J6450 dropping wireless connection with Vista

OMG!
I purchased an HP touchsmart desktop with Vista and an HPJ6450 All in one printer hoping that having all HP would solve a lot of compatibility issues.
Well that stupid printer seemed to have a mind of it's own as to when it was connected. REALLY ANNOYING!
I scoured the net looking for the answer and apparently I was not the only one to have the issue.
I think I found the answer and I'm all but 100% sure this is it.
Vista power settings!
Yes!
Vista apparently defaults wireless adaptors to use as little power as possible so it shuts them off whenever possible...like when you enter standby...or don't use it for awhile etc.
To prove it, I knew if I shut Vista down I would lose my connection
So I chose the "Low power setting", shut down and restarted, checked my connection and it was GOOD.
I tried it a couple times, switching it back and forth and that was it!!!
So here's what to do:
Start menu > Control panel > Power options > Recommended settings > Change plan settings > Change advanced power settings > Wireless adaptor settings > Power setting mode > Setting > Select "Low power saving".
Update: 24 hrs later still no connection issues. Comes out of standby with immediate connection, on reboot or restart it appears to be the last thing to connect so it might take a minute or two.
Bonus tip: I think this also stopped the stupid "Host processor error" from popping up, because I haven't seen it since I did this.

Hi mvoltage
Do you have any appliances with motors or other mobil telephone devices setup near the iMac?
Both motor flux fields and Cordless Phone Base Stations can and will interfere with the operation of the iMac's wifi and airport signals.
Dennis

Similar Messages

Dropping wireless connection with Apple Wireless Keyboard

I've got a new bluetooth chip in my iMac from support at my location, a new wireless keyboard and I'm still having issues. Wireless connection dropped 6 times typing this one sentence. Aaargh. I've been busy with this ever since I bought the computer. On irregular intervals (absolutely no regularity whatsoever) the computer loses connection with my Apple Wireless Keyboard. So if I have a new iMac, with a new bluetooth chip and a new keyboard how come this issue is still an issue? It's driving me mad. And possibly the guys at the centre as well.

Hi mvoltage
Do you have any appliances with motors or other mobil telephone devices setup near the iMac?
Both motor flux fields and Cordless Phone Base Stations can and will interfere with the operation of the iMac's wifi and airport signals.
Dennis

Anyone dropping wireless connection with ML?, Anyone dropping wireless connection with ML?

I keep dropping wireless never had a problem before yesterday's update

Hi mvoltage
Do you have any appliances with motors or other mobil telephone devices setup near the iMac?
Both motor flux fields and Cordless Phone Base Stations can and will interfere with the operation of the iMac's wifi and airport signals.
Dennis

Intermittent dropped wireless connection with E4200

Bought an E4200 to replace my Netwgear router and am experiencing the following problem.
One of my wireless boxes serves as mu mail server. I've been running this configuration for years so the only thing that has changed is the router.
The neworkd is up and all wireless clients can connect, but after some time, access to the mail server just 'freezes'. I say freezes as the nework icon (i'm using ubuntu' still show a connection. In addtion, there are not error in any of the logs. I just seems that the mail server and the router just stopped communication.
Any idea what I should be doing next? As I said the only thing that has changed is the router.

I would suggest you to try upgrading the Router’s firmware. Here is the link for upgrading the firmware of the Router: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a68b3a0c05f441f290600a2054f81e29_4272.xml&pid=80&r... . After upgrading the Router’s firmware, reset the Router. Steps to reset the router:
Push the reset button on Router for 30 seconds, turn off the Router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
Power cycle it and re-configure the router from scratch. Then check the connectivity status.

Macbook dropping wireless connection with Airport in Leopard?

