Jabber for Windows 9.1 external contact adding

I have a Jabber for Windows 9.1 deployment, and I can't add external contacts. The external contacts in this case are on a federated OCS deployment with the same LDAP. If I add them in the user options page and restart they work fine. My LDAP searches only return the local jabber domain directory.
Anyway, a quick look around shows me that adding external contacts in Jabber 9.0 was not supported, but it was supposed to be added in 9.1. Is this not the case?

Yeah the problem is that that will add the local jabber IM address rather than the LDAP one since the user exists in both directories.
e.g. jabber domain = tst.local
OCS = test.com
if you add the [email protected] as a contact then it will replace it with [email protected]
If you add [email protected] in the user options page and restart jabber it works
edit: anyone know how to unmark a reply as the correct answer, accidentally clicked on that instead of reply

Similar Messages

Jabber for Windows 9.2.1 Contact Away status doesn't show duration

.Jabber for Windows 9.2.1 Contact "Away" status doesn't show duration. I am wondereing if it is possible with Cisco Jabber client. Microsoft OCS client used to show.

Hi,
This is currently not supported in Jabber.
If you think that this feature should be in Jabber, you can open a TAC case and do Enchancment request with them?
Regards,
Srdjan

Jabber for Windows 10.5 shows contacts from Address Book multiple times?

What would cause Jabber for Windows 10.5.1 to show a contact multiple times from the address book when searching? See attached screenshot.

I tried removing firefox and rebooting/reinstalling Jabber with no luck. I reimaged my machine and loaded 10.5.2 fresh install with no previous versions and still getting the random crash. Also, I have users who say it has crashed on them during a WebEx and have had installation problems when upgrading from 9.x to 10.5.x. Version 9 is very solid, sticking with 9.7.5. I have about 10% of my test users having varying problems with version 10.5.x, waiting till the next release. Hopefully Cisco will spend a few more weeks testing the next one before publishing it on their site.
--edit--
Also, when you finally get frustrated and want to downgrade, Jabber 10.5.x doesn't uninstall completely and you end up with an error like the image attached when you try to install v9.7.5 for example and can't install Jabber even after rebooting. I had to run Microsoft Fix It install/Uninstall option and tell it to uninstall Jabber before Windows allowed me to install an older version of Jabber. Not too happy with this release. Strange enough though, some of my users have the exact same laptop I do, same windows build, same patches, etc, and it works fine for them. Anyway, not deploying this one. Good luck.

Cisco Jabber for Windows 10.5 search Contact with two lastnames

Hey Guys,
I have a little problem with the contact search feature of the cisco jabber for windows (Version 10.5.37889)
In my environment I have some Users (secretary phones and users too) which have two lastnames.
Exampleuser1: Firstname: Thomas Lastname: Meier Cisco ....
If a user is searching for Exampleuser1 by lastname (Cisco) the correct contact won't be listed
If a user is searching for Exampleuser1 by firstname (Thomas) the correct contact will be listed
If a user is searching for Exampleuser1 by lastname (Meier) the correct contact will be listed
is there a workaround or something else for resolving my problem?
thanks for reading my question :)

Workaround: "Cisco Meier, Thomas"
Have you looked at enabling wild card searches in jabber-config.xml?

Jabber for Windows 9.1.0 no contact lists are added

Hi,
We are using Jabber for Windows 9.1.0, we are surprised to see that contact list is empty. Do we need to manually add all the users? We have Presence server integrated with LDAP.
How can we add all the users to be appeared on contact list of all the users?
Regards
MAC

Did you configure the contact list in IM&P so that you had them when you logged in????
If not, yes, your contact list will be empty and you need to add the users manually.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Jabber for Windows and Ldap Contacts without CUPC license

Dear Sr:
It is possible to add a user on ldap as a jabber contact WITHOUT assigning a CUPC license to the user?
The idea is that some users on the ldap don't have jabber but we should be able to add them as a contact AND we dont want to use jabber licenses for those users or have Presence server to load balance those users.
We can add Microsoft contact as jabber contact with no issues...
Thanks

LDAP Authentication of End Users in CUCM is strongly recommended for CUPC/Jabber. When you login to CUPC/Jabber it authenticates against CUCM. If LDAP doesn't have the same password (i.e. CUCM isn't synced from LDAP) the client won't be able to do LDAP queries if using BDI. This is because it re-uses the same credentials when it attempts to bind to LDAP. If Jabber is configured for EDI, which is only even possible on Jabber for Windows running on domain-joined workstations, then this is not as critical since it would use the Windows ADSI API in the context of the logged-in user. Using EDI exclusively would rule out Jabber for Mac, iOS, Android, and Windows on a non-domain joined workstation though.
As for usernames: You can continue to use employeeNumber if you wish. You'll need to ensure that the jabber-config.xml file maps the username to this value for everything to work. Note that this will be their XMPP URI: [email protected] so be sure that you're comfortable with employee numbers being public.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber for Windows contact card mapping to Work field

