J6480 wireless and network help please!

I have an officejet J6480 that has an error in printing system when printing wireless. Everything is configured correctly and my printer reads the router and connects. If this problem cannot be fixed, can i use an ethernet connection directly from printer to router and get it to work. I tried this but also got a failure to print message. Please help asap! Thank you

hello,
first, cancel the print jobs
then try to restart the print spooler of the computer (click start>run... then type services.msc)
look for print spooler in the list
right click on the print spooler and click restart
if that doesnt work, then do a partial reset on the printer
unplug the power cord from the back of the printer without pressing the on button
press and hold # and 3 and wait for 10 seconds
plug the power cord back
wait for the printer screen to lit up then release the # and 3
try to ping the printer
try to print a test page again
keep me informed..

Similar Messages

Adobe Programs: Conflicts and Networking help please

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

Routes, gateways, and networks -- Help Please

Hi Linux gurus:
I have a problem that I know you will help me resolve...
I have two network cards in my Linux box.
1. public network:
10/100
192.168.1.102
default gw: 192.168.1.1
netmask: 255.255.255.0
I want this one routed to my router for internet/public use
2. private network 1000mpbs
192.168.2.181
default gw: none
netmask: 255.255.255.0
I don't want this one routed at all. It is used for backups, moving files, etc and is called by individual servers using /etc/hosts.
Now problem is that I can't get out and/or in to the box. It appears as though the default gateway on this system is 192.168.2.254. I set up the network via the gui and it appeared to be working, but alas it is not. It looks like things are only talking via the 192.168.2.X network, and that is not what I want...and from the outside world, nothing at all is talking to it.
Below is my ifconfig -a and my netstat -rn
Please help!
eth0 Link encap:Ethernet HWaddr 00:18:F3:E8:29:2A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:193 Base address:0x8000
eth1 Link encap:Ethernet HWaddr 00:90:27:AC:7C:4D
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5339 errors:0 dropped:0 overruns:0 frame:0
TX packets:1891 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:588251 (574.4 KiB) TX bytes:530473 (518.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0F:B5:43:16:D0
inet addr:192.168.2.181 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:300106 errors:0 dropped:0 overruns:0 frame:0
TX packets:617831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28009736 (26.7 MiB) TX bytes:585354764 (558.2 MiB)
Interrupt:217 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:816528 errors:0 dropped:0 overruns:0 frame:0
TX packets:816528 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102034952 (97.3 MiB) TX bytes:102034952 (97.3 MiB)
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth2

Ok...I did the following:
route add default gw 192.168.1.1 eth1
route delete default gw 192.168.2.254 eth2
I am able to get out to the outside world and it seems to work fine, but just curious:
1. How do I keep this from reverting again? (I could put this in my own script, but would rather not hack it, but do it right)
2. Are my routing tables below correct now (it works I understand, but want to ensure it is done correctly).
3. What is this route for (in the below table) and is it needed?
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
4. Since i'm relying on /etc/hosts files for the systems on the 192.168.2.X interface should there even be a route for this subnet?
updated routing table:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

