J2RE Making Windows Flip Out Scrambling Screen

Using Dell GX270 Machines Update Java to latest version. Everything seems to work fine. But when Launching Java in Web pages on occasion the whole screen Scrambles. tool bars on top of screen. windows flickering Machine Locking up etc.. sometimes you can Alt+F4 the application if you are lucky. Mostly you just have to reboot the machine..
After reading through posts I think these Machines have ATI Video cards. Do I need to upgrade the Drivers? or Someone had posted turning off Video Acceleration inside of Java but dont seem to see that option in the control Panel under Java Plugin. Do I put something in the java Runtime Paramaters section under advanced? This happends sporaticly on several machines. Any suggestions would be appreciated. Thanks.

http://onesearch.sun.com/search/onesearch/index.jsp?charset=utf-8&qt=GX270&rf=0&rt=1&nh=10&cs=0&y=9&x=8&col=developer-forums

Similar Messages

Some JPG windows & iWeb workspace window greyed out over screen sharing

Just purchased a Mac mini running Snow Leopard v10.6.1. After attaching this mini on my LAN, I have set it up as a "server" on my network (ie. no keyboard/mouse/monitor attached), and access it only via Screen Sharing. The machine (an MBAir) I usually access this new mini from runs Leopard v10.5.8.
After setting the mini up this way, I have noticed some windows in Preview and iWeb come up as a greyed out windows. The files open normally, and applications seem to function normally. They just do not display any of the graphics. Some other PDFs I have on that server-mini open up fine. When I attach a keyboard/mouse/monitor, they all display properly once again.
I have reset the PRAM, fiddled with the color/display preferences of the applications and system, and searched through this forum for similar issues, but I have found none. I am thinking it is an issue between Leopard and Snow Leopard, but before I upgrade one of my other machines to check the screen sharing (and possibly opening up more issues), I thought I would post here to see if anyone has any advice prior to my next step.
Muchas gracias in advance!
~Ted.

I have only used screen sharing with a third party vnc viewer such as http://www.jinx.de/JollysFastVNC.html
If you find a solution with the Apple software you could give this a try.
regards

Blue Screen of Death on install of j2re-1_4_2_04-windows-i586-p.exe

Immediately upon installing j2re-1_4_2_04-windows-i586-p.exe, I get the "blue screen of death" on Windows 2000, indicating memory dump. Applications do not work subsequently that use j2re. Attempts to modify in reinstallation indicate errors in Windows installer. Don't know what to do.

Immediately upon installing
j2re-1_4_2_04-windows-i586-p.exe, I get the "blue
screen of death" on Windows 2000This is the usual symptom of a video driver problem.
Make sure you have all the latest service packs for Win2K installed, and for good measure, visit your graphics card vendor's site and get the latest drivers from there.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

My macbook pro out of screen when i switch from windows to mac

my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

When tryed to run diagnostic test windows blacked out then blue screen ipad will not turn on now

when I ran a diaganostic test windows blacked out and then the "blue screen of death"........and now my ipad will not turn on ......has anyone had this problem ?...if so...what now

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Resizing window out of screen

hello,
I can't see my window top bar ..... is out of screen ....
so I can't resize it...
What Can I do?

Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.

Help! Screen keeps flipping out!

My screen keeps flipping out and scrolling by itself or clicking on things while I'm trying to scroll. It also spazzes out when I zoom. This has been happening for about a week every now and then. I try turning off my phone and turning it back on but it doesn't help sometimes. What do I do?

Hello Paulinaav,
Thank you for providing the details of the issue you are experiencing with your iPhone.
I recommend following these steps for an issue like this (you can skip 4 because it does not relate to the issue you are experiencing and any other steps you may have taken):
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPhone before performing the restore:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

What should I do if my iPhone 4S screen is flipping out and going grey than coming back and I have to restart it 3 times before it comes back to work? I can barely put pressure on the screen.

My iPhone 4S flips out when I put pressure on any part of the phone and turns colors and then goes gray with white lines both horizontally and vertically. How do I fix this and how much is it going to cost?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...

