Jabber 4 Everyone default service profile

Hello all,
A customer running UCM 9.1.2 with IM&P 9.1.2. They have rolled out Jabber Desktop as the default application for IM and Presence for the organization. We have setup several "SERVICE PROFILES" inside of UCM to differentiate between Ehanced Presence for employees that have both IP Phones and Jabber, and just Regular Presence for employees that do not have an IP Phone on the system. We made the Regular Presence the "DEFAULT SERVICE PROFILE" and then we ran a bulk update to update all users "currently" in the directory to have the option
HOME CLUSTER and ENABLE User for Unified CM IM and Presence.
CUCM is AD integrated so all the users come from AD
The issue we are experiencing is for any new hires, the account gets created in AD then eventually sync'ed into CUCM. We can't find a switch that allows us to make sure new users have certain "DEFAULT USER" settings namely "HOME CLUSTER" and "Enable User for Unified CM IM and Presence. So these new users are not getting this setting and can not login to Jabber until this occures
Thanks

Hi Ryan,
I have the same issue and at the moment no solution for that.
I have a bulk user template, so everytime new users come in, I bulk the setting over the new users.
Would be nice to see, if someone has another solution.
Best regards
Ben

Similar Messages

Struggling to understand Service Profiles and jabber-config.xml

Hi,
I am doing my first Jabber 9.1 deployment and am striggling to understand the use of Service Profiles.
Lots of documentation I have seen states that the jabber-config.xml file should be manually edited then uploaded to the CUCM TFTP servers.
However much of the information contained in this file seems to be the same as that specified in Service Profiles.
When should I use Service Profiles? - do they generate the default jabber-config.xml file or do they have some other purpose?
The documentation seems confused and contradictory!
Thanks

Neither wins. The client will use one or the other depending on the platform and version.
I am struggling to like Jabber - it seems there is a lack of quality documentation and lots of gotchas for the unwary.
I can sympothize with that opinion. There is documentation but it sort of assumes you already know how the puzzle should look and only need guidence on completing individual tasks. The gotchas are a byproduct of the speed they are running development at. IMO this will settle down a bit around the 10.0 release of the *clients* (which will be after the system release of the server software). Every solution has gotchas, we're just a bit battle-weary of them on this one.
For the moment, Jabber mastery is sort of a rare skillset similar to CCX: many can script, few can do it well. Few can make Jabber "sing" at the moment.
Please remember to rate helpful responses and identify helpful or correct answers.

Can you specify the port for default services when installing OEG?

Hi everyone,
The default installation of OEG 11g uses 8090 port for management services, and 8080 for the virtualized services that you register in the gateway. After installation, you can change the ports by editing gateway's Profile Repository in Policy Studio. But is there a way to specify the port number before/during the installation?
Thanks,
Iris

Hi -
here are the steps to change the listening port (in 11.1.1.6)
- Connect to OEG using Policy Studio
- Click on "Edit Active Configuration"
- Under "Services", find the default services, and you'll see a listener for port 8080 there. Right-click to edit this.
- Change the port from 8080 to your desired port. Note that if you've installed the software and running it as a non-root user on Linux, then it will not have permission to bind to a low-number port (like port 80 for instance)
- Now deploy your change (for 11.1.1.6 hit F6 or click on the "deploy" button which is towards the right of the toolbar in Policy Studio).
- You may also choose to version your configuration at this point (click on "version" which is beside the "deploy" button and enter a comment about your version).
Now verify that OEG is listening on your new port. You can see it bind to the new port by looking at the trace [Connect a browser to port 8090 on OEG, login as admin or another user who has rights to view the trace, then click on "Trace"].
It's a usual practice to configure a new listener on SSL (e.g. on port 443) then to delete that pre-configured port 8080 listener, if you want to only receive traffic over SSL.