Hi All
In Jabber for Windows 9.7, the fields that sync from AD display in the contact card as Work: multiple times, I am trying to undewrstand how it determines to call the field Work as we get multiple entries as follows
Chat (IM Address):  username@domain (this is because user id + domain is different to the email)
Email:                      email address
Work:                       email address (which I believe is Directory URI)
Work:                       telephoneNumber
Work:                       IpPhone
This isnt very user friendly is there any way this can be changed, I know the Jabber-config.xml file does not have this work field as a mapping.
Kind Regards
Nick

I believe that mapping is businessphone

Jabber for Windows 9.2.5 Local Contacts

Hi Guys,
     By default, Jabber for Windows 9.2.5, when searching for contacts, it first lists the local Outlook contacts, and then it shows the list of Corportate Directory Contacts.
     Is there a way to show only LDAP contacts?? I don't want the list of local contacts to be available.
Best Regards,

In jabber 9.2 you should be able to change this behavior from the client as well.
http://tools.cisco.com/squish/c5cB2
Local Contacts in Microsoft Outlook
Cisco Jabber for Windows lets users search for and add local contacts in Microsoft Outlook.
To search for local contacts in Microsoft Outlook with the client, users must have profiles set in Microsoft Outlook. In addition, users must do the following:
    Select File > Options.
    Select the Integration tab.
    Select either None or Microsoft Outlook.
To add local Microsoft Outlook contacts to contact lists in the client, local contacts must have instant message addresses in Microsoft Outlook.
To show contact photos in the client interface, local contacts in Microsoft Outlook must have instant message addresses.
To communicate with local contacts in Microsoft Outlook using the client, local contacts must have the relevant details. To send instant messages to contacts, local contacts must have an instant message address. To call contacts in Microsoft Outlook, local contacts must have phone numbers.
An additional step if needed. If you add this line to the XML and the Outlook contacts still show, you may want to delete the cache in order to remove locally cached contacts.
This cache can be found under:
%USER_PROFILE%\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\
Hope this helps as well!

Contacts search for cisco Jabber for Windows & MAC

Hello,
Please assist on given below query !!
System Deatails of CUCM & IM Presence Server
CUCM:
1> System version: 9.1.1.20000-5
2> VMware Installation: 2 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 4096Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with IM & Presence
IM & Presence:
1> System version: 9.1.1.20000-5
2> VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU X5650 @ 2.67GHz, disk 1: 80Gbytes, 2048Mbytes RAM
3> Physical Server UCS210 M2
4> Already Integrated with CUCM
Requirement:
1> User Search base for Cisco Jabber for Windows & MAC Client
2> Will we able to get contacts list(Jabber For windows & MAC) as like "Lotus Sametimes" for all users?
Every reply would highly Appreciated!!

Hi Karthik,
Thanks for your reply!
I have gone through the link but query is different actually, please assist on below query and provide any document links if possible.
1> The contacts does not appear when I perform a search
2> Do I required to integrate LDAP for same? If Yes Then Do I need to perform integration with CUCM Or IM & Presence? Or Only CUCM? Or only IM & Presence? (Please post a link to perform same)
3> Please also provide If any specific system requirement for LDAP server.
4> Is it possible without LDAP integration?
It is really urgent and every post would highly appreciate..........

How to create contact groups in Jabber for Windows

Attempting to deploy Jabber for Windows. I can't find where in CUPS to build the contact groups that will deploy to the users. We are wanting to build our groups by our locations and deploy them from there. Any help would be greatly appreciated.

Hey Darren,
With CUPS 8.6(1), you can import users contact lists and as well create groups via the bulk administration page of CUPS.
This is outlined in the deployment guide below:
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_6/english/install_upgrade/deployment/guide/dgcupc.html#wp1292041
Keep in mind, this functionality is only available in CUPS 8.6(1) or higher and not in any older version.
Regards,
Jas

