Jabber and Mobile Connect

Just setup Jabber (9.0.2) on iphone with Mobile Connect (CUCM 7.1.5). I run into incoming call issue where both Jabber & mobile phone would rings about the same time. I did some of research and Cisco doco below state Mobile Connect should automatically inactivated when Jabber is running and connected to the corporate network.
Anyone has this issue or could point me to the right direction?
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9.0/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#CJAB_TK_ADA0EB97_00
Add Mobile Connect and Mobile Identity
Mobile Connect, formerly known as Single Number Reach (SNR), allows the native mobile phone number to ring when someone calls the office number while Cisco Jabber is not available.
When Cisco Jabber is running and connected to the corporate network, and thus available to receive VoIP calls, Mobile Connect is automatically inactivated.
The user requires a Mobile Identity to transfer Cisco Jabber VoIP calls to the mobile voice network.

Remote Destinations will always ring, regardless of whether the TCT device is registered or not. A Mobile Identity will not ring when the TCT device is registered to CUCM. This is especially important as you don't want the cellular phone and the wifi phone app contending for the user to click answer on both on the same device. You may still want to use RDP if the user has a home office in addition to their smartphone.

Similar Messages

Java wit gis and mobile connectivity[sms]

i got a prjt 2 do
here is d outlin
a customer messages me his query via his mobi abt movin from 1 destination to another .on gettin on my comp i perform a search using tools lik googl map etc and reply.this is d outlin
wat wat wil i require to actually build such a model
i tried javax comm for messagin but it aint workin pls pls giv me a proper procedure to follow.
how do i query in google map using a java prgm wat connectivity shd i use.
wil arcexplorer be of better help
can i hav a prgm tat msgs a mobil customer via yahoo messenger savin on costs.
one more thin i need to monitor traffic conditions in my city usin peopl travellin wit cell phones how do i get tis all done

all i need is a simple connectivity in java to create a geodatabase/use googleEarth so that i can query about reaching one place to another in a city through a sms from the user's end

Computer and mobile connection via datacable?

Hello guys i want to create a program for a mobile and computer.
example midlet for mobile is a server that listen to the input from the client from computer.
i want to use datacable connection..
how to do that plss help..

ahh... it means that it is called "serial connection" your post help me because it gives me a keywords to search in google.
Edited by: 871484 on Jul 14, 2011 9:39 AM

Jabber 9.1.2 missing DLL's with Win8 64bit and WebEx Connect

I realize that Windows 8 is not yet listed as supported operating system for Cisco Jabber for Windows, but I would like to make it work anyway I am trying to use Cisco Jabber for Windows 9.1.2 on Windows 8 with WebEx Connect. I am able to log in and IM just fine, but when I attempt to launch an Instant WebEx Meeting the first time, I receive the error
"WebEx Meeting is unavailable. Unable to connect to WebEx meeting server. Please try again later."
However, for any subsequent attempt to launch an Instant WebEx Meeting, I receive three errors in this order:
1) The program can't start because atWbxUI14.DLL is missing from your computer. Try reinstalling the program to fix this problem.
2) The program can't start because ATKBCTL.DLL is missing from your computer. Try reinstalling the program to fix this problem.
3) WebEx Meeting is unavailable. Unable to connect to WebEx meeting server. Please try again later.
In both cases (fresh install and subsequent attempts) I receive an email letting me know that my meeting is in progress. So, I know that it has connected to meeting center and set up the meeting. It just can't seem to launch the WebEx interface. I have no problems launching WebEx by any other method that I have tried (e.g., Productivity Tools, from a browser, or if I uninstall Jabber and install the WebEx Connect client).
Has anyone seen this one?

I had actually tried that already, but just for kicks I did it again. Webex Connect was not installed. I uninstalled anything that had the word webex in it. I uninstalled Cisco Jabber. I went through C:\ProgramData and C:\Users\[username]\AppData\, and I deleted anything that had the words Webex or Jabber. I rebooted the computer, I installed Cisco Jabber. I rebooted the computer again before starting the application. Then I went into meetings and clicked "Instant WebEx Meeting." It gets to the point where it is installing the webex plugin. Once the WebEx plugin installion completes, I get the same error as before.
Since Windows 8 is not listed as a fully supported operating system for Cisco Jabber for Windows, I suppose this kind of thing is to be expected. I was just hoping that maybe someone had found a work around.

Configure Jabber for Mac with local CUCM and WebEx Connect

Hi, I was wondering if anyone has been able to configure the Jabber for Mac 8.6.2 client to use the WebEx Connect presence server with a local CUCM and Unity Connection servers. The preferences accounts tab does not show or allow the addition of the voice services. I have added from a working local CUCM preferences plist file what I believe are the correct entries however I still cannot see the accounts on the preferences tab. We currently do not have a local cisco presence server hence the requirement to trial the WebEx Connect server as I can't get past the first configuration step without it.
regards
paul

Hi - I have done this via the admin portal but still cannot get the Jabber client for Mac to register for voice. The Windows version works fine for the same user and CUCM device. Are there any other settings that need to be enabled specific to the Mac client?
Thanks.

