Jabber error when sending normal text

It seems random but sometimes when I type a message to someone in jabber  I get embedded error saying "Cannot send the content you pasted" I am  simply typing in messages as you normally would. If I type the same  thing again it works. I just upgraded to windows 8.1. I have tryed  reinstalling the client although I think it is using the same local  config file (unless the groups you create store server side).

Did you try the latest Jabber version 9.2.6
This is opened as a BUG:
CSCuj34478
But is fixed in the above version
Sorry for the delay in replying
Tapan

Similar Messages

  • Long delay when sending normal text message

    Whenever I send a standard message, there is always a long delay (8 secs) before it sends. I know it is not aol because it is all the time. I am running 10.5.1 on my macbook with iChat 4. I have tried reinstalling ichat including removing all pref files. Still no luck. Any help would be great! Thanks.

    Today I started from my Firewire-device with 10.4.11 and had ichat running from there. I chatted with my friend, who is on 10.5.1 - no problems at all. (so my router is not causing the problem, as I thought)
    Starting from 10.5.1 again I opened up Activity Monitor and found this message every 10 secs !
    25.12.07 25.12. 15:18:29 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent[654]) Exited with exit code: 1
    25.12.07 25.12. 15:18:29 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds
    25.12.07 25.12. 15:18:39 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent[655]) posix_spawnp("/Library/Little Snitch/Little Snitch UIAgent.app/Contents/MacOS/Little Snitch UIAgent", ...): No such file or directory
    I remember that I installed Little snitch some time ago and removed it manually. Then today I run the official uninstaller for it. Still I cannot get rid of this activity. May be it has to do something with the text delay in ichat? How to delete all Little Snitch processes? How can someone find these data?
    Thanks for Feedback

  • How can i check my setting details are correct on my iPhone I recevied an error when sending a text this morning and while checking it out noticed my state and city are wrong

    How can i check my setting / about tab? This morning I got an error message say something wasn't safe (not sure what) I think it was my common name whcih is ch4iv.myvzw.com and while looking in there I noticed my state say NJ I live in PA, I did not buy my phone in NJ, the city says Bedminster I have never even been there. Can anyone advise?
    Can't I go on my Apple account and get to my setting / details.

    Here is the message...

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • RFC error when sending logon data