Cisco Jabber for Mac - Directory Lookup and Contact Fields

Hello,
After having issues myself with Cisco Jabber for Mac 9.2 specifically with Active Directory lookups not working, or contact information not populating (and therefore not being able to call users from the contact list as no telephone information exists) I am including a sample jabber-config.xml file that works for me.
Please note: there are many different ways to configure this. What I will be showing is the method that works for me and my deployment, which is pretty standard.
As always and as a disclaimer, once again, this is what has worked for my deployment scenario. Always keep backups of your configuration files, and always be mindful of anything you have configured already, especially in the jabber-config.xml file.
Background
My deployment is based on CUCM 9, with 1 publisher and 2 subscribers. I also have a CUCM IM & Presence 9.0 server. This assumes that you have already configured your deployment and Jabber is functioning already, albeit with the aforementioned issues.
As for Active Directory, my deployment will be based on Windows 2008 R2 Domain Controllers running in native 2008 mode. For this example, we will be searching directly against one of the DCs with a Global Catalogue role. Please be aware that in large deployments you will have to plan accordingly with regards to lookup traffic from Jabber clients to the DCs.
Also, as of Cisco Jabber for Mac 9, the client no longer can search via the CUCM internal directory (which may be made of local end users, Active Directory synced users, or a mix of both) and this must be done via a LDAP mechanism.
Scenario
In this deployment scenario, Cisco Jabber for Windows is working properly - you can search and add people from Active Directory, and contacts in your contact list have all the appropriate fields populated from Active Directory. However, when trying the same with Jabber for Mac, Jabber for iPhone or Jabber for iPad you notice that you cannot perform a directory lookup, and if you add people directly (for example, [email protected]) the user only has the IM field populated. No telephone, email or additional information is displayed.
Solution
Whereas Cisco Jabber for Windows uses the EDI mechanism (native Windows), whereby when running from a computer that is on the domain (or in the event that you are search for contacts in another Active Directory domain where a domain trust exists) , Jabber for Mac / iPhone / iPad uses the BDI mechanism.
In this case, you will need to provision a jabber-config.xml file that you will upload to your TFTP server (or Publisher) that will be "downloaded" by your Jabber for Mac client and also used by the iPhone and iPad client. You can configure many options in the jabber-config.xml file, but for this example we will place just the information that we need to order for these clients to request and display Active Directory information.
Please note that the configuration may vary depending on your deployment, but at the very least we will be:
- Configuring a DC where we will perform the lookup.
- Configure credentials that will be used to perform the lookup. This will be an Active Directory account that has read rights on the Active Directory domain. Please note that these credentials are saved in plain text in the file, so ensure that the account that you will be using is not privileged.
- Configure the server port that we will be using to perform the lookup.
- Configure the Search Base. This is basically where we want the directory lookup to happen. You can either choose for this lookup to start at the "base" of the domain (and therefore the search will iterate through all the user accounts and and OUs below the root base) or define a specific OU where you want to search.
Caution!
- There is a current limitation with Cisco Jabber for Mac whereby you can only have 1 search base configured. Please keep this in mind if, like me, you have multiple OUs (like an OU for each company in your organization) and under these OUs you have sub OUs as a user account container.
- If using the top level search base, unless you specify a filter, you will potentially be able to search for all user accounts in the domain. You will need to configure the <BDIBaseFilter> parameter if you want to fine tune your search ability.
Steps
These are the steps I have followed. Other steps or considerations may vary.
- Log in to your TFTP server and download the jabber-config.xml file and keep it as a backup. If you are already using the jabber-config.xml file for other purposes, do not worry - you can add your BDI information parameters inside.
- Remove the jabber-config.xml file
- Edit the jabber-config.xml file and configure thus:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
    <Directory>
        <DirectoryServerType>BDI</DirectoryServerType>
        <BDILDAPServerType>AD</BDILDAPServerType>
        <BDIPrimaryServerName>DOMAIN CONTROLLER IP ADDRESS</BDIPrimaryServerName>
        <BDIPresenceDomain>YOUR PRESENCE DOMAIN</BDIPresenceDomain>
        <BDIServerPort1>3268</BDIServerPort1>
        <BDISearchBase1>YOUR SEARCH BASE</BDISearchBase1>
       <BDIConnectionUsername>[email protected]</BDIConnectionUsername>
        <BDIConnectionPassword>PASSWORD</BDIConnectionPassword>
        <BDIEnableTLS>0</BDIEnableTLS>
   </Directory>
</config>
For example, let´s assume the following:
- Domain controller IP address is 10.1.1.2 .
- Your presence domain is test.local .
- Your search base will be test.local using the top level of the domain.
- Your username with which you will be doing your searches is called walt . Usually you can either identify walt as test.local\walt or [email protected] . It is always best, in these sort of scenarios, to use the UPN convention so we will be configuring a [email protected] .
- The password is the Active Directory password for the account walt .
- I have disabled TLS in my case. There are issues with the Jabber for Mac client when using other security methods.
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
    <Directory>
        <DirectoryServerType>BDI</DirectoryServerType>
        <BDILDAPServerType>AD</BDILDAPServerType>
        <BDIPrimaryServerName>10.1.1.2</BDIPrimaryServerName>
        <BDIPresenceDomain>test.local</BDIPresenceDomain>
        <BDIServerPort1>3268</BDIServerPort1>
        <BDISearchBase1>DC=test,DC=local</BDISearchBase1>
       <BDIConnectionUsername>[email protected]</BDIConnectionUsername>
        <BDIConnectionPassword>walt01!</BDIConnectionPassword>
        <BDIEnableTLS>0</BDIEnableTLS>
   </Directory>
</config>
One you have configured the jabber-config.xml file, you will now need to upload it to you TFTP server. Once uploaded, you will need to restart the Cisco TFTP service. Again, my TFTP server is on my CUCM publisher, so:
- I go to Cisco Unified OS Administration on my Publisher server, TFTP File Management and I upload jabber-config.xml to / directory
- I then go to Cisco Unified Serviceability on my Publisher server, I locate the Cisco TFTP service and I restart the service
Once this is done, you can figure up your Jabber for Mac client. As a test, on your Mac (using Terminal) go to:
/Users/username/Library/Application Support/Cisco/Unified Communications/Jabber/Config
In here you will see several files, but what we want to see is jabber-config.xml . As soon as you start the Jabber for Mac client and log in, the jabber-config.xml file will download from your TFTP server and get saved here. When you see it appear, just type in your terminal window more jabber-config.xml and make sure that the output is the same as the xml file you created.
From there, try doing directory search. If you have previously added contacts and they still lack attribute information, you will need to remove them (sometimes it will not refresh properly) and add them again from the directory.
I will be updating this guide and ammending anything that is incorrect, but this is meant to be a quick checklist and steps to get this, at least in the most very basic version, up and running for Jabber for Mac.

