J2iu Not Showing Previous month Balances For PLA (High Priority)

Dear Gurus
We are using Transaction J2iu for Fortnight Utlization. Now When we are
trying to utlize PLA for the second Fortnight Of month March 07, The
System is only showing the Current Month Balances ie The Balances for the
month Of March 07 , And not accounting the balances for the previous months.
Kindly Suggest .

Carry Forward the GL Balances to Next Year i.e in Apr.07 &
then Try it out again.
Sometimes, System takes into account reatime balances & not balances as on particular posting date.
Regards..
Ameya...

Similar Messages

LR4.3 does not show previously imported CR2 files (5D mark III) by trial version

LR4.3 does not show previously imported CR2 files taken using 5D mark III by trial version.
When tried to synchronize the files not show when browsing, the import window comes up. All the Jpeg files, Raw files are seen in the window. None of them are highlighted nor selectable. LR is assuming that those files are already imported but if imported they are being shown for browsing or editing

Maybe you have set a Filter in LR. Press Ctrl-L once or twice to turn it off.
Maybe you don't have "All Photographs" selected in the Catalog Panel on the left.

Vendor Ref No. does not show in Journal Entry for AP Credit

AP Invoice journals show the vendor reference number in field Ref 2. However, when creating an AP Credit memo, the vendor reference number does not show in the journal for the credit memo, instead the field Ref 2 is used for the base document number.
I have two clients who have pointed out that they would expect to see the vendor ref number in the Ref 2 field in the journal when an AP Credit is created, as this is the functionality for Goods Receipts and AP Invoices.
Both clients are currently manually updating the Ref 2 field in the journal for AP Credit, so that in the BP account transactions view they can sort field Ref2 by vendor reference number.
Does anyone have any suggestions on a work around for this?
Thanks,
Lianne Plant

Hi Lianne Plant,
You may check: Journal Ref2 field : AP credit note
Thanks,
Gordon

HT1727 help how do i make a purchased song my ring tone, it;s not showing on my list for ringtones

help how do i make a purchased song my ring tone, it's not showing on my list for ringtones

This song was purchased from the iTunes Store?
If so, you can't create a ringtone from music that was purchased from the iTunes store, but if there is a ringtone available for purchase and download at the iTunes Store with this song, you need to do that.
For music in your iTunes library on your computer that was not purchased from the iTunes store, there are a number of ways to create a ringtone with such music. With a Mac, there is an inexpensive or free app avaiable via Apple's online App Store named Ringer. Ringer has access to all music and sound files in your iTunes library that was not downloaded from the iTunes Store for creating your chosen segment of the song to be used for the ringtone. The app places the created ringtone in your iTunes library under Tones for transfer to your iPhone when syncing.
Creating ringtones on a Mac can also be done with GarageBand, and there is a manual way of doing this with iTunes.

How to Bring the Quarter Period and Previous Month Value for given Input

Hi to all,
      I want bring Quarter Period and Previous Month value for the given Input. Plz help me on this
Example :
Input : 06.2008
Output:
Input     Prev.Month Quarter 1   Quarter 2   Quarter 3
06.2008 05.2008      03.2008     12.2007     09.2008
12.2008 11.2008      09.2008      06.2008    03.2008
Is there any Standad Exit for this or we have to write coding ?
Regards,
Saran

Hi,
You can solve this by using Replacement path.There you have a option offsets.Here give the current period.Based on that give the number which previouse month you suppose to want.
I think this 'll help you
assign points if this helps
Regards
JT Goud

SAP Note 1614681 - ESI monthly report for filing details of ESIable employe

Any one implemented this SAP Note
While doing the manual steps mentioned in SAP Note 1614681 - ESI monthly report for filing details of ESIable employees .
we found some difficulties.
Please let me know the steps that you followed while implementing this.
Note Summary
Symptom
As per the new rule introduced by ESIC authorities, an organization is liable to file details of employees eligible for ESI contribution during a particular period/month. Details are to be uploaded on the ESIC website in the format prescribed by the ESIC authorities. Currently, as a part of SAP standard delivery, ESI Form5 and Form6 are provided which are used to report ESI contribution for a period of six months. However, there is no such provision to generate monthly ESI details in system and report it to the ESIC authorities.
Other terms
HINCESI0, PC00_M40_ESIF, ESI , Employee State Insurance, ESI Monthly report, IT0588, ESIC.
Reason and Prerequisites
Legal Change.

