Jabber and Shockwave
I use Jabber, but since installing have had issues with Shockwave not responding. Is this common, connected or just coincidence?
Cheers
Chris
Hi Chris,
I have Adobe Shockwave 12.1.6r156 and Jabber for Windows 10.5(4).
Try to install and test each one separately.
What versions do you have?
Similar Messages
-
Jabber and Voicemail Notifications
Hello guys!
Is it possible to receive voicemail notification on both jabber and desk phone at the same time? For example, if a user has a desk phone as primary extension on CUCM 8.6, the Unity use that extension for VM. But if the user has also a jabber client version 9.x for Windows and wants to receive voicemail on jabber, what is the best design option? Assign the same DN to both jabber and desk phone?
Also, I set up visual voicemail for jabber but left a voicemail in jabber and no notification appeared, where should i look into? The voicemail server and profile with users were added in CUP.
Note: The scenario is a BE6000 platform with CUCM8.6, CUCxN,8.6, CUP8.6 and CUPM8.6.
Thanks in advanced!Why would you have different extensions on desk phone vs. jabber? Normally this is not desired for user to manage 2 different numbers.
If however that is a requirement you can always define alternate extension on Unity Connection.
For VM configuration did you configure all the service in CUPS server, i.e. mailstore?
HTH,
Chris -
Hello,
Do we need any additional licenses from Cisco or Microsoft to make a full possible integration between O365 and Jabber ?
For example features like :
Single Inbox Unified Messaging with SpeechView transcriptions, Microsoft Word Click to Call, SharePoint Presence & Click to Call, Jabber video calling and desktop sharing, and WebEx on desktop and iPad,
Thank you for your help
Best Regards,
TomaszTomek,
There is no direct integration between Jabber and Office 365, except for Exchange Gateway integration on IMP server side which is not supported with Office 365. All other Jabber integrations do not go to Office 365, calendar client integrations are done with Outlook, and UM integration is between Office 365 and Unity Connection, which does not affect Jabber.
HTH,
Chris (Krzysiek) :-) -
Jabber and Desk Phone Integration
When stting up "Desk Phone Integration" on cisco Jabber on a test iPhone, Jabber loops forever when verifying account information saying just "verifying...". It never display an error message. It will eventually stop, the "Desk Phone Integration" staying "Not Configured"
CUCM version : 8.6(2)
iPhone iOS : 6.0.1
Jabber client : 9.0.2.20078
I followed the instructions in the "Administration Guide for Cisco Jabber for iPhone Release 9.0.1" to setup the call manager.
I created a dedicated SIP profile,
created the TCTTEST "Cisco Dual Mode for iPhone" phone according to the documentation
and edit my phone and user settings according to the "Enable Active Call Transfer Between Cisco Jabber and Desk Phone" section of the documentation
despite all that, it doesn't work
I tried with other accounts/mobiles and the result is the same.
Jabber does register to the CUCM and I can get my extension on the Jabber client and place/receive calls using my desk extension. But the "desk phone integration" doesn't work
What I noticed is that :
on the TCTXXXX "Cisco Dual Mode for iPhone" phone device setting page, there is no "Sign In Feature" option as described in the documentation
because we use Extension mobility the "Owner User ID" feature is disable on the desk phone device settings. I temporarily uncecked the "extension mobility" checkbox on the device, setup my ID as the "Owner User ID" and re-checked the "extension mobility" checkbox but the result is the same.
I searched the web and couldn't find anyone with similar issue...help will be appreciatedAaron,
Thanks for you answer.
I have followed all the requirements explained in the "Administration Guide for Cisco Jabber for iPhone Release 9.0.1" including the one you mentioned :
the user is a member of 'Standard CTI Enabled'
CTI Controlled is allowed on the DN, the end user account and the desk phone
the end user is associated to both the desk phone and the TCT phone
And 'Allow End User Configuration Editing' is set to disable on the TCTxxxx device
Despite all that the "desk phone integration" doesn't work -
Jabber and Messages: error with cert
Hi all,
Since upgrading to Mavericks, I'm not able to connect to my company's Jabber server. I get a cert error, even after I've trusted the cert. All Mavericks users at our company are having the same problem, so the problem isn't just on my computer. I've enclosed a screen shot of the error.
Is anyone else having the same problem? The same setup - Jabber and Messages - works fine in Mountain Lion and previous OS versions.
Thanks!Hi,
Look at item 4 in this article
http://support.apple.com/kb/TS3970
Some people deliberately alter this file to prevent some apps from "phoning home"
If I am reading this Cert info correctly you are one of the companies that someone might block.