A brand new W540 and the Ultra Dock humms, black out external screen, won't recognize mouse and some

Just received a W540 and an Ultra Dock. Here is my first impressions.
During setup ... tried to connect my speakers directly onto the laptop.... HUMMMMM! (really loud humming sound, until Windows loads ...sounds like a short somewhere ...). Ok, obviously sound is not the main focus of W540.
After a little while... boink! ... and the external screen goes black accompanied with the "Windows detected something disconnect"-sound. No matter what I clicked on the keyboard, or how much a moved the mouse, the external screen wouldn't turn on again. I had to flip up the screen on the laptop, and tada, Windows reported that something connected again, and the external screen turned on again. Turns out that I need to keep the laptop screen open at all times now, and now and then both screens disconnect and connect again. Not completely a showstopper, but somewhat annoying. Ok, how to fix - enter "lenovo ultra dock black screen" in Google and see that a bunch of people have experienced the same thing. After some reading, I found this official support page "LENOVO THINKPAD PRO DOCK AND THINKPAD ULTRA DOCK ARE CAUSING DISPLAY ISSUES ON EXTERNAL MONITORS" (http://support.lenovo.com/us/en/documents/ht081248). Seems to fit my situation perfectly. Just download the fwdphb03.exe program and follow the instructions. But does fwdphb03.exe even start?!? NO!
Just a brief flicker and no application nor instructions to follow. In addition, I am Administrator on my machine. Please make applications that at least attempt to work....
I have an Aten mouse and keyboard switch (KVM) (CS-1784 to be precise), which have been working seamlessly for years on all other machines I have (VMWare images with different Windows versions, Raspberry Pi and Mac). Connecting the KVM with it's mouse and keyboard renders a working keyboard and a dead mouse (remember - switching to one of the other machines renders working keyboard and mouse instantly).... <rant on>pheeew, starting to get a bad feeling here. OBVIOUSLY we have a lot of cool hardware like USB 3 and DisplayPort and what not, but WHAT DOES THAT MATTER, when the Lenovo folks can't program this stuff properly?</rant off>
The W540 comes with a lot of Lenovo software. Much of it is really good and useful. But what happened when you try to log in to Windows? For some reason Lenovo want to inform you that the Num Lock is on when you see the standard login screen. The message something like "Num Lock is on - your password may be entered incorrectly". All in some black background, covering OVER the login field in Windows !!!! Hey, the laptop has a numeric keyboard, I don't need this message. Luckily others again have experience the same thing. At this page http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T540p-numlock-warning-at-login/td-p/142... I get the tip that I need to rename the tpnumlk.exe to something else. Gone was the stupid message.
My advice to Lenovo - don't include stuff that harvest a lot of complaints and that obviously is going to annoy your customers. Even if the machine was one with a small keyboard and no separate numeric keyboard, I would NEVER EVER want to have some ugly black box covering over the standard login field… I can’t even imagine that the developer of this tool, use it (nor like it)! That is exactly why bloatware gets its reputation.
I would of course understand all this if I were talking about cheap machines and some wacko docking station. But I am not.... This is state-of-the-art, 2014, expensive-style laptop from the same manufacturer.
PS! At the end of this session, Lenovo tells me that there is a problem with the powersystem, and that it want to reduce power to sustainable levels....

can you connect the device in _*recovery mode*_ ?
JGG

Scrambled Screen from a virus?

