J2ME costs for VM

I read in a german computer newspaper something about license costs for the KVM? Does anybody knows more about this?
Thanks

Hi,
you have to request a licence to distribute CLDC not MIDP.
Think also that in the future the MIDP support will be "standard" on a lot of devices so you will not distribute KVM but just Midlet.
Best regard :-)

Similar Messages

Specific Identification Cost for batch managed items (Follow-Up from P2P)

Specific Identification Cost method is used for serial and batch managed item. Using this method, the outbound cost of such items would be the original cost of specific goods, which can be determined according to the serial or batch number of that item.
Business One allows the user to receive batch managed items with a batch number that already exists in the DB. Its possible that the received quantity is added to on-hand quantity in the warehouse. In such case, the quantity on-hand of that batch and the received quantity may have different costs.
What should be the system behavior in such case:
1. Block receipts to the same batch with different costs.
2. Write the difference to a price difference account, as done in Standard Cost method.
3. Manage the batch cost with Moving Average method.
This thread is continuation from 'Specific Identification Cost for batch managed Items' <a href="http://p2p.sap.com/businessoneforum?type=join&login=1&uid=41FB661A76CED536C825C4E2B6FF4397&cid=91&go=z37225">discussion</a> in P2P SAP Business One Forum (Product Development Collaboration).
Previous discussion on P2P is summarized in the attached file.

Hi Peter,
This is a very important functionality that you are describing here. For example, in the Steel industry, it could be extremely useful to cost by batch or serial number.
If you receive a batch that already exists in the system and if the costing method for the product is moving average, then teh cost of the batch should be calculated based on the moving average as well.
If the costing method is standard, then the cost should go in a variance account.
If the costing method is FIFO, then it is a getting trickier...
Regards,
Vincent

Planned delivery cost for the scheduling agreement

Hi Experts
1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent. Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
Appreciate if you can suggest something in this case Urgently .
2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post. Please suggest if any alternate solution is available.
Regards
Arvind

Hi,
As you know if the delivery cost document is not posted during GR the
delivery cost is not proposed during invoice (MIRO). Planned delivery
cost will be proposed in invoice only when there are records in EKBZ
table. The EKBZ table will be updated when delivery cost is posted
during GR itself.
Please ensure in the PO itself thatr the conditions have been defined
properly with the relevant amounts and values.
During GR when planned delivery cost conditions are present in PO,
system checks for values in amount field. Then only appropriate
calculations will be done for delivery cost and planned delivery cost
document will posted during GR and hence updates EKBZ table.
Solution to this issue is described in below steps,
1) reverse the invoice document
2) reverse GR document.
3) You have to give values in amount field in relevant conditions ZGDS
   in the PO.
   If you face any issues changing the values, delete above conditions
   and put it again manually and give values in amount field also.
4) Post GR once again, delivery cost document will also be posted.
   You can check it in PO history.
5) During invoice select Item + planned delivery cost and post the
   invoice. If you need planned delivery cost to be posted separately,
   then you can post individual invoice for item and delivery cost.
Please note it is not possible to post delivery costs for documents with
multiple accountassignments.
For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
Best Regards,
Arminda Jack

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

My iPod 5 32bytes ios 8 no longer works and is out of warranty, how much money would it cost for me to exchange it to apple for a new one?

My iPod 5th generation iOS 8 32bytes is not bringing me to my home screen and is unresponsive, and gives me the constant apple logo each time I try to turn it on. My iPod is out of warranty, so I was wondering how much money would it cost for me to return my iPod back to Apple for a new one?

Apple does not have a trade-in program. You can either try and restore your iPod, or you can try and sell it yourself. In some locations, Apple does provide for a recycling program, but the amount provided for devices is quite low.

