Jabber Client for Windows. Desk phone control trouble.

Good day!
I have CUCM - version 9.1.1.20000-5, JFW version 9.2.3 build 4417 and Microsoft AD server.
I have configured:
1. LDAP directory in CUCM using SSL connection
2. LDAP authentication in CUCM using SSL connection (port 636) too.
All other configurations, needed for allowing CTI control from JFW to desk phone, are made.
So, the problem is: CTI control in JFW is not available in this case. But, if I change in CUCM LDAP authentication from SSL to non-SSL - all work fine. JFW establishs CTI connection and successfully controls my desk phone, when LDAP authentication does is non-SSL.
Does anyone have any ideas why this is happening?

Hello, usually this is fixed by changing to global catalog for authentication (3269) since I would suppose that the issue you're experiencing is an LDAP timeout.
Please remember to rate helpful responses.
--Josh

Similar Messages

No Jabber client for Windows Phone 8.1

Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

Cisco Jabber Client for Windows 9.7 Can't Connect to Other IPSec VPN Clients Over Clustered ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Jabber client for windows mobile.

Hi ,
One of my customer want to install jabber in windows mobile. I informed him there is no client released for windows mobile yet.
But he wants any document from cisco site that there is no release available for win mobile. I tried searching same but could not get any.
Can someone pls provide me some cisco doc on this.
Thanks in advance.
Siddu..

There is no doc that will you tell what platforms we do not support, we tell you which platform we DO support.
If he insists on a doc, he cannot ask for what does not exist.

Is there a jabber client for windows users that's working?

hello all,
i've just deployed os x server 10.5 (standard configuration, upgraded to 10.5.3) and i have some users that are using ms windows. i can't seem to get google talk or any other windows jabber clients to successfully connect to the ichat server. i've tried to use the same server settings that i'm using when i create a new jabber account in ichat with google talk and a few others with no success. am i missing something? does anyone know of a windows jabber client that is currently working? if so, can you also share with me your findings (the settings or best practices for setting up this windows jabber client). the os x server ichat docs state several times that google talk should work. but after some research here, it looks as if it doesn't current work. any insight would be greatly appreciated.
thanks,
tsul
Message was edited by: tsul

I think Pidgin is the solution for you. It's quite easy to configure and seems quite reliable! It works well for me. I have use a portable version of it to connect from Windows XP/2000 to a 10.5.3 Server.
http://www.pidgin.im/

Jabber Client for Windows video not working with ManyCam

Hi everyone. We've been kicking around the Cisco Jabber client and I've noticed a small issue when it comes to video. I use a software package called ManyCam (http://www.manycam.com/) which creates a web cam that allows me to put effects on my actual web cam's video feeds. Primarily I use it when I'm in a remote office and have a video stream back to the main office I can put effects on the screen like "On a conference call" and such so people won't get upset when they approach me and I fail to respond to them. I use it with other applications just fine but with Cisco Jabber (v9.2.0 Build 496) when I attempt to set it the ManyCam camera as the video source in the video configuration of Cisco Jabber the preview doesn't appear. As well when I connect to another Cisco Jabber user they do not see my video stream.
Anyone else notice this? Or does anyone else have a link to some similar software that will give me equivalent functionality to ManyCam that works with Cisco Jabber?
Thanks!

Only if they are on a Mac using iChat(gmail account).
Have a look at http://mail.google.com/videochat

How to create a VPN client for Windows Phone 8.1?

We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?

The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

CUPC 8.6 Desk phone control

Currently running CUCM 8.6 along with CUPS 8.6. Currently we are able to get the softphone to register and make calls, but we can not get deskphone control. When we look at server health on the CUPC client, we just keep seeing "Connecting" and the correct servers are identified. We do have the user set in CUPS with the CTI_Gateway application profile, we have the phone associated with the user, in CUCM, we have the user in the correct end user call manager groups, and we have the line associated with that user. Not sure what else we are missing here.
Matt

Matt,
In all my experience with troubleshooting CUPC Desk Phone control issues the "connecting" message in the help show server health typically points to a CTI Manager login failure. There is an easy way to confirm this:
Enable detailed logging on the client, restart it and try to obtain desk phone control. Immediately create a problem report. In this report you can go to CUCSF-XXXXXXX -> Client Services Framework -> Local Settings -> Logs -> CiscoJtapixx.log (select the most recent one based on timstamps).
You will see the following sequence of messages:
com.cisco.cti.protocol.ProviderOpenRequest
com.cisco.cti.protocol.ProviderOpenResponse
com.cisco.cti.protocol.ProviderOpenCompletedEvent
In the Provider Open Completed event you will more than likely see an error message in the failure description. This typically is a simple failure or a directory login timeout.
If this is the case the most common cause is due to the LDAP Autheentication settings on Call Manager. Typically people are using 389 which can not respond in time and cause these timeouts. I recommend trying to use port 3268 (the global catalog port). If you need to change this LDAP setting you will need to restart the CTI Manager service on all nodes for it to take effect.
If you have issues diagnosing the problem, don't hesitate to post the problem report.
Regards,
Jason