Hello,
Thanks for this post! It works, I can do lookup and also I can add found contact to contact list and get information about contact from LDAP.
One more question: - I can't get all information about contact. I don't get e.c mobile phone number and more others attributes. I have tried to expand your file as follows:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>IP of AD</BDIPrimaryServerName>
<BDIPresenceDomain>Presence Domain</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1> Search Base</BDISearchBase1>
<BDIConnectionUsername>User</BDIConnectionUsername>
<BDIConnectionPassword>Password</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
       <BDISipUri>msRTCSIP-PrimaryUserAddress</BDISipUri>
       <BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
       <BDIBusinessPhone>telephoneNumber</BDIBusinessPhone>
       <BDIMobilePhone>mobile</BDIMobilePhone>
       <BDIHomePhone>homePhone</BDIHomePhone>
       <BDIOtherPhone>otherTelephone</BDIOtherPhone>
       <BDITitle>title</BDITitle>
       <BDICompanyName>company</BDICompanyName>
<BDILocation>co</BDILocation>
<BDIPostalCode>postalCode</BDIPostalCode>
       <BDICity>l</BDICity>
       <BDIState>st</BDIState>
       <BDIStreetAddress>streetAddress</BDIStreetAddress>
</Directory>
</config>
But it didn't help.
When I capture lookup via Wireshark, I can see that Jabbers sends search request with bunch of attributes, but from LDAP answer contains only 8 attributes. (see attached screenshots)

Jabber for windows 9.2.6 client

hi
i have just upgraded some of my cisco jabber for windows clients to the latest release 9.2.6 (upgraded from 9.2.3)
i noticed that the first time the client startsup i get certificate warnings for our CUCM-PUB, SUB, CUC device and CUPS server. (all version 8.6)
all use the standard cisco SSL certificate (have not deployed 3rd party SSL certificates)
is there a way to get all these certificates trusted by the client machines, it has never prompted me before and works fine with 9.2.3
on the mac clients i have added them to the keychain when i first deployed the clients (manual job) but i like to see if i can automate this for my 30 windows clients (the users will not click on this themselves and will use it as an excuse not to load jabber (they don't like the call window pop ups but that is something for jabber 9.6 client
any idea how to get these certificates trusted by the windows computers (we have an 2008 r2 active directory so could do something with an group policy and or use our own internal windows certificate authority)
many thankss