Reducing freight cost for undelivered material

Hi Experts,
Summary : The material supplier vendor needs to be paid for full quantity of material. The freight transport is allowed an under tolearance of 0.5% on the material to be supplied. If the delivered material quantity breaches the 0.5% under tolerance then amount at 1.5 times the cost of material for the shortage is to be deducted from the transporter. A dummy GR will have to be prepared for the undelivered quantity for which we do not want the freight cost to be loaded. The details scenario is mentioned below :-
We have to make a Purchase Order with material code say ABC for procured of some material. Suppose we make a Purchase Order for 100 nos. at a Unit Price of Say Rs. 10/- for Material Code ABC on say Vendor M/s XYZ. A freight condition is maintained in the Conditions Tab and suppose the Freight is Rs. 10 per unit of the material.
While preparing the Goods Receipt through MIGO, in the Freight Tab we select say freight vendor say M/s PQR against the freight condition and post the goods receipt.
While doing Invoice Processing in MIRO, when we enter the combination of Purchase Order and Planned Delivery Cost the system will populate the vendor codes of both the supplier of material and the transporter. On selecting the transporter the freight amount will populate against which the invoice of the tranporter can be processed.
In the Vendor Master of M/s XYZ GR-Based Invoice Verification is activated.
The vendor is allowed an under tolerance of 0.5% (i.e. the vendor should deliver at least 99.50 nos. of the Purchase Order). If the vendor delivers 99.50 or more then there will be no deduction in the freight charges.
But suppose the vendor delivers only 99.4 nos. of the quantity. Then we will prepare the GRIR for 99.4 nos.only. But while processing the MIRO we need to deduct 1.5 times the value of the material from the freight amount for the shortshipped quantity, i.e.
0.1 no (99.5 u2013 99.4) X Rs. 10/- * 1.5 = Rs. 1.5 are to be deducted from the final payment from the freight amount of the transporter.
The material supplier will have to be paid in full 100 nos. of quantity and will raise an invoice for 100 nos. A dummy GRIR for the 0.6 nos. of undelivered material will have to be prepared for processing the invoice for the 100 nos. of the material supplier and a dummy issue for 0.6 nos. of undelivered material will be prepared to remove them from the system.
Hence the freight cost for this 0.6 nos. of undelivered material will also go into the cost of the material and increase the MAP by that amount. Also the goods issue Cost will also have the effect of the freight cost.
We do not want to load the freight cost for the undelivered material in the value of the material.
Can any one please suggest a solution for the same.
Thanks in advance.
AJ.

answered

SAP allows release of Standard Cost for Material with Moving Average Price

Hi
We set our Raw Material to use Moving Average Price (V) and price determination 2 (single level). And we activated material ledger.
During mass calculation of standard cost (CK40N), If user accidentally forgot to restrict the Raw Material for being included in calculation, the system calculate standard cost anyway, even though I set it as Moving Average Price. And user is able to release it too without any problem.
Why the system does not restrict it? By giving error maybe. Although as for now I can not find the wrong effect from releasing standard cost for MAP material, by your experience, is there any side effect that I should be aware of?
Thanks

CK40n is mass release of all materials. The release is not dependent on price indicator of the material in the master. It will calculate standard cost of all the materials.
Releasing standard cost estimate of raw materials does not have any side effect as long your calculation is based on moving average price.
Regards
Divraj

How to get unit cost for finished goods in prod order

HI all,
IN a production order of type PP04, there is cost analysis you can get from CO03. This shows the cost for finished goods and BOM components. Would anyone know how the cost for finished goods are calculated ? The issue i have is that the unit cost of the finished goods is not correct. It is higher than what it should be. I looked at the moving avg price at material master but the cost used in calculation is different than in material master. Can anyone shed light how finished goods are calculated and why it is picking up a higher unit cost ? Where is the higher cost coming from for finished goods material as shown in CO03 ? The BOM materials are picking unit cost correctly. Would this have anything to do with cost settlement ?
thank you.
joyce

Hi,
Finished goods price will depend on BOM componenet price, activity price and overhead price. Check whether this prices are picking correctly or not.
Regards,
Sreekanth

Is the standard delivery cost for calendar in UK really £7.19?

Is the standard delivery cost for calendar in UK really £7.19? I want two different calendars, already designed, and think £14.38 is a ridiculous amount to pay for postage......help please!

The shipping prices for the UK are listed here: The prices are really that high:
http://store.apple.com/uk/help/print_products

Total Delivery Cost for partial Item delivery

Hi Guru,
I have a requirement wherein I have to apply the total delivery cost for partial Item delivery.
For example: Even if there is partial GR, delievery cost must be paid in full.
Say PO is for 100 PC and delivery cost is 100 EUR. Now at MIGO if the delivered quantity is 60, the freight vendor must still be paid 100 EUR.
Is this possible by configuration or do we need to make any changes at code level? If yes, Please guide me on how to do that....