I just want to report a possible virus attack. I'm skeptical that this could be the problem, but ever since the antivirus scan, the problem has been eliminated. Here's how it all happened:
On Wednesday night:
1. I woke the computer up from sleep mode and the screen was completely scrambled. I was able to move the mouse, but I wasn't able to control any functions and could not move any windows.
2. I did a hard shutdown by holding down the power button.
3. restarted and cleared the PRAM. during startup, the Apple symbol was scrambled, but the login screen was not.
4. I restarted again and reset the SMC. The same symptoms were there. So, I entered the desktop and everything looked fine. But then when I woke from sleep mode, the screen was scrambled.
5. I inserted the Snow Leopard installer disk and ran the disk utility. It found major problems and was able to fix them.
6. I restarted the computer and everything was starting up perfectly. I entered the desktop and after a few minutes the screen began to flash repeatedly and then went back to a scrambled screen. This symptom did not come from exiting from sleep mode.
7. I ran the Snow Leopard installer disk utility again and found no problems with the hard drive.
8. I ran a hardware test (AHT) with one of the disks that came with my MacBook Pro to rule out hardware problems. Everything passed the test.
9. My next question was. Could this be a trojan virus? The symptoms just seemed to point at this. I restarted and while the screen was clear, I went into apple.com and found a freeware antivirus app called SOPHOS.
10. I ran a scan and while it was scanning the problem happened again. I did a reboot, ran the antivirus app and found that it successfully quarantined 5 trojans. 4 of which were in my User-Library-Mail directory and one in my Downloads directory. I checked and the trojans were listed as Windows OS viruses. I eliminated these threats and now I no longer have this scrambled screen problem. Could this have been a virus attack?
Today, when I look back through the console.app and under the Diagnostics and Usage Messages, I found that around the time of the last incident I had a error that reads:
Configd(15) Sleep: Platform Failure Panic - AC 99
com.apple.message.domain: com.apple.powermangement.sleep
com.apple.message.signature: Platform Failure panic
com.apple.message.result: Failure
com.apple.message.uuid: 77F88BFE-0307-4C6A-A356-CB7D9B32CF42

I found the solution to this problem.
I first went to this link http://support.apple.com/kb/TS2377
I could see on this page exactly what I was experiencing. It was a problem with my NVIDIA video card as mentioned in that apple document.
I took my computer to an Apple store, the Genius ran a scan and found nothing wrong. I showed a print-out of the above support document to the Genius and he said that it wasn't a real document and just for customer information. I couldn't believe what I was hearing from this man and he refused to watch a video that I took on my iPod Touch of my Mac Book Pro screen showing the artifacts of scattered pixels on the screen.
That same day, I took my computer to an apple certified service shop for a 2nd opinion. That guy then ran the same exact scan and then my computer completely shut down during the scan, it could not be restarted and he was not able to see the results of the video card test. He contacted Apple support and they said to send it to them in Texas. They completely replaced the video card along with the logic board since both boards are connected together. All this done free of charge. The problem has been fixed, no more artifacts on the screen as described in the above support link.
I think the Genius at the Apple store needs to get his head examined.

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

How to print a message in the Window created out of a Frame Object

Hello,
I created a class extended from Thread class
I want to print a message in Run method : in the Window created out of a Frame Object in the main function.
I used System.out.println function, but nothing is printed on the screen
what other function can I use, without using Drawstring method in ie public void paint(Graphics g)Thank you

Erm...I don't know whether this is acceptable or not, but...if you want to create out of the main frame, why dun u you create a new frame with a button there, so it seems like a pop-up windows (***or like JOptionPane.showMessageDialog)
P.F.Boy

Error when calling a popup window in the initial screen of an application

Hi,
    I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
Sam

Hi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'WINDOW_NAME'
*                    title                  =
*                    close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
*                    close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_okcancel
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram

HT3775 I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDI

I cannot get itunes to work/install on myPC. I am running windows 8 in a 64 bit machine. I also want to purchase books via itunes for my Nook. Are you deliberately excluding PC owners so we cannot use ituens on our computers???? I have selected a community but have no idea what community I should be working with. Can somone explai these communities to me? Also. you don't allow much time to go thru the sign up process. I had to start over SEVERAL times as you kept timing me out. Jesus...when people are signing up for the first time, we have no idea of the questions that will be asked. Give us a break and give us time to sign up. Not everone is disability free and able to go thru your process quickly...you are NOT user friendly. You should be for people who are wanting to join your community. I used to want an Apple product but now that I have had first hand experience with your web page, I think I will probably stay away from Apple products. VERY DISAPPOINTING

Jan 11, 2014 10:26 AM Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING
Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING PC'S in response to Birdlover1
Post over in the iTunes for Windows forum, here:
https://discussions.apple.com/community/itunes/itunes_for_windows
sebastian

J2RE Making Windows Flip Out Scrambling Screen

Similar Messages

Maybe you are looking for