    Hi;
    We cannot configure the STMS of our development system. When we try to
    configure it, system gives an error message: Errors during distribution
    of tp configuration; TMS Alert Viewers tells us
    RFC_COMMUNICATION_FAILURE: RFC communications error with
    system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
    data and READ_PROFILE_FAILED:File
    erptest\sapmnt\trans\bin\TPPARAM
    could not be opened for reading (No such file or directory).
    Is there any advise for solution?
    Best regards
    Noyan
    PS: Please find the profiles below:
    START:
    #.*       Start profile START_DVEBMGS00_erptest                                                                                *
    #.*       Version                 = 000006                                                                                *
    #.*       Generated by user = BASIS                                                                                *
    #.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
    generated by R3SETUP
    SAPSYSTEMNAME = FKT
    INSTANCE_NAME = DVEBMGS00
    SAPSYSTEM = 00
    SAPGLOBALHOST = erptest
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    start database
    #_DB = strdbs.cmd
    #Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
    start message server
    #_MS = msg_server.exe
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    Start IGS
    Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
    start application server
    #_DW = disp+work.exe
    #Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
      General parameters for starting the system
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEM = 00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEMNAME = FKT
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #INSTANCE_NAME = DVEBMGS00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPGLOBALHOST = erptest
      Start database
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DB = strdbs.cmd
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
      Start message server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    MS = msgserver.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
      Start applications server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DW = disp+work.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    DEFAULT:
    SAPDBHOST = ERPTEST
    dbms/type = mss
    dbs/mss/server = ERPTEST
    dbs/mss/dbname = FKT
    dbs/mss/schema = fkt
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPFQDN = tr.delta.is
    SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
    SAPDBHOST = erptest
    SAPTRANSHOST = erptest
    DIR_TRANS =
    $(SAPTRANSHOST)\sapmnt\trans
    #DIR_TRANS = D:\usr\sap\trans
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    SAP Message Server for ABAP
    rdisp/mshost = erptest
    rdisp/sna_gateway = erptest
    rdisp/sna_gw_service = sapgw00
    rdisp/vbname = erptest_FKT_00
    rdisp/enqname = erptest_FKT_00
    rdisp/btcname = erptest_FKT_00
    rdisp/msserv = sapmsFKT
    rdisp/msserv_internal = 3900
    rdisp/bufrefmode = sendoff,exeauto
    login/system_client = 200
    #GUVENLIK PARAMETRELERI
    login/password_expiration_time = 90
    login/min_password_lng = 6
    #parameter created                          by: BASIS        25.03.2004 08:41:25
    rdisp/gui_auto_logout = 10800
    #parameter created                          by: BASIS        25.03.2004 08:37:47
    #old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
    login/fails_to_user_lock = 6
    #validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
    #parameter created                          by: BASIS        16.06.2007 17:35:41
    #old_value: 2
    #changed:  BASIS         14.05.2008  15:24:55
    auth/rfc_authority_check = 1
    #otomatik unlocki iptal eder
    #parameter created                          by: BASIS        10.11.2006 17:47:15
    login/failed_user_auto_unlock = 0
    #AUDIT PARAMETRELER?
    #old_value:                                   changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_day = 1996800000
    #old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
    #old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
    rsau/max_diskspace/local = 2048000000
    #old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
    #old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
    #old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_file = 665600000
    rsau/enable = 1
    rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
    rsau/selection_slots = 12
    #rec/client = ALL
    DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
    FN_AUDIT = ++++++++######..AUD
    #DIL PARAMETRELERI
    #Turkish codepage settings
    abap/import_char_conversion = 0
    install/codepage/db/non_transp = 1610
    install/codepage/db/transp = 1610
    zcsa/installed_languages = DET
    #zcsa/system_language = E
    zcsa/system_language = T
    zcsa/second_language = E
    install/codepage/appl_server = 1610
    #OS dependent
    abap/locale_ctype = Turkish_turkey.28599
    #DIR_PUT = D:\usr\sap\FKQ\upg\abap
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/msserv_internal = 3900
    #system/type = ABAP
    INSTANCE:
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPSYSTEM = 00
    INSTANCE_NAME = DVEBMGS00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
    icm/server_port_0 = PROT=HTTP,PORT=80$$
    SAP Message Server parameters are set in the DEFAULT.PFL