9:58 pm Monday; November 4, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Jabber and Gmail Don't Work on my iChat
Hello! I bought my Mac in August 2009. When I first bought it, gmail and Jabber worked iChat. But shortly after, it stopped working. It hasn't worked since then. Whenever I would try to create a Jabber or Gmail account on iChat, the words Jabber and Gmail would be grayed out and un-clickable. I recently upgraded to software version 10.6.6 and Jabber and Gmail still don't work on iChat. They're not grayed out anymore, they're just not there! Aim, Bonjour, MobileMe, and Mac.com accounts all work on my iChat.
Additionally, I took my Mac to the Genius Bar and they couldn't fix it!
Does anyone know how to fix my problem?
Thanks!!Hi,
Welcome to the Discussions
Sounds like you have Parental Controls turned On for the Mac User Account you are using.
I take it you are not seeing 5 choices in the iChat Menu > Preferences > Accounts > + Button > New account Pane ?
The Start Up Screens do have the AIM login options (AIM, @Mac.com and MobileMe) on one pane/Screen and then the Bonjour option and the Jabber/Google options on another Screen/pane.
IF you are not logged on the Computer as the Admin Account the Mac User Account can have Parental Controls activated.
(System Preferences > Accounts - the account will be listed as "Managed"
Limiting iChat in Parental Controls stops you adding any Buddy List (Setting up a new account).
In iChat 4/OS 10.5.x Jabber and Bonjour are disabled completely (Just Bonjour in iChat 5/OS 10.6.x)
Your symptoms as described, if we are talking about the iChat Preferences way of Adding a New Account, does not seem to quite match the scenario I have described about Parental Controls, as you seem to still have access to setting up a new AIM name.
Did the Tech guy delete the .plists for iChat ?
Did he/she delete them 'En Masse' or one at a time with an iChat Restart in between ?
7:26 PM Thursday; January 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
I use a Google Talk account, and I was delighted to see that iChat was compatible with it. However, one day it stopped working and I saw my account was deleted. I went to re-create it and Jabber and Google Talk are no longer choices I can choose from. I can see them, but I can't actually select them. Any help would be great, because a lot of my friends are Google Talkers.
Have you Enable Parental Controls on this Mac User Account ?
Have you set Parental Controls on another User Account and set iChat up with the same ID ?
(Have you used the same ID/Screen Name on another computer that has Parental Controls ?)
If you have and you have not allowed the Jabber Buddies to be listed or have not set the iChat part up in the first place you will have issues as Jabber (and therefore Googletalk) and Bonjour can be Blocked.
This more effects Leopard than it does Snow Leopard but that was why I hinted at other computers because it blocks the Buddies by Flagging them on the Server (this does not explain why you cannot access the choice in the current iChat)
4:41 PM Saturday; October 3, 2009 -
Jabber and AIM/.Mac contacts in ONE window
I would like to have a single iChat window that combines the Jabber and AIM/.Mac buddies. That way I can log on to AIM directly from iChat (and use video/audio) and also be able to log on to google chat MSN via jabber gateways. I hate having two different windows for each buddy list.
I there a way of doing this with Leopard's iChat?Hi,
I use several including GoogleTalk.
It is not about whether the server can do Audio or Video as Most Jabber Servers can not
iChat invokes it's A/V protocols whichever Buddy list it is in which do not use the same ports as any of the Buddy List's logins.
The A/V side is independent of the Text based side.
I have found that the Green icons show up.
This seems independent of whether the Jabber Server supports it.
8:15 PM Sunday; November 25, 2007 -
Hello everyone,
We're trying to integrate meeting place and webex with our presence service to allow Jabber and CUP users to use all of the available features we have.
We're having some issues to get webex up and running because we're getting a "The WebEx meeting account is invalid" message everytime we try to access from jabber.
If I go to meeting center I can successfully log in using the same credentials I'm using on jabber so I don't understand why it says the account is invalid.
This issue happens for all of the users. Have anyone seen this behaviour already?
