J2iun Balance in Transaction currency error

Dear Experts,
I am facing a problem in J2iun balance in transaction currency. Message no. F5 702
I checked the entry in simulation mode, its not equal to Debit and credits, the entry as below
Dr ED payable 4,971.00
Dr Cess payable 99.00
Cr RG 23A ED Cenvat Account 4,971.00
Cr RG23A EC Account 99.00
Cr loans 50.37
i want to know the actual entry while do the j2iun. and what correction i need to do in j1it GL Assignments.
i will appreciate your immaidate response.
regards,
Gopi.P

Hi,
Please check the assignments which you have done for excise transactio type UTLZ.
After that assign proper G/Ls in account determination for the same.
It seems, some account are not assigned to UTLZ, that's why system is giving this error as your debit & credit amount should be equal (Dr & Cr)
Regards,
Piyush

Similar Messages

  • Balance in transaction currency error for AUC settlement

    I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
    so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
    I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
    Or perhaps am I heading to the right way in identifying the root cause of this issue?
    This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
    Any positive reply is welcomed!
    I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
    [Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
    Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM

    I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
    so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
    I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
    Or perhaps am I heading to the right way in identifying the root cause of this issue?
    This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
    Any positive reply is welcomed!
    I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
    [Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
    Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM

  • J1IEX: Balance in Transaction Currency ERROR

    All SAP Gurus,
    While doing J1IEX: Balance in Transaction Currency ERROR occurs.
    This happens only when figures are not even in case of capital goods credit.
    Which SAP Note to be applied so that, system will accept odd figures too.
    Regards,

    Hi Rajan, Check the following threads :
    Balance in transaction currency
    Re: Balance in transaction currency Error

  • Balance in transaction currency error

    Hi Friends,
    In order to ressolve "Balance in transaction currency"  error during J1IIN, we have applied oss notes 1018071 & 978186. However we are getting same promblem
    Please help on this.

    Hi shiv,
    Kindly refer this threads,
    Balance in transaction currency
    Error : Balance in Transaction Currency
    Error F5702 Balance in transaction currency VF01
    Re: Balance in  Transaction Currency
    error in Balance in transaction currency
    Balance in transaction currency
    Thanks,
    Swamy H P

  • "Balance in transaction currency" Error in Depreciation Posting Run-AFAB

    Hi,
    We are having unit testing going on during ECC6.0 upgrade.I am getting following error while posting Asset Depreciation -AFAB.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'AUD' with the following details:
    Exchange rate '00', amount '           467.00-' and currency key 'AUD'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Please advise what can be the reason of this issue.
    Thanks & Regards,
    Prince Kochhar

    Hi shiv,
    Kindly refer this threads,
    Balance in transaction currency
    Error : Balance in Transaction Currency
    Error F5702 Balance in transaction currency VF01
    Re: Balance in  Transaction Currency
    error in Balance in transaction currency
    Balance in transaction currency
    Thanks,
    Swamy H P

  • Balance in transaction currency error in sap j1iin

    Hi,
    I am facing an error during creation of excise of 'balance in transaction currency error in sap j1iin'.But when we are creating EI in background the system is not getiing the error of Balance in transaction currency error.
    We have applied the Note# 1018071 - Error "Balance in transaction currency" (F5702) in J1IIN has been applied. This covers the correction for note # 978186.
    But the system is still giving me the error in forground.
    I have the serach the forum:
    1-Excise Invoice Error In J1IIn
    2-Balance in transaction currency error in J1iin
    But unable to find the solution.Kindly guide me on this.
    Regards
    Rajev

    Hi Srinath,
    Thanks For Reply.
    Please find my comment on above points:
    1-SPRO -> Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Maintain Company Code Settings. In the Company Code check wheather Rounding rule is on or off.If it is off , change it to on and then run again.
    **I have make the rounding rule on for outgoing excise Invoice**
    2) SPRO->Excise config->Business transaction-> Utilization-> in utilization you have 2 options First option is Utilization Determination & another one is Maintain minimum Balances for Excise Account.Change the Utilization Determination to 100
    I have maintained the setting as per  below:
    For Utilization Determination
    L1     PLAAT1 PLA AT1 account     100     
    L1     PLABED PLA BED account     100     
    L1     PLACESS PLA cess account     100     
    L1     RG23AAT1 RG 23A AT1 account     100     
    L1     RG23ABED RG 23A BED account     100     
    L1     RG23AECS RG 23A ECS account     100     
    L1     RG23CAT1 RG 23C AT1 account     100     
    L1     RG23CBED RG 23C BED account     100     
    L1     RG23CECS RG 23C ECS account     100     
    Maintain Balances
    L1     PLAAT1 PLA AT1 account     100,000.00
    L1     PLABED PLA BED account     100,000.00
    L1     PLAECS PLA ECS account     100,000.00
    L1     RG23AAT1 RG 23A AT1 account     100,000.00
    L1     RG23ABED RG 23A BED account     100,000.00
    L1     RG23AECS RG 23A ECS account     100,000.00
    L1     RG23CAT1 RG 23C AT1 account     100,000.00
    L1     RG23CBED RG 23C BED account     100,000.00
    L1     RG23CECS RG 23C ECS account     100,000.00
    3) Also check IMG->Logistics General- >Tax on Goods Movements->India->Account Determination->Specify Excise Accounts per Excise Transaction.
    Check all the ETT having the ECS and Secondary Education Cess.
    But still facing the same error.Could please guide me on this.
    Thanks for Your responce.
    Reagrds
    Rajev.

