J4540 crumples paper from the input tray

Was working fine. Just won't feed paper right, skews it to one side, stops the printer, says out of paper. Have cleaned everything, done all it says in HP, in solutions, in forums, checked everything. Can anyone help?

I had the same problem I raised up the lid where you access the printer cartilages, to the front is a metal bar, there is a screw on each side take it out. You will find about ten tiny wheels that feed the paper, one of my wheels had slipped off and was laying beneath the bar. It just snapped back on now the feeder works like new

Similar Messages

Printer won't load photo paper from the photo tray

My HP C7280 won't load the 4x6 photo paper from the photo tray. The photo tray moves in towards the feeder, but fails to actually load the paper into the feeder. Any suggestions on how to correct it? Thank you.
Mike
This question was solved.
View Solution.

Hey,
Please take some time and look through this document to make sure that you are loading the paper properly,
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lc=e...
These are the Macintosh instructions but the steps to prepare the photo print are the same but they are steps you would do on Windows just ignore the instructions.
Have a great day. Get back to me.
I worked for HP.

Paper from different input trays

Hi,
Is it possible to have a document that prints the first page on paper in input tray 1 and the rest on paper from input tray 2 ?
I've looked into the PrintedOutputOptionsSpec object, but there's nothing about input trays there ...
Kind regards,
Yves Vindevogel

IF you know about the device bring printed to, and what to look for in the PDF, you could write a custom plugin that would send the necessary commands to the device. Many people have done just that over the years...

How can I persuade my MX715 that I mean what I say: paper normally to come from the rear tray.

Yesterday, my printer decided that it would rather be fed from the cassette. I had changed nothing and since then have re-iterated umpteen times that I want it to take paper from the rear tray, both on paper source settings and properties. I use too many different types of paper and sizes to make the cassette realistic.
Help please
ggoss

Is the software owned by the company or the employee? The software should have been registered under a company Adobe ID and not an employee. It sounds like that serial number is now associated with the employee's own Adobe account and not the company so essentially she owns that serial number. Your company doesn't sound too efficient when purchasing and managing their own software.
Your IT department should have had control of all software and ID's. Have you checked with them to see if they have access to that account? Is it possible the employee took the software with her when she left then installed it on her own computer? That might be why your serial number no longer works.
Adobe's tech support stinks especially if you ask a question outside of their knowledge and what they have on a script. They may as well have monkeys answering the phone. Actually monkeys are easier to understand than the reps are.
Maybe somebody else will come along with a better resolution. You should return the upgrade of CS6 and may have to either get the CC version or re-purchase the full-price CS6 while it is still available.

Pixma mx 922 will not print a pic from the lower tray. Cannot put 8x10 paper in upper tray.

I cannot print a picture using the paper in the lower tray and cannot make 8x10 paper fit in the upper tray. Is this normal for this printer. I should have stayed with a HP printer. I am using an iPad 2.

Actually both wireless problems are mentioned frequently on the web, by many people. I was finally able to figure a solution out because there were so many threads to choose from when you Google it...never had problems with any other wireless equipment connecting in all of the years we have used them, just this printer...As I said, a fan of Canon in all forms for years. Just not this printer. Regret giving up the MX850. Have gained nothing with this printer, techinically or print quality wise.. Feels like a step back, actually. And many others have mentioned how agonizingly long it takes to fire up to print or when you change settings. It is a major complaint with this printer. As to the Airprint info of the 4"x6" only printing, I was not aware of that. Maybe if printer manufacturers put that info in their sales material in the section dealing with Airprint, we would be able to manage expectations better....

Hp ENVY 5660 won't feed from the 4x6 tray!

Just set up the new wireless printer and all communications are working well, but.....when attempting to print 4x6 photo's, it won't select the 4x6 photo paper tray. Both the regular paper and the 4x6 photo paper trays are filled, but not over full.When we set printer preferences, we set 4x4, paper type, etc..but aren't seeing any other options. It will print 4x6 on a full sheet of paper all day, but not feed from the 4x6 tray. Please help! We don't feel like we are device illiterate, but this one has us stumped!

Hi @burly1, and welcome to the HP Forums! I understand you're having issues with your tray selection. I'd like to help! I would recommend running a copy throught the printer, but select copy - photo tray. Do you have any issues printing a photocopy on photo paper? I'd also suggest performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar. I'd then suggest downloading and running the HP Print and Scan Doctor. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

Why do I get a dent in the paper in the photo tray. I have 6280 all-in-one photosmart? not print

I have a 6280 all-in-one printer and it will not pick up the photo papar from the photo tray. It has a message that says load paper glossy side down. I have paper in there. when I examine the photo paper it has a dent in the end that is inserted first. Please help and thank you.

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

Capture value from the input field

Hello All,
 I'm new to BSP.
I have a small querry.
I have a input field.
beside this a push button.
if i enter a value in the input field and press the push button, i need to capture the value from the input field and pass it to a variable contained in a class.
i'm attaching the layout code here.
but i'm not knowing what to write in the event(on input processing)
Layout code 
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title = "Page to take the value from the screen and pass to the class "
 marginBottom = "100"
 marginLeft = "250"
 marginRight = "100"
 marginTop = "100"
 scrolling = " AUTO" >
 <htmlb:form>
 <htmlb:tray id = "tray1"
 hasMargin = "TRUE"
 title = "Value Capture"
 width = "350" >
 <htmlb:textView text = "Enter a value"
 design = "emphasized"
 textColor = "negative" >
 </htmlb:textView>
 
 <htmlb:inputField alignment = "left"
 id = "gv_var"
 required = "true"
 type = "STRING"
 design = "standard" />
 <htmlb:button design = "emphasized"
 id = "button"
 text = "SUBMIT"
 onClick = "btn_click" />
 
 </htmlb:tray>
 </htmlb:form>
</htmlb:page>
</htmlb:content>
eventhandleron input processing code
DATA: event TYPE REF TO if_htmlb_data.
event = CL_HTMLB_MANAGER=>get_event_ex( request ).
IF event->EVENT_NAME = 'button' AND event->EVENT_TYPE = 'click'.
 ENDIF.

