Jabber can not enter the PIN for voice mail

I installed Cisco Jabber 8.6 on the android mobile,And registered jabber to CUCM8.0. In the same time, CUCM8.0 integrated with Unity Connection8.0 via SCCP, Everything is normal.
Tested using any of a telephone call Jabber, it can received voice mail, and shows have a voice mail on the android mobile. then, Hear the tone of the Connection system :"please enter your PIN." However, in any case the PIN can not be submit to the Unity Connection, System reminded over and over again:please enter your PIN.......
I guess the mobile's dial pad can not be supported by Unity Connection, Or other reasons.
help!!!

The Android client is a SIP device and uses RFC2833 for DTMF relay. Unity Connection supports RFC2833 when integrated with either SCCP or SIP. The first question that comes to mind: is the call invoking a transocder/MTP that would be in the media path? For example, if Jabber is using G.729 and you haven't enabled that on CXN or you're requiring a TRP.
I would start with a Wireshark capture from the CXN server to see: a) what the far-end IP address is for the RTP packets; and, b) whether you see the RFC2833 packets arrive. If the sender IP isn't the Jabber client a media resource got invoked which may be dropping the RFC2833 packets. If the IP is correct but you don't see the RFC2833 packets arrive you could then run a Wireshark or collect SDI logs with SIP stack trace enabled from the CUCM node that Jabber is registered to. That would allow you to see the SDP negotiation at call setup to see if RFC2833 even gets negotiated.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Why do I can not hear the siri's voice on my iphone speaker anymore, why do I can not hear the siri's voice on my iphone speaker anymore

why do I can not hear the siri's voice on my iphone speaker anymore, why do I can not hear the siri's voice on my iphone speaker anymore

All apps - all paid and free apps include DRM protection that is tied to the iTunes that was used to download the apps. This means you have apps on your iPhone that were downloaded with your daughter's iTunes account. Apps cannot be transferred or merged with another iTunes account.
Delete the apps from your iPhone that were downloaded with your daughter's iTunes account to prevent being prompted for the account's password when there are app updates for the apps downloaded with the account. An iTunes account cannot be deleted.

Can not view the code for views, triggers or table definition

Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
Thanks

Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
Note: @mac.com and @me.com Apple IDs can not be renamed. If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
From here > http://support.apple.com/kb/HT5622?viewlocale=en_US
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

Step by step, how did you arrive at seeing this agreement?

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

Hi Djmontanalv,
Please go through the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Regards,
Anand

I can not get the download for indesign to work

I can not get the download for indesign to work.

Perhaps this Adobe Help document may help you:
http://helpx.adobe.com/creative-suite/kb/download-install-trials.html?t2

Why my iphone screen can not open the key and can not enter the menu

why my iphone screen can not open the key and can not enter the menu

Your issue is not clear - are you saying your phone is disabled and/or you forgot the passcode?
http://support.apple.com/kb/ht1212

I can not enter the crs administration lost the password.

I can not enter the crs administration lost the password.
How could retrieve the password to enter the administration interface crs?
Please help me,
Natalia

For versions prior to version 8, there is a procedure to do this. You'll find the details documented in this thread:
https://supportforums.cisco.com/message/3196728#3196728

I can not install the firefox for android from the android market. It is showing me that the app is incompatible with my device. Mine is LG P500 with version Froto 2.2.2. Any help ?

I can not install the firefox for android from the android market. It is showing me that the app is incompatible with my device and no other information is provided. I am not sure whats the problem with that ! Is it incompatible with the device or the android version ?
Mine is LG P500 with version Froyo 2.2.2. Any help ?
I was waiting to surf web with firefox from my phone for a long time. can anyone please let me know any known solution to it.

The mobile version of Firefox for Android requires a processor that supports the ARMv7 architecture, the LG Optimus P500 does not meet that requirement, it supports the ARMv6 architecture.

Why i can not download the appradio for my ipodtouch 2g firware 4.2.1

Why i can not download the appradio for my ipodtouch 2g firware 4.2.1 i need that app for sync to my car audio pioneer

What happens when you try?
Have you tried downloading it to your computer and then syncing it to your iPod?

I have a compaq 6200 pro i can not find the driver for SM bus controller.

I down graded the 6200 pro with the i3 chip to winXP and now I can not find the driver for the SM bus controller does this system have a sm bus controller?

Hi: Please click on the device in the device manager. Then click on the details tab. Post the top string of characters you see. Those will identify the type and model of the missing device and I can send you the link to the drivers. It is either your AMT driver, TPM driver or IMEI driver. In the meantime, install the chipset driver and reboot if you have not done so already. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=5037900&prodNameId=5037902&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-88640-1 Paul

I can not find the password for my keychain

I can nor remember the password for my local keychain. How do i change this?
Thanks.

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 4
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
Rename login.keychain to "login-old.keychain".
Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Delete the login keychain from the keychain list in Keychain Access. Choose Delete References when prompted, not Delete References & Files.
Select
File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Run Keychain First Aid again. Quit Keychain Access.

When adjusting the date of a photo I can not enter the year

When in I photo , and I need to adjust the date of the photo that I have scanned in, I go to that drop down menu and try to enter the year but can not do so.

I go to that drop down menu
Which menu would that be? Have you tried the Photos ➙ Batch Change ➙ Date menu option? That menu option should add the Image Capture date to the EXIF data for the photo.
OT

I can not run the depreciation for particular asset which was not acqustion

Hi Masters,
                 I have created asset master in july 2010 when i did purchase that asset, but i did not post the asset aqusistion in f-90 up to january. but on remianing all assets i did run the depreciation job on every month. Now in january , i have openend the posting periods from july to march and post that asset aqusisition f-90 in july psoting period., we are using april to march fiscal year.
                  when i am trying to run depreciation job repeat run in afab in test mode from july to december   it showing the error message that, depreciation already done for that proper periods. But in janauary when i am trying to run in test mode, It showing total depreciation amount from july to january , and it hit to only in january month but not to july to december each months.
Now i want to psot the deprectiation for each month of july onwards to january 2010.
    pelase reply how to do run deprecaiton for that particular asset for each month for july to january

Hi
Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
REgards
Malathi

Jabber can not enter the PIN for voice mail

Similar Messages

Maybe you are looking for