Thanks!!We use Meeting Center rather than Meeting Place but I think the authentication is similar. The problem I had was since we use Meeting Center (cloud WebEx) and do not use SSO the accounts are different. Once the Not Set "Source for Web Conferencing" was configured, I was able to goto the client (Mac Jabber 8.6.2 in this case) and enter my credentials in Preferences -> Accounts -> Meetings
-
Having a problem using Jabber and a Yahoo gateway. I set up an account (using Psi) and that was successful. I can chat with others using Psi just fine. But when I set up iChat to do this it recognizes my account, logs me in but when I open a chat with a Yahoo buddy I see them typing but the message never appears. My Yahoo Messenger and Psi work just fine but iChat is a no go I've tried creating a new Jabber account (with Psi) same results. Tried it on 2 different computers - iBook G4 and 933 mhz QuickSilver G4. Same results. Anyone have any ideas?
Strange.
I'm still having the same problem with the server you recommended. I'm wondering if there is something that I'm not configuring correctly in Psi or iChat.
Just to reiterate the issue:
I can sign up for a Jabber account,
configure it using Psi (loading the yahoo and msn gateways),
Log out of Psi,
Register the Jabber account in ichat and log in,
What works:
The contacts appear in my iChat Jabber list,
Those that are online appear online
I can send a message out to the contact
What doesn't work:
Receiving incoming chats from buddies
Receiving replies to chats that I've initiated
Actions I've taken so far:
Enabled port 5222 and 5223 on UDP and TCP
I've tried with SSL activated and deactivated
Any other ideas or recommendations for servers that are working?
Thanks,
...Jamie -
Jabber and Bonjour windows won't open
My jabber and bonjour windows have stopped opening. They used to work. One day I closed them and can't get them open again. Any help out there?
Hi,
Summary of the last.
In iChat > Preferences > Accounts the items should be marked as Use the Account
This will log it in but will not guarantee display of the Account's Buddy List as you can Hide it as I described before.
In iChat > Preferences > Accounts the list is drag-able so that they can be in any order you want.
This effects the order they display in iChat's Window menu and the Keystrokes Used. If you have them as AIM, Bonjour then Jabber - the Keystrokes will be Apple (⌘) key and 1 for AIM, then Apple (⌘) and 2 for Bonjour and the Jabber one is then Apple(⌘) and 3 (Keys are used together at the same time)
It also effect the order the accounts display in iChat menu > Accounts.
Clicking this red button will hide that particular Buddy List
This is My iChat Window Menu.
It show three accounts logged in.
These menu Options do not mean the Buddy List is visible.
As I have iChat 4, the order is as I set them in iChat > Preferences > Accounts as the list here can have one item dragged above or below another.
As I have two names that work with the AIM servers the AM valid names shows as the Account name rather than saying "AIM Account"
IF you highlight the Buddy List Name as I have done in this pic you can Hide or Reveal the Buddy List (Alternate action). Using the red button highlighted in the first pic hides the Buddy List)
You will notice the Keystrokes to use at the end of the line.
I am not sure where you mean you are clicking on a Red button in your last paragraph - unless you mean you are clicking on the iChat icon in the DOCK when it displays a red blob with a number to say how many text messages you have not read there are.
It is possible to have a chat with a Buddy from a List that is Hidden and clicking the iChat icon should bring the Chat window to the Front rather than make the Buddy List appear.
Unfortunately I do not have a Buddy free at the moment I write this to check the variants.
8:03 PM Sunday; June 29, 2008 -
Jabber and calendar integration
Hi,
I've got two types of Jabber client deployment - on prem and cloud based (this is the old webex connect, not jabber for telepresence). Both have different issues with calendar integration.
On prem Jabber:
1. Presence status is passed to Outlook
2. Calendar appointment whilst they do show up within meeting tab on Jabber client, the status of the client doesnt change to "In a Meeting" during appointments.
Off prem Jabber:
1. Presence status is NOT passed to Outlook
2. Calendar appointments works fine - ie show up in the meeting tab, and status changes correctly.
I have modified AD attribute proxyaddress for on prem clients to SIP:samaccount@cupdomain, I've assumed that for off prem clients, it would be SIP:email@domain as used by login details. I cant seem to find any documentation about calendar integration with webex connect clients.
Any ideas?
ThanksHi Elena,
Is it same machine where Outlook integration works with on-prem? If not, there are few things that you could check:
Uninstall other IM clients
Check if any other IM client with Outlook integration has been installed. Many other clients use the same api’s to integrate with Microsoft products and maybe blocking Jabber Click to X. If any other product is installed please uninstall and reboot your machine.
Some applications known to affect Jabber presence integration are: Cisco WebEx Connect, Microsoft Office Communicator, Microsoft Lync, CUCIMOC, CUCILync, Standalone Click to call, Cisco Unified Personal Communicator 8.x.
