Jabber for ipad no video with CUCM

hello everyone
i ipad install the jabber for ipad client,everything is OK,i can regist to CUCM and i can call the phone ,can hear my voice mail,but i can't video call.
i call the jabber for windows,the windows no video and i also can't see the windows
i don't know how can i check ?

i use CUCM 8.62
and i install the COP cmterm-jabbertablet-100v10-dm.cop.sgn
here is my sip profile

Similar Messages

Jabber for iPad video issue

How can I troubleshoot video issues?
I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
Is Jabber for iPad going to support G729 and if so when?
Thanks,
Doug

Hello i have the same issue!
Someone find the cause for this issue?
Regards
Leonardo Santana

Webex Meeting Center and Jabber for Ipad support in Webex Telepresence

Hello, I have a two questions which are unclear based on my browsing of posts in this thread.
1) Are traditional Webex Meeting Center meetings able to be joined to a Webex Telepresence session? Ie. I have two callway/webex telepresence nodes (SX20 and a C40) can they have a webex meeting center participant brought in?
2) Is Jabber for Ipad supported using the Webex Telepresence service? Using the example endpoints above I have a SX20 and C40 and they want to add a Webex for Ipad endpoint in.
Thanks.

You cannot have Telepresence endpoints using Callway service(WebEx TP service) join a webex session directly. You can do this however using WebEx enabled Telepresence which is meant for on-premise users to work with WebEx
http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/config_guide/webex_enabled_telepresence/cts_webex_config.html
In the call way (aka WebEx tp service), the work around is you have to use an endpoint that has multi site capabilities to make one video call and see video from other end points and then make an audio call to the WebEx service and bridge them together. Now users can audio and video and presentation remains on WebEx but it's not like the true webex enabled telepresence which today call way doesnt support
See attached PDF last page. Also you may need a PSTN subscription to make that call happen

Jabber for IPad Directory Issue

Guys,
I'm been beating my head against this issue for the last couple of days and I think a new idea would be extremely helpful!
Problem: No Corporate Directory being shown at all.
Jabber for IPad client Version 9.1
CUCM 8.5
CUP 8.6(3)
Microsoft AD Environment
Every single other client I have can access the corp directory (Android, Windows, CUPC) and I'm getting Presence and Contact list on the jabber for ipad client. Can anyone maybe post a screenshot of the product specific device fields or offer a sugestion? I've followed the Admin guide, but have obviously missed something :/
Gareth

Hi Gareth,
I noticed this too. It depends on where you are searching from within the client.
If you are logged into the Presence Client - then your search is from the ldap profile assigned on CUPS to the end user.
If you are searching from within the CUCM portion of the client it uses the product specific section of the TABXXX client on CUCM
LDAP Server           FQDN.domain:389
LDAP Username     i have used the same one as for my LDAP directory Distinguisged Name\domain(without the ".local")
LDAP Search base     DC=xxxx,DC=local
LDAP field Mappings      mainPhoneNumber=ipPhone
we also have in the
"reserved" field the domain domain=xxxx.local
hope this helps
cheers
Stuart

Where do I find manuals for photoshop touch for ipad (not video tutorial)?

Where do I find manuals for photoshop touch for ipad (not video tutorials)?

The best way to get quickly acquainted with PS Touch is to do the built-in tutorials. There was a "quick start guide" of sorts, but as far as I know, they haven't updated it to reflect the latest version as of yet.

Jabber for iPad - BFCP support?

Hi All,
Can't find a reference to it anywhere but does or will the iPad support BFCP?
Thanks

Hello,
Regarding BFCP and content sharing from Cisco Jabber Video for TelePresence 4.8.6 on Windows to Jabber Video 9.3.9 for iPad clients.Jabber Video for TelePresence(Movi) cannot stop sharing presentation on the call.
I wish to know if what versions this is actually fixed in? I have read the release notes and I am still unable to find an answer.
I read in Cisco Bug Toolkit this is a known bug CSCup04761 and the only workaround is to disconnect the call.
CSCup04761 - Movi can't stop sharing main video presentation Symptom:Jabber Video for TelePresence(Movi) cannot stop sharing presentation on the call.
Conditions:When using Movi to share a presentation to an endpoint that doesn't support BFCP (such as Jabber for iPad).
Workaround: Disconnect the call.
Details Last Modified: Oct 9,2014
Status:Fixed
Regards
Nicholas

Rented video from iTunes for iPad but video is missing?