Jabber for Windows and Unity Connection Voice mail out of sync

Hello all,
Now that Jabber is pretty much part of every install you begin to notice some trends. One trend that I have noticed happening across several of customers is complaints about Jabber and the Voicemail server getting out of sync. It’s never really been a wide spread issue but it has be noticed by several of my customers enough so that I’m reaching out to see if others are experiencing the same problem. Here are the symptoms, a person sitting at their desk they have a physical phone, and a windows PC running Jabber 4 Windows. They miss a call and the MWI lamp gets lit on the phone but not on Jabber. When you click on HELP / Show Connection status, you see all green checks, and Voicemail shows connected from Jabbers standpoint. When you exit the application and come back in, then it sync’s back up just fine. I have never seen it happen myself, but to be honest I’m never at my desk enough to even notice if my phone lamp is lit.
Anyway has anyone had similar issues? If so is there a fix?

Symptom:
User logged in Jabber and do not log-off/sign-out for more than 24 hours and then jabber does not receive new voicemails from Unity Connection. User will be able to receive voicemails from other interfaces like Outlook, TUI but voicemails will not show up in Jabber.
Conditions:
User does not sign out from jabber for more than 24 hours since last log on.
Workaround:
Sign out from jabber at-least once a day and sign-in back so that subscription will not expire in Unity Connection database.
Voicemail does not sync if Jabber left logged in for more than 24 hours
CSCuo46274
Can be fixed, depends on releases, TAC offered me a fix in version 10.5(1)ES29

HI, want to connect XI and Mobile

hi,
Experts,
I am new to mobile world.
can you please tell me how to connect Mobile and XI.
I want to know the flow between Mobile and XI, how data will go?
I have heard about mobile gateway, what is it?
What changes I have to make in XI server to support Mobile connectivity?
Thanks.
Waiting for replies..

Hi divyesh vasani,
Welcome to Mobile Infrastructure... you can easily get along with MI by just following some of the links below:
- what is mobile infrastructure?
-Mobile--XI--R/3
2. R/3 Gateway for mobile
Document for Data Flow between Mobile and XI is a very good Document for understanding <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceb31d4f-0901-0010-60bc-8162e7c6179d">Integrating Mobile Device With SAP XI</a>
PS: <b><i>Do Reward points if this helps you...</i></b>
Cheers,
kumarR

WIFI and mobile data connections not connecting with any other outside WIFI networks. Bluetooth not working in car. Any solution?

After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.

Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-...

Connect pc and mobil though com port

I want to connect pc and mobil.But i don't have set command commapi to connect them.Can you give that ?
Thanks a lot.

You mean the jar file?

Jabber and CUPC with SAMETIME

What does the Jabber service and client provide and what does the CUPC client provide? Do I need both? Which will provide me video conferencing? Can I interface with SAMETIME and have all of the same features for the users, between the users? Are there any limitations?
Thanks!

Thank you Leonardo. I was able to access the second link.
But I do have a few more questions...
What does "not support video calls in deskphone mode only in softphone mode mean?"
So CUPC and Jabber use independent servers, and they have their own clients. According to the document it says I need "CUP, CUCM and Unity Connection or in a Cloud-based soultion using the Cisco Webex services". Does this mean if I use the combination of products I don't require Webex? Can I build my own Cloud-based Webex solution, or is the one that I have to subscribe to?
Is there a protocol diagram showing how all talk to one another via protocol? Are all connections encrypted?
For my client message can I have it take the information from the users Exchange Calendar vice them selecting Available, Away, and Do Not disturb?
Jabbers client is collecting numbers from a directory server. Does this directory server retrieve the information from Active directory? We want to have a central source for all user information.
To perform desktop sharing I need CUCM 8.6 and associating a "device" with a BFCP-enabled SIP profile. I'm not clear on associated a device and what BFCP is. What if the user doesn't use the same workstation everyday, or their mobile. Do we just need to ensure all devices are registered with CUCM? We also use VDI. Not sure how all of this ties together.
Thanks!

Jabber and Voicemail Notifications

Hello guys!
Is it possible to receive voicemail notification on both jabber and desk phone at the same time? For example, if a user has a desk phone as primary extension on CUCM 8.6, the Unity use that extension for VM. But if the user has also a jabber client version 9.x for Windows and wants to receive voicemail on jabber, what is the best design option? Assign the same DN to both jabber and desk phone?
Also, I set up visual voicemail for jabber but left a voicemail in jabber and no notification appeared, where should i look into? The voicemail server and profile with users were added in CUP.
Note: The scenario is a BE6000 platform with CUCM8.6, CUCxN,8.6, CUP8.6 and CUPM8.6.
Thanks in advanced!