Registry settings
Confirm the following registry settings exist and are correct:
32-bit machines
Key: HKEY_CLASSES_ROOT\CLSID\{8885370D-B33E-44B7-875D-28E403CF9270}\TreatAs
value (REG_SZ): (Default) = {83CE44B6-A512-4199-9766-38357A9108E8}
-Jabber sets this on install; it replaces the existing class ID with ours
Key: HKCU\Software\Microsoft\Office\12.0\Common\PersonaMenu
value (REG_DWORD type): Enabled = 1, EnablePresence = 2, RTCApplication = 3, SetOnlineStatusLevel = 2, ShowStatus = 1
-Office creates these values on install.
Key: HKLM\Software\Microsoft\Office\Outlook\Call Integration\IMApplication
value (REG_SZ): IMApplication = CiscoJabber.exe
- Jabber sets this value on install, this key is created when office is installed
Key: HKCU\Software\Microsoft\IM Providers
value (REG_SZ): DefaultIMApp = Cisco Jabber
- Jabber sets this value on install
Key: HKCU\Software\IM Providers\ Cisco Jabber
value (REG_DWORD): UpAndRunning = 0 (not running), 1(starting), and 2 (running)
- This key is set by Jabber you do not need to create or manually edit this Registry Key.
- If jabber is running and this key is not set to 2 then there is problem, gather a prt.
64-bit machines
Key:HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{8885370D-B33E-44B7-875D-28E403CF9270}\TreatAs
value (REG_SZ): (Default) = {83CE44B6-A512-4199-9766-38357A9108E8}
-Jabber sets this on install; it replaces the existing class ID with ours
Key: HKCU\Software\Microsoft\Office\12.0\Common\PersonaMenu
value (REG_DWORD type): Enabled = 1, EnablePresence = 2, RTCApplication = 3, SetOnlineStatusLevel = 2, ShowStatus = 1
-Office creates these values on install.
Key: HKLM\Software\Wow6432Node\Microsoft\Office\Outlook\Call Integration\
value (REG_SZ): IMApplication = CiscoJabber.exe
Key: HKCU\Software\Wow6432Node\IM Providers\Cisco Jabber
value (REG_SZ): Friendly Name = Cisco Jabber
value (REG_SZ): GUID = {83CE44B6-A512-4199-9766-38357A9108E8}
value (REG_SZ): ProcessName = CiscoJabber.exe
Key: HKCU\Software\IM Providers\Cisco Jabber
value (REG_DWORD): UpAndRunning = 0 (not running), 1(starting), and 2 (running)
- This key is set by Jabber you do not need to create or manually edit this Registry Key.
- If jabber is running and this key is not set to 2 then there is problem, gather a prt.
If all is in order, then open a support case with Cisco TAC and provide logs as below:
Enabling Outlook logging
Setting this registry data enables logging for the presence features that integrate between Outlook and Jabber, and shows additional information in Outlook and Jabber. To set this registry key, do the following:
Click Start, and then click Run.
In the Open box, type REGEDIT, and then click OK to start Registry Editor.
Navigate to key: HKEY_CURRENT_USER\Software\IM Providers.
Create DWORD: OfficePresenceLogging with Value: 1.
If it does not exist already, manually create %userprofile%\Tracing directory, otherwise the log files will not be created.
Restart Outlook.
The log file is created in the %userprofile%\Tracing folder and the file name will be OfficePresence-#.log (where # is an integer). The last modified date will indicate which file is the latest.
Create a Jabber Problem Report (PRT)
Recreate the issue.Do this by opening the email\SharePoint page that shows the problem, select an example user, show their contact card.
Take screenshots of the issue and record time stamps.
Take note of the User names and email address\IM address of the problem users.
Go to your Jabber client and select Help > Report a problem, and then follow the steps to produce the problem report.
Thanks,
Maqsood
Uninstall other IM clients
Check if any other IM client with Outlook integration has been installed. Many other clients use the same api’s to integrate with Microsoft products and maybe blocking Jabber Click to X. If any other product is installed please uninstall and reboot your machine.
Some applications known to affect Jabber presence integration are: Cisco WebEx Connect, Microsoft Office Communicator, Microsoft Lync, CUCIMOC, CUCILync, Standalone Click to call, Cisco Unified Personal Communicator 8.x. -
Adobe Flash Player and Shockwave crashing has disabled my computer
I have downloaded a second flash player and it is still the same. Firefox has been crashing daily for a few weeks. I noticed that your adblocker plus was updated 6/4. Since then I have almost no use of firefox, because the Adobe flash player 13.0.r0 and Shockwave crash notices are constantly popping up. Could that update have something to do with why the flash players are not working? Below are an example of the crash details.