Wireless and network printing transcript for Meet the Experts

On March 16th, HP hosted its first online chat event on wireless and network printing. Below is a transcript of that session.
I am in the process of planning the next chat event. I would love to hear what topics would interest you, what day of the week and time is best for you, and if you think an hour is too long.
So, if you get a minute, please let me know.
Here's the transcript:
SiobhanF-HP: Welcome! Cameron, Craig, David, and Jim are ready to tackle your questions.
SiobhanF-HP: Just to remind you if you want to ask a question, you must be a member of the HP Support Forums. If you want to join, go here https://passport2.hp.com/hppcf/createuser.do
nc256: Do I need a wireless router to hook up my wireless printer?
CameronL-HP: No, but most people will want to do it this way. You can use a feature called an ad hoc connection to avoid using a router, but it is only covered under an older standard that is slower and less secure. Also, without something to route traffic between the local network and the internet, you cannot get an internet connection. Using a wireless router makes setting up a wireless network easier, and it will generally make the network work better too.
jest1: I've seen some hardware in stores for a "print server" hardware device that attaches to a network. Is this something that I need in order to run a printer over a network?
CraigB--HP: Not if you have a printer that has a network connection built in. Many models of HP computers are ready to be connected directly to your wired or wireless network.
katiepage: How can I print when I am using a VPN?
DavidH-HP: VPN connections generally hide the rest of your home network to increase the security of the VPN connection. A printer on the network isn’t a security threat but the VPN doesn’t know that. It just hides everything just to be sure. That means that when a VPN is active you need some way to connect to the printer other than your home network. Bluetooth, USB, and even printing to a thumb drive and plugging that into the printer are all ways of getting your print job to the printer that don’t go through your home network.
SiobhanF-HP: If you have specific product questions, the more information you give us the better we will be able to help you. Getting your exact model number; any error messages; a description of your wireless network including what kind of security you have, what wireless-devices are connected to your network, and your IP address will go a long way to helping us answer your question.
MelissaP: Why would I want a wireless printer?
CraigB--HP: The main advantage of a wireless printer is the ability to place the printer somewhere in your home or office even if this is not near your router or computer.
Deltan: What is the maximum distance I can have between my router and my printer?
CameronL-HP: It does depend on your environment. Without interference about 25 feet. Walls and floors and other objects can reduce this. The types of walls are important. For example, mirrors and outdoor walls will greatly reduce the indoor range.
jest1: Is there a preferred wireless router type or brand for wireless printing compatibility? We are using a Linksys 802.11g router in my home.
JimB-HP: In general, any wireless-router from a name brand manufacturer that has been Wi-Fi certified is compatible with our printers (look for the Wi-Fi logo). We use Linksys in our lab with great success.
nc256: Are there any digital cameras that can send directly to an HP wireless printer for photo printing?
DavidH-HP: Many printers support a feature called Pictbridge. If the camera and printer both supports this feature, the camera can be plugged directly into the printer to print photos. Or are you asking about printing over a network connection?
KevinW: I keep hearing that you shouldn’t use default settings for a network. Why?
CraigB--HP: There are three reasons not use default settings: First, wireless-routers do not have any wireless security enabled by default. Second, you will be using a common network name in which case you may connect accidentally to your neighbor’s network. Third, your wireless-router is accessible by inadvertent guests who may change the configuration of your wireless-router without your knowledge or use your internet connection without your permission.
Bodie08: I have an HP Lan attached printer and Windows XP on my home network. Is there a known setting (Firewall/port/other) or patch to address the issue of hpqtra08.exe hanging on Windows XP Shutdown? A number of us in the forum have identified this issue. Thanks!
DavidH-HP: This problem has been seen in the past but there were attempts to address it. Have you checked to see if there is a later release of software available on the web? (hp.com)
ZhuLee3: How old is wireless printing technology? I noticed all the experts have around 20 years of experience with it, was there wireless 20 years ago?
JimB-HP: Wireless printing first appeared with the introduction of the 802.11 standard in late 1990's. HP has been making wireless printers since 2003.
lpeterson123: What makes wireless so flaky at times?
