Jabber Client on Samsung S3 mini (GT-I8190) cannot register on CUCM 9.1

We have a BE6000 running with CUCM 9.1 and Desktop Phones, Windows Jabber, iPhone Jabber and iPad Jabber are all working.
Now i wanted to register a the Samsung S3 mini (GT-I8190) with Android 4.1.2 and get always the message "Connection failed." - i can ping the CUCM Server from the Phone (it's connected over AnyConnect Mobile Secure Client) and the profile seems to be configured correctly - even tried with another profile and the same error.
The Jabber IM is working fine on the device, just Jubber (Voice) is not working
Baseband version is I8190XXAMD3
Kernel version is 3.0.31-1154865
Build number is JZ054K.I8190XXAMD3

H,
yes i already did that. but when i used the same credentials on a galaxy note 2 i was able to login successfully,

Similar Messages

Cisco jabber for android crashes on samsung s5 mini when proxy is configured

We are a facing a strange problem with samsung galaxy s5 mini, android 4.4.2 and the latest Cisco Jabber client available on play store.
Cisco Jabber crashes on startup every time because in the wifi connection we manually configured a proxy.
If we disable the proxy in the wifi settings, cisco jabber works!!
No traffic is passed to proxy, we also tried to configure a non-existent proxy and Jabber crashes again...
Any help would be appreciated!

Hi Edgar
How does this phone work with the Jabber ?
I have a customer which about a dozen of these phones and it only vibrates on incoming calls but doesn't ring.
Same Android version : 2.3.6 -
Regards
Andri

IPhone Jabber Client Video Calls Unavailable

I'm having trouble getting my iPhone to make video calls. I can make video calls via J4W with the same CUCM/IM-P cluster, and my iPhone Jabber client is having no problem getting IMs, presence information, or making standard voice calls, but when I go to "Settings - Audio and Video", it simply has a message that says "Video is currently unavailable"
The "Dual-Mode for iPhone" device in CUCM has video calling enabled. What other settings could I be missing?

You would want to get this tested in iPhone 4s and above. check this portion of the document;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/iOS/9-6-1/ICG/JABI_BK_C9AC3244_00_cisco-jabber-for-iphone-and-iPad-961/JABI_BK_C9AC3244_00_cisco-jabber-for-iphone-and-iPad-961_chapter_010.html#JABI_RF_V35F2388_00
Device Requirements
Device Support
Cisco Jabber for iPhone and iPad is available from the Apple App Store.
Cisco supports Cisco Jabber for iPhone and iPad on the following iOS devices:
iTouch 5
iPhone model 4, 4S, 5, 5C, and 5S
Note
Video call is not supported for iPhone model 4
iPad second, third, fourth generation, iPad mini with Retina display, and iPad Air
The device must be able to access the corporate network using Wi-Fi or VPN.
Device Operating System Support
iOS support: iOS 7

Jabber client status on call / meeting

hi
i have configured jabber clients for mac 8.6.5 and windows 9.1 with our new cups 8.6.4 server
i have enabled calendar integration and this is working really well
too well :-)
if i have a meeting from 2-3pm my status changes to "in a meeting" but when i pick up the deskphone the status remains in a meeting rather than on a call. if my calendar has no meetings and i pick up the phone it changes the status to on a call.
this is slightly annoying as you often have scheduled meetings (by phone) for 1 hour but are actually only in the meeting for 45 mins, so if the phone status (on a call) could over ride the calendar status that would be better imho. as people may think you are still attending this meeting but you are actually available, nobody will edit their meeting if it finished early
or is this something that can be configured, i guess i can turn off the calendar integration but it does have its merits so would rather not do so
many thanks

Unfortunately the user is still having the status update issue after isntalling the 9.0.5 release.
When the user with this issue is unable to answer her extension, we then have it setup so that others in her department can see the call and answer her extension. Is it possible that this might be why the status is still showing she is on a call when she isn't?
It appears the setup explained above is not the problems. Other users are now reporting the incorrect status in 9.0.5 as well.