Hi,
We tried to apply the manual steps mentioned along with the note. We were able to do first two steps that is inserting the messages in message class and creating new text elements..
When we tried for the 3rd step, we are facing the problem..
When we gave the name ''HR_IN_ESI_MON_DET '' in SE18 and and try to create it asked for the package...since it is SAP standard we gave PC40( since all ESI badi is saved in this package i gave this) for the package name.....and it got created and each time it was asking for Access key...( After providing access key in each step it got created)
Now when i check in SE80 this enhancement is there....but if i check in SE18 it says Enhancement spot doesn't exist.
check the screen shot:
http://www.mypicx.com/10052011/ESI_manual_Steps/

Lightroom 5 is not showing previous sucessfuly imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?

If the images are not identified as missing ... then you can't reconnect them
But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail...

HT5035 I just entered an iTunes gift card and I am repeatedly asked to sign in. I am already signed in and it is not showing the card balance on my account. Please help?

I just entered an iTunes gift card and I am repeatedly asked to sign in. I am already signed in and it is not showing the card balance on my account. Please help?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the Mac?
How to reset iPod
Has this iPod ever worked on this Mac or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in iTunes and Mac desktop
B-rock

Query:Pop up on login for incomplete high priority tasks in sap inbox

Hi All,
I am having requirement to display pop up for incomplete high priority in sap inbox on loging in sap.
I wil be thankful if you can guide to fulfill this requirement.
Thanks.

Hi,
To get the High priority work items you can use the table SWWWIHEAD.
using this table you can get the Priority, Status, and agent of the work item. Using this you can build the logic to
display the pop up with this details.
Thanks,
Viji.

Trial Balance Report not showing in months

Hi All.
A client is trying to run a trial balance, wanting it to display in months.
He chooses monthly report, but it still gives just one total amount.
The company he is running is a seconday company.
He ran the report in the main company and it works fine..it shows the trial balance in months.
Edited by: Jerusha Lala on Feb 18, 2010 8:17 AM

Hi Jerusha,
Have a look at the Posting period. The reason could be the posting period was set up with "Year" instead of 'month'.
If the posting period was set up with "Year", when a transactions is recorded, they will all belong to eg: 201001.
If the posting period was set up with "Month" and subperiod=12, then when a transactions is recorded, they will be split into 201001, 201002, 201003 etc etc ... 201012.
When positing period is not set up correctly, you will find out very soon that the standard financial report, eg: Profit and Loss will not split the information in the period as expected when running Monthly, Quarterly.
Note that XL reports that make use of Financial period, to get Monthly figure will not work as well.
Regards,

Need to show Previous months data in report

Hi All,
I have a crystal report 2011 which shows monthly Cash data. It has 3 other columns like Previous 3 months cash data, previous 6 months cash data, Previous 12 months cash data in report.
My report also has two parameters- start date and end date. If I give Start date as 1/1/2012 and end date as 12/31/2013 (two years date range) then correct data comes in all columns and for 2013 year, correct data is coming for Previous 12 months column. But if I give only one month date range like start date as 1/1/2013 and end date as 01/31/2013, then it is not showing correct data for these 3 columns - Previous 3 months cash data, previous 6 months cash data, Previous 12 months cash data. Ideally as per requirement, it should calculate previous months data regardless of parameter values and put data in respective columns.
Any help/suggestion? Any trick which can help me to show correct data in all columns no matter what date range or months I am taking in parameters.
Is it mandatory to have previous 12 Months data in report to calculate column-Previous 12 months Cash data?
Thanks,
Remi

Hi Remi,
You can try like this:
I have given a some suggestions i.e You just take one parameter only because u can imagine 3 columns previous data display correctly i.e From Date
Month parameter is also a alternate option.
For Ex: Column1: From Date - 90 Days/3 Months - we get the three months previous data correctly etc.
Finally, create a stored procedure that returns the required columns and does all the calculations on the database side.
Follow abhilash suggestion as well.
Useful threads: Crystal Report Parameter Issue
Pull Last 6 months of data
Month to date data for Previous month
How to find current month, previous month Net Sales by means of formula?
Thanks,
DJ

