Jabber connection to Presence server /softphone issue

Hello community,
Can i get some help with Cisco Unified Presence (8.6) working with Cisco Jabber for MAC (9.2.1)? So here is the scenario, we are currently moving away from Cisco WebEX, so i needed to configure our Cisco Presence server to be able have our Mac user login to Cisco Jabber so that they can use the phone. Currently i have configured CSF device on the Call Manager, which is working fine when i login to Cisco Jabber with my WebEX account, it allows me to define my phone device and login information, once connected i am able to make calls with my Cisco Jabber client.
Now that i have configured my presence server, i have reset my jabber so that i can point to my presence server which seem to work for my account, but i am unable to get another account to work. It allows me to sign into the presence server, but under the “Call Preferences” tab, it is not picking up my phone device. It shows alias as Computer (Software Phone) but the area is grey out so i am not able to make any changes.
On my account that is working this area would should my device “CSFXXXXX” the device that i have created in CM.
Also for the account that is not working, it is working if i login with the WebEX credentials and manually set the phone device in the Call preferences.
Hope someone can guide me in the correct direction.
Regards,
Allan

I found my error. I needed to add the user to the CTI profile.
Regards,
Allan

Similar Messages

AGPM - Changed password on AD account - now can't connect to AGPM server - SPN issue?

I inherited a kind of complicated AD structure.
There is an AGPM server in our forest root - AGPMServer.example.biz. The AGPM service is running as example\AGPM. If I log onto the server that hosts AGPM, I can connect no problem.
My workstation is in us.example.biz. I have AGPM installed on my workstation pointing to AGPMServer.example.biz. I had no problems connecting until a few days ago. Now I get the following error -
Failed to connect to the AGPM Server. The following error occurred: A call to SSPI failed, see inner exception. system.ServiceModel.Security.SecurityNegotiationException (80131501)
From what I can gather, this is an authentication failure.
us.example.biz ALSO has an AGPM service account, us\AGPM. I reset the password on this account shortly before I started having the issues connecting, so I am pretty sure they are related.
us\AGPM has 2 SPNs - AGPMServer/AGPMServer.example.biz/us.example.biz and AgpmServer/AGPMServer.example.biz/example.biz.
When I attempt to connect to AGPM Server from my workstation, it fails twice, so I think it is attempting each of the 2 SPNs.
Does anyone have any idea what I need to do to get the authentication to work again? I haven't made any changes in example.biz or to the example\AGPM account. I don't know how to get it to connect again.
Any help is appreciated.

Hi Chris,
Thanks for posting in the forum. There is a dedicated AGPM forum. In order to get better help, it's recommended that we ask for suggestions in the following AGPM forum.
Microsoft Advanced Group Policy Management
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdopagpm
Best regards,
Frank Shen

Solution to iCloud "cannot connect to the server" upgrade issue

I have just switched my iPhone 4s to a new carrier. (iOS 7.0.4)
Once the previous carrier (finally) unlocked its activation grip, all went well through restoring the phone. One issue remained:
iCloud wanted me to "agree to new terms of service" and would not allow me to do anything else with it. But when I tapped the button to "read the terms of service" the dialogue "Cannot connect to the server" popped up.
The solution turned out to be relatively painless:
Make sure you have backed up any Photo Streams that are present on your iPhone. (I use Aperture for this.)
At the bottom of the iCloud settings screen (Settings->iCloud) tap the "Delete Account" button. You will be warned that photos, documents, etc., will be deleted from your iPhone. As long as you are confident of your backups, tap "Delete" in the warning dialogue.
If you have "Find My iPhone" enabled, you will need to enter your Apple ID and password to turn it off. This is the only way to gain access to this setting that I could find.
Cold-boot your iPhone (Power + Home). I suppose you don't HAVE to do this, but seemed like A Good Thing.
Return to the iCloud settings screen and turn iCloud back on. Enter your Apple ID and password. Double-check that "Find My iPhone" is enabled, if desired.
You will be asked to allow iCloud to merge documents, contacts, and so on with the information on your iPhone. Do this as desired. (I do not yet use iCloud for most of this.) Your Photo Stream will eventually show up again by itself.
Hope this helps, and I'm all ears if there is an easier and potentially safer solution!
Matt

I have the same problem. Did you solve it already?