Rented video from iTunes for iPad but video is missing? Can anyone help

You're sure that it completely downloaded? There may be a downloads button at the bottom on the right side of the iTunes Store app if the movie did not finish downloading.
Did you look in there to make sure that it fully downloaded?
You can also search for it. Swipe down from the middle of the home screen to get to the search field at the top of the screen. Type in the name of the movie and see if it shows up. If it appears, you can tap on it and it will begin to play but that will also start the 24 or 48 hour timer that you get to watch a rental once you start it.
If you are not ready to watch the movie, don't tap on it. But if it shows up in the search, you know it's on the iPad so the next thing that I would do is reset the iPad and then look again in the videos app.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Unable to login with Webex Connect and internal VCS simultaneously on Jabber for iPad

Our users have downloaded the Jabber 9.1 client for their iPad, and we have Webex Connect accounts for IM, as well as internal VCS, TMS, Jabber Video accounts, and VCS Expressway. They install the client on the iPad, select corporate accounts, then go into Webex login information. They enter their credentials, go ahead and log into Jabber and see their contacts. On that screen, there is a box that says "set up Voice and video calling" so they click that, then go to Voice and Video calling, but the only thing thye can select is Jabber for Telepresence. They cannot select VCS on this screen, which would let them go into the VCS internal settings, etc. So if they select jabber for Telepresence, it asks for a username and password but that is all...so it's trying to register them to the free Jabber Video cloud. Is there some step we are missing? We ultimately want our users to be logged in with their Webex Connect accounts for IM, and have the video portion of the Jabber client pointing to our internal VCS Control.

The Data Structure that holds the Accounts, User&Groups information is on the Boot Drive. That Data Structure stays on the Boot Drive and cannot be moved, but you can change the Home Directory references stored in it to point to any other drives nearby. This changes where those files are stored.
Keep in mind that you are specifying EXACTLY where those Home Directories will be stored, and if the names of anything have changed, those Links do not point to the right places any more. (Example: you changed the Home Directory of user Joe to be on the drive named "Mavrix". Later, you renamed that drive to "Yo", without changing the pointers in User&Groups. Joe can enter his password, and it will be accepted, because the Accounts Directory that holds his password is on the Boot Drive. But Joe's Home Directory files will not be found, and he will get an error message about his Home Directory cannot be located.
If you use a different Boot Drive, it also contains a Data Structure that has Usernames and passwords, and they may not be the same as the one on any other drive.

Jabber for Windows Login failed with - "Must change at Next Login" for CUCM Authentication

Jabber for Windows users cannot login when "User Must Change at Next Login" is selected in the CUCM credential Policy
I found this Bug-ID: CSCuh84476
https://tools.cisco.com/bugsearch/bug/CSCuh84476
We use Jabber for Windows 9.7.4!
I just want to know if there are other users have the same problem and which workaround they applied.
I’m currently testing a User with different Policy credentials (Credentials expire after 1 day).
I think this will also lead to a “username or password wrong”-popup but tomorrow I will see it myself ;)
The planed workaround for us will be to set the “User Must Change at Next Login ” option and the users first have to login at UCM-Userpage to change their initial password.
BTW: Maybe somebody from Cisco know when this get fixed?
Best regards
Franz

J4W does rely very heavily on DNS, you should at least all required entries to hosts and lmhosts.
How are your servers defined under system -> server??
Are you able to log into UCMuser page??
Have you properly configured all user/device/line association, and created the necessary service profiles???