What exactly is this about? I heard about this with Leopard but am not sure if I'm experiencing it. What are the symptoms (how often and for how long) and how can I tell if mine is subject to it? I have a 2.0 C2D macbook (mid-07) with a fresh install of leopard (10.5.1). I hear it's gonna be fixed in 10.5.2.
What's this all about? Thanks.

bump

E3200 - Dropping wireless connection on the Mac

Pros: Gig Eth switch, no front-facing indicator lights, familiar web interface...
Cons: WiFi Protected Setup doesn't belong. Continually drops wireless connections to my Mac Book Pro (but none of my other devices), which worked just fine on the E3000 this unit replaced and works perfectly on other WiFi networks. REALLY SLOW web interface - average time to move from one page to the next is something north of 9 seconds. Again, never a problem with the E3000 that this unit replaced. Price? I wouldn't complain about price if this thing actually worked as expected.
Other Thoughts: I'm hoping it's just a flaky/defective unit and not indicative of the overall quality of newer Linksys products. Firmware isn't the issue - it's running the latest one from Linksys' site.

First of all please verify that you have got a 802.11n card in your computer. New generation routers (i.e. E3200) speaks an entirely different language with 802.11g cards, so while those adapters can work with the E3200, but they are not optimized to provide good performance. It is like having to translate from one language to another in real time when going from N to G.
Well, there are few things you should keep in mind with regards to N routers:
1) For the best possible speeds, you need to be using WPA2-AES as your security mode. Any other security mode will see your speed/range capped.
Any G devices in your wireless network will tend to hamper the performance of your overall network.
Ensure that your router is running the latest firmware from homesupport.cisco.com The new firmware includes performance enhancements and fixes.
The router by default uses a channel setting of auto, which means that it would keep switching channels depending on the interference. I’d recommend you set it to a fixed channel. Usually, 1, 3, 6 and 9 give you the best performance depending on your environment of course. I’d suggest you try different channels, observing each for a while, to see which gives you the best performance. You can follow the link here on how to change channels.

Intermittent Wireless Connection, Dropping Wireless Connection

I am asking this in hopes of finding at least some way to diagnose my problem and hopefully eventually solving it. My wireless connection currently drops at varying amounts of time. Sometimes I can go 20mins others merely 5mins. The Airport reads that I am still connected and have a strong connection but when I try to navigate to a page with the browser (either firefox or safari) it merely times out after trying to load the page for up to a few minutes. I have changed the channel and frequency of my router (first router I tried was a Trendnet TEW-432BRP) and I have no cordless phones or other possible wireless obstructions. (I do have a very very infrequently used microwave but being that it's on the other side of the house and I can be sitting next to the router I doubt this is the culprit)
Then I tried changing routers to a Belkin N1 Vision router. Same issues. Additionaly worth noting all other PC's and linux machines on my network (about 4-5 other computers) all work just fine with out dropping their connections (with both routers).
Then I brought my original machine (a white macbook less than a year old) into the apple store, thinking at this point it was a hardware problem with my machine. They the replaced the airport card twice and the logicboard once. Eventually decideing that they should just replace the whole machine. Now with my new unibody I thought I had finally illeviated the problem but now I am having the same issues with an intermittent connection again.
If I turn off the Airport card and turn it back on again usually it will reconnect and allow me to browse again. But not always. The odd part is that generally when using another program that accesses the net the connection does not seem to be interrupted (such as with bit torrent). Very odd.
Anyway I tried using my computer at a friends house with the same trendnet router (his router but same model) and still the connection issues persist. Any ideas on what I can do or try to at least even begin to understand why this is happening would be helpful. I want very much to get to the bottom of this. Thanks for your help.