when i run show web-security i get this
admin: show web-security
Version: V3
Serial Number: 441991719279266168307794
SignatureAlgorithm: SHA1withRSA (1.2.840.113549.1.1.5)
Issuer Name: CN=mydomain-CA, DC=mydomain, DC=com
Validity From: Mon Oct 28 15:32:30 GMT 2013
           To:   Wed Oct 28 15:32:30 GMT 2015
Subject Name: CN=uk-cucm-pub.mydomain.com, OU=IT, O=mydomain, L=London, ST=London, C=GB
Key: RSA (1.2.840.113549.1.1.1)
    Key value: 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
Extensions: 7 present
     Extension: ExtKeyUsageSyntax (OID.2.5.29.37)
     Critical: false
     Usage oids: 1.3.6.1.5.5.7.3.1,
     Extension: KeyUsage (OID.2.5.29.15)
     Critical: false
     Usages: digitalSignature, keyEncipherment,
     Extension: SubjectKeyIdentifier (OID.2.5.29.14)
     Critical: false
     keyID: 8e9c68b7e4acc73c6734b1df3d9ca0a7ccb7183d
     Extension: AuthorityKeyIdentifier (OID.2.5.29.35)
     Critical: false
     keyID: 88c4622540d7efbbdac1af207249c77c287f9c6c
     Extension: CRLDistributionPoints (OID.2.5.29.31)
     Critical: false
     distributionPoint
        fullName: 1 names
          1) ldap:///CN=mydomain-CA,CN=UK-CA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=mydomain,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint (uri)
     Extension: AuthorityInfoAccessSyntax (OID.1.3.6.1.5.5.7.1.1)
     Critical: false
     accessMethod: 1.3.6.1.5.5.7.48.2
     accessLocation: ldap:///CN=mydomain-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=mydomain,DC=com?cACertificate?base?objectClass=certificationAuthority (uri)
     Extension: (OID.1.3.6.1.4.1.311.20.2)
     Critical: false
     Value: 04141e12005700650062005300650072007600650072 ]
Signature:
lots of text
]-----BEGIN CERTIFICATE-----
certificate characters
-----END CERTIFICATE-----
no sign of subject alternate names in those details so am not sure how i would change this
on your cucm system are your host details listed as ip address or host name, mine are listed as ip address and perhaps the certificate mismatch is caused by these settings?
Host Name/IP Address Description
10.33.2.20 PUBLISHER
10.33.2.21 SUBSCRIBER 1
if the cucm servers were listed as uk-cucm-pub or uk-cucm-pub.mydomain.com and uk-cucm-sub.mydomain.com perhaps it would accept the certificates
web-security
Version: V3
Serial Number: 441991719279266168307794
SignatureAlgorithm: SHA1withRSA (1.2.840.113549.1.1.5)
Issuer Name: CN=Accel-CA, DC=accel, DC=com
Validity From: Mon Oct 28 15:32:30 GMT 2013
           To:   Wed Oct 28 15:32:30 GMT 2015
Subject Name: CN=uk-cucm-pub.accel.com, OU=IT, O=Accel, L=London, ST=London, C=GB
Key: RSA (1.2.840.113549.1.1.1)
    Key value: 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
Extensions: 7 present
     Extension: ExtKeyUsageSyntax (OID.2.5.29.37)
     Critical: false
     Usage oids: 1.3.6.1.5.5.7.3.1,
     Extension: KeyUsage (OID.2.5.29.15)
     Critical: false
     Usages: digitalSignature, keyEncipherment,
     Extension: SubjectKeyIdentifier (OID.2.5.29.14)
     Critical: false
     keyID: 8e9c68b7e4acc73c6734b1df3d9ca0a7ccb7183d
     Extension: AuthorityKeyIdentifier (OID.2.5.29.35)
     Critical: false
     keyID: 88c4622540d7efbbdac1af207249c77c287f9c6c
     Extension: CRLDistributionPoints (OID.2.5.29.31)
     Critical: false
     distributionPoint
        fullName: 1 names
          1) ldap:///CN=Accel-CA,CN=UK-CA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=accel,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint (uri)     [
     Extension: AuthorityInfoAccessSyntax (OID.1.3.6.1.5.5.7.1.1)
     Critical: false
     accessMethod: 1.3.6.1.5.5.7.48.2
     accessLocation: ldap:///CN=Accel-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=accel,DC=com?cACertificate?base?objectClass=certificationAuthority (uri)
     Extension: (OID.1.3.6.1.4.1.311.20.2)
     Critical: false
     Value: 04141e12005700650062005300650072007600650072 ] Signature:
0000: 90 e8 32 00 2e f3 58 ec 18 20 6d 54 0a 49 9c ce [..2...X.. mT.I..]
0010: 94 90 02 6e 2f 15 1e f2 c3 6c 45 96 14 8e ff 25 [...n/....lE....%]
0020: 39 db 50 08 03 3b 48 a3 c7 69 7a 03 76 d1 e3 3d [9.P..;H..iz.v..=]
0030: 73 94 08 7c d3 13 f2 7c 58 ff ba 26 47 ed 6a 50 [s..|...|X..&G.jP]
0040: 9d 80 f8 64 cc dd 34 9f 95 32 3f 7f 32 04 f4 8b [...d..4..2?.2...]
0050: 86 e3 9d 23 03 06 06 ad f2 1b e0 0a a6 ed c0 3d [...#...........=]
0060: d4 dd 57 0f 61 d3 2b 14 d1 d0 3e c4 3a e3 df ac [..W.a.+...>.:...]
0070: c7 b8 dd 37 ba e2 e6 aa 35 a1 9b 7d 27 b8 d0 5a [...7....5..}'..Z]
0080: d9 cc d9 89 90 e0 72 de b1 32 4d d2 fc c8 2e c0 [......r..2M.....]
0090: a1 f9 57 8e b7 9d 1d 00 d8 a8 4d 26 ed c6 92 f6 [..W.......M&....]
00a0: 99 7a 1c ee 58 8d 76 20 7b af a1 54 0b 57 c3 d3 [.z..X.v {..T.W..]
00b0: 92 1f 64 d0 04 22 ae 17 c2 2a 1d d1 83 e0 c3 85 [..d.."...*......]
00c0: 67 4e 94 67 65 e8 e2 39 87 ef 78 f7 41 7e bd 34 [gN.ge..9..x.A~.4]
00d0: 79 8d be ae 45 5c 56 73 1d 6c 02 bf 3a 93 b4 a9 [y...E\Vs.l..:...]
00e0: f8 80 76 f1 ad 42 6e 42 cd 54 00 1e ca c5 b8 98 [..v..BnB.T......]
00f0: 05 a4 dd 3c 89 47 7b 4a 61 af 4b 32 2c 0c 96 a6 [...<.G{Ja.K2,...]]-----BEGIN CERTIFICATE-----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==
-----END CERTIFICATE-----