CameronL-HP: There are lots of reasons. Wireless signals are affected by distance, walls, metal objects, and other wireless devices like cordless phones. However, most of the problems seem to be from how the network or how security software is configured, and these can also cause things to fail only occasionally or in certain situations. Having a good wireless connection between a PC and printer involves several hardware devices and lots of software made by different companies that all have to work together; if something is not quite right in any of these things then the whole solution looks flaky.
Bowman16: I use a Mac, are there any features that would not work if I was to set it up for wireless use
DavidH-HP: All the features will work on a Mac if you install the full HP software solution.
jest1: Thanks for the answer on the router question. The next question, then, is to ask what would be a recommended consumer-grade wireless-enabled printer (or series) just so I can start my research.
JimB-HP: Any of our Photosmart or Officejet wireless printers will work with Wi-Fi certified wireless-routers. Our price points really have more to do with how much printing you do. In general, our more expensive printers cost less per page than our less expensive models.
Bodie08: Why would I choose "spooling" on my PC over "direct connect”?
CraigB--HP: In general, spooling allows you to use your program sooner than printing directly.
ZhuLee3: Jim: What is it like to be an "HP Printing Expert"? What kind of stuff do you get to work on, on a day to day basis?
JimB-HP: I really like my job -- I've always been a radio enthusiast so working on 802.11 technology is really a dream job for me. I'm also fortunate to work with a great team here in Vancouver, WA. More importantly, I like designing equipment that people use in their everyday lives.
TEACHER1: Recently I changed routers, now I am unable to print wirelessly, even though the SES and wireless network light are steady on my Deskjet 6980 printer. What is the solution? Thanks.
DavidH-HP: The wireless light indicates that the radio is on but does not indicate that the printer is connected to the network. First check that the printer is connected to the network by printing a network configuration page from the printer.
AgentRed: I get my internet with a Verizon wireless broadband card. Someone told me that wouldn't work with a wireless printer. Is that true?
CameronL-HP: Our wireless printers use the 802.11 b, g or n standard which is not compatible with the wireless cellular standard. It would be like trying to connect to a wireless network using Bluetooth. They are different wireless technologies.
DavidH-HP: Regarding the Verizon card, it is true that you cannot connect the printer over the Verizon connection, but as long as your laptop has Wife you can print to the printer over WiFi at the same time that the Verizon connection is active. This should not be a problem.
jest1: Is there a "minimum" internet connection that is recommended for wireless printing? We live a bit far from the DSL CO so our connection is sometimes flaky. I would guess that incoming speed shouldn't affect my local wireless LAN but I want to ask it anyway
CameronL-HP: There are 2 parts to your home network. 1 is your wireless router which manages your local network equipment, then your network connection to the world wide web which your DSL provider gives you. The connection speed of your local network is not affected by your internet connection speed.
Bowman16: Are any HP printers 802.11n? I do not want to add an 802.11b,g to my network and cause it to slow down.
JimB-HP: Currently, our printers comply with the 802.11g standard. We are investigation the emerging 802.11n standard.
ZhuLee3: Will there be a transcript of all the questions and answers from this chat available for viewing after the session? I think I missed some questions at the start.
SiobhanF-HP: The chat event begins when you joined. Sorry that you can't see what was said before you joined. I hope to have transcript posted tomorrow or on Wednesday at the latest.
nc256: Where is the future of printers headed? Does HP have any interesting plans with printing technology? And what’s your opinion on whether or not color laser printing will ever approachthe photo realism of ink jet color?
JimB-HP: The future of HP printing will be characterized by wireless connectivity to not only computers but to mobile internet devices. In fact, as mobile devices become smaller (think phone or netbooks), the need to print from your mobile device might become more relevant.
jest1: Am I able to print from my iphone to a wireless printer?
CraigB--HP: You can print photos from your iPhone to HP wireless printers and it works great in my experience. Go to http://www.hp.com/go/iprintphoto to get the details.
TEACHER1: Thank you. I printed a page. It shows that wireless is disconnected.
DavidH-HP: Then you just need to input the wireless settings from your new router into the printer. If your printer does not let you input the settings from the front panel, you can use the CD that came with the printer or downloaded from hp.com to configure the printer again ( look for the option to "add a device" ).
ZhuLee3: Question about security... if I get a wireless printer, what’s to prevent other people within range of my printer, from adding it and printing documents? How is this configured on the actual printer?
JimB-HP: The simplest way to secure your printer is to enable WPA-PSK security for your wireless network and to use a security pass-phrase that is at least 12 characters long. This configuration is very safe from intruders for the foreseeable future.
