylight saving time in brazil for year 2009/2010? should i need to raise message to SAP asking for any new note applicable to daylight saving?
Thanks for your help in advance.
Thanks&Regards
Shams

done

I just upgraded my Macbook (late 2007) into X Lion , but the multi touch gestures is not working. Is this not compatible with my Macbook?

I just upgraded my Mackbook (late 2007) into X Lion , but the Multi Touch gestures is not working. Is this not compatible with my Macbook?

jimmyfromdubai wrote:
... do I need to buy a new MAC office?
A better solution is to try a number of better, free alternatives. Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
I use Apple's Pages ($19.99) as well as OpenOffice and have been completely Microsoft - free for over a year now. Life is better without Microsoft.

Is J2SE 5.0 update 6 or 7 DST 2007 compliant?

This website states J2SE 5.0 update 6 or later is compliant:
http://java.sun.com/developer/technicalArticles/Intl/USDST/
Whereas this website states J2SE 5.0 update 7 and later is compliant with the new DST 2007 rules.
http://java.sun.com/javase/tzupdater_README.html
Does anyone know how to tell if update 6 is compliant? If there's no way to tell, can I use the tzupdater tool against 5.0u6 anyway w/out any bad consequences?

This forum is in support of Java Enterprise System installation questions. You should get better feedback on your question at the Java Installation forum which addresses the Standard Edition of Java:
http://forum.java.sun.com/forum.jspa?forumID=14
Thanks,
Chris

Upgraded to iphoto 11 to change layouts for a book I am making. Help!

Upgraded to iphoto 11 to change layouts for a book I am making.
Layout change went great but now I have text in the lower right hand corner of my cover that I cannot remove.
It is the old title of the book but smaller and where the page number would be. Show/Hide page number has no effect although changing the font for page numbers does affect the text.
I really do not want to start over. I have tried changing layouts to no avail. I wish I could make a new cover and just import it to replace the one I have. Any ideas? Is there a command line fix that could solve this?
Thanks for any suggestions!

check a preview of the book and see if it is there - Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

DST time change for global companies

We are curious to hear how other companies are handling the DST time changes in spring and fall especially if they are global and operating in multiple time zones.
Do you set servers to UTC/GMT?
And set SAP systems to UTC?
And let users set their local time zone?
Would that mean we don't have to worry about the fall and spring time change any more because UTC doesn't change? (That would be nice!)
TIA,
Margie

Hi Volker,
these "right setting" makes me unconfident.
note 7417 tells me that that better shut down the system because the majority of the applications are not certified for a continued operation
note 102088 tells me how to minimize the downtime to one hour... these is the procedure we were using the last years
note 950114 tells me how to avoid the double hour by using zdate/DSTswitch_contloctime (=on you need not to shut down the system)
note 391658 tells me "If you are converting from summer time to winter time, shut down all SAP instances before the scheduled conversion (for example, at 01:30) and wait at least an hour before you restart them."
Your experience to let the systems run was quite good, but it is dissapoints me that SAP does not give a distinct statement about the DST. As mentioned befor, it is not practicable to shut down the SAP system in a global environment.
cu, Christian

Upgrade list of transactions that changed

Hi all,
We are upgrading from 4.6C to ECC 6.0. Is there somewhere where I can find a complete list of transactions that have changed? IE have a screen change where our BDC programs will no longer work.
We'd like to get an idea of how big of an effort the upgrade will be as far as custom programs. We have some BDCs that can be changed to BAPIs in 4.6C. But like many of you the work, doesn't stop just because we are going to upgrade. So rather than change all the BDC programs that we can, it would make sense to only change the ones on the list.
Thank you,
Michelle

That's not quite what I was looking for. I probably didn't phrase my question well.
Can anyone tell me the transactions for the screens that have changed in ECC 6.0 from 4.6C? We have BDCs and are looking for a way to determine which programs will no longer work - prior to having an ECC environment and just running the programs.
Thank you,
Michelle

[svn:fx-trunk] 11193: fix packaged build file for textlayout to accommodate the recent changes made to that project

Revision: 11193
Author:   [email protected]
Date:     2009-10-27 13:08:28 -0700 (Tue, 27 Oct 2009)
Log Message:
fix packaged build file for textlayout to accommodate the recent changes made to that project
QE notes: no
Doc notes:
Bugs: sdk-23302
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23302
Modified Paths:
    flex/sdk/trunk/frameworks/build_framework.xml

There are two main annoying problems with Flash Builder and swc's:
1. Flash Builder doesn't reflect changes made to swc files
Solution : First of all - keep your swc files inside your project folder, you can also disable global swc cache: change as3api.cpp code,refresh swc in flashBuilder bug!
2. Flash Builder breakes content inside swc files (and also popular problem "TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@1f21adc1 to...")
Solution : locate the project .actionScriptProperties file and set useFlashSDK=”false” : Flash Builder 4.7 – useFlashSDK | In Flagrante Delicto!
In this case you can also download latest Apache Flex SDK to target new Flash player versions: http://flex.apache.org/
Hope this helps!
P.

J2EE upgrade to accommodate DST 2007 changes

Similar Messages

Maybe you are looking for