Jabber for Windows 9.2 Deskphone Control

Hi,
I have a deployment with:
CUCM 9.1(1a) (9.1.1.20000-5)
IM and Presence 9.1(1a) 9.1.1.20000-5
Jabber for Windows 9.2.3(4417)
I have got most features working but Deskphone Control is not working. I can see the devices associated with my user from within Jabber when I select "Use my phone for calls" but cannot control them.
The connection status page shows the correct IP address for the CTI server.
I have spent hours reading through various documents and forums which seem to contain contradictory advice.
To clarify theserver versions that I have deployed support the new UC Services which are referenced from a Service Profile which is assigned to the user.
I am not making any progress resolving this issue. Does anyone have any advice on how to move forward with this?
Thanks
James

Hi Daniel,
we have a Problem with AD-User and DeskPhone ...
The "Active Local User" can control a DeskPhone
The "Active LDAP Synchronized User" can't control a DeskPhone from same PC, but he can controll a Softphone.
Cisco UCM - 9.1.2.10000-28 with LDAP Sync/Auth via 3269 (success)
Cisco UCMIMP - 9.1.1.31900-1
Cisco Jabber - 9.6.0 Build 17088
564 INFO [0x0000226c] [src\common\thread\WorkerThread.cpp(94)] [csf.ecc] [run] - Started thread: CtiConnection
564 DEBUG [0x0000226c] [utilities\socket\TcpSocketHelper.cpp(82)] [csf.ecc] [connect] - About to connect to 172.20.1.11
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(957)] [csf.ecc] [SendRequest] - CDPProvider::SendRequest, msg.sequenceNumber=1, pObject=0477A214, pdunames[msg.msgID]=PROVIDER_OPEN_REQUEST
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(967)] [csf.ecc] [SendRequest] - SendRequest setting msg.sequenceNumber to , msg.sequenceNumber=2
564 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(330)] [csf.ecc] [encode] - Message::encode: , msg.protoVersion=0x000e0000, msg.msgID=3, sizeof(Header)=32, fixedSize=108, varSize=90
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(973)] [csf.ecc] [SendRequest] - SendRequest Succeed., pdunames[msg.msgID]=PROVIDER_OPEN_REQUEST, msg.sequenceNumber=2
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(986)] [csf.ecc] [SendEvent] - CDPProvider::SendEvent, pObject=0477A210, nType=1001
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(919)] [csf.ecc] [OnEvent] - CDPProvider::OnEvent, pObject=0477A210, nType=1001, pvThis=0477A210
564 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(317)] [csf.ecc] [ecc::DeskPhoneConnectionContext::OnProviderEventUpdated] - OnProviderEventUpdated(1001), state=STATE_INITIAL_LOGIN, loginstate=LOGINSTATE_OPENING
564 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1148)] [csf.ecc] [DispatchTheMessage] - CDPProvider::DispatchTheMessage, nPduNum=4, pduName=PROVIDER_OPEN_RESPONSE
564 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1232)] [csf.ecc] [DispatchTheMessage] - Received , pdunames[nPduNum]=PROVIDER_OPEN_RESPONSE, seqNum=2
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(267)] [csf.ecc] [HandleMessage] - CDPProvider::HandleMessage, nPduNum=4
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(407)] [csf.ecc] [HandleResponse_ProviderOpen] - CDPProvider::HandleResponse_ProviderOpen
564 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(360)] [csf.ecc] [decode] - Message::decode: , totalSize=107, type=0, magic=4294958557, msg.protoVersion=0x000e0000, pduNum=4, hdrSize=32, fixedSize=52, varSize=31
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(415)] [csf.ecc] [HandleResponse_ProviderOpen] - CUCM protocol version: , resp.getProtoVersion()=0x000e0000
564 WARN [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1026)] [csf.ecc] [ResetHeartbeatTimer] - m_heartbeatIntervalS not set, timeout not set.
845 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1148)] [csf.ecc] [DispatchTheMessage] - CDPProvider::DispatchTheMessage, nPduNum=126, pduName=PROVIDER_OPEN_COMPLETED_EVENT
845 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1290)] [csf.ecc] [DispatchTheMessage] - PDUTYPE_ProviderEvent or PDUTYPE_Heartbeat, nPduNum=126, pdunames[nPduNum]=PROVIDER_OPEN_COMPLETED_EVENT
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(267)] [csf.ecc] [HandleMessage] - CDPProvider::HandleMessage, nPduNum=126
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(488)] [csf.ecc] [HandleEvent_ProviderOpenCompleted] - CDPProvider::HandleEvent_ProviderOpenCompleted
845 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(360)] [csf.ecc] [decode] - Message::decode: , totalSize=161, type=0, magic=4294958557, msg.protoVersion=0x000e0000, pduNum=126, hdrSize=32, fixedSize=72, varSize=65