CameronL-HP: It' is also a good idea to use a unique network name, also called an SSID.
carolj: I have a photosmart C7180 and I have it hooked up to my laptop (windows vista) when the setup completed the printer was put in networking instead of printers and I cannot access it or move it out of there. What do you suggest?
CraigB--HP: You might need to uninstall and reinstall. Before doing this, make sure your get the latest driver from the HP support at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153754&lc=en&cc=us&dlc=en&lang=en&cc=us This is also where you can get a copy of the instruction book.
wizll: Hi, I haven't done much research in wireless printing, but I'm interested as I currently have my printer set up the old fashioned way where it's connected to a networked PC, but if the PC is off I can no longer print, which is obviously inconvenient. Do hp wireless printers have a web gui you can connect to once it's on the home network, or is it simply all done from the printer's interface. I've seen some old wired network printers that only use the printer's ui and that seems like a clunky use.
DavidH-HP: Yes, the HP printers which have networking built-in have what we call an "embedded" web server which allow you to configure settings, check status, and have many other features; on some models you can even scan using the embedded web server.
nc256: Jim: Will color laser printing ever reach ink jet quality for photos?
JimB-HP: While never is a long time, inkjet printers will, for the near future, output higher quality photos.
katiepage: If I'm at home, connected to my office network via VPN, can I access my office networked printers?
CraigB--HP: Yes, when you are connected to the office VPN, you can print to your office printers. However, you will not be able to print to your home networked printers while you are connected to the VPN.
jest1: If a friend comes over to my house with their laptop and needs to print something, are they able to do this just by authenticating with my wireless LAN (assuming I have a wireless printer set up)?
CraigB--HP: In addition to authenticating to your network, you friend will also need to install the printer driver for your printer.
jpszambelan: Is there a wireless USB device of some kind I can connect to my printer if there is no network connection already built in?
JimB-HP: HP sells an accessory that adds Wi-Fi capability to your USB printer (see http://www.shopping.hp.com/product/printer/inkjet/wireless/4/accessories/Q6236A%2523A2L) Also, many higher-end wireless-routers allows USB printers to be connected to them to allow sharing of the printer from the network. Note that this solution often limits you to just printing and not scanning from the network.
rockwoodchev: It seems that my computer can find my printer, but my printer can't find the computer, so that "Scan to computer" won't work. What do I need to do in order to fix that?
DavidH-HP: This can be blocked by security software running on the PC (such as a personal firewall). Make sure that your firewall is configured to allow communication on your local network. You can also unblock specific ports, but the easiest way is often just to allow communication on the local home network. The specific setting varies from firewall to firewall.
SiobhanF-HP: We are nearing the end of our chat session. We only have time for 3 more questions. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
SSPatrick: Is it possible to print wirelessly to the same HP printer using both a PC and a Mac?
JimB-HP: Yes -- I do this in my home. I have both Macs and PCs on my network without any trouble.
Bowman16: Any plans to do this again?
SiobhanF-HP: Yes we are.
ZhuLee3: Do all of the experts hang out on the HP community? Will we see you posting there after this?
DavidH-HP: Oh yes, whenever time permits. In addition to trying to help people, I learn things too.
JimB-HP: I'm known as Wi-Fi-Guy on the support forums. I hang out there often helping where I can. It helps me be a better designer.
CraigB--HP: I monitor the forums looking for problems to take back to the development lab for investigation. To date, I have only posted one reply.
CameronL-HP: I haven't been involved in the past but expect to be more involved in the future.
SiobhanF-HP: We only have time for one more question. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
ZhuLee3: Thanks for setting this up!
SiobhanF-HP: The transcript will be posted on http://h30434.www3.hp.com/psg/board?board.id=Networking
TEACHER1: Thank you all for conducting this session !!!!
jest1: Is there an OS limitation to print wirelessly?
JimB-HP: All the OS versions supported by the printer as supported wirelessly. In general, we are compatible with Macs, Windows and Linux.
SiobhanF-HP: We are ending the chat event. Thank you for coming. We hope you found it worthwhile. I will be posting a transcript of the event in the Networking and Wireless board in the Printers and All-in-Ones forum. We will be hosting future Meet the Experts chat sessions on a variety of topics, so please tell us what you thought of the event and how it could be improved. http://h30434.www3.hp.com/psg/board/message?board.id=Feedback&thread.id=525
Live Forum Closed
Message Edited by timhsu on 03-18-2009 05:39 PM
Message Edited by timhsu on 03-18-2009 05:43 PM
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

