Jabber for Windows 10.6.1 Problem: Chat History sporadically empty

Hi,
we have Jabber for Windows 10.6.1 running on Win 7 64bit Machines. We have the Problem that sporadically the Chat History windows is empty. If this happens, I cannot see my incoming chats (but I can hear Audio that a IM just arrived) and I also cannot see IM Messages I sent out. Also no Screencaptures can be seen in the Chat-History. I also cannot rightclick into the Chat History window to print or save the Chat. Whenever I restart Jabber (not just logging off), it is working again for a couple of time!
Please Cisco help me out. I cannot find a open Bug in the current Release Notes.
Regards
Rene

Hello Scott,
thanks for your answer! We don't have IE11 installed, so we don't have this MS Patch on our systems :-(
I am going to look deeper into this,... maybe another MS Patch. Also have to contact TAC.
Thanks.

Similar Messages

Jabber for Windows- VM issue

I had configured Jabber for windows in windows 7, the problem is after logging into jabber client iam not able to get the "phone accounts" under options.
Iam able to call , and recieve calls but no voice mail. In the Jabber cleint diagnostic it shows username and password is wrong for voice mail.
If i have 'phone acounts' option in jabber client i could set username and password for voice mail. Iam able to telnet the unity server.
Any clue?
We have IM&Presence 9.0, CUCM 9.0
Jabber - 9.2
Tnx
Bobby

HI,
As Aron states - you can configure your client to use same login and password ID as other UC services. This will then mask the fields you see in your jabber client. This is great when you don't want your users to have to populate the fields. The less they have to do the better.
Check your Unity Connection system - is it AXL ot AD or neither ?
If you can, your better to use only one username / password across your UC environment. For now just check your setting for the VM service is not set .

Jabber for Windows Voicemail Playback Issue

Hi,
I have Jabber for Windows installed and voicemail is working ok but when I playback a voicemail from the Jabber client the MWI light does not go out on the phone. If you do the opposite ie listen to a new voicemail through the phone the new message indicator goes out on jabber.
Also if you listen to the voicemail through Jabber client the voicemail plays through the PC speakers. Is there anyway in getting Jabber to direct the call to the phone so the user can pick the handset to listen like you can when listening to voicemail through the Unity Connection Web Inbox.
Thanks for you time
Regards
Neil

Hi Neil,
Playing the voicemails in Jabber should turn off the MWI light. You need to open a TAC case and sent on a problem report to debug this further.
For the second question, the only way I think you can do this is by setting Jabber to deskphone mode and then using the "Call Voicemail" button.
- Colin

Jabber for Windows openLDAP and Deskphone Control

Hello all
I have a new install of 9.1 CUCM, with CUCM IM and Presence. I'm trying to get Jabber 4 windows functioning with an openLDAP directory, and also get Deskphone control working. I suspect i missed something with the configuration as this 9.1 interface is a little different than i'm used to.
First of all, does the concept of a Jabber-Config.xml still apply to a 9.1 install or does the "Service Profile Configuration" in the CUCM interface write the Jabber-config.xml file for you? If my customer uses openLDAP for their LDAP how should I configure the "Service Profile" or do I still use a jabber-config.xml file?
I have successfully tied openLDAP into CUCM with Authetication and brought the users into CUCM. I tested Authentication by logging into the End user page for both CUCM and the CUP server so I know authenticaiton is working. I can login to Jabber but when i click on Help "connection Status" it shows me only connected to "PRESENCE" and "OUTLOOK ADDRESS BOOK" my "Directory", and DESKPHONE" will not connect.
Can I actually get a copy of "my jabber-config.xml" file from the CUCM server to see what it looks like?
Thanks all

Ok I have half of the problem resolved. I got Deskphone controll working with CTI.
Still working on the LDAP issue with openLDAP
My config file looks like so
<?xml version="1.0" encoding="utf-8"?>
   EDI
   1
   ldap.acme.ca
   389
   backup.acme.ca
   389
   0
   uid=voipldap,ou=Users,dc=acme,dc=ca
   password
   givenname
   (&(objectClass=inetOrgPerson)
   telephonenumber
   uid
   ou=users,dc=acme,dc=ca
I got this from page 117 of this guide
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_CA48EE46_00_cisco-jabber-for-windows-administration.pdf
The error I'm getting "invalid credential" but i know they are good because i'm using the same account and path for the CUCM LDAP sync.
Any help would be appreciated.