Cisco Jabber for Mac, possible without a Presence Server?

Hi all,
is it possible to use the cisco jabber client for Mac without a presence server in the uc environment? A customer is looking for Voip Client/Softphone for their Apple Macs. Instant Messaging is no requirement.
Regards
Steffen

WIlliam,
I belive he could use a Webex Connect account, IPSec VPN, and a CSF device in CUCM to achieve what he is looking for. Though it is a shame that he would need to have Webex Connect to do this just to be able to login to Jabber...
FYI:
I just tried out the CUP integration with Jabber for Mac with my customer with CUCM 8.6.2(a), CUCXN 8.6.2(a), and CUP 8.6.1 HA. It seemed to work ok (I was using VPN as well). For some reason the directory service said it failed yet I could search for people in the directory and it worked fine (strange...). I think this may be because the XCP Directory Service on both CUP servers will not start (not sure why because I do not seem to need it).
My only complaint is that I originally had Jabber for Mac installed for Webex Connect integration. There appeared to me, that there was no way to re-run that original wizard (I looked all around in the package contents...) and select Cisco Presence instead of Webex Connect. To get around this I used AppCleaner to remove Jabber, re-download from Cisco, and re-install, this time selecting the Presence option. Once I tested I had to rinse-repeat to get my Webex Connect back because that is what we use internally. Hopefully they fix this because it makes it hard for us engineers to test Presence integration during installs.
Opinion on Jabber with Webex Connect:
I love it for creating Instant Meetings - It sends an email instantly to me that I can forward to attendee's right away (most of time not with contacts otherwise I would do it that way).
I love the new iPhone app that was just released as well. Very cool. (Do not like how you cannot be logged into both though, not a big deal, Archives of chats are my biggest concern). It is a pretty seemless login/logout from iPhone to Mac and Mac to iPhone though, which I appreciate.
I have no desire for Phone Services or Voicemail integration so it is annoying that it always says at the bottom of the buddy list "Server or port unreachable". I assume that you need to be connected to VPN in order to have connection to CUCM to use the CSF device... Jabber 8.6 Release Notes says that Jabber is not supported with NAT without VPN
Also the Chat History is weak on Mac, and none existent on iPhone . Would be cool if history was built in like CUPC or Lync, doesn't require going to Finder to view, and messages would archive on server.
Plus we use Exchange UM for our Voicemail so not sure how that would integrate with Webex Connect. I believe Exchange Voicemail in Jabber would work with Presence integration though (which is puzzling but I guess it is because you can do all of those XCP external integrations in CUP. However, don't get me started with CUP/Exchange calendar integration and CUP not supporting SAN certificates with multiple hostnames on Exchange...
Thanks for the info on X-Lite and Bria, I may try out these options. I have been using CIPC through VMWare Fusion and it worked quite well. I believe I needed to install Virtual Audio Cable for the sound to work correctly. I use it through Fusion's "Unity" function and it looks like it is native!
Just my 2 cents. Let me know what you think.
One more thing (SJ):
Check out this site for Mac Apps for Engineers:
http://ciscovoiceguru.com/2071/mac-app-cisco/comment-page-1/#comment-2760
Ryan