I expected this to be released quite earlier. But now that it's in process, I'll wait patiently.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

HP proudly announces the first "Meet the Experts" on line chat event: "Wireless and Network Printing 101"

Greetings!
See details of the upcoming Meet the Experts on line chat event
Topic: Meet the Experts: Wireless and Network Printing 101
click below link for more details!
March 16 chat event
Looking forward to seeing you there!
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Meet the Experts transcript can now be found here
Meet the experts transcript
Thanks & regards,
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Droid Razr M Kitkat 4.4.2 Update Removes All Wireless and Network Connectivity

For 2 days a screen has been popping up on my phone urging me to download and install Android 4.4.2 Kitkat. What could go wrong, I asked myself? Oh, brother!
Before: Android Jellybean has been chugging along contentedly on my phone for nearly a year. I love my phone. It has served me very well. I get a clear and full-strength signal from anywhere in my home using my personal router, and get a signal matching in quality to the strength and distance of Wi-Fi routers when I am out and about. (I previously had an HTC Desire with US Cellular and could NOT get a clear signal of 4 bars except very rarely. Usually I got 1 or no bars. Caveat: I live out in the country.) My Verizon Droid gets 4G network 5 X 5 almost always out here. Let's just say I've been very satisfied.
After: Android Kitkat is installed. Yay! Oh, phone. Why you no work no more? It's really simple. I have no wireless connection, even though the router is working perfectly and this is proved by the fact that my wife is online in the next room with her computer. I also have no 4G connection. I have no 3G connection. I HAVE NO CONNECTION! I have a brick which I can't even play my games on because they can't connect with the game servers.
So, first, thank you, Verizon, for sending out a product that has clearly not been properly tested. A casual look at the forums and other websites will show that this problem isn't peculiar to my phone. It's all over the country.
Second, please patch this pronto! My phone is dead! Dead to me, I say! Unless I have internet connections and the ability to make and receive phone calls, I will have to consider throwing in the Verizon towel and finding a competitor who can actually roll out a successful update.
All the best!
PRK

I fixed it! By myself! Me! Single-handedly! OK, I fixed it by accident after trying every thing that I saw mentioned on these forums regarding the update problems. What worked? No clue. I did: 3 soft resets; 3 switching on and off wireless; 5 forgetting and re-discovering my router and re-entering all the password key info; turned it off and left it off for 2 hours; changed/toggled every state of every wireless and data connection switch 5 times.
I'm not sure which of these worked. After turning it off and turning it back on after all the above attempts, I had signals. Wireless and 4G. Who knows why. So, dear Verizon, I take back the mean things I said. I'm sure you were trying as hard as you could in a stressful situation. Neither of us was at our best. Let's just agree to let it go and move on. OK? OK?

How to install Laserjet M1217 for both wireless and network

How to install an HP Laserjet Pro M1217nfw MFP on an XP system for both network and wireless capabilities?

Hi,
Are you talking about a mixture of wired and wireless ? If yes, please check your existing hardware and use the following manual to select one connection type then post back if having any porblem during the setup:
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mail and password: Help please!!!

I have changed my password and on my iPhone and iPad there is no problem. However, on my iMac, 10.8.2 every time I put the computer to sleep and then wake it up again Mail tells me to verify my password. I press OK but it refuses to accept and I am forced to go to System Preferences, then mail where I press OK for the same password and the whole thing then works.
In Yahoo it works perfectly!
What is happening in Mail. I have deleted the account in preferences and set it up again but all to no avail.
Help please!!!