CUPS CUPC Desk Phone control & features

Hi,
We are doing the POC with CUCM , CUPS , OCS RCC integration. I want to clarify some of the features using Desk phone control.
CUCM - 7.1.2
CUPS -8.0.0 , CUPS 7.0
OCS R2
CUCM CUPS are integrated and features soft phone , desk phone , IM , IPPM , LDAP are working fine.
1) In desk phone mode , CUPC A is call with CUPC B ( soft phone or Desk Phone) . In that time CUPC C will able to the Phone status of CUPC A
such as Busy , Idle like the Presence status in the phone ?
2) In the OCS RCC i'm able to call from the MOC to the Phone , but for incoming call there is no pop up from the MOC ?
3) OCS FQDN should be resolved in the CUPS ? ( test.domain.com)
4) From the MOC is it able to see the User Phone status as mentioned in the 1st Point.
Thanks

1) DNS entry is really required in the CUPS towards the OCS server ( ex ocs.lab.com)
[Michael] Technically, it will work without DNS. Tweaking might required. Since you already have OCS entry in DNS, you may just point your CUPS to the DNS server. That'll make thing's easier.
2) When the incoming call to the RCC phone , OCS will pop up the Incoming call to the MOC.
[Michael]Yes.
3) How important MOC RCC plugin we have to install in the MOC? how its work with MOC ?
[Michael] MOC RCC plugin is only required when the Line URI in Active Directory cannot uniquely identify a phone device and a line. For example:
Scenario 1: shared-line across multiple devices
Line URI is "tel:1234;phone-context=dialstring". If there's only one phone with DN 1234, you don't need the plug-in. Otherwise, you may
a) Use the plug-in to choose the phone you want to control.
or
b) Change the Line URI to "tel:1234;phone-context=dialstring;device=SEPAABBCCDDEEFF" (then you don't need the plug-in)
Scenario 2: same DN in different partitions
Line URI is "tel:1234;phone-context=dialstring;device=SEPAABBCCDDEEFF". If there's only one line on phone SEPAABBCCDDEEFF with DN 1234, you don't need the plug-in. Otherwise, you may
a) Use the plug-in to choose the phone you want to control (even though there's only one device)
or
b) Change the Line URI to "tel:1234;phone-context=dialstring;device=SEPAABBCCDDEEFF;partition=partition1" (then you don't need the plug-in)
Michael

Jabber Client for CME license

i have CME 2921 ISR router and i need to implement cisco jabber client for 50 user
is this needs a license or not
if yes, please provide me how to orser it and what is its part number
thank you very much

If you are going to use Jabber, that counts like a regular SIP Phone, just like 7945, or 99XX phones, you don't need an additional license:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

Cisco Jabber Client for Linux

Are there any plans to have a Cisco Jabber client on linux?

Mike,
The larger body of use case and development for Jabber has centered on Windows and mobile iOS and Android devices. That's not to say that there isn't a contingency of customers that want a Linux client but, as of today, there is no "Jabber" client for that platform. However, I've heard this question asked in a few different forums and the answer thus far has typically been one or both of the following:
1) There is a Jabber SDK, which could potentially be used to custom develop an application.
2) Use 3rd-party XMPP client (e.g. Pidgin)
As for an official answer on "will there be in the future" with a yes/no/maybe and/or a possible timeframe, you would need to reach out to Cisco or your trusted partner as roadmap items cannot be discussed without having a non-disclosure agreement in place. That's what Jamie is getting at in his response.
D. Hailey
NetCraftsmen, LLC.

Instant client for windows

When instant client for windows:
http://otn.oracle.com/software/tech/oci/instantclient/index.html will be available?
Thanks.

Now, it seems :)
Thinking about it, I later downloaded Client CD from:
http://otn.oracle.com/software/products/database/oracle10g/htdocs/winsoft.html
On the Select Install Type page we have as the first choice: InstantClient
New Installations (9 products)
Oracle Client 10.1.0.2.0
Oracle Instant Client 10.1.0.2.0
RDBMS Required Support Files for Instant Client 10.1.0.2.0
Oracle ODBC Driverfor Instant Client 10.1.0.2.0
Oracle C++ Call Interface for Instant Client 10.1.0.2.0
JDBC/OCI Common Files for Instant Client 10.1.0.2.0
SSL Required Support Files for InstantClient 10.1.0.2.0
Oracle JDBC Thin Driver for JDK 1.4 for Instant Client 10.1.0.2.0
Oracle Instant Client Required Support Files 10.1.0.2.0
Maybe it's not quite complete after all, or Oracle just forgot to update the Instant Client main page...

Oracle Client for windows.

Hi,
I just downloaded the Oracle 10g client for Windows.I cant figure out whats the next step.I was expecting to see a .exe file and kind of an installation wizard which would guide me through the process.In the instant client that I downloaded,I see 2 files:
adrci and genezi.
I think I am in the wrong place.Please advise.
Thanks

The file you downloaded should be a large .zip file (almost 500 meg).
Unzip it (with directories intact).
Then at the top level directory you should see setup.exe (or something like that).

Jabber Client for Windows. Desk phone control trouble.

Similar Messages

Maybe you are looking for