    ms/server_port_0 = PROT=HTTP,PORT=81$$
    #rdisp/wp_no_dia = 10
    #rdisp/wp_no_btc = 3
    #rdisp/wp_no_enq = 1
    #rdisp/wp_no_vb = 1
    #rdisp/wp_no_vb2 = 1
    #disp/wp_no_spo = 1
    rdisp/wp_no_dia = 12
    rdisp/wp_no_vb = 3
    rdisp/wp_no_vb2 = 0
    rdisp/wp_no_enq = 1
    rdisp/wp_no_btc = 3
    rdisp/wp_no_spo = 1
    #PERFORMANS PARAMETRELERI
    #parameter created                          by: SAP*         08.08.2001 10:30:18
    abap/fieldexit = yes
    #parameter created                          by: ALPER        13.10.2000 18:24:16
    install/collate/active = 1
    rdisp/max_wprun_time = 25000
    MEMORY_NO_MORE_PAGING dump nedeniyle
    #parameter created                          by: BASIS        27.12.2006 17:00:22
    rdisp/PG_MAXFS = 262144
    abap/heap_area_nondia = 2000000000
    rdisp/PG_SHM = 16384
    rdisp/ROLL_SHM = 32768
    #'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
    #Note 552209 - Maximum memory utilization for processes on NT/Win2000
    #parameter created                          by: BASIS        30.10.2007 10:57:24
    #abap/heap_area_nondia = 50000
    #parameter created                          by: BASIS        30.10.2007 10:58:54
    #rdisp/PG_SHM = 0
    #parameter created                          by: BASIS        30.10.2007 10:58:27
    #rdisp/ROLL_SHM = 625
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:57
    dbs/mss/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:33
    dbs/oledb/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:48:23
    dbs/oledb/add_procs = 8
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:29
    rsdb/esm/max_objects = 2000
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:03
    rsdb/otr/buffersize_kb = 4096
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:46:21
    rsdb/esm/buffersize_kb = 4096
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:18:14
    ztta/parameter_area = 16000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:43
    enque/table_size = 10000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:20
    gw/max_sys = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:01
    gw/max_overflow_size = 25000000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:15:19
    rdisp/max_comm_entries = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:48
    rdisp/tm_max_no = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:20
    gw/max_conn = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:13:42
    rdisp/max_arq = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:12:57
    ztta/roll_area = 3500000
    #parameter created                          by: BASIS        18.05.2005 09:20:25
    #old_value: 90                                changed: BASIS 18.05.2005 09:22:25
    rdisp/max_hold_time = 300
    #parameter created                          by: BASIS        20.08.2003 12:10:20
    #old_value: 6144
    #changed:  BASIS         03.01.2008  19:42:10
    rsdb/obj/buffersize = 20000
    #parameter created                          by: BASIS        20.08.2003 12:09:48
    #old_value: 6000
    #changed:  BASIS         03.01.2008  19:42:59
    rsdb/obj/max_objects = 20000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:42:11
    #old_value: 250000
    #changed:  BASIS         30.10.2007  10:56:17
    #abap/buffersize = 100000
    #changed:  BASIS         03.01.2008  19:40:36
    #abap/buffersize = 300000
    #by: BASIS 12.06.2008
    abap/buffersize = 400000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:41:32
    #zcsa/presentation_buffer_area = 20000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    zcsa/presentation_buffer_area = 30000768
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:55
    rsdb/ntab/ftabsize = 30000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:12
    rtbb/max_tables = 500
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:39:15
    #old_value: 20000
    #changed:  BASIS         03.01.2008  19:41:29
    #rtbb/buffer_length = 30000
    #64 bite gectikten sonra  by: BASIS 10.06.2008
    rtbb/buffer_length = 50000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:38:26
    zcsa/db_max_buftab = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:37:37
    #zcsa/table_buffer_area = 50000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    #zcsa/table_buffer_area = 89000000
    by: BASIS 12.06.08
    zcsa/table_buffer_area = 99000000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:54
    sap/bufdir_entries = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:12
    rsdb/cua/buffersize = 8000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:34:46
    #old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/sntabsize = 5500
    #parameter created                          by: BASIS        08.07.2003 20:33:56
    #note 103747
    #old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
    #old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/irbdsize = 11000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:32:18
    rsdb/ntab/entrycount = 40000
    #old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
    #old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
    PHYS_MEMSIZE = 4096
    #64 bite gectikten sonra   by: BASIS  10.06.2008
    abap/heaplimit = 40894464
    abap/heap_area_total = 2000683008
    ztta/roll_extension = 2000683008
    em/blocksize_KB = 4096
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/elem_per_queue = 2000
    #auth/auth_number_in_userbuffer = 9000
    #snc/enable = 0