Jabber client on android devices.... Xoom maybe?

Im playing around with the Jabber client on my Samsung Epic 4G and it works great. Connects to my Cisco wireless, CUCM 8.x and makes calls like it should (in the office)
I have a Xoom, and got jabber loaded on it. Connected it the same way. The problem is there is no default phone.apk app for the xoom (wifi only).   So when the jabber app goes for a keypad request or phone, its not there.
Anyone seen an android app to default for keypad or dialer app, whatever you want to call it?    Im merely testing and playing around with this, nothing for production, but wanted to see if it would work.
Cheers!

Hey man! Well, no worries. Im sure everything with Cius first, then other android tablets coming.   At least NetFlix is working now on the Xoom

A list of supported Android Phones for Cisco Jabber Client.

Hi there,
I opened a discussion before about the Cisco Jabber Client for Android phones.
This product from Cisco is only official support bij a several mobile Android telephones. (very poor)
As everyone knows is that the mobile market is continious in development. Since a half year the official support phone list is still the same, but a lot of new Adroid phones are now on the market.
It's even so worse that some of the Cisco supported phones, are not available anymore in the market.
- Samsung Galaxy S2 becomes a Samsung Galaxy S3
- Samsung Galaxy TAB is still there
- Samsung Galaxy S (are not available anymore) The S1 or S Plus are now becoming the Samsung Galaxy S Advanced.
At what are the alternatives?
Still the list on the documentation is out-dated.
See:
Samsung Galaxy S International (GT-I9000) with Android operating system (OS) Version 2.2.1 or 2.3
Samsung Galaxy Tab International (GT-P1000) with Android 2.2.1 or 2.3
Samsung Galaxy S II (AT&T) with Android 2.3
To use Cisco Jabber for Android on the Samsung Galaxy S device, it is important that you upgrade your handset OS to Android Version 2.2.1 or 2.3. See the manufacturer/carrier site for more information about how to update the OS on your device. Minor voice quality issues may be experienced depending on the device used.
So hopefully Cisco is still working on the Cisco Jabber solution, and a lot of mobile Android phones will be supported so the road to success will be open.
Hopefully someone can help me to list of tested and supported phones (Official bij Cisco)
Kind regards,
Edgar

The official list of tested Android phones is what you've already discovered. With the next release of Cisco Jabber for Android, I'm sure it will be updated.
While the official list of what we tested is short, the client will work on many Android devices and TAC will provide support if you run into technical issues; provided the issue is with the Cisco Jabber client itself, and not with the OS of the manufacturer.
If there is a specific Android phone you are looking to have officially tested by Cisco, PM me with that information and I'll work with you to see what we can do to get it added.

Softphone feature for Cisco Jabber Client

Hello everyone,
I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
   Soft Phone Server
Server Address:           cucm02.mycompany.net
Server Port:                     2748
Server Protocol:           --
Device:                               --
Line ID:                               --
Status:                               Disconnected
Any help or thoughts on this would be greatly appreciated! Thanks!
Tony

Aaron,
Here's the bit I found interesting from the reporting function:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- begin:
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Select error
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - TFTP_Error Can't get packet, retrycount=3
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CTFTPClient::Get -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] - CTFTPClient::ReceiveData -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::getCnfFile -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CCUCMClient::downloadConfig -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] - CPhone::setPhoneMode -- end!
-- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] - CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
Thanks,
Tony

Jabber Client softphone is "No Connected"

Hi,
I am trying to setup a lab for cisco partner testing. I created Collab 10.5 topology with cucm & cups 10.5. I am running out of ideas of what could be wrong. My jabber client for windows works with deskphone but it does not work with it's softphone (CSFXXXXX). Yes, i have CCMCIP profile created, user & device associated but still does not work both within lab network or external network
I am seeing the error below when I do a show connection status for the softphone - see attachment
Connection error. Ensure the server information in the Phone Services tab on the Options window is correct.
I do not have the "Phone Accounts" under options. I even uploaded jabber-config.xml file to tftp server and still no phone accounts tab. I can ping the cti hostname & ip from the pc i am working.
SOS
TIA
Jeya