HI BSPian,
 htmlb:inputField value = "<%= v_value %>"
 id = "gv_var"
 required = "true"
 size = "10"
 type = "STRING"
 maxlength = "10"
 design = "standard" />
Here u mean to say that v_value must be one more field type string. is it so ?
But i want to see the value in the same input field
id ="gv_var". i.e if i enter the value "BSPian" in the input field and press "submit" the internal processing will be done as told by u and after that ,on the screen i want to keep that value till i end that session.
i passed a variable v_value in the inputfield value but it's not working ..
regards,
deepu.

Running a forms application from the system tray

I have a forms application.I want to run it from the system tray ,just like how norton antivirus or yahoo messenger works .How do i do it .Pls help

You can create Actice EXE or OCX that enables your application to hide in system tray and embed it in your Forms6i Application.

My printer has stop printing from the photo tray. I need to place the photo stock in the main tray

I've a HP PhotoSmart Plus printer B210a. The printer will no longer print from the photo tray. I'm still able to get prints; but I must place the photo stock in the main tray. It becomes a problem, because I sometimes forget the photo stock is the main tray and I waste photo stock when I do my regular printing and only get part it because the photo was still in the tray. Anyway to fix this?

Hi there wmcook,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and are there any errors when attempting to print from the photo tray?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

SIMBL Error when opening Safari from the desk tray

I get a SIMBL Error when I open Safari from the desk tray. The error reads:
SIMBL Error: Safari 3.0.4 version 523.12 has not been tested with plugin PCB (null) (v19).
Any idea on the origin of this error? I have recently turned on parental controls -- could that have anything to do with the PCB plugin? Where do I see a list of installed Safari plugins?

The PCB error is related to a Parental Control Bar plug-in which is incompatible with the recently updated Safari
http://www.parentalcontrolbar.org/
To eliminate the error, ...
"This is probably installed under Macintosh HD > Library > Application Support > SIMBL > Plugins > PCB.bundle. If you simply remove this, Safari should be happy. (If you installed it somewhere else, then just use Spotlight to find PCB.bundle.)" Taken from Apple Discussion Board, Topic : Safari 3.0.4: Plugin-not-loaded alert window
I have not re-installed the plug-in so cannot comment as to whether it is updated for Safari 3.04. Otherwise, error disappeared.

It won't pick the paper in the main tray

My printer will not pick up the paper in the main tray. It keeps saying I'm out of paper.

Hi kappadee,
I found this video on HP's YouTube channel, HP Printer Support.
Try following these steps to see if your paper pick up issues are resolved!
http://youtu.be/YHYLTnslQR0
Let me know if this works for you.
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

Acquiring a waveform from the input channel

Hi, while I am trying to acquire teh waveform from the input channel,
it is not showing up in Labview "waveform graph", but the same
waveform is seen on the oscilloscope. I am using NI PCI 6052-E DAQ
board.

Greetings Amu,
How have you configured the PCI-6025E? Is it configured for
differential readings or single-ended readings?
By default, the configuration of the device will be differential,
which means that two input channels are used for every input signal.
When configured in differential mode, you need to connect the positive
terminal of the signal to channel X and the negative terminal of the
signal to channel X+8. For reading a differential signal from channel
0, you will connect the positive terminal of the signal to channel 0
(pin 68) and the negative terminal of the signal to channel 8 (pin
34).
I would suggest to use the Measurement and Automation Explorer (MAX)
software to test the signal before going to LabVIEW. Open MAX and go
to the devices and i
nterfaces folder. The PCI-6052E should be located
in this folder. Right-click on the PCI-6052E and select test panels
and you will be able to test the input signal here. You can change
the mode to continuous and set an sampling rate in the test panels as
well.
Once you can view the signal in the test panel of MAX then I would
suggest to move to LabVIEW. Search for the shipping example entitled
'Cont Acq&Chart (buffered) VI' which is a continuous analog input
example. Select the device number, channel number, and scan rate and
run the VI.
For more information on connecting your signals to the PCI-6052E I
would suggest to refer to chapter 4 of the user manual. I've linked
it below for your reference.
NI 6052E User Manual
http://digital.ni.com/manuals.nsf/webAdvsearch/552436964E347DAF86256BDE00670E9B?OpenDocument&vid=niwc&node=132100_US
I hope this helps.
Let me know if you have any additional questions regarding this issue.
Regards,
Todd D.
NI Applications Engineer

HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

Using osx mavericks on macbook pro. My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Have MF8580Cdw. Brand new. Cannot get it to take paper from manual feed tray

I have a new MF8580Cdw. Still learning how to operate. So far, I cannot get it to take paper (labels, etc) from the manual feed tray. Solutions?

Hi EHC.
I will be glad to assist you.
Please follow the steps below to turn on the tray and change the paper settings for labels:
1. Press (Select Paper/Settings).
2. Scroll to [Paper Settings], and then press [OK].
3. Scroll to [Multi-purpose Tray], and then press [OK].
4. Scroll to [ON], and then press [OK].
5. Scroll to [Paper Settings], and then press [OK].
6. Scroll to [Multi-purpose Tray], and then press [OK].
7. Scroll to [Set Details], and then press [OK].
8. Scroll to [LTR], and then press [OK].
9. Scroll to [Labels], and then press [OK].
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

J4540 crumples paper from the input tray

Similar Messages

Maybe you are looking for