845 WARN [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(502)] [csf.ecc] [HandleEvent_ProviderOpenCompleted] - ProviderOpen failed: reason: 0x8ccc0060, Directory login failed - authentication failed.
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(986)] [csf.ecc] [SendEvent] - CDPProvider::SendEvent, pObject=0477A210, nType=1008
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(919)] [csf.ecc] [OnEvent] - CDPProvider::OnEvent, pObject=0477A210, nType=1008, pvThis=0477A210
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(317)] [csf.ecc] [ecc::DeskPhoneConnectionContext::OnProviderEventUpdated] - OnProviderEventUpdated(1008), state=STATE_INITIAL_LOGIN, loginstate=LOGINSTATE_LOGGING_IN
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(891)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - create DPLogoutWorkItem
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(892)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - Setting _loginState = LOGINSTATE_DISCONNECTING
845 DEBUG [0x0000226c] [c\deskphonewrapper\CC_DPService.cpp(926)] [csf.ecc] [ecc::CC_DPService::raiseLoginFailure] - raiseLoginFailure(5)
845 DEBUG [0x000013a0] [pper\DeskPhoneConnectionContext.cpp(898)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::run] - DPLogoutWorkItem::run()
845 INFO [0x0000226c] [\deskphonewrapper\CC_DPService.cpp(1078)] [csf.ecc] [ecc::CC_DPService::notifyConnectionStatusObservers] - dispatching ConnectionStatus Change eIdle
845 DEBUG [0x00002788] [c\deskphonewrapper\CC_DPService.cpp(298)] [csf.ecc] [ecc::CC_DPService::start] - Finished waiting for deskphone to go in to service...
845 INFO [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(218)] [csf.ecc] [Close] - CDPProvider::Close
845 INFO [0x0000226c] [control\CallControlManagerImpl.cpp(3092)] [csf.ecc.evt] [ecc::CallControlManagerImpl::notifyConnectionStatusChange] - CONNECTION_STATUS_CHANGE: eIdle
845 ERROR [0x00002788] [control\CallControlManagerImpl.cpp(1989)] [csf.ecc] [ecc::CallControlManagerImpl::doConnect] - doConnect() returnCode : AuthentincationFailure
845 DEBUG [0x000017a0] [s\telephonyservice\ECCObservers.cpp(153)] [csf-unified.telephony.ECCObserverLogger] [ECCObservers::onConnectionStatusChange] - onConnectionStatusChange(status = eIdle).
845 DEBUG [0x0000226c] [\deskphonewrapper\CC_DPService.cpp(1014)] [csf.ecc] [ecc::CC_DPService::raiseProviderStateChange] - Got cxn change, disconnecting deskphone video Idle
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(957)] [csf.ecc] [SendRequest] - CDPProvider::SendRequest, msg.sequenceNumber=2, pObject=0477A214, pdunames[msg.msgID]=PROVIDER_CLOSE_REQUEST
845 ERROR [0x00002788] [control\CallControlManagerImpl.cpp(2025)] [csf.ecc] [ecc::CallControlManagerImpl::doConnect] - doConnect() returnCode : eDeviceRegAuthenticationFailure
845 DEBUG [0x000017a0] [elephonyservice\BackgroundWorker.cpp(35)] [csf-unified.telephony.BackgroundWorkerLogger] [BackgroundWorker::doTask] - Adding new task to BackgroundWorker. Task name is: TelephonyAdapter::onConnectionStatusChange
845 INFO [0x0000226c] [rc\deskphonevideo\DeskPhoneVideo.cpp(76)] [csf.ecc] [ecc::DeskPhoneVideo::disconnect] - disconnecting
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(967)] [csf.ecc] [SendRequest] - SendRequest setting msg.sequenceNumber to , msg.sequenceNumber=3
845 INFO [0x00002788] [control\CallControlManagerImpl.cpp(2411)] [csf.ecc] [ecc::CallControlManagerImpl::doDisconnect] - --->
845 DEBUG [0x000017a0] [common\processing\TaskDispatcher.cpp(29)] [TaskDispatcher] [Processing::TaskDispatcher::enqueue] - Enqueue TelephonyAdapter::onConnectionStatusChange - Queue Size: 9
845 DEBUG [0x0000226c] [c\deskphonevideo\DeskPhoneVideo.cpp(315)] [csf.ecc] [ecc::DeskPhoneVideo::stopCdp] - Stopping CDP
845 DEBUG [0x000013a0] [oneprovider\QBE\ProtocolElement.cpp(330)] [csf.ecc] [encode] - Message::encode: , msg.protoVersion=0x000e0000, msg.msgID=9, sizeof(Header)=32, fixedSize=4, varSize=0
845 INFO [0x00002788] [pper\DeskPhoneConnectionContext.cpp(267)] [csf.ecc] [ecc::DeskPhoneConnectionContext::stop] - DeskPhoneConnectionContext::stop
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(973)] [csf.ecc] [SendRequest] - SendRequest Succeed., pdunames[msg.msgID]=PROVIDER_CLOSE_REQUEST, msg.sequenceNumber=3
845 DEBUG [0x0000226c] [c\deskphonevideo\DeskPhoneVideo.cpp(318)] [csf.ecc] [ecc::DeskPhoneVideo::stopCdp] - CDP stopped
845 INFO [0x000017a0] [src\AccessoriesManager.cpp(234)] [csf.accessory.event] [accessory::AccessoriesManager::onConnectionStatusChange] - Received onConnectionStatusChange - eIdle
845 DEBUG [0x00002788] [pper\DeskPhoneConnectionContext.cpp(891)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - create DPLogoutWorkItem
845 INFO [0x000013a0] [\deskphoneprovider\CtiConnection.cpp(49)] [csf.ecc] [stop] - CtiConnection::stop
Thanks,
Guennadi

