Jabber for iPhone & iPad too long to connect to "Phone Services"

Hello,
Has anybody ever experienced delay issues with Jabber for iPhone and/or iPad to connect to "Phone Services"?
In my case, the service does connect but it can take about 1 minute. Some times it can be faster but some others it can take a while to make the service available.
Regards,

You've hit the nail on the head with your last sentence, though to me a month (and then another) to wait for a new line is nothing - I am on my fifth order with BT. They lost the first three, then tried charging me an arm and a leg in excess charges for the fourth. I am trying again, this time with a total package to see if they are a bit more useful when they actually know I'm not going to switch to another provider - fingers crossed.
If they do come back with massive excess charges again though this time I've done my homework. I now know the measurements between my property and the pole as well as the BT price list they use to calculate the charges. I've also worked out a cheaper route than the one they were suggesting - Ofcom say they should offer the cheapest route and the opportunity for the customer to do some of their own work but with me they didn't do either. They also didn't consider that we don't have reliable mobile signal here. They also didn't provide me with any details of how they'd come to that figure and just demanded it. I've had lots of advice from DEFRA, the Department for Business, Innopvation and Skills, Ofcom and ex-Openreach planners and should be able to get a line under the USO. I have a horrible feeling that I've done all this homework now though and they'll just come out and do it without demanding the excess, but if they do I am at least ready this time.

Similar Messages

  • If there is no driver for iphone S4, how do I connect the phone and PC?

    If there is no driver for iphone S4, how do I connect the phone and PC?

    With the special cable that came with the phone. You must install iTunes on your PC in order to access the phone, sync it, and back it up.

  • Jabber for IPhone/IPad and Anyconnect VPN

    I have just setup Jabber for iPhone and iPad in a CUCM 8.6/Presence 8.6 enviornment.  Works great when on my wireless network at work.
    The problem I have is that it doesn't work with Anyconnect VPN.  Running 8.4 code and can access the CUPS website from the iPhone/iPad when on vpn.  It just will not connect the Jabber clients.  I have attached the logs for review.
    There is only one difference in our wireless connectivity and VPN connectivity that I can think of at this point.  Could it be my DHCP configuration not offering option 150 for tftp on the VPN?  I am using a local pool on the ASA but it doesn't offer option 150 for tftp.             

    It's been a while so I don't recall exactly what I did.  That said: I want to say that I connected it via the wireless network to let it pull down it's configuration and after it pulled down the initial configuration I was good to go on VPN.

  • After updating to iOS 8.3, my iPhone 5 no longer can connect to cellular service

    After updating my iPhone 5 this morning to iOS 8.3, I am no longer able to get service. Upon rebooting the phone, or removing and replacing the SIM, it connects for about 30 seconds, then drops the network connectivity and is constantly 'Searching...', never finding service. I restored from my backup from the previous night before the upgrade, but that doesn't reset it back to iOS 8.2.
    I've contacted my service provider, but it doesn't seem to be on their end.
    What are my options here?

    This is strange because my wife's iPhone 5c did the exact same thing. In one day it was 536MB. The other weird thing is that this happened while the iPhone was not being used. She was at work during this time and her iPhone was off and in the back room. I did call AT&T to ask them about it and they didn't know what happened either. The most they did was to put a note on the account that if we go over our data limit that they will credit it back this month. I've been checking every couple of days and it hasn't happened again. I'm glad I'm not the only one but I wish that there was an explanation.

  • Jabber for iPhone force auto-connect

    Hello,
    Does anybody know if it is possible to force Jabber for iPhone/iPad to connect to a wireless SSID network as soon as it is available?
    We recently implemented Jabber and we are noticing that some times, users arrive to the office, where corporate SSID is available, but even if jabber is running on the background, it won't automatically reconnect to the network.
    User will have to manually open the application and wait for Jabber to reconnect.
    Is it possible to make this process automatic for the user?
    Regards,

    CUCM version is 8.6.2.
    Presence version is 8.6.4
    Jabber for iPhone & iPad is 9.6.2
    The issue is that if Jabber is running on iPhone's background, even if wireless connection is activated, it seems to disconnect. In order to reconnect, user has to manually open Jabber and wait for the connection to establish, especially to make calls.
    The same applies when a user is running Jabber, he arrives from outside to the company and wireless reconnects to corporate SSID. Jabber won't automatically reconnect until user opens the app.
    Regards,

  • Where is the documentation for Jabber for iPhone and iPad 9.6.1 ???