Jabber for Windows 9.2 Deskphone Control

Hi,
I have a deployment with:
CUCM 9.1(1a) (9.1.1.20000-5)
IM and Presence 9.1(1a) 9.1.1.20000-5
Jabber for Windows 9.2.3(4417)
I have got most features working but Deskphone Control is not working. I can see the devices associated with my user from within Jabber when I select "Use my phone for calls" but cannot control them.
The connection status page shows the correct IP address for the CTI server.
I have spent hours reading through various documents and forums which seem to contain contradictory advice.
To clarify theserver versions that I have deployed support the new UC Services which are referenced from a Service Profile which is assigned to the user.
I am not making any progress resolving this issue. Does anyone have any advice on how to move forward with this?
Thanks
James

Hi Daniel,
we have a Problem with AD-User and DeskPhone ...
The "Active Local User" can control a DeskPhone
The "Active LDAP Synchronized User" can't control a DeskPhone from same PC, but he can controll a Softphone.
Cisco UCM - 9.1.2.10000-28 with LDAP Sync/Auth via 3269 (success)
Cisco UCMIMP - 9.1.1.31900-1
Cisco Jabber - 9.6.0 Build 17088
564 INFO [0x0000226c] [src\common\thread\WorkerThread.cpp(94)] [csf.ecc] [run] - Started thread: CtiConnection
564 DEBUG [0x0000226c] [utilities\socket\TcpSocketHelper.cpp(82)] [csf.ecc] [connect] - About to connect to 172.20.1.11
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(957)] [csf.ecc] [SendRequest] - CDPProvider::SendRequest, msg.sequenceNumber=1, pObject=0477A214, pdunames[msg.msgID]=PROVIDER_OPEN_REQUEST
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(967)] [csf.ecc] [SendRequest] - SendRequest setting msg.sequenceNumber to , msg.sequenceNumber=2
564 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(330)] [csf.ecc] [encode] - Message::encode: , msg.protoVersion=0x000e0000, msg.msgID=3, sizeof(Header)=32, fixedSize=108, varSize=90
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(973)] [csf.ecc] [SendRequest] - SendRequest Succeed., pdunames[msg.msgID]=PROVIDER_OPEN_REQUEST, msg.sequenceNumber=2
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(986)] [csf.ecc] [SendEvent] - CDPProvider::SendEvent, pObject=0477A210, nType=1001
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(919)] [csf.ecc] [OnEvent] - CDPProvider::OnEvent, pObject=0477A210, nType=1001, pvThis=0477A210
564 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(317)] [csf.ecc] [ecc::DeskPhoneConnectionContext::OnProviderEventUpdated] - OnProviderEventUpdated(1001), state=STATE_INITIAL_LOGIN, loginstate=LOGINSTATE_OPENING
564 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1148)] [csf.ecc] [DispatchTheMessage] - CDPProvider::DispatchTheMessage, nPduNum=4, pduName=PROVIDER_OPEN_RESPONSE
564 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1232)] [csf.ecc] [DispatchTheMessage] - Received , pdunames[nPduNum]=PROVIDER_OPEN_RESPONSE, seqNum=2
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(267)] [csf.ecc] [HandleMessage] - CDPProvider::HandleMessage, nPduNum=4
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(407)] [csf.ecc] [HandleResponse_ProviderOpen] - CDPProvider::HandleResponse_ProviderOpen
564 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(360)] [csf.ecc] [decode] - Message::decode: , totalSize=107, type=0, magic=4294958557, msg.protoVersion=0x000e0000, pduNum=4, hdrSize=32, fixedSize=52, varSize=31
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(415)] [csf.ecc] [HandleResponse_ProviderOpen] - CUCM protocol version: , resp.getProtoVersion()=0x000e0000
564 WARN [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1026)] [csf.ecc] [ResetHeartbeatTimer] - m_heartbeatIntervalS not set, timeout not set.
845 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1148)] [csf.ecc] [DispatchTheMessage] - CDPProvider::DispatchTheMessage, nPduNum=126, pduName=PROVIDER_OPEN_COMPLETED_EVENT
845 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1290)] [csf.ecc] [DispatchTheMessage] - PDUTYPE_ProviderEvent or PDUTYPE_Heartbeat, nPduNum=126, pdunames[nPduNum]=PROVIDER_OPEN_COMPLETED_EVENT
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(267)] [csf.ecc] [HandleMessage] - CDPProvider::HandleMessage, nPduNum=126
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(488)] [csf.ecc] [HandleEvent_ProviderOpenCompleted] - CDPProvider::HandleEvent_ProviderOpenCompleted
845 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(360)] [csf.ecc] [decode] - Message::decode: , totalSize=161, type=0, magic=4294958557, msg.protoVersion=0x000e0000, pduNum=126, hdrSize=32, fixedSize=72, varSize=65