You might try the following steps:
Restart the device by holding down the on/off button until the power down slider appears.
Try entering your password in another location (i.e. when you are using a different wifi network)
Reset all settings (settings > general > reset), this resets some of your settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It does not remove any of your data.
Try signing out of iCloud and back in (only if find my phone is disabled)
If this doesn’t help your best option may be to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

T60 -- Bad Wireless connection. Help please!

Hi Guys, my T60 has unstable wireless connection problem. I make sure the radio is "ON". It gets connected to the DSL network but it gets disconnected on and off ( the radio turns off by itself sometimes). Something wrong with my Intel PRO Wireless driver 3945abg? Can anyone guide me how to fix the problem??
Thank you!!
-meLittlebee

Hi there,
I'm having the exact same problem - installed the OS (Windows XP Pro) adding SP3 and updating all drivers.
Then I connect to the wireless whitout any problems. I go to sleep, and next day wireless don't work!
The Machine is a T60 2008-WGV. I have made a image of the clean disk with Clonezilla, and therefore I can restore the OS quickly to a working wireless, but I find it quite anoing to have a clean OS every morning, in order to use network.
anyone please?
Message Edited by denbert on 05-03-2009 09:47 AM

Adobe Programs: Conflicts and Networking help!!

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

HT4587 I can't locate airport express icon in itunes to connect my remote speakers wirelessly, can anyone help please?

Can anyone help please? I am trying to connect my remote speakers to my i-tunes library using Airport Express. Everything is connected and working using mt OS device (Ipod Touch 5th Generation) that works fine. I have tuned on home sharing and it says in itunes preferences that I am paired but according to the light on the airport express base station I am not connected to my existing wi-fi network. I cannot find the itune airplay icon anywhere in itunes nor can I find the network link by hovering my pointer of the network connections as suggested in the instructions that came with airport express. Would apprecaite some help please you can give. - thank you.

hmmmmm.
i'm not trying to get rid of you here, but it might be worth also checking-in/reposting over at the Airport for Windows forum. when Airtunes things get sticky, i generally defer to iFelix or RJ in WI, and they spend a lot more time over there than they do here.
(traffic is so heavy in here at the moment that this thread might be buried out of sight before an AirTunes guru gets to see you.)
here's a link through to the Airport for Windows forum:
Airport for Windows

JSP and Servlet - help please

Hello,
I am making this feedback for fun and a bit of learning too. I have an INDEX.JSP page, where the user selects the very first option. Depending upon the selected option he is moved another page PRODUCTFEEDBACK.JSP (so far I have completed this). Here as usual there are many fields to be filled in. As a spams protection i have done this;
I have a AdditionClass, which is a seperate class where two number are generated at random. This numbers are called by PRODUCTFEEDBACK.JSP. The user is then asked to perform the addition. The completed form is then sent to ProductFeedback servlet.
When I compile my PRODUCTFEEDBACK.JSP I get this error. Can you please tell whats wrong?
PRODUCTFEEDBACK.JSP
      *<td>Please help us to prevent Spams by performing this simple mathematical Calculation. We appreciate your effort </td>*
    *</tr>*
*</table>*
*<jsp:useBean id = "AddTest" class = "go.AdditionClass" />*
*<table width="53%" border="0" align="center">*
    *<tr>*
      *<td><div align="center">*
*<input name="textfield8" type="text" size="3" value ="<jsp:getProperty name="AddTest" property = "randNum1" />">*
* + *
*<input name="textfield9" type="text" size="3" value="<jsp:getProperty name="AddTest" property = "randNum2" />">*
* = *
*<input name="_total" type="text" size="5">*
      </div></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
</table>
<br>
<table width="37%" height="23" border="0" align="center">
    <tr>
      <td width="33%"> </td>
      <td width="67%"><input type="submit" name="Submit" value="Click here to send us this form"></td>
AdditionalClass.java
* To change this template, choose Tools | Templates
* and open the template in the editor.
package go;
import java.util.Random;
* @author MAC
public class AdditionClass {
    Random generator = new Random();
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void SetNum1(){
        randNum1 = generator.nextInt(10); // Generate First Random Number
    public int getNum1(){
        return randNum1; //Return First Random Number
    public void SetNum2(){
        randNum2 = generator.nextInt(10); // Generate Second Random Number
    public int getNum2(){
        return randNum2; // Return Second Random Number
    // send the Random Numbers to ProductFeedback class
    public void productFeedbackRandNum1(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(randNum1);
    public void productFeedbackRandomNum2(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(randNum1);
}Erros that I am getting:
org.apache.jasper.JasperException: Cannot find any information on property 'randNum1' in a bean of type 'go.AdditionClass'
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:462: The following error occurred while executing this line:
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:440: Java returned: 1
BUILD FAILED (total time: 1 second)