You didn't get the Apple Store to replace a white MacBook with a unibody?!
Anyhow - the connection problems could easily relate to an incompatibility between OS X and the router in question. Or it could simply be a setting on the router that isn't working well. To assist in the diagnosis... can you please supply:
1) The security mode of the router? (WEP or WPA/WPA2 and AES or TKIP).
2) The network mode (G/N)?
3) The signal strength as reported by Airport (RSSI)
You can get most of this information (all except the security mode) by holding the option key down whilst clicking on the Airport icon in Finder. For the security setting you can go to your routers configuration screen (or you can get it from the command line).
Cheers,
Rodney

WRT54G keeps dropping wireless connections

Wired connection to the router works fine. But it drops all the wireless devices (PC, phone, tablet) multiple times each day, sometimes only 30-60 minutes after reconnecting. Power cycling the router "fixes" the router and allows reconnection. There are 2 topics in the FAQ section that looked helpful:
Getting poor or no signal from a wireless router
Top causes of dropping wireless connection on a Linksys router
but clicking on those does not bring up anything. Anyone know where to find those 2 FAQs? Any other ideas for what might be causing this?

Hi. You may need to do firmware upgrade on your router as is the case these days for legacy routers. What is the hardware version by the way? You can find it at the bottom of the router right after the tiny print of the model. Access homesupport.cisco.com and search for the model. When you get the router's page click downloads below support sections and from there you have to select the hardware version, once you do that you will see the firmware version for the said hardware version. Usually it is a bin file when you save it and you can open that one on the router's page. Once you access your router's page go to Administration and click Firmware Upgrade and select the file you downloaded from the website. Make sure that you do this upgrade with a computer plugged-in to the router. When upgrade is done, you do a 30-second reset and unplug/replug the router also for 30 seconds. You may refer to this link http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4030.
As for the link for Getting poor or no signal from a wireless router, I found this one from Cisco's public kb site but not able to for the other one but I believe they are related.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
Try to change channels as well on your router: you can try 1,3,6,9. Make sure the router is placed at least 3 feet above ground and check the antenna as well if it is still okay.

WRT330N Dropping Wireless Connections

I have a WRT330N which I have been using for a while with a couple of wired connections and 3 wireless connections.
It has been working great for months, but has suddenly started dropping wireless connections. I basically haven't touch the thing since I set it up and it has worked flawlessly.
Any idea why it would suddenly start behaving this way? Nothing else about the environment has changed either.
Could it be dying?
BTW, it will drop connections with a system literally sitting right next to it.. so distance isn't an issue.

Try to upgrade the firmware of the router .
And also do not use any electronic devices in the range of router .

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

Lost wireless connection with mx860

i lost my wireless connection with my mx860 - please help, i have tried it all
thank you

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

Photosmart 7250 keeps dropping wireless connection have to reset daily

photosmart 7250 keeps dropping wireless connection have to reset daily

Hello PMW1023.
I understand your Photosmart 7520 doesn't maintain wireless capabilities. Please follow this entire HP document on Printer Does Not Maintain Wireless Connection.
Please inform me your troubleshooting steps.
Looking forward to hear from you.
I worked on behalf of HP.

HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

Hello ebulloc,
It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
AirPort base stations: About AirPort base station status lights (LED)
http://support.apple.com/kb/ht4600
Flashing amber
Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
This article should lead you to a resolution:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Thank you for using Apple Support Communities.
Take care,
Sterling

Zyxel pk500z router/wireless modem loses wireless connectivity with imac

My iMac loses wireless connectivity with wirelss internet from my Qwest ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

WRK54G dropping wireless connections

Hi,
I have a WRK54 firmware Version 1.56.01
It keeps dropping wireless connections and can't get back on, requires restarting (power) the router to allow wireless working again.
I have set the MTU to 1300
Doesn't allow me to update the firmware, error "Upgrade action is not finish!! Upgrade file pattern error."
Using Windows XP SP2
Any ideas?
Regards,
Sercan

Are you trying to Upgrade the firmware on your Router from your Wireless Computer? If yes, then you can Hardwired your computer to the Router using an Ethernet Cable and then try to upgrade the firmware of your Router....
If still you are Unable to upgrade the firmware on your Router, then you need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable..... Now you can try to upgrade the firmware on your Router.

J6450 dropping wireless connection with Vista

Similar Messages

Maybe you are looking for