845 WARN [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(502)] [csf.ecc] [HandleEvent_ProviderOpenCompleted] - ProviderOpen failed: reason: 0x8ccc0060, Directory login failed - authentication failed.
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(986)] [csf.ecc] [SendEvent] - CDPProvider::SendEvent, pObject=0477A210, nType=1008
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(919)] [csf.ecc] [OnEvent] - CDPProvider::OnEvent, pObject=0477A210, nType=1008, pvThis=0477A210
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(317)] [csf.ecc] [ecc::DeskPhoneConnectionContext::OnProviderEventUpdated] - OnProviderEventUpdated(1008), state=STATE_INITIAL_LOGIN, loginstate=LOGINSTATE_LOGGING_IN
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(891)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - create DPLogoutWorkItem
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(892)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - Setting _loginState = LOGINSTATE_DISCONNECTING
845 DEBUG [0x0000226c] [c\deskphonewrapper\CC_DPService.cpp(926)] [csf.ecc] [ecc::CC_DPService::raiseLoginFailure] - raiseLoginFailure(5)
845 DEBUG [0x000013a0] [pper\DeskPhoneConnectionContext.cpp(898)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::run] - DPLogoutWorkItem::run()
845 INFO [0x0000226c] [\deskphonewrapper\CC_DPService.cpp(1078)] [csf.ecc] [ecc::CC_DPService::notifyConnectionStatusObservers] - dispatching ConnectionStatus Change eIdle
845 DEBUG [0x00002788] [c\deskphonewrapper\CC_DPService.cpp(298)] [csf.ecc] [ecc::CC_DPService::start] - Finished waiting for deskphone to go in to service...
845 INFO [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(218)] [csf.ecc] [Close] - CDPProvider::Close
845 INFO [0x0000226c] [control\CallControlManagerImpl.cpp(3092)] [csf.ecc.evt] [ecc::CallControlManagerImpl::notifyConnectionStatusChange] - CONNECTION_STATUS_CHANGE: eIdle
845 ERROR [0x00002788] [control\CallControlManagerImpl.cpp(1989)] [csf.ecc] [ecc::CallControlManagerImpl::doConnect] - doConnect() returnCode : AuthentincationFailure
845 DEBUG [0x000017a0] [s\telephonyservice\ECCObservers.cpp(153)] [csf-unified.telephony.ECCObserverLogger] [ECCObservers::onConnectionStatusChange] - onConnectionStatusChange(status = eIdle).
845 DEBUG [0x0000226c] [\deskphonewrapper\CC_DPService.cpp(1014)] [csf.ecc] [ecc::CC_DPService::raiseProviderStateChange] - Got cxn change, disconnecting deskphone video Idle
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(957)] [csf.ecc] [SendRequest] - CDPProvider::SendRequest, msg.sequenceNumber=2, pObject=0477A214, pdunames[msg.msgID]=PROVIDER_CLOSE_REQUEST
845 ERROR [0x00002788] [control\CallControlManagerImpl.cpp(2025)] [csf.ecc] [ecc::CallControlManagerImpl::doConnect] - doConnect() returnCode : eDeviceRegAuthenticationFailure
845 DEBUG [0x000017a0] [elephonyservice\BackgroundWorker.cpp(35)] [csf-unified.telephony.BackgroundWorkerLogger] [BackgroundWorker::doTask] - Adding new task to BackgroundWorker. Task name is: TelephonyAdapter::onConnectionStatusChange
845 INFO [0x0000226c] [rc\deskphonevideo\DeskPhoneVideo.cpp(76)] [csf.ecc] [ecc::DeskPhoneVideo::disconnect] - disconnecting
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(967)] [csf.ecc] [SendRequest] - SendRequest setting msg.sequenceNumber to , msg.sequenceNumber=3
845 INFO [0x00002788] [control\CallControlManagerImpl.cpp(2411)] [csf.ecc] [ecc::CallControlManagerImpl::doDisconnect] - --->
845 DEBUG [0x000017a0] [common\processing\TaskDispatcher.cpp(29)] [TaskDispatcher] [Processing::TaskDispatcher::enqueue] - Enqueue TelephonyAdapter::onConnectionStatusChange - Queue Size: 9
845 DEBUG [0x0000226c] [c\deskphonevideo\DeskPhoneVideo.cpp(315)] [csf.ecc] [ecc::DeskPhoneVideo::stopCdp] - Stopping CDP
845 DEBUG [0x000013a0] [oneprovider\QBE\ProtocolElement.cpp(330)] [csf.ecc] [encode] - Message::encode: , msg.protoVersion=0x000e0000, msg.msgID=9, sizeof(Header)=32, fixedSize=4, varSize=0
845 INFO [0x00002788] [pper\DeskPhoneConnectionContext.cpp(267)] [csf.ecc] [ecc::DeskPhoneConnectionContext::stop] - DeskPhoneConnectionContext::stop
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(973)] [csf.ecc] [SendRequest] - SendRequest Succeed., pdunames[msg.msgID]=PROVIDER_CLOSE_REQUEST, msg.sequenceNumber=3
845 DEBUG [0x0000226c] [c\deskphonevideo\DeskPhoneVideo.cpp(318)] [csf.ecc] [ecc::DeskPhoneVideo::stopCdp] - CDP stopped
845 INFO [0x000017a0] [src\AccessoriesManager.cpp(234)] [csf.accessory.event] [accessory::AccessoriesManager::onConnectionStatusChange] - Received onConnectionStatusChange - eIdle
845 DEBUG [0x00002788] [pper\DeskPhoneConnectionContext.cpp(891)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - create DPLogoutWorkItem
845 INFO [0x000013a0] [\deskphoneprovider\CtiConnection.cpp(49)] [csf.ecc] [stop] - CtiConnection::stop
Thanks,
Guennadi

