J9 MIDP2 on Dell AXIM x51v

I am trying to run J2ME program on Dell AXIM x51v (on Windows Mobile 5.0)
currently, we tried to use IBM J9 (CLDC1.1/MIDP20) .
I am not able to run a Midlet if it tries to have access to file (read or write).
For example I installed SUN J2ME Wireless ToolKit.
The example PDAPDemo is not running...is there a special configuration for file access?
The same for io access (serial port).
Can anyone help?
Thanks.

Hello,
did you try to access local files or remote ones?
Regards,
Thibaut de Sany. (http://thibaut.desany.eu)
J2SE - J2ME - J2EE certified.

Similar Messages

Connecting/syncing Dell Axim x51v to MacBook

Does anyone know how to sync/connect a Dell Axim that's running Windows Mobile v5.0 to a MacBook that's running Leopeard? I tried doing this with Bluetooth and USB via an application called "The Missing Sync" from MarkSpace and neither of them seem to work. Please help with this if anyone knows how to do it.

I don't think the problem is with Markspace, I think its with the Dell Axim x51v. When I connect the Dell Axim x51v to the MacBook via USB, the MacBook does not even recognize it. When try to connect via Bluetooth, I can create a partnership between the 2, but I cannot transfer files from the Axim to the MacBook even though I have all the intricate settings correct.
Has anyone out there been successful in syncing a Dell Axim x51v to their MacBook?

WRT150N to Dell Axim X51V windows mobile 5

Hello, Purchased new Linksys WRT150N. My desktop, my vonage, Dell laptop, and Dell Axim x51v all connected and showing up on my Linksys Easylink Advisor. Everything is working great EXCEPT for Axim handheld running windows mobile 5. According to the Axim's WLAN Utility wireless is on, 150N is connected, signal is good, green bars on front page are up, BUT when I try to access internet I get "Page not found". This is day 3, please help!!
Navchief

Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Open the setup page of router using 192.168.1.1 then put in the password as admin...all you need to do is do the wireless settings such as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
Also,the advanced wireless settings to Beacon Interval=50,Frag thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet Requests & it will definately work!!!

Bluetooth connection problems with Dell Axim x51v

I have a Dell Axim x51v and it has Windows Mobile v5.0 on it. I am trying to connect the Axim to my MacBook via Bluetooth, but am experiencing the problem where the devices get paired, but are not connected. Infact, when I add the device, they get connected for about 10 seconds, then they disconnect and remain this way. I do have my MacBook firewall turned off and I enabled Bluetooth sharing. Can anyone help with this?

Does anyone know how to sync a Dell Axim that's running Windows Mobile v5.0 to a MacBook that's running Leopeard? I tried doing this with Bluetooth and USB via an application called "The Missing Sync" from MarkSpace and neither of them seem to work. Please help with this if anyone knows how to do it.

Directory Structure / Shortcut string... Dell Axim (Pocket PC 2002)

Hi all,
I've been experimenting with Jeode on the Dell Axim- I'm particularly interested in running an application from the "Built-In Storage" folder, which persists even with main battery, and the backup battery removed.
If I run the application from a folder located in the "My Device" root as follows:
/myApp/mpApp.jar
/myApp/mpAppLauncher.lnk
with the content of the shortcut set to:
18#"\windows\evm.exe" -Djeode.evm.console.local.keep=TRUE -cp /myApp/myApp.jar myPackage.MyClass
- it executes perfectly.
However, if I wish to locate the application and data in the "Built-In Storage" folder, I run into problems, apparently because of the character space in the folder name, which, even when replaced with a "%20"
18#"\windows\evm.exe" -Djeode.evm.console.local.keep=TRUE -cp /Built-In%20Storage/myApp/myApp.jar myPackage.MyClass
I get a ClassNotFoundError.. has anyone got any advice?
thanks,
Fergus.

Do you know how to copy files from your pocket pc to the desktop
using Windows Filesystem.
I've tried to read a file like this
FileInputStream fis = new FileInputStream("\\PCNAME\SHARED_FOLDER\FILE.EXT");
But If the PCNAME is the PC that has the CRADLE, I always get a System MEssage
telling me as if i was trying to access that shared folder on the pocket pc...
so i guess i can only do that over the network but on other pcs.
Is there a way to copy files to the PC with ActiveSync without having to write
Client/Server Apps on both PCs and Pocket PCs? or is there a place where activesync
protocol is explained, since i believe activesync is a client/server app on both ends
that we could reuse to copy files from and to the Pocket PC and PC

Which Jeode for Dell Axim

www.handango.com shows 2 Jeode products that I think might work on my Dell Axim. Do I go with 02/20/03 Pocket PC 2002 Jeode ("newer is better") or 11/27/02 Dell Axim X5 Jeode ("better because it targets my Dell Axim")? Does "Dell Axim Jeode" provide Axim-specific advantages over the other (newer) product?
esmertec Jeode Java Virtual Machine for Dell Axim X5
PersonalJava 1.2-compatible; designed to support PocketPC2002 11/27/02 NA Downloadable $49.95
esmertec Jeode Java Virtual Machine for Microsoft Pocket PC 2002
Personal Java 1.2 compatible; designed to work with most popular Pocket PC devices 02/20/03 -- NA Downloadable $49.95