    Jabber for iPhone and iPad 9.6.1 was released on Tuesday Jan 14th 2014.
    I see the 4 .cop files on cisco.com  in a zip file copfiles_iOS96.zip. What is the difference between the 4 files?  Application in the AppStore on my iPad, but there are no release notes, or documentation on cisco.com.  All I can assume is that these .sgn files need to go on my Publisher/TFTP server?
    Nothing here about a 9.6.1
    http://www.cisco.com/en/US/products/ps11596/prod_release_notes_list.html
    iTunes
    https://itunes.apple.com/us/app/cisco-jabber/id467192391?mt=8
    cop sgn files
    http://software.cisco.com/download/release.html?mdfid=284288351&flowid=45930&softwareid=284006014&release=9.6%281%29&relind=AVAILABLE&rellifecycle=&reltype=latest

    I only see two COP files, one for iPhone (TCT) and one for iPad (TAB). These are required on older (can't believe I'm calling 8.6 older already!) builds of CUCM.
    Which other files do you see?
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Jabber for iPhone 6 - version 10.5 on iOS 8

    Hello All,
    Just wondering if anyone has the same issue as me. I had an iPhone 4S and use the current version of Jabber for iPhone with all services on it until yesterday when I got my iPhone 6. On the iPhone 6, however, I cannot get the client to register to CUCM. All other services including voicemail, and IM & presence work just fine - I just cannot make phone calls.
    THe error I get is "Failed to Get Device Configuration".
    Our organization is running CUCM 8.6, CUP 8.6, and Unity Connection 8.6 (upgrading soon :P)
    Just as an FYI, I am using an iPad 3 with Jabber 10.5 and can register just fine. Previous to getting an iPhone 6 it also, worked just fine.

    I am currently running jabber 10.5.0.189050 with iphone 4s ios 8.0.2  I have seen very little issue with this so far.  My backend cisco servers are at the latest 10.5 code (CUCM, UNITY, Presence,etc) along with latest version of expressway.  If you say you are not supporting this then what is currently supported as I have a large sales team that we are planning to deploy this to soon, mostly running iphone 5's and a mix of ios 7 and 8.  New employees coming in on iphone 6 and ios 8.0.2  If you can't tell me here then where to we find up to date accurate information.
             thank you ,  jeff magnuson