Jabber for Windows 9.2 deskphone control issue

Hi experts,
I'm having a problem with the newly installed Jabber for Windows 9.2.0. When I click on the bottom right "control phone" and select my Cisco 7941 it fails. I tried restarting the Cisco CTIManager service with no luck.
Deployment:
IM&Presence: cloud (Webex service)
CUCM version: 8.6(2a)
LDAP integration: full (with authentication)
Deskphone control was working prior the upgrade of Jabber for Windows. Everything else remained the same version.
Using Jabber softphone as a client still works fine.
CUCM ENd User is correctly configured.
Wireshark trace of my Jabber for Windows 9.2 client communicating with CUCM when attempting to control my deskphone shows the following:
Username: filippo.zangheri
Password: checked three times (it is correct because Jabber softphone works fine).
Any hint?
Thanks.
Filippo

Davide,
I know i am kind of late to the party on this one but i have fixed my issue and wanted to give you the information to see if this will work for you. If this is even still an issue?
I too had the same issue and just like you i confirmed everything was correct however I discovered something when I was looking into my End User profile on the CUCM. I had originally swapped my 7971 phone with a new 8945 phone and I had both phones associated with my line for a while before I removed the old 7971.
My End User profile still had both phones associated with my number even though the 7971 phone had been removed from my line. This was not allowing the CTI to connect to my 8945 phone or allow my jabber client to "Control Phone" properly because it couldn't figure out which phone to control. I went into the CUCM and physically deleted the 7971 phone from the system which released the associated phone in my End User profile. Once I did that, I "Control Phone" in my Jabber client and voila it worked like a charm!
To make sure I didn't have any Jabber client issues after doing this i signed out of my Jabber client and deleted the local system profile for the Jabber client and then signed back into Jabber and let it recreate the profile. Once that was done i have not had any issues with my Jabber client controlling my phone and all functions work perfectly.
Hope this helps...