Configuring the default configuration profile for Profile Manager

Hello folks,
I would like to edit the default configuration profile served by Profile Manger. As far as I understand the only thing I can configure from the Server.app is the name of the profile. The settings for the different services provided by the server (such Mail, Messages, etc.) are automatically chosen by Server.app. When logging as an administrator on the Profile Manager webapp, I can go to "Groups", choose "Everyone", go to "Settings" to review the different payloads. However, almost none of the settings are editable. You can read "This payload is configured using the Server app" on the top of the various panels.
So my question is: How do you use Server to tweek those payloads? Can this be done using the serveradmin command line tool?
Thank you very much for your help.
Regards

Bump. This is annoying the crap out of me. Every time I try to design a website using Coda, this color picker bug plagues me. I just wish I could turn off color profiles completely as I will never use them.

Delete Terminal Services profile from custom directory

We have Terminal Servers running Windows Server 2003.
We have TS Profile Path set to D:\TSProfilesXXX1 using Group Policy.
Now, we are planning to delete all the old TS profiles from C:\Documents and Settings and D:\TSProfilesXXX1 folders.
Found Utility DELPROF from Microsoft, however, it works for C:\Documents and Settings by default and does not seem to be working for D:\TSProfilesXXX1.
Any Help here ???
MCSE Certified

Hi,
Thank you for your posting in Windows Server Forum.
For your issue, you can delete the cached copy of roaming profile by GPO setting. Please check the GPO setting “Computer Configuration | Administrative Templates | System | User Profiles
| Delete cached copies of roaming profiles.”
More information.
User Profiles
To manually remove you can also use registry setting. If you’re connecting to a remote computer and not cleaning up a local registry, click on Registry in the File menu and select Connect To Network Registry. Enter the name of the computer you deleted profiles
from and browse down in the registry to these two locations:
•HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\
•HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\
Detail information.
Clean up Terminal Services profiles with DELPROF
Hope it helps!
Thanks.
Dharmesh Solanki

Management IP from service profile and from server

are there a difference between the management IP from the equipment tab --> server1 --> change mgmt IP
and from server tab--> service profile--> service profile1--> change mgmt IP
as I found that when I configured the mgmt from server in equipment tab, I could not find this IP in the mgmt in service profile mgmt IP
the attachment describe what I mean

Out of band means communication over the 1G management port of the fabric interconnects.
By default, each blade in a chassis slot gets assigned a CIMC IP address out of the pool. Therefore, if you associate the SP to another blade, the CIMC / KVM address changes.
It is also possible to assign an IP address to a service profile, and avoid that the CIMC / KMV address changes, if association of the SP happens. The disadvantage is that you need a additional IP address for every SP, even if the SP is not associated. Therefore most customers don't use this feature.
Therefore, a CIMC can have a max of 2 IP addresses.

Transferring from Yahoo mail to Gmail default service for calendar

Good day,
I am given up on using Yahoo Mail after 13 years. I get timed out and have problems login in and some of my messages don't get forwarded to my BlackBerry. So I switched over to using Gmail as my main e-mail provider and it's been working well so far.
I use Outlook calendar on my laptop and sync it with my Torch 9800 using USB connection. If I remove my Yahoo Mail as a default sevice for Calendar, Contact List and Messaing, and select Gmail as my default service how do I convert all my calendar and contact list to the Gmail profile. Actually, not sure if my contact list would be affected since I don't see the association of the contact list to my Yahoo Mail currently. If I delete my Yahoo profile would my events get deleted or would they get transferred to the default calendar profile? Or do I just sync it again with my Outlook and my events will be transferred to the Gmail profile after selecting Gmail as my default service for Calendar and Contact List. I hope I am explaining this correctly. I also have a Facebook calendar profile showing birthday reminders, which I'm trying to remove but that's another problem.
I want to do it right the first time and don't want to accidentally delete my events and contact list.
Thanks in advance.
Solved!
Go to Solution.