Actually, I read it on a thread in this community. I just went thru’ the deployment guide and I saw that section too. I have uploaded it to the tftp server and no change for the phone tabs. Only the Directory service becomes online after uploading that file but no change on the phone account tabs. Below is the contents of the jabber-config.xml file that I generated using the file generator tool:
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Options>
   <StartCallWithVideo>false</StartCallWithVideo>
   <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
</Options>
<Phone>
   <TftpServer1>hq-cucm-pub.abc.inc</TftpServer1>
   <CtiServer1>hq-cucm-pub.abc.inc</CtiServer1>
   <CcmcipServer1>hq-cucm-pub.abc.inc</CcmcipServer1>
</Phone>
<Policies>
   <EnableSIPURIDialling>true</EnableSIPURIDialling>
   <DirectoryURI>mail</DirectoryURI>
   <ServicesDomainSsoEmailPrompt>OFF</ServicesDomainSsoEmailPrompt>
</Policies>
<Presence>
   <PresenceServerAddress>hq-cups.abc.inc</PresenceServerAddress>
</Presence>
<Directory>
   <ConnectionType>1</ConnectionType>
   <PrimaryServerName>directory.abc.inc</PrimaryServerName>
   <BDIPrimaryServerName>directory.abc.inc</BDIPrimaryServerName>
   <ServerPort1>389</ServerPort1>
   <BDIServerPort1>389</BDIServerPort1>
   <UseWindowsCredentials>0</UseWindowsCredentials>
   <ConnectionUsername>Administrator</ConnectionUsername>
   <BDIConnectionUsername>Administrator</BDIConnectionUsername>
   <ConnectionPassword>1vtG@lw@y</ConnectionPassword>
   <BDIConnectionPassword>1vtG@lw@y</BDIConnectionPassword>
</Directory>
</config>
Thks!
Jeya

No Jabber client for Windows Phone 8.1

Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

Jabber client cannot login when primary IMP is unavailable

Hi
We have 2 x IMP 9.1 servers in cluster and Jabber client running. Current Jabber client work since we use IMP primary IP for login. When primary IMP server becomes unavailable, Jabber client seems cannot login anymore.
How can we fixed this?
Fei

http://en.wikipedia.org/wiki/SRV_record
The jabber deployment and installation guide has all the details of the SRV records that Jabber uses.
You can also google how to configure SRV records if you need further instructions.

Jabber client can't control deskphone

We have CUCM 9.1.2 and Presence 9.1 and Jabber for windows 9.7
Am facing issue with Jabber client for windows can't control desk phone as well as LDAP directory search is not happening.
Configuration part everything seems to be alright and verified.
CTI controlled device is there on user and phone also user associated with device . DN associated with user. I can login to Jabber client, then directory search is not happening also cant control desktop phone.
Here i have attached the problem screenshot as well as report file, wireshark report from client PC.