Jabber For Windows deskphone control

All,
This is my last stop before getting with TAC and I just wanted to see if anyone has had and resolved this issue:
Jabber for Windows (all versions up to 9.1) Desk phone control most times takes several attempts to become active and working. If the client is shut down, the client defaults to Computer for calls and it takes several more attempts to get desk phone working again (half the time I get a red X over device option icon.
Anyone else experienced this or have a suggestion?
CUCM8.5
Presence 8.6
Gareth

Richard,
I managed to get everything working again (hopefully!).
I removed all devices from my prefile and re added them, as well as restarting the presence service and CTI service in CUCM. Seems to have done the trick for now.
Gareth

Jabber for Windows cannot control 8841 desk phone

Hello Team,
We have a problem with desktop phone control in case of 8841 phone.
When the user try to switch to the 8841 phone in Jabber then we got the following error message in the log:
2014-11-07 09:39:53,855 ERROR [0x00000298] [ice\TelephonyAdapterPhoneDevice.cpp(178)] [TelephonyAdapter] [TelephonyAdapter::selectDeviceImpl] - switchMode to device [SEP84802D7698D6] failed with error [eDeviceRegCouldNotOpenDevice]
We get the red X on the phone icon, and the desktop phone control is not working.
If the same user try to control 7940 phone, then it's working fine.
The environment: UCM 9.1.2.12901-3, CUPS 9.1.1.51900-5, Jabber for Windows 10-5.2
Edited:
Same issue with UCM 10.5.1, CUPS 10.5.1, and Jabber for Windows 10.5.2.
Regards,
Zsolt

Hi Zolt,
The RT phones need below end user permissions also in order to control deakphones:
Standard CTI Allow Control of Phones supporting Connected Xfer and conf
Standard CTI Allow Control of Phones supporting Rollover Mode
If they are not added, please add these permission.
Regards

Jabber for Windows 9.1 external contact adding

Similar Messages

Maybe you are looking for