I purchased the "esmertec Jeode Java Virtual Machine for Dell Axim X5" at the Handango site (allowing me to download the file jeodeforpocketpc_bld1131.exe shown below). FWIW, I used winzip on the original file, extracting the other files shown below. When I ran the original exe file, it employed MS ActiveSync to deploy Jeode to my Dell Axim. If anyone who has purchased the "esmertec Jeode Java Virtual Machine for Microsoft Pocket PC 2002" would care to post a similar listing for that product, I would appreciate the opportunity to compare the two to see if they are actually identical.
C:\esmertec_jeode_axim>dir /o:gd/s
Volume in drive C has no label.
Volume Serial Number is 1057-D99B
Directory of C:\esmertec_jeode_axim
07/26/2003 07:26 AM <DIR> Disk1
07/26/2003 07:26 AM <DIR> ..
07/26/2003 07:26 AM <DIR> Disk2
07/26/2003 07:26 AM <DIR> .
07/15/2003 08:07 PM 5,188,691 jeodeforpocketpc_bld1131.exe
1 File(s) 5,188,691 bytes
Directory of C:\esmertec_jeode_axim\Disk1
07/26/2003 07:26 AM <DIR> ..
07/26/2003 07:26 AM <DIR> .
10/05/2000 04:00 PM 54,272 Setup.exe
10/05/2000 04:01 PM 339,565 ikernel.ex_
10/20/2002 01:38 AM 496,136 setup.bmp
10/20/2002 01:38 AM 786 contents.txt
10/20/2002 10:05 AM 126,298 setup.inx
10/20/2002 10:05 AM 94 Setup.ini
10/20/2002 10:05 AM 1,537,281 data1.cab
10/20/2002 10:05 AM 13,895 data1.hdr
10/20/2002 10:05 AM 490 layout.bin
10/20/2002 10:05 AM 3,080,155 data2.cab
10 File(s) 5,648,972 bytes
Directory of C:\esmertec_jeode_axim\Disk2
07/26/2003 07:26 AM <DIR> ..
07/26/2003 07:26 AM <DIR> .
10/20/2002 01:38 AM 767 contents.txt
1 File(s) 767 bytes
Total Files Listed:
12 File(s) 10,838,430 bytes
8 Dir(s) 8,906,633,216 bytes free
C:\esmertec_jeode_axim>

LVBtw not found on PDA Dell Axim X51

Aloha!
I am developing software to communicate with a portable instrument. The software runs on a PDA, and I am using LabView for PDA (8.01). I currently have 3 diffferent PDAs for testing purposes:
- Dell Axim X30 with windows mobile 2003 2nd edition
- Dell Axim X51 with windows mobile 5.0
- HP iPAQ hx2490b with windows mobile 5.0
My program communicates with the instrument over a bluetooth connection. I now have the following behavior on the 3 different PDAs:
- HP iPAQ: everything works
- Dell Axim X30: program starts, communicates with the instrument, crashes (earlier versions of the program still run though, I must have done something that this specific PDA doesn't like)
- Dell Axim X51: when I want to start the program, a dialog pops up telling my that this program is not digitally signed and do I really want to continue? If I tell windows to continue, I get the error message "LVBtw.dll not found", and the program crashes.
Can anybody give me a hint as to what is going wrong on the Axim X51? I have both my .exe and the LVBtw.dll stored on the SD card of the PDAs, in the same directory. On the X51 I also tried installing it in the program files directory, to no avail.
cheers
Martin
Message Edited by Martin Fierz on 02-23-2007 05:44 AM

Hi Martin:
I am recently working on a LABVIEW project on PDA via Bluetooth communication. I used Dell last week and it doesn't work. I thx for your message post to change the PDA to iPAQ. However, I still cannot detect signals from a bluetooth device, that is a Bluetooth pulse oximetry. I want to know some details of your project, which bluetooth device u used in your project? Can it really detect signal in iPAQ?
Thx.

Problems whit Dell Axim x50

Hi..
Im trying to connect my Dell Axim x50 to my new airport Extreme, but for some reason the devise can find the wireless network but the airport never send a message asking for the password, so it never get online. I don't know what to do!
I have been using all types of password, riht i'm using web code!

I have the same problem. The WLAN Utility of the Axim indicates scanning and connecting to network but no connection. I tried this IP addresses [10.0.1.2], have also tried to unlock the Firewall--but no change.
The Wlan Utility is able to recognize different connections but does not go beyond this.
Need help.