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

Quicktime corrupted for iPad 2 videos - no hand cursor controls

I have a 32-bit Dell XPS M1210 laptop and a 64-bit Dell XPS 435 desktop - both of which have had hard drives recently formatted and authentic Win 7 SP1 installed. Not much on either but IE8, Office 2003, HP Printers, Live Mesh, Avast, Google Earth and a few insignificant programs which are not common to both machines. Neither had ever had Quicktime installed until today since I just started rebuilding both. Wanted to watch the iPad 2 videos just posted. Downloaded current Quicktime, installation flawless.
Quicktime will not run properly on either machine. Same exact corruption problem on both despite 64 vs. 32 bit etc. The videos play, the black centered controls for Pause, volume etc. are there, however I cannot use them. Cursor blinks to a hand for a split second as I hover over controls, but then changes back to Arrow pointer and is not clickable anywhere on video. So, I can watch the video but can't pause, rewind etc. - no controls.
I have an old Dell XPS-410 Windows Prof. XP SP3 with Quicktime 7.69.80.9 which runs the videos perfectly, pauses controls etc.
Since the only thing in common with these two machines where Quicktime is corrupted is Win 7, I suspect problem may be centered there? I have tried uninstalling and reinstalling. If I go find OLD quicktime clips online which have the simple gray control bar at the bottom, they do work to pause etc. AFTER the clip finishes downloading.
Any help would be appreciated.
Ruth

The ipad is certainly no replacement for a computer/laptop.
It is used in conjunction with a laptop/computer. It is simply a big ipod/iphone.
I would not even consider the ipad for your needs.

Is zagg folio for iPad 2 compatible with iPad 3?

I found this deal online: http://www.zagg.com/j/promo/zfolio_freeprods/freebuds.php?gclid=CO-e5fC67K8CFQgD QAodrlh31w
In this deal, If I purchase an iPad 2 zagg keyboard case ($99) I get a free pair of zagg smart buds ($50). My current skullcrushers are nearly broken, as skullcandy is all for the design, not quality. I am very interested in receiving these in ear headphones. But I have an iPad 3, and I can't use this exact same deal if I buy an iPad 3 zagg folio. I have tried. After looking at the specs of each keyboard, I found that each Folio (iPad 3 and iPad 2) have the exact same specs:
iPad 3 folio specs:
Weight: 19 ounces (539 grams)
Keyboard only: 11.5 ounces (326 grams)
Folio only: 7.5 ounces (213 grams)
Length: 9.75 inches (247 mm)
Width: 7.625 inches (193 mm)
Depth: .9 inches (23 mm)
iPad 2 folio specs:
Weight: 19 ounces (539 grams)
Keyboard only: 11.5 ounces (326 grams)
Folio only: 7.5 ounces (213 grams)
Length: 9.75 inches (247 mm)
Width: 7.625 inches (193 mm)
Depth: .9 inches (23 mm)
I know for a fact that the iPad 3 is .6mm thicker then its prediccessor, and I compared my iPad 3 to my fathers iPad 2, and saw little tiny difference. It was litteraly the difference of the length of how much the glass pops out of an idevice if you look at it horizontaly.
The folios also have this in the specs section:
iPad 3 Folio:
COMPATABILITY
Works with Apple iPad 3 (3rd gen)
iPad 2 Folio:
COMPATABILITY
Works with Apple iPad 2
I know that the bluetooth technoledgy is the same on each device, both software and hardware versions.
I also know that online on stores such as Walmart, Bestbuy, Ebay, and Amazon all sell the Zagg Folio but they are marked as *For iPad 2 and iPad 3.
After doing a mock purchase, they do not ask you if you have an iPad 3 or 2. Meaning that they are in fact the same size?
Remember that I want to buy an iPad 2 folio for my iPad 3 because of the free $50 zagg buds that come with them at:
http://www.zagg.com/j/promo/zfolio_freeprods/freebuds.php?gclid=CO-e5fC67K8CFQgD QAodrlh31w

Yes, they're quite good. When I got the ZaggFolio for my iPad 3, it said ZaggFolio 2 on the box. Called them in a panic. They were very nice and explained that, as they never made a version for the original iPad, the ZaggFolio for the iPad 3 is the second version. Absurd but they were still very nice about explaining it and I didn't have to wait long on the phone, either.