Why would you have different extensions on desk phone vs. jabber? Normally this is not desired for user to manage 2 different numbers.
If however that is a requirement you can always define alternate extension on Unity Connection.
For VM configuration did you configure all the service in CUPS server, i.e. mailstore?
HTH,
Chris

Jabber and O365 integration

Hello,
Do we need any additional licenses from Cisco or Microsoft to make a full possible integration between O365 and Jabber ?
For example features like :
Single Inbox Unified Messaging with SpeechView transcriptions, Microsoft Word Click to Call, SharePoint Presence & Click to Call, Jabber video calling and desktop sharing, and WebEx on desktop and iPad,
Thank you for your help
Best Regards,
Tomasz

Tomek,
There is no direct integration between Jabber and Office 365, except for Exchange Gateway integration on IMP server side which is not supported with Office 365. All other Jabber integrations do not go to Office 365, calendar client integrations are done with Outlook, and UM integration is between Office 365 and Unity Connection, which does not affect Jabber.
HTH,
Chris (Krzysiek) :-)

Jabber and Desk Phone Integration

When stting up "Desk Phone Integration" on cisco Jabber on a test iPhone, Jabber loops forever when verifying account information saying just "verifying...". It never display an error message. It will eventually stop, the "Desk Phone Integration" staying "Not Configured"
CUCM version : 8.6(2)
iPhone iOS : 6.0.1
Jabber client : 9.0.2.20078
I followed the instructions in the "Administration Guide for Cisco Jabber for iPhone Release 9.0.1" to setup the call manager.
I created a dedicated SIP profile,
created the TCTTEST "Cisco Dual Mode for iPhone" phone according to the documentation
and edit my phone and user settings according to the "Enable Active Call Transfer Between Cisco Jabber and Desk Phone" section of the documentation
despite all that, it doesn't work
I tried with other accounts/mobiles and the result is the same.
Jabber does register to the CUCM and I can get my extension on the Jabber client and place/receive calls using my desk extension. But the "desk phone integration" doesn't work
What I noticed is that :
on the TCTXXXX "Cisco Dual Mode for iPhone" phone device setting page, there is no "Sign In Feature" option as described in the documentation
because we use Extension mobility the "Owner User ID" feature is disable on the desk phone device settings. I temporarily uncecked the "extension mobility" checkbox on the device, setup my ID as the "Owner User ID" and re-checked the "extension mobility" checkbox but the result is the same.
I searched the web and couldn't find anyone with similar issue...help will be appreciated

Aaron,
Thanks for you answer.
I have followed all the requirements explained in the "Administration Guide for Cisco Jabber for iPhone Release 9.0.1" including the one you mentioned :
the user is a member of 'Standard CTI Enabled'
CTI Controlled is allowed on the DN, the end user account and the desk phone
the end user is associated to both the desk phone and the TCT phone
And 'Allow End User Configuration Editing' is set to disable on the TCTxxxx device
Despite all that the "desk phone integration" doesn't work

Jabber and Messages: error with cert

Hi all,
Since upgrading to Mavericks, I'm not able to connect to my company's Jabber server. I get a cert error, even after I've trusted the cert. All Mavericks users at our company are having the same problem, so the problem isn't just on my computer. I've enclosed a screen shot of the error.
Is anyone else having the same problem? The same setup - Jabber and Messages - works fine in Mountain Lion and previous OS versions.
Thanks!

Hi,
Look at item 4 in this article
http://support.apple.com/kb/TS3970
Some people deliberately alter this file to prevent some apps from "phoning home"
If I am reading this Cert info correctly you are one of the companies that someone might block.
9:58 pm Monday; November 4, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Jabber and calendar integration

Hi,
I've got two types of Jabber client deployment - on prem and cloud based (this is the old webex connect, not jabber for telepresence). Both have different issues with calendar integration.
On prem Jabber:
1. Presence status is passed to Outlook
2. Calendar appointment whilst they do show up within meeting tab on Jabber client, the status of the client doesnt change to "In a Meeting" during appointments.
Off prem Jabber:
1. Presence status is NOT passed to Outlook
2. Calendar appointments works fine - ie show up in the meeting tab, and status changes correctly.
I have modified AD attribute proxyaddress for on prem clients to SIP:samaccount@cupdomain, I've assumed that for off prem clients, it would be SIP:email@domain as used by login details. I cant seem to find any documentation about calendar integration with webex connect clients.
Any ideas?
Thanks