Dell Axim X5 Pocket PC compatibility with Belkin 802.11b PDA card

Hello,
I was recently given a Dell Axim X5 Pocket PC and I'm trying to sync it to my IMAC using my internet connection. I'm running OS X 10.3. Dell's website stipulates that the compact flash card that I need is an 802.11b model. I purchased a Belkin 802.11b Wireless PDA Network Card to satisfy this stipulation, but upon investigation of the software I find that I need to be running at least Windows 98 with Window CE embedded. Is there anyway of me getting around this with my MAC???? To further complicate matters, when I attach the pocket pc to my USB port it isn't even recognized. Is this because it's a Windows device??? Is there any work-around for this?????
Thanks

Prakash,
Thanks for contacting National Instruments. According to hp's website, the 2490 does have a type II slot. Also, if you look at the datasheet for the CF-6004 it states that it is a Type II card. Let us know if you have anymore questions.
Regards,
Kenn North
Senior Product Manager - Search, Product Data
http://ni.com/search

Dell Axim G7L0-01 Keyboard

I own a Tungsten E2 PDA and a Dell Axim G7L0-021 PDA Keyboard. The connectors obviously do not match up. However, is there some adapter or connector out there that will allow me to use this keyboard on my E2?
<:AtomicElement>
<:AtomicElement>
Thanks in Avance.
Post relates to: Tungsten E2

There is no adapter available that I am aware of.
You would need to purchase a keyborad that is infrared or bluetooth enabled.
Click on the following link for the Palm keyboards available.
http://store.palm.com/family/index.jsp?categoryId=3325124
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/tungstene2/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Installing J9 on Dell axim x51

I apologise if this is in the wrong forum but I wasn't sure where to put it in the mobility forums.
I've download the free trial version of IBM Lotus Expeditor Toolkit 6.1.2 Multiplatform Multilingual eAssembly from http://www.ibm.com/developerworks/downloads/ls/lxpd/?S_TACT=105AGX28&S_CMP=DLMAIN. I've sucessfully installed the toolkit on my desktop PC with eclipse. However I still have no clue how to get the J9VM on the Dell axim x51 PDA and how to run the .class files.
I tried simply copying the files from eclipse-SDK-3.2.2-win32\eclipse\plugins\com.ibm.pvc.wct.runtimes.jcl.device.win32.x86_6.1.2.0-20071211\rcp\jre\ (which includes j9.exe) to my PDA however when I try to run j9.exe the PDA complains that it's not a valid pocket PC application.
Does anyone have any idea how to get J9VM onto a PDA?

pocketpc programs are installed through .cab files. There should be one somewhere in the package that you can copy to the pocketpc and then execute to have the VM installed. I suggest looking for some documentation.

Dell AXIM X51 and SunONE Sync

Another somewhat related issue to the last one that I posted... but this time I am simply trying to get my new Dell AXIM X51 to sync with our SunONE calendar. I am not having any luck. The Dell AXIM tells me that the XDNT (I think) program is not supported and to get a new version.
I have done Google searches and not found a new program. I did come across the new SunONE Java Calendar sync, but that did not work for me.
Any suggestions?
John

Great! Is there a Beta of 3.0 available? I am testing the X51 for my techs. Right now it does us no good and we have 20 AXIMs sitting in their boxes waiting for me to deploy. :) If you know where I an get a beta for 3.0 that would be great!
Do you know the name of the new client so after the first of the year I can start searching for it?
John

Java Connector being use in Dell Axim x50v "Windows CE"

Hi all,
I have a Dell Axim x50v "Windows Mobile 2003" Windows CE. I would like to use the Java Connector in this handheld device but I have been encoutering a problem of registering the librfc32.dll, msvcr71.dll, etc..
Can I use the Java Connector with the handheld device or not.
It seems like the DLL that came with JCO are not compatible with Windows CE..
Can someone reply and explain.
thanks in advance.
Jen

Hello Jennifer,
you can't use the JCo in Windows CE. You have to use the Mobile Infrastructure. Have a look at http://service.sap.com/mobile and and also <a href="https://www.sdn.sap.com/sdn/developerareas/mi.sdn?node=linkDnode7">Mobile Infrastructure</a> here in SDN.
Regards
Gregor

Sync Windows Mobile 5.0 PDA (Dell Axim) with iBook

After a decade of dependence on Windows I have made the decision to return to Apple products. I am concerned that the transition may be more difficult than expected.
At the moment I am wondering if anyone has been able to sync their Windows Mobile 5.0 based PDA with their Apple computer? If so, what program works?
Thanks

In order to use and sync a PocketPC PDA with a Mac you will need third party software such as The Missing Sync or PocketMac.
iFelix

WRT54GS v.6 and Axim wireless connection

Have been battling this with 2 different routers. First was a WRT54G and now the WRT54GS. When I connect wirelessly with my Dell Axim x51v the connection only lasts about 1 minute then degrades down to nothing, but still shows connected. I have latest firmware for the router and the Axim. I have tried connecting to other routers with no problem, so I know this has to do with this router (manufacturer) and maybe I'm missing some setting somewhere. Any help would be appreciated.

Hi , you will have to make a few changes to your wireless config.....bring up the router setup bu http://192.168.1.1 "admin" is the password....go to the wireless section and select channel 11 , enable WEP under wireless security and then go to advanced wireless settings....reduce the beacon interval to 50 and reduce the RTS and fragmentation threshold by 40 each.....save settings and then check if this improves your wireless signal.

J9 MIDP2 on Dell AXIM x51v

Similar Messages

Maybe you are looking for