Jabber for Windows LDAP Profiles

I have been unable to find a lot of information on LDAP profiles, but I came across a blog that said that LDAP profiles are only used for Android, iphone and ipad. It stated that the only way to control the search base on Jabber for Windows is by using the jabber-config.xml file. So far this appears to be true based on my limited testing.
I have been able to integrate with OpenLDAP using the jabber-config.xml file to set the server and search base. The only problem i can see with this particular design is I would have to give all users the same LDAP profile and search settings. In our environment this will not satisify our requirements.
Does anyone know of a way where i can integrate with OpenLDAP, use the Jabber for windows client and control the LDAP search setttings on a per user basis?
Thanks

Yes but you won't like it.
Group Configuration File NamesYou specify the name of the group configuration files in the Cisco Support Field on the CSF device configuration in Cisco Unified Communications Manager.If you remove the name of the group configuration file in the CSF device configuration on Cisco Unified Communications Manager, Cisco Jabber for Windows detects the change, prompts the users to sign out, and loads the global configuration file. You can remove the name of the group configuration file in the CSF device configuration by deleting the entire configurationFile=group_configuration_file_name.xml string or by deleting the group configuration filename from the string.If users have desk phone devices only, use the following command line argument to specify unique names configuration files for different groups: TFTP_FILE_NAMESee the Install Cisco Jabber for Windows chapter for more information about the command line arguments.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber for Windows cannot control 8841 desk phone

Hello Team,
We have a problem with desktop phone control in case of 8841 phone.
When the user try to switch to the 8841 phone in Jabber then we got the following error message in the log:
2014-11-07 09:39:53,855 ERROR [0x00000298] [ice\TelephonyAdapterPhoneDevice.cpp(178)] [TelephonyAdapter] [TelephonyAdapter::selectDeviceImpl] - switchMode to device [SEP84802D7698D6] failed with error [eDeviceRegCouldNotOpenDevice]
We get the red X on the phone icon, and the desktop phone control is not working.
If the same user try to control 7940 phone, then it's working fine.
The environment: UCM 9.1.2.12901-3, CUPS 9.1.1.51900-5, Jabber for Windows 10-5.2
Edited:
Same issue with UCM 10.5.1, CUPS 10.5.1, and Jabber for Windows 10.5.2.
Regards,
Zsolt

Hi Zolt,
The RT phones need below end user permissions also in order to control deakphones:
Standard CTI Allow Control of Phones supporting Connected Xfer and conf
Standard CTI Allow Control of Phones supporting Rollover Mode
If they are not added, please add these permission.
Regards

Call/video not working between Cisco jabber for Windows and VCS control C40s

Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!

Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
       capability receiveAudioCapability :
g729wAnnexB : 6
       capabilityTableEntryNumber 3,
   capability receiveAudioCapability : g729AnnexAwAnnexB : 6
       capabilityTableEntryNumber 4,
       capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
       capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
   cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
   Message Type: Release
Complete
   Call reference flag: Message sent from originating side
Call reference value: 0x7b
   Info Element : Cause
     Location: Usr
   Cause Value: Resource unavailable
   Info Element : User User
   Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again.

Jabber for Windows 9.1 external contact adding

I have a Jabber for Windows 9.1 deployment, and I can't add external contacts. The external contacts in this case are on a federated OCS deployment with the same LDAP. If I add them in the user options page and restart they work fine. My LDAP searches only return the local jabber domain directory.
Anyway, a quick look around shows me that adding external contacts in Jabber 9.0 was not supported, but it was supposed to be added in 9.1. Is this not the case?

Yeah the problem is that that will add the local jabber IM address rather than the LDAP one since the user exists in both directories.
e.g. jabber domain = tst.local
OCS = test.com
if you add the [email protected] as a contact then it will replace it with [email protected]
If you add [email protected] in the user options page and restart jabber it works
edit: anyone know how to unmark a reply as the correct answer, accidentally clicked on that instead of reply

Jabber for Windows 9.1(3) - All network connections fail at least once a day

Hi,
We have Jabber for Windows 9.1(3) running, with the MSI 3.2 installed as well.
At least once a day my computer stops making network connections (Outlook gets disconnected, Internet Explorer cannot connect to Google, Chrome also fails). When I shut down and restart Jabber all network IO resumes.
Has anyone seen this behavior?
I've made two problem reports for this. Is anyone interested?
Regards,
Erik Tamminga
PS. Server side we're running all 9.1 versions.