  • Jabber for iphone. Unable to register

    Hello,
       I am having problems to register my iphone client to CUCM.
       I am using CUCM 9.1.1 with last COP file installed and Jabber for iphone 9.1. I have followed all the steps according to the Admin guide
    1.- Change Service Parameters > SIP Dual Mode Alert Timer to 3000
    2.- Change SIP Profile and keepalive/register/subscribe timers
    3.- Crate device Phone > Add New > Cisco Dual Mode for iphone
          Device Name is TCTJOSEHER
    Assign a number  and associate to end user JoseHer
    4.- Associate device to user and associate CCM End user and CTI enabled permisions
    Standard CCM End User
    Standard CCM Gateway Administration
    Standard CCM Phone Administrator
    Starndard CTI xfer and conf
    Standard CTI... rollover
    Standard CTI Enabled
    After multiple attempts, i cannot register the phone.
    Looking to the logs it seems the phone try to register with no success
    [TCTConnectionManager ssaCallbackWithStatus:] Starting VoIP account
    -- 2013-06-20 12:25:41.055 DEBUG [3d73eb88] - [CSIPhoneManager switchToMode:] Already in mode CSIPhoneModeSoftphone
    -- 2013-06-20 12:25:41.056 DEBUG [3d73eb88] - [CSIPhoneManager setStatus:] Setting status from CSIPhoneStatusDisconnected to CSIPhoneStatusRegistering
    -- 2013-06-20 12:25:41.056 DEBUG [3d73eb88] - [CSIPhoneManager setSelectedDevice:] New selected device (null) using protocol --
    -- 2013-06-20 12:25:41.056 INFO [3d73eb88] - [TCSessionViewManager softphoneStatusDidChange:] Softphone status changed to CSIPhoneStatusRegistering.
    -- 2013-06-20 12:25:41.057 DEBUG [3d73eb88] - ##call count = 0
    -- 2013-06-20 12:25:41.060 DEBUG [3d73eb88] - -[TCTConnectionManager softphoneStatusDidChange:]
    -- 2013-06-20 12:25:41.061 DEBUG [3d73eb88] - [UMCVoipAccount setConnectionStatus]: Connecting
    -- 2013-06-20 12:25:41.075 DEBUG [3d73eb88] - UCM connection attempted over cellular in foreground
    -- 2013-06-20 12:25:41.078 DEBUG [3d73eb88] - [CSIPhoneManager registerClient:] tftpAddress: 10.200.1.167  mode: CSIPhoneModeSoftphone, devicename: TCTJOSEHER
    -- 2013-06-20 12:25:41.079 DEBUG [3d73eb88] - CSIPhoneHelper::setLocalAddress - Setting client IP address to 192.168.208.201
    -- 2013-06-20 12:25:41.087 DEBUG [3d73eb88] - CSIPhoneHelper::setCachePath - Setting phone cache path to /var/mobile/Applications/5ED6CCB8-FFB7-47A5-9D18-D78A5FB71A98/Documents/Caches/
    -- 2013-06-20 12:25:41.089 DEBUG [3d73eb88] - CSIPhoneHelper::registerClientByDeviceID - Registering with tftpAddress: 10.200.1.167 deviceName: TCTJOSEHER
    -- 2013-06-20 12:25:41.092 DEBUG [3d73eb88] - onNormalCapabilitiesUpdated
    -- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - -[CSIPhoneManager normalCapabilitiesUpdated:type:]
    -- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - [CSIPhoneManager normalCapabilitiesUpdated:type:] Received 0 for CAPA_CONV
    -- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - [CSIPhoneManager normalCapabilitiesUpdated:] self.status 2
    -- 2013-06-20 12:25:41.094 DEBUG [3d73eb88] - [CSIPhoneManager hangUpPendingCallForLostCapabilities:] ringingSessions count : 0
    -- 2013-06-20 12:25:41.141 DEBUG [3d73eb88] - [EMAccount connectionStatusDidChange]: Active voip account is nil. Update isEMServiceAvailable and isSignedIn.
    -- 2013-06-20 12:25:41.142 DEBUG [3d73eb88] - [UMCAccountManager connectionStatusDidChange]: post AccountManagerDidChangeConnectionStatusNotification for voip or otherServices change 0
    -- 2013-06-20 12:25:41.142 DEBUG [3d73eb88] - [UMCVoipAccountViewController updateCtiStatusOnConnectionChange] - #ctiEnabled deskphone: (null), ctiStatusString:Not Configured
    -- 2013-06-20 12:25:42.976 DEBUG [3d73eb88] - Analytics connection failed! Error - The request timed out.
    -- 2013-06-20 12:26:11.079 INFO [3d73eb88] - ...previous log message repeated 10 times...
    -- 2013-06-20 12:26:11.079 INFO [3d73eb88] - [CSIPhoneManager registrationDidTimeout:] An attempt to register timed out. Unregistering client.
    -- 2013-06-20 12:26:11.084 DEBUG [3d73eb88] - [CSIPhoneManager unregisterClientWithError:] Unregistering client.
    -- 2013-06-20 12:26:11.085 DEBUG [3d73eb88] - [CSIPhoneManager setStatus:] Setting status from CSIPhoneStatusRegistering to CSIPhoneStatusDisconnecting
    -- 2013-06-20 12:26:11.085 DEBUG [3d73eb88] - [CSIPhoneManager setSelectedDevice:] New selected device (null) using protocol --
    -- 2013-06-20 12:26:11.085 INFO [3d73eb88] - [TCSessionViewManager softphoneStatusDidChange:] Softphone status changed to CSIPhoneStatusDisconnecting.
    -- 2013-06-20 12:26:11.086 DEBUG [3d73eb88] - ##call count = 0
    -- 2013-06-20 12:26:11.086 DEBUG [3d73eb88] - -[TCTConnectionManager softphoneStatusDidChange:]
    -- 2013-06-20 12:26:11.086 INFO [3d73eb88] - [TCTConnectionManager softphoneStatusDidChange:] CSIPhoneStatusDisconnecting, Softphone status set to DISCONNECTED.
    Also in the CUCM you can see the attempts to register (so discard connectivity issues) that are seen from the CUCM
    The error received is UNABLE TO CONNECT
    any help would be appreciated.
    thanks in advance.