Before doing anything make a full backup of the device.
I think you can solve this by making the Gmail the default service. Then in the calendar app go to Options. On the screen type the letters M O V E. That should move all events to the default calendar. It's been a while since I've done this, though.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Mtu 1500 shows in vcenter but service profile template is at 9000

I have 2 iscsi nics configured on my service profile and they are set to 9000
but in vcenter it is still showing the nics at 1500mtu
any idea?

this is what i see.... Looks like it is not enabled?
sh policy-map
Type qos policy-maps
====================
policy-map type qos ISCSI
class class-default
set cos 5
Type queuing policy-maps
========================
policy-map type queuing default-in-policy
class type queuing in-q1
queue-limit percent 50
bandwidth percent 80
class type queuing in-q-default
queue-limit percent 50
bandwidth percent 20
policy-map type queuing default-out-policy
class type queuing out-pq1
priority level 1
queue-limit percent 16
class type queuing out-q2
queue-limit percent 1
class type queuing out-q3
queue-limit percent 1
class type queuing out-q-default
queue-limit percent 82
bandwidth remaining percent 25
policy-map type queuing default-4q-8e-in-policy
class type queuing 2q4t-8e-in-q1
queue-limit percent 10
bandwidth percent 50
class type queuing 2q4t-8e-in-q-default
queue-limit percent 90
bandwidth percent 50
policy-map type queuing default-4q-8e-out-policy
class type queuing 1p3q1t-8e-out-pq1
priority level 1
class type queuing 1p3q1t-8e-out-q2
bandwidth remaining percent 33
class type queuing 1p3q1t-8e-out-q3
bandwidth remaining percent 33
class type queuing 1p3q1t-8e-out-q-default
bandwidth remaining percent 33
Type control-plane policy-maps
==============================
policy-map type control-plane copp-system-p-policy-strict
class copp-system-p-class-critical
set cos 7
police cir 39600 kbps bc 250 ms conform transmit violate drop
class copp-system-p-class-important
set cos 6
police cir 1060 kbps bc 1000 ms conform transmit violate drop
class copp-system-p-class-management
set cos 2
police cir 10000 kbps bc 250 ms conform transmit violate drop
class copp-system-p-class-normal
set cos 1
police cir 680 kbps bc 250 ms conform transmit violate drop
class copp-system-p-class-normal-dhcp
set cos 1
police cir 680 kbps bc 250 ms conform transmit violate drop
class copp-system-p-class-normal-dhcp-relay-response
set cos 1
police cir 900 kbps bc 500 ms conform transmit violate drop
class copp-system-p-class-redirect
set cos 1
police cir 280 kbps bc 250 ms conform transmit violate drop
class copp-system-p-class-exception
set cos 1
police cir 360 kbps bc 250 ms conform transmit violate drop
class copp-system-p-class-monitoring
set cos 1
police cir 130 kbps bc 1000 ms conform transmit violate drop
class copp-system-p-class-l2-unpoliced
police cir 8 gbps bc 5 mbytes conform transmit violate transmit
class copp-system-p-class-undesirable
set cos 0
police cir 32 kbps bc 250 ms conform drop violate drop
class copp-system-p-class-l2-default
police cir 100 kbps bc 250 ms conform transmit violate drop
class class-default
set cos 0
police cir 100 kbps bc 250 ms conform transmit violate drop
Type network-qos policy-maps
============================
policy-map type network-qos default-nq-4e-policy
class type network-qos c-nq-4e-drop
congestion-control tail-drop
mtu 1500
class type network-qos c-nq-4e-ndrop-fcoe
pause
mtu 2112
class type network-qos c-nq-4e-ndrop
pause
mtu 2112
policy-map type network-qos default-nq-6e-policy
class type network-qos c-nq-6e-drop
congestion-control tail-drop
mtu 1500
class type network-qos c-nq-6e-ndrop-fcoe
pause
mtu 2112
class type network-qos c-nq-6e-ndrop
pause
mtu 2112
policy-map type network-qos default-nq-7e-policy
class type network-qos c-nq-7e-drop
congestion-control tail-drop
mtu 1500
class type network-qos c-nq-7e-ndrop-fcoe
pause
mtu 2112
policy-map type network-qos default-nq-8e-policy
class type network-qos c-nq-8e
congestion-control tail-drop
mtu 1500