We had the same issue and logged a TAC case, and the final result was to uninstall media services as mentioned above. Obviously now you no longer have desk phone video.
The new 9.2 beta has a new media service version, and the rollout of the new 9.2 client is mid march I believe, so hopefully this rectifies the problems, because if it doesn't I think this would not be a good thing for Jabber as a product unfortunately.
Cheers

Jabber for Windows contact card mapping to Work field

Hi All
In Jabber for Windows 9.7, the fields that sync from AD display in the contact card as Work: multiple times, I am trying to undewrstand how it determines to call the field Work as we get multiple entries as follows
Chat (IM Address):  username@domain (this is because user id + domain is different to the email)
Email:                      email address
Work:                       email address (which I believe is Directory URI)
Work:                       telephoneNumber
Work:                       IpPhone
This isnt very user friendly is there any way this can be changed, I know the Jabber-config.xml file does not have this work field as a mapping.
Kind Regards
Nick

I believe that mapping is businessphone

Jabber for Windows 10.5 shows contacts from Address Book multiple times?

What would cause Jabber for Windows 10.5.1 to show a contact multiple times from the address book when searching? See attached screenshot.

I tried removing firefox and rebooting/reinstalling Jabber with no luck. I reimaged my machine and loaded 10.5.2 fresh install with no previous versions and still getting the random crash. Also, I have users who say it has crashed on them during a WebEx and have had installation problems when upgrading from 9.x to 10.5.x. Version 9 is very solid, sticking with 9.7.5. I have about 10% of my test users having varying problems with version 10.5.x, waiting till the next release. Hopefully Cisco will spend a few more weeks testing the next one before publishing it on their site.
--edit--
Also, when you finally get frustrated and want to downgrade, Jabber 10.5.x doesn't uninstall completely and you end up with an error like the image attached when you try to install v9.7.5 for example and can't install Jabber even after rebooting. I had to run Microsoft Fix It install/Uninstall option and tell it to uninstall Jabber before Windows allowed me to install an older version of Jabber. Not too happy with this release. Strange enough though, some of my users have the exact same laptop I do, same windows build, same patches, etc, and it works fine for them. Anyway, not deploying this one. Good luck.

Jabber for Windows Can't Login

Hi,
I have Jabber for Windows 9.6.1 and IM and Presence Server 9.1.1. The problem is it says it cannot communicate with the server upon logging in. But if I typed a wrong username / password it says "Your username and password is not correct." Has anyone experienced this? I cannot open a TAC case because this is a demo only. Hope someone can help.
Thank you.

I have a similar problem. I have two production clusters that I support.
The first in running CUCM 8.6(2), without IM & Presence, and the second is running CUCM 9.1(2) with Presence 9.1(1).
The two clusters are georgrapphically dispersed, but are in the same domain. I've built a lab environment simulalating the first cluster, which is soon to be upgraded. As part of the upgrade, IM & Presence server will be added. EVentally, the two clusters will be able to Jabber each other. At present, we use WebEx Connect.
The lab environment has a CM, Unity, and a IM &P server. The License manager has been set up and a copy of my production licenses have been converted to CUWL, and are installed in the test environment. The lab envrionment is installed w/o DNS, and all servers are a) referenced by IP address, and b) on the same subnet.
My CM links to LDAP are complete, and I can see all of my AD users in CM, Unity, and IM&P.
Additionally, I have configured a local user in CM. I have both a local user and an AD user configured to a phone in an unused range. These two users are active and enabled.
I've created CSRs for the IM&P server and CM, and have imported my private CA certs as well as certs for tomcat,cups-xmpp, and ipsec. As far as I can tell, the required services are up.
For Jabber, I'm currently playng with 10.5.0 for Windows.When I attempt to login I'm told the username or is incorrect.

Jabber for Windows login to the IM&P but not to the CUCM

Hi,
I have Jabber for Windows, IM and Presence Server 10.5 and CUCM 10.5. The problem is it says it cannot communicate with the server upon logging in. But if I typed a wrong username / password it says "Your username and password is not correct."
When I try to login to the IM&P it seems okay (even though without phone services). When I try to login to the CUCM it shows some problem.
I've create CSFMGUIDO device with password 12345. When I logon to the CUCM with the following credentials: mguido - 12345 it says "Unable to communicate with the server". When I logon to the CUCM with the following credentials: mguido - 00000 it says "Username and password is not correct".
I'm not using neither LDAP nor DNS. With Android Jabber all it's working correctly.
Has anyone experienced this?
Hope someone can help.
Thank you.

J4W does rely very heavily on DNS, you should at least all required entries to hosts and lmhosts.
How are your servers defined under system -> server??
Are you able to log into UCMuser page??
Have you properly configured all user/device/line association, and created the necessary service profiles???

Jabber for Windows 10.6.1 Problem: Chat History sporadically empty

Similar Messages

Maybe you are looking for