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status

Acrobat Connect Pro LMS 7.5 server cache issue - displaying old content

Our Adobe Acrobat Connect Pro server is showing old Captivate-created content from about 4-6 weeks ago.
I loaded 35+ sets of Captivate 3 (SCORM 1.2, HTML, zipped) content onto our Acrobat Connect Pro LMS about 6 weeks ago.
I converted all training content from Captivate 3.0.1 to 4.0.1, 4 weeks ago by opening each file in Captivate 4 and following prompts to "Save As" new files with different file names.
I reloaded all content 4 weeks ago, and again 2 weeks ago.
I reloaded about half of all content again last week.
End User Acceptance testing performed this week showed that most of the courses are showing old content, ranging from 2-6 weeks old
Attempted fixes and workarounds:
Deleting content entirely and reloaded from scratch - this will not work long term, as we lose usage data each time we reload completely new files.
Contacted Adobe, provided times to track incidents of the issue. We reached Tier 2 - who told us it was our problem and that everything appeared to be working fine from their side.
New workaround - load new content and reattach course to new content. This presents the same long term issue as the first workaround, but enables us to retain older versions of content in the system, should we need to revert or report on it.
Gaining server side access is a bit challenging due to the hosting situation we have, so I am looking (ideally) for a solution that can be performed from the Administrator/Author Frontend. However, I want to learn the real cause of the problem, wherever it might reside, so that it can be properly corrected and avoided in the future. I am calling this a server cache issue, as it seems the server has somewhere retained unwanted old versions of content, preventing current content from being displayed to end users. Viewing content as an end user = see old content. Viewing content from the Content area (Author view) shows the current files, so I know they are on the server and are loading correctly, up to a point.
I am preparing all content for another round of loading/reloading due to other issues and updates, so republishing and reloading all 35+ files into the LMS is unavoidable at this point.
This issue is keeping our LMS from launching to several thousand users across the country, so any suggestions or helpful tips are much appreciated.

I think I have isolated the source of this problem. It's the Pitstop Professional 9 plug in. I un-installed this, and everything opens quicker than greased lightning. I re-installed it and it's back to slowsville.
Unfortunately Pitstop is essential to my workflow.
Until recently I did my pre-press on a Mac G5 with Acrobat Pro 7 and Pitstop 6.5. I never had this problem with slow file opening. But it seems that the delays would occur when I used the plug-in with large complex files.. So it would open files as fast as you'd expect from an elderly machine. But starting to use Pitstop would result in a prolonged period of staring at a spinning beachball.
I wonder is there any way to stop the Pitstop plug-in from initializing until it is used? So the plug-in stays inert until you select the tool from from the menus.

Connect to server/computer issues

When I am using my Macbook Pro at work, it will attempt to connect to my iMac at home (which is unavailable). It only tries to connect to this computer when I am in Desktop and Screen Saver preferences.
When I am at home (and the iMac is available) it will load a message asking me to connect to the iMac.
I am unable to workout why or what it is looking for.
Does anyone know how I can tell my Macbook to forget about looking for the computer in all environments?
BTW: It has done this constantly under 'Snow Leopard' and 'Lion'

Bah63 wrote:
I am trying to run a server for Team Speak application. I have a WRT54GS v.5 router. I have been to MANY sites tryin to resolve the issue, printed a hundered pages and tried the fixes. I am relatively computer literate except when it comes to networking issues. I can connect to my server and another computer on my LAN can connect, but no one outside the LAN can. It is currently runing in DHCP mode(router). I guess I have to have a static IP and do port forwarding for port :8767. I have 3 IP addresses and don't know which to use. I have my LAN IP, WAN IP and the router has it's own IP,subnet mask and default gateway as seen by external users of the internet on the status tab/internet/configuration type/Ip address. I would GREATLY appreciate ANY help I could get.
here are a few things to keep in mind.
1.) your wan ip is what the world would point to.
2.) your lan ip is your ip address
3.) your gateway is what your computer sees your router as, and is what it uses every time you google "team speak".
4.) the security tab has a feature "Block Anonymous Internet Requests"
this is enabled by default, "a good thing" which is part of why you
people in the world cannot "see" your server.
5.)the "Applications & Gaming" and tab is a relevant part of why you cannot get anyone to connect your teamspeak from the world. once you have configured the portwarding as required in the below link, you should be able to get this to start working.
http://www.goteamspeak.com/index.php?page=faq&id=4&item=16#q16
6.) the DDNS tab provides the means for you to have a "quasi-static" address for people to connect to your server.
Please review item 5 and try again. post your results if you are having problems.Message Edited by ispugnacious on 07-03-2006 04:29 PM