Field explorer does not open on my terminal services profile

Dear Sirs,
For some reason I am unable to open my field explorer in any crystal report on my terminal services profile. I have checked with other profiles and the problem does not exist. The problem is specific to my profile. I can also create new reports and access fields however if I use the filed explorer button I cannot access fields, parameters or formulas from there. Problem just started this morning. We have been using crystal reports X1 for last 12 months. Would it be a terminal server issue?
I would appreciate whatever help you can give me.
Regards,
Philip Brady
Finance Director
National Electrical Wholesalers (Irl) Ltd

Hi Philip
This can be an issue with the terminal server that you are using. Please refer to the Crystal Reports XI supported platforms guide if the server that you are using is supported or not.
You can download the guide from the below link:
[download CR XI supported platforms guide|http://www.2shared.com/file/4065156/f2ef25e1/cr_xi_supported_platforms.html]
Hope this helps!!
Regards
Sourashree

Can't add a new vNIC for service profile

Hello,
I'm trying to add an additional vNIC for Service Profile.
B200-M3, VIC1240+expander, IOM 2208XP, 4 links between IOM and FI 6248, firmware 2.2(1f).
At the moment 7 vNICs are configured for this service profile. Service profile is associated with blade server.
When I try to add a new vNIC (it will be 8th vNIC), I see the error (see the attachment).
For some reasons separate vNICs are more useful for Hyper-V servers :)
All vNICs created via vNIC templates. All vNICs configured as VMQ, only iSCSI configured as Dynamic,
As I read the spec, VIC1240 can support up to 250 vNICs. What is wrong ? How to fix that ?

I have seen the VMQ limit being reached when applying the VMQ policy to the vNIC template. Can you try not selecting the VMQ policy for these new vNICs. If this works, you might be reaching the VMQ limits as described below:
Number of VMQ's:
128 is the Maximum number per vNIC
256 is the max number per Blade

Change Default Color Profile in New Image Document ?

I've looked and looked, and even Googled. Anyone know how to change the default color profile when you start a New image file? In CS5 mine defaults to sRGB (Under the Advanced drop down) but my CS6 is ProPhoto RGB which means I have to change it manually nearly every time I paste an image copied via right click in a web browser.

I think it the same on windows. If I copy things to the clipboard with Photoshop that the document profile seem to be used there when I do a paste there are no color issues. However if I use Prtscn or Alt+PrtScn to capture screen content. I'll see that the colors are wrong when I paste the clipboard into a new document if my default color space is not sRGB. Then I need to assign sRGB to the document to correct the colors.
If I paste a screen capture into the current document the color can be very off and I will not get a prompt on the color mismatch. Therefore I don't think a screen capture has any profile associated with it. And of course the screen has a much lower resolution then the images I edit. So there is also a big size difference. Here is one scaled to 100% zoom after the paste. You can see both the color and resolution difference. This capture was assigned to sRGB so you will see what the screen looks like after the paste and zoom to 100%.
Message was edited by: JJMack

Using copyprofile to customize the default user profile

Well to get to the problem I'll just explain what I do, which doesn't work.
1. I install windows 8.1 pro (x64) on a test-pc.
2. After installation I press cntrl shift f3 to get into audit mode.
3. I install all software/drivers etc. I also place shortcuts and change the background.
4. I insert my usb, which contains a file called "unattend.xml" in which this is written:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="specialize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CopyProfile>true</CopyProfile>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:e:/usb/windows%207%20en%208/win81pro/sources/install.wim#Windows 8.1 Pro (x64)" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
5. After that I use CMD and use this command: C:\windows\system32\sysprep\sysprep /oobe /generalize /shutdown /unattend:F:\unattend.xml
6. when it is done working and turns off, I turn it back on and walk through the oobe. After that my shortcuts and background are standard windows 8.1 and not the ones I used.
Can anyone see what I did wrong? I can't seem to figure it out. Thanks!
Btw: This unattend.xml file is created with windows system image manager of the same install.wim which is used to install that OS.
Note: If I generalize a pc after an installation, doesn't that cancel the activation? So when I bring it to a customer he needs to fill in the activation key?