    Hello
    I have same your problem but I didnt change or add anything from CUCM 9 all configuration as default.
    thanks

  • Jabber for iPhone 9.6 Integration with OpenLDAP

         Hi everyone! i just found an issue when try to integrated jabber for iphone version 9.6 with OpenLDAP that seem like not working and want to describe my environment as below.
    Using BE6K 9.1 includes,
         - CUCM 9.1.2
         - IM&Presense 9.1
         - Jabber for Window 9.6 integrate with OpenLDAP using EDI on jabber-config.xml is working properly.
         - Jabber for iPhone 9.6 integrate with OpenLDAP using BDI on jabber-config.xml not working(cannot lookup)
         - Jabber Voice for iPhone and Android can integrate with OpenLDAP which configure in phone configuration  
         - Both of Jabber can't access the photo in OpenLDAP with "jpegPhoto" attribute.
    By the way im also included jabber-config.xml files for further troubleshooting. Another question, is it possible to include EDI and BDI for working together in one jabber-config.xml file
    One another file is jabber for iphone log when im trying to search "anu" word in searching box
    -- 2557-02-02 20:48:06.045 DEBUG [3d8d018c] - sidebar search, string is : a   <------ started from this line in my log file for easier troubleshooting.
    If you need more log or any files for troubleshoot just tell me. Thanks for reading!.
    <Jabber-config.xml>
    <?xml version="1.0" encoding="utf-8"?>
    <config version="1.0">
    <Directory>
    <DirectoryServerType>BDI</DirectoryServerType>
    <BDILDAPServerType>OpenLDAP</BDILDAPServerType>
    <BDIPrimaryServerName>10.0.1.11</BDIPrimaryServerName>
    <BDIServerPort1>389</BDIServerPort1>
    <BDIConnectionUsername>cn=xxx,dc=xxxx,dc=xx,dc=xx</BDIConnectionUsername>
    <BDIConnectionPassword>xxxxxxxBDIConnectionPassword>
    <BDIUseJabberCredentials>false</BDIUseJabberCredentials>
    <BDIEnableTLS>false</BDIEnableTLS>
    <BDIPredictiveSearchFilter>uid</BDIPredictiveSearchFilter>
    <BDIUserAccountName>uid</BDIUserAccountName>
    <BDIBaseFilter>(&amp;(objectClass=inetOrgPerson)</BDIBaseFilter>
    <BDISearchBase1>ou=users, dc=xxxx,dc=xx,dc=xx</BDISearchBase1>
    <BDIUseANR>false</BDIUseANR>
    <ConnectionType>1</ConnectionType>
    <PrimaryServerName>10.0.1.11</PrimaryServerName>
    <UseWindowsCredentials>0</UseWindowsCredentials>
    <UseSecureConnection>0</UseSecureConnection>
    <SearchBase1>ou=users, dc=xxx,dc=xx,dc=xx</SearchBase1>
    <UserAccountName>uid</UserAccountName>
    <BaseFilter>(&amp;(objectClass=inetOrgPerson)</BaseFilter>
    <PredictiveSearchFilter>uid</PredictiveSearchFilter>
    <ConnectionUsername>cn=xxxx,dc=xxx,dc=xx,dc=xx</ConnectionUsername>
    <ConnectionPassword>xxxxxx</ConnectionPassword>
    <PhotoSource>jpegPhoto</PhotoSource>
    </Directory>
    </config>

    Hi noom_ekkalak ,
    Thanks for your answer!
    I have specific LDAP parameter in TCT phone configuration as you say, then try to connect the "Directory" setting in Jabber Voice, but it didn't work . i just get the error “Unable to verify account” all the time.   :(
    Besides this ,is there anything i need to specific? How did you specific Jabber Voice "Directory" parameter?
    Thank you!

  • Does the Wish List for iPhone/iPad/iPod show price drops?