Image Icon not showing in "get info" for OS 10.9.4

     I now have PS CC 2014 and the image icons are showing the "generic" .jpg and .psd files in the "get info" finder window, but on my desktop the images are showing their
     proper image icon.
     I was previously using PS CS 5 and the icons are showing up in the "get info" window, but with PS CC 2014 these icons are showing up as generic.
     To be clear the images I saved using PS CS 5 are showing the icons vs. the images I saved in CC 2014 where the icons are not showing in the "get info" window.
     I've compared preference settings with PS 2014 and PS 5 but their basically about the same.
     I'm including 2 images so you can see what I'm explaining. IMG_1627 is a PS CC2014 created image and Arturo is a PS 5 image.
     I did read about other PS users having similar issues but it looked to be unresolved.
     You may think what's the big deal, but I use these image icons to label my folders. A "trick" I've doing for over decade which helps keep my folders visually on track for me.
     Is anyone out there able to solve this issue??

I do on occasion get jpgs and pngs that won't render a thumbnail or preview in MacOS. I have 10.9.5
I don't have this problem, although I just have CC and CC 2014 on my Macbook.
I would open those up in Preview.app and try a Save As... and I would get the thumbnail and thumbnail preview back.
Not really the best idea,but you can see if it helps.
These are my file saving options, perhaps there is something there you can try.
Gene

Album Cover/Title not showing in the List for an Artist with one album.

Hello all.
I have browsed a number of the posts, but nothing close to my particular problem.
I am new to iPod Classic (a couple of months). I like it! Used to be a Creative Zen Vision:M user.
Here is my issue.
I have most of the covers for my albums. Still looking for a few.
When I go to the Artist's menu and pick an artist, if it has more than one album, it shows 'All Songs' and a list of albums with covers, album name and number of songs on a separate screen. You click an album and it shows the tracks, you click a track and away you go. That works just fine.
However, when the Artist only has one album, it does not show the album cover, name and number of songs on a separate screen. It just shows the list of tracks. I would like it to be consistent. I would like to see the album cover/name before I click the tracks to start.
I have worked all my songs in iTunes. I'm pretty sure there is no difference between the one and multiple album artists.
Of course when you click a track to start, the album cover shows on the Now Playing screen.
Is there some sort of setting I might have missed.
Any thoughts on this? What might I try?
Thanks in Advance ...
Bob

Wow!
Is that really so?
I'm not questioning your answer. Just want to make sure before I say OK and let it be. I had heard that iTunes/iPod forces you to do things their way, this is an example, I guess!
Thanks for the input.
I guess I'll just have to leave it be!
Is iTunes the only way to deal with iPod? Are there any other programs?
Bob

Calendar in ios7 on ipad not showing correct month.

After updating to ios 7 on my iPad with Retina the calendar app will not show the correct month in the future. If I scroll back in time the months will change correctly. ie: The name of the month at the top and the dates will change correctly. If I scroll forward in time the name of the month at the top will be off by
one month.ie: If I scroll forward to December, November stays at the top (see attached photo). If I scroll to January, December show up below. I just updated to ios7.04 and it is still doing it.
I've tried unselecting calendar events to show so that it's a blank calendar and that did not help.
Any way I could fix this?
Thanks.

No, the appointments will not "get messed up". If you leave time zone support off the calendar will stay exactly as it was at home. If you turn on time zone support for the new time zone you're in ( or other country ) the appointment times will change or convert to times and days in that zone or country. When you turn off time zone support after returning home it'll all convert back to that time zone.
Example. You have an appointment (10am Thursday) with Joe in your hometown in Chicago. On Tuesday you fly to Tel Aviv and switch Time Zone Support on for Tel Aviv. The calendar will show the upcoming appointment with the newly converted time and date in the calendar. At that new time and date of the appointment it'll be 10am Thursday back home.

J2iu Not Showing Previous month Balances For PLA (High Priority)

Similar Messages

Maybe you are looking for