Hi,
After the step 5 (I mean after we customize the default user profile and reference PC sutts down), generally as I know, we should then capture image, you can boot into Windows PE and then capture the Windows installation by using DISM.
See full guide in the link below
https://technet.microsoft.com/en-in/library/hh825135.aspx?f=255&MSPPError=-2147217396
The article also contains some conditions in which user profile settings aren't successfully copied, such as you can not use a domain account, there are no additional user accounts other than the built-in administrator account that you configured,, etc and
sysprep will remove all the security settings of your Windows including windows activation.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to change path of Users Terminal Services Profile for multiple AD users on server 2003?

Hello experts. I am working on a file server migration. All data has been migrated, I am currently working on redirecting users to the new file server. I
am able to select multiple users at once in ADUC -> right-click -> properties -> profile and here I can change the home folder and roaming profile path for each all users to point towards the new file server.
The issue I have run in to is that we have roaming profiles for terminal services users. So, there are hundreds of users that have their terminal services profile
configured in AD -> Right-click user (one at a time) -> properties -> terminal services profile. Here, the profile path is configured for each user as \\OLDserver\Profiles\%username%
and I need to change it to \\NEWserver\profiles\%username%.
I know that you can configure this path via group policy, I set up a GPO; Computer / Administrative Templates / Windows Components / Terminal Services / “Set Path
for TS Roaming Profiles” as \\NEWserver\profiles and applied this GPO to an OU containing the TS servers.
The problem is, the GPO is not working... When I log in to the TS and add a document to My Documents, it is still saving under \\OLDserver\profiles\Username.
So, the settings in AD are trumping the GPO I believe. What is the best way to accomplish my goal? Thanks in advance!

> to change it to \\NEWserver\profiles\%username%.
That is "profile" in opposite to...
> add a document to My Documents, it is still saving under
> \\OLDserver\profiles\Username.
...this one which is Folder Redirection and has NOTHING to do with
server based profiles.
> So, the settings in AD are trumping the GPO I believe.
No, it isn't. When you do not enable FR and you access "Documents", you
will never see an UNC path but the local c:\users\xyz\documents folder.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to assign the default service package to the user in the command line ?

when i create use use the following command ,which service package is assigned to the user ,or in where can i set the default service package ,thanks for you!
/opt/SUNWcomm/bin/commadmin user create -D admin -F John -l jdoe -L Doe -n jnpc.com.cn -p 80 -w admin123 -W demo -X v120e.jnpc.com.cn -S mail,cal -E [email protected] -H v120e.jnpc.com.cn -k legacy

When I create a user via command-line, I get no service package. I don't see any way to assign such on creation via command-line.
Some of what might be in a service package can be set as default falues, through configutil.
quota is this kind of thing.

How to set default services in cc.xml

Hi,
When deploying a repository manager, I can set the default services in a co.xml by setting
<property name="services" value="properties,feedback,layout"/>.
But how can I set the default values for services in cc.xml? I tried
<attribute name="services" type="List" default="properties"/>
but that doesn't take effect.
Help appreciated!
Thanks,
Ray

Hi Martin,
Thanks, it works:) points rewarded.
By the way, if I want to specify the default value of a property of type "
class
" to "<u>Not Set</u>", how should I write the cc.xml? I have this requirement because, by default, the <u>Property Search Manager</u> is
com.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
, which has something wrong in our EP.
In my cc.xml I wrote:
<attribute name="propertysearchmgr.class" type="class" constant="" />
But failed. What should I do?
Thanks,
Ray

Jabber 4 Everyone default service profile

Similar Messages

Maybe you are looking for