Create a PO without tick GR-Bsd IV, suppose I have created PO with qty 20 and rate 1 INR and give freight 50 INR (Fixed Amount)..
Then I have done partial GR for qty 5. My freight amount booked as 12.5 INR (for partial GR)
Then I have gone for MIRO..
Here select Goos/Service item + Planned delivery cost.
Enter the PO, you can see two line items appear..
One for goods and one for freight...
Goods will come as qty 5 and amount 5 INR and Freight will come as qty 5 and amount 12.5 INR.
Just change the freight qty and amount as 20 and 50 INR.
Then post the MIRO, you can see your total freight will be booked to vendor..
Now again do GR for qty 2, at that time your freight amount will booked as 5 INR.
Then when you will go for MIRO, you can see only the GR item, Freight qty and amount will not come at the time MIRO..
(Note : I have told the scenario as per my previous screen shot)

Additional cost for finished goods

Hi all,
Here we are following fifo method valuation. we are using SAP B1 2007B PL 04.
I have a doubt how do we account the additional cost like Rent, Electricity etc.
and What G/L Account need to specify at determination level. Here we are determing G/L account with account groups.
I have a document for that but that doesnt give me clear picture of additional cost and
G/L accounts.
Kindly explain me in details with respectives to G/L Accounts
Regards
Shashi

Hi Shashi,
static costs should be included in a BOM as standard cost items. This will add to the item cost of the finished product.
Have a look at our Wiki here (Expert on Phone Newsletter April 2008):
[How to include labour cost in a BOM.|https://wiki.sdn.sap.com/wiki/display/B1/Howtoincludelabourcostina+BOM.]
You can substitute other costs for 'labour'.
All the best,
Kerstin

Delivery cost for Stcok transfer through M.type : 351

Hi Experts,
Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
Also kindly explain the steps involved in configuration of the same.
Thanks in advance,
Prabu

Hi,
Once the Config releated to Setup stock transfer order is done.
To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
Goto SPRO -MM-Purchasing -- Conditions
Here you need to assign the Schema determination RM2000 to your Purchasing organization.
Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
rgds
gsc

Report for the cost for replacing the defective goods free of cost

hi guru's,
iam having the qury that iwant to create a report for the free of cost .For the senario that company wants the report for replacing the defective goods free of cost .pls help me out .IN SD module
Edited by: joe mm on May 13, 2008 3:35 PM

Dear joe
I am sure, for giving free of cost, you should be having different document types like sale order for free goods, billing with no value. So thru VF05, by selecting the billing document type, you can generate a report.
thanks
G. Lakshmipathi

Cost for a Batch

Hi,
How can i view the cost for a Batch in OPM.
We have a form in descrete manufacturing as WIP Value summary to view the cost for a Job.
is there any form in OPM 11.5.10.2?

Hi
There is no specific form available in OPM to view the cost of a Batch.
But there are two types of Costs can perform the batch cost, one is Standard costing and Average costing. To know the cost of batch we need to perform few steps then you can see the results of the batch cost.
If you want furhter more details on how to perform step to get cost of the batch, I could share with you.
Regards
Raj
Sierra

Any FM to calculate planned costs for a Maintenance plan

Hi all,
Is there any FM to calculate planned costs for an Maintenance plan.
I can use report RISTRA30(IP31). but i need to use for multiple multiple Mplans and different time frames. using SUBMIT to this report and getting data will lead to performance in my actual report.
Please do provide any FM's or any other pointers for the same.
warm regards,
Sumanth

Dear,
In maintenance plan you can speciefy - order type,task list type,task list group & counter.
when system automatically create service/maintenance order then system will determine plan cost, but for this you have to maintain planned price by t-code KP26.
And then you can see report by IP31
REGARDS,
Kapil
Edited by: Kapildev Farakte on Nov 17, 2009 10:38 AM

J2ME costs for VM

Similar Messages

Maybe you are looking for