Any suggestions for editing Music Videos with Multiclip?

Hi there. I have been reading about the new multiclip feature in FCPHD5. Sounds as if it would be perfect for editing a performance music video with multiple run throughs. In fact it almost seems too good to be true. I was writing to ask if anyone has tried this and what problems they encoutnrered or what workflow they could recommend. I haven't used multiclip before (or editied many music videos either) and would appreciate any suggestions.
This is my idea so far.
capture offlineRT the whole tape, make subclips with an angle setting of each take. Then edit the multiclip in a timeline which includes the song as an audio track. I thought I would synch with inpoints manually set to the beginning of the songs first riff in playback (as there was no clapper on set that day, curse them)
I have questions about onlining as well and how to make it a less tormenting nerve racking experience. Maybe its just me but the thought of trashing all the media, duplicating projects and recapturing makes me break out in a cold sweat. But I'll deal with that later.
Thanks for your thoughts, observations, suggestions.
Have a merry Christmas
Sincerely
Peter Stenhouse

The plan was to sync up the mixed PT audio to the video track. However the club screwed up the recording and I was left with using the audio from one of the tripod mounted cameras that I placed a stereo mike on.< </div>
General advice for live performances:
1. Depending on a computer to make the only recording is a silly idea. Use tape or a minidisk. Take a line feed off the main board and record it on at least one of the cameras.
2. There is nothing that will substitute for missing timecode better than a good countdown. Insist the band develop a creative visual and aural timing cue that all cameras and mics can see.
3. The most important part of shooting a performance or a lipsync gig for mulitcamera assembly is preproduction. The bugs, glitches and gotchas are all well known and thoroughly documented on thousands of band blogs.
4. There is no excuse to go into a location shoot unprepared and carrying a solid backup plan for all of the stuff that will go wrong.
5. A full, all-camera, all-personnel rehearsal is a good idea.
6. The band's lighting guy knows nothing about video. Give him some help or give him the day off.
bogiesan

After the new IOS for Ipad the words with friends app will not let me sign on (it says item I wish to buy is no longer available????) I uninstalled it but when I tried to install it still repeats (item you wish to buy...) Help

After downloading the new IOS for Ipad I cannot use Words for Friends from Ipad. I uninstalled it but when I try to reinstall it pops up with "item you wish to buy is no longer available".

I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.

Best settings for Green Screen Video with Canon Mark iii

HI
What are the ideal camera settings for Green screen video.
Iso?
aperature?
Depth of field settings (best to have the green screen a bit out of focus?)
Any other camera settings would be helpful.
Thanks
Rowby

Hi Rowby!
Thanks so much for writing in about green screen shooting with the EOS 5D Mark III camera. Green screen shooting can come down to some crucial elements and how well you handle the camera and the lighting.
Arguably the most important thing is to have excellent lighting on the screen. Without this, the keys used to replace the green screen will not be accurate. So hopefully you have a good set of lights you will be using to actually light the physical screen.
With regards to ISO, shoot as low as possible. We suggest that you stick in the ISO 200-400 range where possible. With good, high key, proper lighting on the screen this shouldn't be an issue.
Aperture should actually be in the higher end of the range, you would want to stick to apertures around f/8 and above. Again, with adequate lighting this shouldn't be out of reach. This is so the green screen is more in focus, versus having it out of focus, which would not yield successful results.
Use an appropriate lens to the subject, for example if you are doing wide shots- use only the focal length needed for the shoot and no wider. For head shots, close ups- use a lens that will get you close.
Following these suggestions should give you some pretty good results. Remember, if this is your first attempt don't be discouraged, green screen shooting can be difficult to accomplish.
We wish you the best of luck in your endeavor!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Jabber for ipad no video with CUCM

Similar Messages

Maybe you are looking for