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log file

<b>WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log file</b>
          We are using WLS 7.0.4 - One of JMS connection factory setting in admin console we selected "Server Affinity" options.
          We see this messages appear in Weblogic log file,
          ####<Apr 24, 2006 1:56:53 AM EDT> <Error> <Cluster> <liberatenode4.dc2.adelphia.com> <node4_svr> <ExecuteThrea
          d: '4' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <000123> <Conflict start: You tried to bi
          nd an object under the name sbetrmi2 in the JNDI tree. The object you have bound from liberatenode2.dc2.adelp
          hia.com is non clusterable and you have tried to bind more than once from two or more servers. Such objects ca
          n only deployed from one server.>
          and then,
          ####<Apr 24, 2006 1:58:12 AM EDT> <Error> <Cluster> <liberatenode5.dc2.adelphia.com> <node5_svr> <ExecuteThrea
          d: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <000125> <Conflict Resolved: sbetrmi2 for
          the object from liberatenode5.dc2.adelphia.com under the bind name sbetrmi2 in the JNDI tree.>
          Should we use 'load balancing option' instead of 'server affinity' ?
          Any thuoghts?
          Thanks in adv.
          Vijay

Test Reply
          <Vijay Kumar> wrote in message news:[email protected]..
          > <b>WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log
          > file</b>
          >
          > We are using WLS 7.0.4 - One of JMS connection factory setting in admin
          > console we selected "Server Affinity" options.
          >
          > We see this messages appear in Weblogic log file,
          > ####<Apr 24, 2006 1:56:53 AM EDT> <Error> <Cluster>
          > <liberatenode4.dc2.adelphia.com> <node4_svr> <ExecuteThrea
          > d: '4' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
          > <000123> <Conflict start: You tried to bi
          > nd an object under the name sbetrmi2 in the JNDI tree. The object you have
          > bound from liberatenode2.dc2.adelp
          > hia.com is non clusterable and you have tried to bind more than once from
          > two or more servers. Such objects ca
          > n only deployed from one server.>
          >
          > and then,
          > ####<Apr 24, 2006 1:58:12 AM EDT> <Error> <Cluster>
          > <liberatenode5.dc2.adelphia.com> <node5_svr> <ExecuteThrea
          > d: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
          > <000125> <Conflict Resolved: sbetrmi2 for
          > the object from liberatenode5.dc2.adelphia.com under the bind name
          > sbetrmi2 in the JNDI tree.>
          >
          >
          > Should we use 'load balancing option' instead of 'server affinity' ?
          >
          > Any thuoghts?
          >
          > Thanks in adv.
          > Vijay

Issue while connecting to managed server through WSLT

Hi All,
we have one Admin Server and 6 managed server.
we are successfully able to connect to Admin server which is running on port 7001 but
when we are trying to connect to any of the managed server at port 8001 we are getting below error:
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : Error getting the initial context. There is no server running at t3://<host>:8001
Use dumpStack() to view the full stacktrace
Please let us know how to enable WLST to connect to managed servers.
Thanks

This was a silly mistake from my side.
Actually our server hosts multiple managed server on same machines using VIP.
hence using Alias in WLST connect command solved the issue,
Thanks.