Thank you for replying. I modified my Bean class then what is posted above, so thought to repost the code again and seek help. There seems to be no error now but it just dont generate any random numbers, All i get very time is 0. I am wondering, is my code generating 0 as random number, every time :-)
package go;
import java.util.Random;
public class AdditionBean {
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void generateRandomNum1(){
        Random generator = new Random();
        int num1 = generator.nextInt(10);
        SetRandNum1(num1);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(num1);
    } // End of generaeRandomNum1
    public void generateRandomNum2(){
        Random generator = new Random();
        generator = new Random();
        int num2 = generator.nextInt(10);
        SetRandNum2(num2);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(num2);
    } // End of generateRandomNum2
    public void SetRandNum1(int num1){
        randNum1 = num1;
    public int getRandNum1(){
        return randNum1; //Return First Random Number
    public void SetRandNum2(int num2){
        randNum2 = num2;
    public int getRandNum2(){
        return randNum2; // Return Second Random Number
}// End of classThank you,

After effects and photoshop ,,,help please

hi all
can anybody help please.
ive been making a short film with my son and putting some basic effects in, just for a laugh.
i noticed an effect on ADOBE TV that was done by Gareth Edwards in his movie MONSTERS which i thought would be good to try out in my film but i carnt get it right,,
here is the link to that effect... http://tv.adobe.com/watch/customer-stories-video-film-and-audio/monsters/
its the effect where he changes the menu board in a cafe to one of his infected area signs, he allso changes a few other signs.
in the video he say that he exports a still frame from after effects into photoshop and puts on his image {with a few tweaks her and there}, when hes got it ok in photoshop ,it some how updates in after effects??
can any please help ,thank you

It's a simplified explanation of the process. He left out explanations of motion tracking and perspective matching that were most certainly required for the shot being discussed.
If you are doing the same process to a static, locked off shot, with no foreground objects passing in front of your sign, it would be very possible to create a single frame in Photoshop and just layer it over your scene in AE. But once the camera moves, you will need to understand Motion Tracking. If objects pass in front of the replaced component, you will need to understand Masking.

Home networking help please

My new iPod has lead me to quickly fill the hard drive on my laptop. I've looked at the options for how to address this and have decided a wireless home network is the answer. I think all I need is an old PC (c. P3 1GHz) with a big hard drive and a wireless card and a bit of time to set it up.
I've never considered this before and it will definitely be stretching my technical skills, but I'm ready to learn. Can anyone recommend a good guide as to how to get started and just what I need to do? I seem to be able to buy what I think is a suitable spec tower PC for c. £100 and a new 250gb hard drive for £90. Am I being naive thinking it's this straight forward?

Why not simply get a USB or FireWire removable drive?
Gonna be a zillion times easier. Simply plug it in.
No need to have to mess with another computer, OS problems, networking problems, wireless cards, etc.
100 quid for 300 GB.
eBay UK External HArd Drives

My iPod touch has no sound from music and videos help please

My iPod touch has no sound at all, help please guys.

- The restore from backup
- If still problem restore to factory defaults/new iPod.
- Last, make an appointment at the Genius Bar of an Apple store.

J6480 wireless and network help please!

Similar Messages

Maybe you are looking for