  • Balance in Transaction Currency Error while Running J2IUN

    Dear Expert,
    Hope you all must be doing great.
    While running the J2IUN transaction, System is generating Balance in Transaction currency becouse Cr PLA HECess repeatation.Here Credit side is 600 higher than Debit entry.please find the details of Accounting entry of Utilization.
    Dr 0000168204 92,667.36 Excise Duty Payable(S&H Education Cess)1%
    Dr 0000168200 9,266,733.62 Excise Duty Payable
    Dr 0000168205 185,334.71 Excise Duty Payable(Education Cess)
    Cr 0000168210 1,300.00 Excise - PLA Depositable
    Cr 0000168215 400.00 Excise - PLA Depositable(Education Cess)
    Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
    Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
    Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
    Cr 0000120030 9,265,433.62 Service Tax- Plant @ 10%
    Cr 0000120035 184,934.71 Service Tax- Plant -Ecess @ 2%
    Cr 0000120033 92,367.36 Service Tax- Plant -S&H Ed Cess @ 1%
    Please help me.
    With Regards,
    Manoj Singh

    Hi
    Check settings in
    SPRO - Logistics general - Tax on Goods movements - India - Basic settings - India - Account Determination - Specify Excise Accounts per Excise Transaction
    (the duplication could come from here)
    and also check for GL assignments in next step
    Thank You,

  • Balance in transaction currency Error while using J2IUN

    Dear Expert,
    Hope you all must be doing great.
    While running the J2IUN transaction, System is generating Balance in Transaction currency becouse Cr PLA HECess repeatation.Here Credit side is 600 higher than Debit entry.please find the details of Accounting entry of Utilization.
    Dr     0000168204     92,667.36     Excise Duty Payable(S&H Education Cess)1%
    Dr     0000168200     9,266,733.62     Excise Duty Payable
    Dr     0000168205     185,334.71     Excise Duty Payable(Education Cess)
    Cr     0000168210     1,300.00     Excise - PLA Depositable
    Cr     0000168215     400.00     Excise - PLA Depositable(Education Cess)
    Cr     0000168227     300.00     Excise - PLA Depositable(S&H Education Cess 1 %)
    Cr     0000168227     300.00     Excise - PLA Depositable(S&H Education Cess 1 %)
    Cr     0000168227     300.00     Excise - PLA Depositable(S&H Education Cess 1 %)
    Cr     0000120030     9,265,433.62     Service Tax- Plant @ 10%
    Cr     0000120035     184,934.71     Service Tax- Plant -Ecess @ 2%
    Cr     0000120033     92,367.36     Service Tax- Plant -S&H Ed Cess @ 1%
    Please help me.
    With Regards,
    Manoj Singh

    Hi Manoj,
    Check settings in
    SPRO - Logistics general - Tax on Goods movements - India - Basic settings - India - Account Determination - Specify Excise Accounts per Excise Transaction
    (the duplication could come from here)
    and also check for GL assignments in next step
    Regds,
    Sany

  • J2IUN-Balance in transaction currency

    Dear all,
    After completing the process in J2IUN, while saving the following error is coming,"Balance in Transaction currency".
    Can anybody help me solve this issue?
    Will award good points.
    Thanks & Regards,
    A.Anandarajan.

    Hi
    Thanks a lot for your instant reply.  As you told there is a mismatch in the debit and credit. can you please tell in detail in which Excise transaction type it would be an error:
    this is the following entry:
    Dr   0013113906  27,136.06       Higher E.Cess payable          
    Dr   0013113900  2,713,474.00    CENVAT Payable                 
    Dr   0013113901  54,269.12       Ecess Payable                  
    Cr   0024820000  428,955.90      CENVAT Input BED               
    Cr   0024820002  9,598.59        Cenvat Ecess                   
    Cr   0024820004  44,670.53       E-Cess on PLA                  
    Cr   0024820004  44,670.53       E-Cess on PLA                  
    Cr   0024820004  44,670.53       E-Cess on PLA                  
    Cr   0024820005  3,197.72        H.Ed . Cess Input A/c          
    Cr   0024880000  2,284,518.10    PLA BED                        
    Cr   0024910002  23,938.34       H.Ed . Cess PLA   
    you can notice E-cess on PLA has come thrice and due to that 89,341.06 is coming more. That is the exact error. Can you please tell where should i do the modification?
    Thanks & Regards,
    A.Anandarajan