Hi Elena,
Is it same machine where Outlook integration works with on-prem? If not, there are few things that you could check:
Uninstall other IM clients
Check if any other IM client with Outlook integration has been installed. Many other clients use the same api’s to integrate with Microsoft products and maybe blocking Jabber Click to X. If any other product is installed please uninstall and reboot your machine.
Some applications known to affect Jabber presence integration are: Cisco WebEx Connect, Microsoft Office Communicator, Microsoft Lync, CUCIMOC, CUCILync, Standalone Click to call, Cisco Unified Personal Communicator 8.x.
Registry settings
Confirm the following registry settings exist and are correct:
32-bit machines
Key: HKEY_CLASSES_ROOT\CLSID\{8885370D-B33E-44B7-875D-28E403CF9270}\TreatAs
value (REG_SZ): (Default) = {83CE44B6-A512-4199-9766-38357A9108E8}
-Jabber sets this on install; it replaces the existing class ID with ours
Key: HKCU\Software\Microsoft\Office\12.0\Common\PersonaMenu
value (REG_DWORD type): Enabled = 1, EnablePresence = 2, RTCApplication = 3, SetOnlineStatusLevel = 2, ShowStatus = 1
-Office creates these values on install.
Key: HKLM\Software\Microsoft\Office\Outlook\Call Integration\IMApplication
value (REG_SZ): IMApplication = CiscoJabber.exe
- Jabber sets this value on install, this key is created when office is installed
Key: HKCU\Software\Microsoft\IM Providers
value (REG_SZ): DefaultIMApp = Cisco Jabber
- Jabber sets this value on install
Key: HKCU\Software\IM Providers\ Cisco Jabber
value (REG_DWORD): UpAndRunning = 0 (not running), 1(starting), and 2 (running)
- This key is set by Jabber you do not need to create or manually edit this Registry Key.
- If jabber is running and this key is not set to 2 then there is problem, gather a prt.
64-bit machines
Key:HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{8885370D-B33E-44B7-875D-28E403CF9270}\TreatAs
value (REG_SZ): (Default) = {83CE44B6-A512-4199-9766-38357A9108E8}
-Jabber sets this on install; it replaces the existing class ID with ours
Key: HKCU\Software\Microsoft\Office\12.0\Common\PersonaMenu
value (REG_DWORD type): Enabled = 1, EnablePresence = 2, RTCApplication = 3, SetOnlineStatusLevel = 2, ShowStatus = 1
-Office creates these values on install.
Key: HKLM\Software\Wow6432Node\Microsoft\Office\Outlook\Call Integration\
value (REG_SZ): IMApplication = CiscoJabber.exe
Key: HKCU\Software\Wow6432Node\IM Providers\Cisco Jabber
value (REG_SZ): Friendly Name = Cisco Jabber
value (REG_SZ): GUID = {83CE44B6-A512-4199-9766-38357A9108E8}
value (REG_SZ): ProcessName = CiscoJabber.exe
Key: HKCU\Software\IM Providers\Cisco Jabber
value (REG_DWORD): UpAndRunning = 0 (not running), 1(starting), and 2 (running)
- This key is set by Jabber you do not need to create or manually edit this Registry Key.
- If jabber is running and this key is not set to 2 then there is problem, gather a prt.
If all is in order, then open a support case with Cisco TAC and provide logs as below:
Enabling Outlook logging
Setting this registry data enables logging for the presence features that integrate between Outlook and Jabber, and shows additional information in Outlook and Jabber. To set this registry key, do the following:
Click Start, and then click Run.
In the Open box, type REGEDIT, and then click OK to start Registry Editor.
Navigate to key: HKEY_CURRENT_USER\Software\IM Providers.
Create DWORD: OfficePresenceLogging with Value: 1.
If it does not exist already, manually create %userprofile%\Tracing directory, otherwise the log files will not be created.
Restart Outlook.
The log file is created in the %userprofile%\Tracing folder and the file name will be OfficePresence-#.log (where # is an integer). The last modified date will indicate which file is the latest.
Create a Jabber Problem Report (PRT)
Recreate the issue.Do this by opening the email\SharePoint page that shows the problem, select an example user, show their contact card.
Take screenshots of the issue and record time stamps.
Take note of the User names and email address\IM address of the problem users.
Go to your Jabber client and select Help > Report a problem, and then follow the steps to produce the problem report.
Thanks,
Maqsood
Uninstall other IM clients
Check if any other IM client with Outlook integration has been installed. Many other clients use the same api’s to integrate with Microsoft products and maybe blocking Jabber Click to X. If any other product is installed please uninstall and reboot your machine.
Some applications known to affect Jabber presence integration are: Cisco WebEx Connect, Microsoft Office Communicator, Microsoft Lync, CUCIMOC, CUCILync, Standalone Click to call, Cisco Unified Personal Communicator 8.x.

Jabber and Mobile Connect

Similar Messages

Maybe you are looking for