Hi,
I had same issue with version 9.7 of Jabber for Windows and CUCM 9.1.2, I use EDI for integrate Presence and LDAP for Jabber for Windows and BDI for Jabber iPhone and iPad, try with this:
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Presence>
<PresenceServerAddress>z.z.z.z</PresenceServerAddress>
</Presence>
<Directory>
<DirectoryServerType>EDI</DirectoryServerType>
<PrimaryServerName>x.x.x.x</PrimaryServerName>
<ServerPort1>389</ServerPort1>
<UseWindowsCredentials>0</UseWindowsCredentials>
<ConnectionUsername>[email protected]</ConnectionUsername>
<ConnectionPassword>password</ConnectionPassword>
<BusinessPhone>ipPhone</BusinessPhone>
<SearchBase1>OU=Users,DC=dominio,DC=com</SearchBase1>
<PhotoUriSubstitutionEnabled>true</PhotoUriSubstitutionEnabled>
<PhotoUriSubstitutionToken>sAMAccountName</PhotoUriSubstitutionToken>
<PhotoUriWithToken>http://y.y.y.y/photos/sAMAccountName.jpg</PhotoUriWithToken>
</Directory>
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDIPrimaryServerName>x.x.x.x</BDIPrimaryServerName>
<BDIPresenceDomain>domain.com</BDIPresenceDomain>
<BDIServerPort1>389</BDIServerPort1>
<BDIConnectionUsername>[email protected]</BDIConnectionUsername>
<BDIConnectionPassword>password</BDIConnectionPassword>
<BDIUserAccountName>sAMAccountName</BDIUserAccountName>
<BDIBusinessPhone>ipPhone</BDIBusinessPhone>
<BDISearchBase1>OU=Userss,DC=domain,DC=com</BDISearchBase1>
<BDIPhotoUriSubstitutionEnabled>true</BDIPhotoUriSubstitutionEnabled>
<BDIPhotoUriSubstitutionToken>sAMAccountName</BDIPhotoUriSubstitutionToken>
<BDIPhotoUriWithToken>http://y.y.y.y/photos/sAMAccountName.jpg</BDIPhotoUriWithToken>
</Directory>
</config>
Then erase folder CSF under C:\Users\Example_user\AppData\Roaming\Cisco\Unified Communications\Jabber
and C:\Users\Example_user\AppData\Local\Cisco\Unified Communications\Jabber
Restart machine and setup Jabber for windows again.
Regards

Can't connect with Windows Jabber client

Dual environment with Xserve authenticating to Active Directory domain controller. iChat is setup and is working for Mac users using Adium and iChat. However I cannot get any Jabber clients for Windows to authenticate. Both Pidgin and Psi error - "Authentication failed - no mechanism available".
All accounts are Active Directory accounts (Mac & Windows).

Hello again.
Try this. Stop the iChat Server. Using a text editor edit the file /etc/jabberd/c2s.xml Look for the section that talks about <mechanisms> Disable ( comment out thus <!-- and --!> ) all apart from <cram-md5/> for and <digest-md5/> and restart iChat server again.
As you gathered - forward and reverse DNS's have to be correct.
Tim

Video Not Viewable from Jabber Client To SX20

Good morning,
We are testing out the jabber for Windows client and the only way that we can get it to connect is by forcing the H323 protocol (ie:H323:[email protected]) and initiating from the SX20. When we do this, we can only see and hear what is going on at the SX20 and the SX20 shows no audio / video from the Jabber client.
We we try to connect directly to the SX20, it says that the device is offline.
Is the jabber client able to support audio and video over H323 ?
Thank you

Hi Jesse,
In order for this to happen you would either need to register your SX20 to a SIP provided service like Cisco Webex Telepresence or obtain and configure your own VCSe and register your SX20 against that. The VCSe would then require to have a SIP SRV DNS record setup. You may also need a valid cert installed on the VCSe from here:
https://supportforums.cisco.com/docs/DOC-23938. However, this may not be required if you are not going to use TLS.
Regards,
Jason

AOL Contact in Jabber Client

Has anyone been able to successfully set up an AOL Contact on their Jabber client?
I'm using Jabber 8.6.4 for Mac and whenever I specify my wife's AIM account name and select the checkbox for "This is an AOL account", then click the "Add" button, I get no feedback from the application on whether it failed or succeeded. She reports not receiving an invitation request to her account.
Are AIM and AOL Contacts different things? Is there something else that needs to be setup? Is this feature not working yet in 8.6.4?
DB

The ability to add users who are not AD users is coming in Jabber 9.1. The tentative release date for this is Sept but that is subject to change.
- Colin

Voice recording for jabber client

hi,
is there any voice recording solution for the jabber client via expressway E?
seems there is no solution around, is it not supported?
is it possible to use TCS to record the calls made by external jabber client?
thanks.

1. Use span (no span-less\Bridge_option) ports (via "expressway c e" from outside)
2. Use span-less\Bridge_option and VPN access to connect from outside (without expressway).

Jabber Client on Samsung S3 mini (GT-I8190) cannot register on CUCM 9.1

Similar Messages

Maybe you are looking for