  • Balance in Transaction Currency error in J1IH

    hi experts,
    I'm doing transaction J1IH,under which i clicked 'other adj'.When i do the proceedings and at the end it gives me the following error 'Balance in Transaction Currency'.
    PLs help.
    Gaurav

    Hi
    You need to give the Cenvat on Hold account for accumulation of the balance 50% credit to be availed in the next financial year.This has to be given in the following path in config
    Logistics General - Tax on Goods movements - India - Account Determination - Specify GL Accounts per Excise Transaction and enter the Cenvat on Hold account against Excise transaction type DIEX for the excise group, company code combination.
    Reward points if found useful.
    Regards,
    K Lakshmanan

  • Balance in transaction currency error in J1iin

    Hi Gurus
    System is throwing an error while trying to create an excise invoice.
    FI/CO interface: Balance in transaction currency
    Message no. RW022
    Diagnosis
    The balances in transaction currency must be zero for each logical transaction when transferring to the FI/CO interface. A balance of "                   10.00" "INR" was determined for the logical transaction "".
    Any soutions??
    regards
    sidhu

    Go to IMG path Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction.
    There ensure that all Excise accounts are maintained for ECess and HECess.  At times, system will throw the error in case you have missed to maintain the required setting.
    Still if you have issue, apply the source code correction as detailed in the following note
    Note 845822 - Error "Balance In trnsaction currency" (F5 702) in j1iin
    G. Lakshmipathi

  • Balance in transaction currency  Error Message no. F5702

    Dear all  I need some help in order to make an invoice.
    When I try to  release to accounting for an invoice the system send me  the  following error.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'MXN' with the following details:
    Exchange rate '00', amount '         1.115,50-' and currency key 'MXN'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Please if anybody knows how fix this error  tell me.
    Thanks

    Dear,
    For this issue .. You have to use SAP NOTE..
    Check out bellow notes..
    Note 740565 - Balance in transaction currency w/ SCS document
    772955 - Part-inclusive rent
    753737 - RO from different BEs and one AP condition each
    737300 - Tax calculation for multilevel tax codes
    736210 - Tax account not determined correctly
    Please refer this thread,
    error : balance in transaction currency
    Regards,
    R.Brahmankar

  • Error in Billing ''Balance in Transaction Currency''

    Hi,
    While doing billing ''balance in transaction currency'' error is coming.
    Pls give me solution.
    Thanks,
    Padmaja

    Hi Purva,
    Which Tcode have you used - enjoy functionality FB70 or old screens like F-22?
    Regards
    Dwarak

  • CIN- Balance in transaction Currency

    Hi
    I have created Sales Order - Delivery - PGI - Billing (accounting document generated) & when creating the excise Invoice & when chosing the Utilization (Local) & saving it, the system is throwing an error "Balance in Transaction currency". 
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '            5,500' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application
    Kindly let me know where the settings need to be done for this.
    Thanks in advance
    Regards
    Aravind

    Dear Aravind
    Please make a search b4 posting any questions as this topic was discussed quite frequently.
    Check these threads
    [Balance in transaction currency  |Balance in transaction currency]
    [error in Balance in transaction currency |error in Balance in transaction currency]
    [Balance in Transaction Currency   |Balance in Transaction Currency]
    thanks
    G. Lakshmipathi

  • Balance in transaction currency - J2IUN - REG

    Hello,
    Iam getting an error "balance in transaction currency' in transaction J2IUN,  can someone tell me what would be the cause for this and how to handle this?
    Thanks & Regards,
    Kapoor

    Hi
    There could be multiple reasons for the same. They are listed in the order of chances of occurence:
    1. You have not defined the Transactions correctly for excise Transaction type UTLZ
    2. You have not selected the amount to be offset against the liability.
    3. In case your available credit is less than Liability, you have to first pass PLA entry.
    Regards
    Sanil Bhandari

Maybe you are looking for

  • How do you change the default font in Illustrator CS5?

    I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it wi

  • TextEdit multiple lines

    Hi, I am working on a requirment where i am using textEdit as a cell in tableView. Every thing is working fine except i am unable to capture the data from textEdit. I have to store the multiple lines entered by user into a z-table column of type XSTR

  • How to show all Stroke Panel options?

    Hey everyone! So I've been working on an architecture project and just transferred my project to Illustrator CS6 from Rhino. Basically what I need is to change certain lines to thinner, dashed, and different spacing. Now, I've used Illustrator multip

  • Error installing grip

    I tried to install grip, and this is what I get: # pacman -S grip error: cannot resolve dependencies for "gtk-doc":        "openjade" is not in the package set What could this mean? Searching the forums I saw a recent mention of grip working fine...

  • Formatted Search Forms

    Hi Guys, Thanks very much to John for the answer concerning the formatted Search Form. But I still have the problem that although the formatted Search has already been defined, the system is always asking if I would to define a new formatted Search,