Connect to server auth issues

Hello,
My company just moved to 10.7, and it used to be the case in 10.6 if I needed to connect to a server I could use user@servername if I wanted to authenticate as another user. It seems in 10.7 and 10.8 it is automatically using my currently logged in user only and it just ignores anything specified in user@. I can't find anything conclusive in Keychain Access, and it persist over mutliple machines so it's not my specific computer or user that has issues.
We are on an AD domain and this is happening over SMB and AFP.
thanks!

It's not even listed in the keychain access list. I tried to manually input it, but still to no avail. When I say I click somewhere else I mean I might click on my documents for example to drag something into the ftp server, but when i come back to the ftp it's just kind of stuck saying "connecting" and trying to reconnect does nothing but give me an error and trying to eject does nothing at all.

Connect to server authentication issues

Hello,
My company just moved to 10.7, and it used to be the case in 10.6 if I needed to connect to a server I could use user@servername if I wanted to authenticate as another user. It seems in 10.7 and 10.8 it is automatically using my currently logged in user only and it just ignores anything specified in user@. I can't find anything conclusive in Keychain Access, and it persist over mutliple machines so it's not my specific computer or user that has issues.
We are on an AD domain and this is happening over SMB and AFP.
thanks!

It's not even listed in the keychain access list. I tried to manually input it, but still to no avail. When I say I click somewhere else I mean I might click on my documents for example to drag something into the ftp server, but when i come back to the ftp it's just kind of stuck saying "connecting" and trying to reconnect does nothing but give me an error and trying to eject does nothing at all.

Mail can't connect to isp server. provider says it's an internal issue

mail can't connect to isp server. provider says it's an internal issue, mail is set up corectly.

Are connecting exclusively through IMAP or through POP? IMAP automatically stores all the e-mails on the server.
POP gets them onto your Mac. The advantage of IMAP, unless you desire, you are not downloading all the attachments to your hard drive, and bandwidth issues of downloading slowing you down with lots of large attachments are avoided. The other advantage with IMAP, you can try a web based e-mail to see if your e-mail program missed downloading everything. http://www.mail2web.com/ is my favorite web based e-mail. I recommend at least trying it to see if it will let you see your e-mail. Any custom folders will be invisible, but at least anything in your inbox should be visible and usable.
Are you using any other e-mail software for forwarding, such as gmail?

Cisco Presence Server 8.5 Application - Cisco Jabber menu option not available

                   Dear Support,
                   I am trying to configure cisco jabber with Presence Server 8.5. All the documentation indicate that jabber option in Presence must be configured in the Application -> Cisco Jabber menu, however this menu option is not available in my Presence Server. Anyone know why this is happening? I am using CUCM version 8.6.1. I installed the jabber client for windows in two Windows 7 machines and I have presence and IM funcitonalities but I can not make calls or activate other features like video, desktop sharing and so on.
                    Any help would be really appreciated.
                    Best Regards,
                    Roberto López.

Thanks a lot for pointing me to the right direction.
Just one more question. After installing jabber for windows on a couple of laptops and signing in, the call option (right click on contact or telephone icon located right to the contact) is not available right away meaning that I have to wait a long time for it to appear or if I start a call from the "search or enter number to call" field then all call button and options are enabled. Do you have any idea why this could be happening?
Best Regards,
Roberto.

There was an issue connecting to the server. please try again later. 124.

I'm trying to publish a site withdreamweaver as one of the 5 sites I get with my CC account using business catalyst, but I get the following error message "There was an issue connecting to the server. Please try again later. 124." whenever i try and connect which doesnt really help.
I'm logged in with the correct account in dreamweaver, and i have no issues publishing sites from muse using my CC account.

Hi Pirmin87,
There was a known brief outage a few days ago that could have resulted in this.
- http://status.businesscatalyst.com/
However at the moment everything should be connecting fine. If still an on-going issue please reach BC direct chat support for further investigation.
- http://helpx.adobe.com/contact.html?product=business-catalyst
Kind regards,
-Sidney

Jabber connection to Presence server /softphone issue

Similar Messages

Maybe you are looking for