    Does the Wish List for iPhone/iPad/iPod show price drops? I assume it would show the new price in the Wish List but does it inform you if the price drops?

    The apps which show on the file sharing section on your iPad when connected to your computer's iTunes, you have exactly the same apps installed on your iPhone - they are not separate iPad and iPhone apps that you have installed on your iPad/iPhone, and only the iPad version supports file sharing ?
    For iBooks, that won't show, it doesn't support file sharing. You can add ibooks / epubs / PDFs to your computer's iTunes library (the iBooks app if you are using a Mac with OS X Mavericks on it) via File > Add To Library, and you sync them to a device via its Books tab :
    If you want to copy them off the device to your computer's iTunes (to the iBooks app on Mavericks) then File > Devices > Transfer Purchases will copy them over (that will copy PDFs and epubs from the iBooks app on your device, not just ibooks).

  • Going to hotel with wired broadband internet service. how do i convert to wifi for iphone ,ipad

    Going to hotel with wired broadband internet service in room. What is easiest way to coinvert broadband to wifi for my iphone , Ipad and ipoi ?

    Connect the ethernet cable to an Airport Express to provide Wi-Fi for your iDevices.
    http://www.apple.com/airport-express/

  • Hello  i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i b

    hello
    i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i buy iphone5s now can i creat app for iPhone 6 if it has bigger display without buying it just test it on iPhone 5s
    thanks

    One of my favorite things about developing for iOS using Xcode is the Simulator. It runs any of the iOS devices simulated right on your Mac. If you don't have a hardware device to test your application on, the Xcode simulator will surely be your best friend.
    So to answer your question less vaguely, yes. You can own the iPhone 5s and develop for the 6. There is no real release information of the iPhone 6 at the time anyways, so I would not let it play too large of a factor in your decision.

  • Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

    Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy.  It is a Macbook Pro  osx 10.6.8 (late 2010).

    Almost certainly none of the above!  Try each of the following in this order:
    Select 'Reset Safari' from the Safari menu.
    Close down Safari;  move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
    Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
    Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
              defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

  • Jabber for iphone on CUCM 8.6.2

    We have jabber for Iphone configured on CUCM 8.6.2, Everything is working fine except voicemail (CUC 9.1.2)
    It shows status " Not signed", but when you try to enter credentials manually, it doesn't allow to enter Voicemail server. It is greyed out.
    Searched community and couldn't find much info regarding this issue.
    Any help is much appreciated.
    Thanks!

    Manish. Thanks a lot for your reply.
    Yes, we have configured voicemail server settings
    Voicemail Username
    Voicemail Server
    Voicemail Message Store Username
    Voicemail Message Store                    10.1.1.10

  • Jabber for iphone with cucm 10.5

    Hi
    i would like to configure cisco jabber for iphone for the purpose of using my smartphone for calls and instant Messaging
    my question is : i will need COP file uploaded into CUCM 10.5 or already integrated  and also the configuration required 
    regards

    These guides will give you additional info on config part:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0110.html#JABI_TK_C15AA350_00
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0101.html

Maybe you are looking for

  • How to loop at these 2 itabs?

    Hi Champs, In the mycontext tab, i am looping at two internal tables based on where condition. I need to filter data from my 2nd int table and put it out on the form. But somehow i am not bale to check the condition and as a a result i could see all

  • How will i get Netorder value against contract

    Hi, I have loaded 2lis_02_hdr, itm, scl datasources in to customized cube which contains Purchasing document(EBELN), Item(EBELP), Doctype(BSART), Contract(KONNR), Item(KTPNR), Netordervalue(NETWR) Here my requirment is I want to cummulate Netorderval

  • Sync Entourage Notes with Notes on iPhone?

    I've successfully got all my address and calendar data synced from Entourage to my iPhone using Sync Services. What I haven't yet been able to do it get my notes over. Anyone have any ideas? I have a lot of info in these notes that I need to have wit

  • Mobile Direct Store Delivery

    hi, Edited by: maxim on Nov 21, 2008 7:58 AM

  • AdminTask_MakeDim.dts. not working

    Following is from Data Manager Guide "1. Open Data Manager and select eData > Organize Package List. The Organize package list dialog is displayed. 2. From the toolbar, click the Add Package icon. The Add Package dialog is displayed. 3. Select File i