Thanks for the help. I prefer your browser, but this has made it non-functioning.
In trying to fix it, a window came up that asked would I like to change it back to a previous working image, which was Windows XP. Although this computer is Windows 7, I clicked the box yes, and said I wanted it to work like Windows XP. I see in your Operating System below, that it reads Windows Xp, but this computer is actually Windows 7. I can't find that menu to change unclick and change it back, so that it is working as Windows 7.
Problem Event Name: APPCRASH
Application Name: FlashPlayerPlugin_13_0_0_214.exe
Application Version: 13.0.0.214
Application Timestamp: 5359c61d
Fault Module Name: StackHash_27eb
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 6c2b92cd
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 27eb
Additional Information 2: 27eb358fe674a6f15dafe56d42bb9bf3
Additional Information 3: 2f06
Additional Information 4: 2f06c18113e6d7c00e6b91fa1fde84b6
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtAdBlock Plus isn't maintained or connected to Mozilla as they didn't develop it. ABP and Flash don't interfere with each other except on same cases that ABP blocks Flash content.
You can Try disabling Hardware Acceleration. <br>
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
If that doesn't work try Try to disable Protected Mode in Flash 11.3 and above by adding the line ProtectedMode=0 to the Flash "mms.cfg" file located in one of these locations: [46]
(Windows 32bit) C:\Windows\System32\Macromed\Flash
(Windows 64bit) C:\Windows\SysWOW64\Macromed\Flash
For example, on a Windows 7 64-bit system, open the C:\Windows\SysWOW64\Macromed\Flash folder, copy the file "mms.cfg" to the desktop, open it in Notepad, add a new line <code>ProtectedMode=0 </code> and then close Notepad, saving your changes. Next, go back to the C:\Windows\SysWOW64\Macromed\Flash folder, rename the original file to "mms.cfgBAK" (to save it as a backup) and then drag and drop in the modified "mms.cfg" file from the desktop. [47] [48] [49]
Note: To re-enable Flash Protected Mode, either restore a backup of the original mms.cfg file, if you saved one, or else re-edit the mms.cfg file to remove the <code>ProtectedMode=0 l</code> line you added. Updating Flash Player or installing a newer version does not automatically re-enable Protected Mode
Flash has been a pain since day 1 and Mozilla is currently working to replace Flash with Shumway. Unfortunately it's in the Nightly channel, doesn't come activated automatically and it isn't quite ready for normal usage. I just tested Nightly yesterday with Shumway and it wouldn't play. -
What's the Difference Between Flash Player and Shockwave?
Hi,
I was wondering what's the difference between Flash Player
and Shockwave? And how do you know which one isn't working? I
downloaded and installed Flash Player successfully but it did say
that the plug ins might be in another file and may not work
properly. There is one game that will work, but most everything
else doesn't. I don't get pictures (like adverts, ect.) in my
email. What is the problem?I have found this site helpful. Adobe has a "Test Adobe
Shockwave & Flash Players" site. Here is the address:
http://www.adobe.com/shockwave/welcome/ -
i can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!
Apple dropped playback support for .swf formats in QuickTime almost ten years ago.
Adobe Flash Player is the only way to view them.
Maybe you are looking for
-
Fill with blanks(spaces) a VARCHAR2 type
Thanks in advance, I have a VARCHAR2 type rtesta's var of length x(100 char) how i can fill(write) it without create a other varchar2 var that it'll be only filled with blanks(spaces). e.g rtesta := ' PC'||fil1||'xxx||fill2.... where fil1 = say 10 sp
-
Not using the most recent checked in version of the web app DLL in Release build
Hi folks Got some peculiar behaviour - I have three build configurations set up within VS2K13 for Debug, Release and DebugOnLive. There are some basic XML transformations to update emails, db-settings etc - all very simple and working. Needed to do a
-
Batch change creation date meta data in Bridge?
In Lightroom i can change the meta data on multiple files to be increased by say 2 minutes and all the creation times are adjusted. Can this be done in CS4 bridge???
-
Oracle OVD: adapter configuration - restrict bind by memberOf
Hi, thanks for reading! I'm getting started with an Identity Management project whose first phase will involve OVD. One of the project's identity sources is ActiveDirectory. I've experimented with creating an adapter in OVD which connects to an AD so
-
I installed the trial version of Adobe Photoshop cc 2014 successfully but when I try opening it failes: what can i do?