    Hi Srikishan;
    You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
    Thanks for your help and interest
    Best regards
    Noyan

  • Error when sending message: 500 Timeout

    while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
    can any1 throw some light on this.

    Hi venu,
    you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
    there are two ways you can change it:
    1. check out note: 824554
    TCODE - rz10
    icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
    (for 800 seconds)
    8010 is my HTTP port so you have to change it:)
    2. SXMB_ADM -> configure integration server -> change specific identifiers
    runtime parameter:
    Parameter HTTP_TIMEOUT
    Meaning
    Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
    Personally I only changed the one from the instance profile but the second one should work too
    My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
    If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
    Let me know what u have done , if it works
    Thanks,
    srini

  • Test message from RWB: Error when sending message: 401 Unauthorized

    Hi Experts,
    While I am sending test message from RWB, I am getting following error:
    Error when sending message: 401 Unauthorized
    I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
    I am having SAP_ALL authorizations and few days back everything was fine.
    I think something wrong with configuration in XI but I am unable to pin point.
    Please help.
    Regards,
    Gourav

    Yes,
    but
    Role of Business System : Integration system
    Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
    How can I change it to Application system
    and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
    Regards,
    Gourav

  • RWB:Error when sending message: 404 Not Found

    Dear all,
    "i am getting error:      Error when sending message: 404 Not Found"
    while testing from rwb > Component Monitoring   > Non-Central Adapter Engines >  Adapter Engine AIPID > test message >
    with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
    sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
    and my id comm channel > target host > bid.xxx.com with service no
    (adapter type: xi
    adapter engine: Integration server
    address type: url address
    target host: bid
    service no: 8000
    path: /sap/xi/engine?type=entry
    i am working in nw2004s system)
    while testing cache connectivity test from rwb > Component Monitoring 
    i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
    green: Integration Repository
    green: Integration Directory
    green: Integration Server - JAVA
    red:Adapter Engine af.axd.aipid
    yello:Integration Server - ABAP
    Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError
    though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
    what should i do?
    best regards,
    dushyant.
    refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
    and
    SXI_CACHE
    @8O@ Error during last attempt to refresh cache
    LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
    Smq2 = 0
    Sm58 = 0

    Hi,
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Cheers
    Manish

  • Error when sending message: Method not implemented

    Hi, All:
    We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
    "Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
    Thanks
    Liang

    HI Liang
    Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
    Thanks
    Gaurav

  • HT4993 How do you turn the weird sound off when sending a text using the iPhone 4S

    How do you turn the weird sound off when sending a text using the iPhone 4S?

    Go to Settings-Sounds-Text Tone and change to None.  You're referring to the sound when posting a message to someone else, correct?  The only issue is if you set to none, you will not hear the incoming either.

  • Error when sending data request

    Hi All,
       i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from  ecc 6.0 . all of this schedule's showing  the status "error when sending data request" with the following details.
    status
    diagnosis
    the request idoc could not be sent to the source system using rfc
    system response
    there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
      in step by step analysis it is showing
       rfc to source system successful showing with ash status
       data selection successfully stated  and finished ? show with red status
    in that details tab
    request : showing with green status
    everything ok
    extraction :showing with red status
    missing messages
    transfer(idocs and trfc) : missing messeges
    processing(data packet) : no data
        it is showing technical status with red as processing overdue
                           processing step call to source system
       so it is showing error with 0 from 0 records.
    please any body could help me for solving this error.
    regards,
    naveen.

    Hi
    Seems you have connectivity issues between the Source system and Bi system.
    You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
    RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
    You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
    Much of BASIS Issue .
    Hope it helps and clear

  • When sending a text it sends but then i receive the sent message as a reply

    when sending a text it sends but then i receive the sent message as a reply

    Settings > Messages > Send & Receive > Start New Conersations From
    Tap whichever on you want to use.

  • Deleted cell number appears (along with the edited number) when sending a text.  How do I get rid of it?

    Deleted cell number appears (along with the edited number) when sending a text.  How do I get rid of it?

    It has nothing to do with iOS 6. It's always been that way. Given that it's been this way for so long, one assumes that Apple knows about it and has their own reasons for not changing it.
    Restore the phone as new, not from back up to delete the numbers. Or, wait until the cache gets overwritten.
    Best of luck.

  • Error when tranfering the text data

    Hi all
    I am getting an error when transfering the text data thru flat files .
    It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
    pls suggest me.
    thanks in advance
    karna

    here are teh steps:
    1) craete source system in BW as say Flat_file
    2) go to inforsource --?  create inforsource --> right clik on infosource and say assign datasource
    3) select flat_file here and say YES
    4) then for flat file, trnafer structure mapping has to be done manually. so in trs struc screen ,go to datasource tab and enter your corresponding infoobject.
    5) then  go to tranfer rule tab and propose the rule.
    If it helps, please assign points. In case of doubt, please get back
    Regards
    Pankaj

Maybe you are looking for